Optimising the life cycle energy performance of residential buildings

A holistic approach to low-energy building design is essential to ensure that any efficiency improvement strategies provide a net energy benefit over the life of the building. Previous work by the authors has established a model for informing low-energy building design based on a comparison of the life cycle energy demand associated with a broad range of building assemblies. This model ranks assemblies based on their combined initial and recurrent embodied energy and operational energy demand. The current study applies this model to an actual residential building in order to demonstrate the application of the model for optimising a building’s life cycle energy performance. The aim of this study was to demonstrate how the availability of comparable energy performance information at the building design stage can be used to better optimise a building’s energy performance. The life cycle energy demand of the case study building, located in the temperate climate of Melbourne, Australia, was quantified using a comprehensive embodied energy assessment technique and TRNSYS thermal energy simulation software. The building was then modelled with variations to its external assemblies in an attempt to optimise its life cycle energy performance. The alternative assemblies chosen were those shown through the author’s previous modelling to result in the lowest life cycle energy demand for each building element. The best performing assemblies for each of the main external building elements were then combined into a best-case scenario to quantify the potential life cycle energy savings possible compared to the original building. The study showed that significant life cycle energy savings are possible through the modelling of individual building elements for the case study building. While these findings relate to a very specific case, this study demonstrates the application of a model for optimising building life cycle energy performance that may be applied more broadly during early-stage building design to optimise life cycle energy performance.

Study on the visual performance of a traditional residential neighborhood in old Cairo

Traditional dwellings located in the hot arid zones of the Arabian regions are well known for their sensitive architectural response to the region’s climatic conditions and socio-cultural norms. The majority of these dwellings are well recognized for their courtyard arrangement and perforated fenestration system that evolved to control the harsh solar, climatic conditions without compromising the aesthetic quality of space and occupants’ wellbeing. However, the unique visual characteristics of these structures cannot be fully appreciated by assessing the visual performance of buildings in isolation from their urban context. Given the fact that much of the character of the traditional settlements of this region came from the collective visual perception of their architectural components as well as urban patterns. This paper presents a methodology that can be used to assess daylight behaviour at an architectural level as well as at an urban scale. The work examines the daylight behaviour of a well-known historic alleyway and of a courtyard house in the old city of Cairo. The variability in the visual perception and comfort for a typical pedestrian street and the occupants of the house was predicted using Radiance IES simulation modelling tool and a scaled model under an artificial sky dome. A comparative analysis between simulated results and measured values at target points was conducted and the results reveal a reasonable agreement with the simulation results. Preliminary results from the first phase of modelling were presented that give an insight into the overall visual experience in the traditional settlements in the Old City of Cairo where daylight has contributed to the place unique sense of identity.

A study of building materials to create an identity of traditional Balinese architecture for urban housing

The use or local architecture characteristics is regulated by the spatial planning and building code of Indonesia. Balinese tmditional architecture has existed, coloured the traditional architecture of Indonesia and can be used as Bali's identity that is different from other regions in Indonesia.On the other hand, the cost of such building is high and most of people in urban areas are unable to afford to build in the traditional architecture style, especially in the residential housing sector .. Some of the major components that determine the price of housing units are the price of land, building materials, labour and technology. In developing countries, the first and second components that affect the unit price of the building are building materials representing about 70% and skilled labour respectively (Ural, 1980). Based on this, a good strategy to adopt in order to minimize the price is to manipulate these two components.Based on a literature review and observation, this study will explain which aspects of building material technology can reduce the building cost and how it can maintain the identity of local architecture.The results of the study indicate that the building material can be created to both reduce cost and adopt traditional architecture style as an identity. The materials have some shapes that can be joined easily to facilitate the skill of the worker and yet still be able to adopt the forms of traditional Balinese architecture.

Reliability and validity of a new Building Environmental Quality Questionnaire

This study aimed to develop and then test the reliability and validity of a new self-report questionnaire method called the building environmental quality questionnaire (BEQQ) designed to assess the perceived environmental quality in residential apartments in Hong Kong. A total of 108 (46 men and 62 women) Chinese-speaking residents, between 16 and 81 years of age, took part and completed the questionnaire study. The subjects were recruited from 12 different buildings of three distinct quality ratings (low, medium and high) assigned by the building assessment tool called the building health and hygiene index (BHHI). The study was evaluated to determine reliability and this was assessed involving 20 of the participants (18% of the total sample size). The BEQQ was found to have good test-retest reliability, with intra-class correlation coefficient (ICC) values typically around 0.70. The validity testing, also using ICCs, generated moderate to high values for all BEQQ sub-categories (the mean value was around 0.80), indicating a good consistency among residents living within the same building. Finally, the summary BEQQ scores were significantly correlated (—0.68) with the BHHI ratings as the criterion standard. It is concluded that this eight-dimension instrument would provide a short and efficient questionnaire method to obtain self-reported information to determine the perceived residential building quality. The method was shown to yield adequate reliability and has been validated for use in empirical research.

A new urban planning code's impact on walking: The residential environments project

Objectives. We examined whether people moving into a housing development designed according to a state government livable neighborhoods subdivision code engage in more walking than do people who move to other types of developments.

Methods. In a natural experiment of 1813 people building homes in 73 new housing developments in Perth, Western Australia, we surveyed participants before and then 12 and 36 months after moving. We measured self-reported walking using the Neighborhood Physical Activity Questionnaire and collected perceptions of the environment and self-selection factors. We calculated objective measures of the built environment using a Geographic Information System.

Results. After relocation, participants in livable versus conventional developments had greater street connectivity, residential density, land use mix, and access to destinations and more positive perceptions of their neighborhood (all P < .05). However, there were no significant differences in walking over time by type of development (P > .05).

Conclusions. Implementation of the Livable Neighborhoods Guidelines produced more supportive environments; however, the level of intervention was insufficient to encourage more walking. Evaluations of new urban planning policies need to incorporate longer term follow-up to allow time for new neighborhoods to develop.

Seasonal coolth storage system for residential buildings in Australia

Night sky cooling is explored as an alternative to the conventional cooling technologies using fossil fuels. The night sky cooling method is based on the long wave radiation of unglazed collectors to the sky at night. An evaluation of the night sky cooling system is present for a residential building in three cities of Australia, namely Alice Springs, Darwin and Melbourne. The system comprises an unglazed flat plate solar collector integrated with borehole storage. It uses night sky radiation to reduce the temperature of the ground near to the boreholes. The system was simulated with TRNSYS, a transient simulation program. The simulation results for adequately sized systems show that night sky radiation is able to reduce the coolth storage borehole temperature and the proposed system is able to meet the cooling load of the residential building simulated in three locations. Borehole lengths of 270, 318 and 106 m are required for coolth storage with 90, 260 and 14 m2 collector area for heat rejection in Alice Springs, Darwin and Melbourne, respectively. At the 20th simulation year, the proposed system is able to achieve a system cooling coefficient of performance of 2.2 in Alice Springs, and 2.8 in Darwin and Melbourne.

A comprehensive framework for assessing the life-cycle energy of building construction assemblies

Building environmental design typically focuses on improvements to operational efficiencies such as building thermal performance and system efficiency. Often the impacts occurring across the other stages of a building's life are not considered or are seen as insignificant in comparison. However, previous research shows that embodied impacts can be just as important. There is limited consistent and comprehensive information available for building designers to make informed decisions in this area. Often the information that is available is from disparate sources, which makes comparison of alternative solutions unreliable. It is also important to ensure that strategies to reduce environmental impacts from one life cycle stage do not come at the expense of an increase in overall life-cycle impacts. A consistent and comprehensive framework for assessing and specifying building assemblies for enhanced environmental outcomes does not currently exist. This article presents the initial findings of a project that aims to establish a database of life cycle energy requirements for a broad range of construction assemblies, based on a comprehensive assessment framework. Life cycle energy requirements have been calculated for eight residential construction assemblies integrating an innovative embodied energy assessment technique with thermal performance modelling and ranked according to their performance. © #2010 Earthscan ISSN: 0003-8628.

Orientation, building height and sky view factor as energy efficiency design parameters

The energy efficiency of buildings should be a goal at the pre-design phase, though the importance of the design variables is often neglected even during the design process. Highlighting the relevance of these design variables, this research studies the relationships of building location variables with the electrical energy consumption of residential units. The following building design parameters are considered: orientation, story height and sky view factor (SVF). The consideration of the SVF as a location variable contributes to the originality of this research. Data of electrical energy consumption and users' profiles were collected and several variables were considered for the development of an Artificial Neural Network model. This model allows the determination of the relative importance of each variable. The results show that the apartments' orientation is the most important design variable for the energy consumption, although the story height and the sky view factor play a fundamental role in that consumption too. We pointed out that building heights above twenty-four meters do not optimize the energy efficiency of the apartments and also that an increasing SVF can influence the energy consumption of an apartment according to their orientation.

A prediction model for assessing residential radon concentration in Switzerland

Indoor radon is regularly measured in Switzerland. However, a nationwide model to predict residential radon levels has not been developed. The aim of this study was to develop a prediction model to assess indoor radon concentrations in Switzerland. The model was based on 44,631 measurements from the nationwide Swiss radon database collected between 1994 and 2004. Of these, 80% randomly selected measurements were used for model development and the remaining 20% for an independent model validation. A multivariable log-linear regression model was fitted and relevant predictors selected according to evidence from the literature, the adjusted R², the Akaike's information criterion (AIC), and the Bayesian information criterion (BIC). The prediction model was evaluated by calculating Spearman rank correlation between measured and predicted values. Additionally, the predicted values were categorised into three categories (50th, 50th-90th and 90th percentile) and compared with measured categories using a weighted Kappa statistic. The most relevant predictors for indoor radon levels were tectonic units and year of construction of the building, followed by soil texture, degree of urbanisation, floor of the building where the measurement was taken and housing type (P-values <0.001 for all). Mean predicted radon values (geometric mean) were 66 Bq/m³ (interquartile range 40-111 Bq/m³) in the lowest exposure category, 126 Bq/m³ (69-215 Bq/m³) in the medium category, and 219 Bq/m³ (108-427 Bq/m³) in the highest category. Spearman correlation between predictions and measurements was 0.45 (95%-CI: 0.44; 0.46) for the development dataset and 0.44 (95%-CI: 0.42; 0.46) for the validation dataset. Kappa coefficients were 0.31 for the development and 0.30 for the validation dataset, respectively. The model explained 20% overall variability (adjusted R²). In conclusion, this residential radon prediction model, based on a large number of measurements, was demonstrated to be robust through validation with an independent dataset. The model is appropriate for predicting radon level exposure of the Swiss population in epidemiological research. Nevertheless, some exposure misclassification and regression to the mean is unavoidable and should be taken into account in future applications of the model.

Prediction of residential radon exposure of the whole Swiss population: comparison of model-based predictions with measurement-based predictions

Radon plays an important role for human exposure to natural sources of ionizing radiation. The aim of this article is to compare two approaches to estimate mean radon exposure in the Swiss population: model-based predictions at individual level and measurement-based predictions based on measurements aggregated at municipality level. A nationwide model was used to predict radon levels in each household and for each individual based on the corresponding tectonic unit, building age, building type, soil texture, degree of urbanization, and floor. Measurement-based predictions were carried out within a health impact assessment on residential radon and lung cancer. Mean measured radon levels were corrected for the average floor distribution and weighted with population size of each municipality. Model-based predictions yielded a mean radon exposure of the Swiss population of 84.1 Bq/m(3) . Measurement-based predictions yielded an average exposure of 78 Bq/m(3) . This study demonstrates that the model- and the measurement-based predictions provided similar results. The advantage of the measurement-based approach is its simplicity, which is sufficient for assessing exposure distribution in a population. The model-based approach allows predicting radon levels at specific sites, which is needed in an epidemiological study, and the results do not depend on how the measurement sites have been selected.

The Impact of Family Stressors on the Social Development of Adolescents Admitted to a Residential Treatment Facility

The focus of this research was to determine the impact of family stressors on the social development of adolescents at admission to long-term mental health residential care. The study was conducted at the Waco Center for Youth, the only long-term residential care agency serving emotionally and behaviorally challenged adolescents and their families that functions under the authority of the Texas Department of State Health Services. Data was obtained from social assessment forms (N=457) in case records of clients. The prevalence of problem behaviors exhibited by the youth upon entry to the residential facility was examined and it was found that the youth entering the facility were experiencing severe impairment in their social development across several domains. Results indicated that youth with more family stressors exhibited significantly greater impairment in their social development (b = .19, p = .000) which suggests that the combination of multiple stressors within a family inhibits adolescent social development. The research supports a family systems approach to treatment that focuses on building family strengths and actively involving family in the intervention process.

Building the capacity for learning and change through reflective conversation

Conversation is central to the process of organizational learning and change. Drawing on the notion of reflective conversation, we describe an action research project, "learning through listening" in Omega, a residential healthcare organization. In this project, service users, staff, members of management committees, trustees, managers, and central office staff participated in listening to each other and in working together towards building capacity for creating their own vision of how the organization could move into the future, according to its values and ethos. In doing so they developed ways of engaging in reflective conversation that enabled progress towards a strategic direction.

Next Generation of Energy Residential Gateways for Demand Response and Dynamic Pricing

Predictions about electric energy needs, based on current electric energy models, forecast that the global energy consumption on Earth for 2050 will double present rates. Using distributed procedures for control and integration, the expected needs can be halved. Therefore implementation of Smart Grids is necessary. Interaction between final consumers and utilities is a key factor of future Smart Grids. This interaction is aimed to reach efficient and responsible energy consumption. Energy Residential Gateways (ERG) are new in-building devices that will govern the communication between user and utility and will control electric loads. Utilities will offer new services empowering residential customers to lower their electric bill. Some of these services are Smart Metering, Demand Response and Dynamic Pricing. This paper presents a practical development of an ERG for residential buildings.

The Economic Value of Residential Land in Historical Areas: An Application of the Residual Method to the Secondary Market

Land value bears significant weight in house prices in historical town centers. An essential aim for regulating the mortgage market, particularly in the financial and property crisis that countries such as Spain are undergoing, is to have at hand objective procedures for its valuation, whatever the conditions (location, construction, planning). Of all the factors contributing to house price make-up, the land is the only one whose value does not depend on acquisition cost, but rather on the location-time binomial. That is to say, the specific circumstances at that point and at the exact moment of valuation. For this reason, the most commonly applied procedure for land valuation in town centers is the use of the residual method: once the selling price of new housing in a district is known, the other necessary costs and expenses of development are deducted, including those of building and the developer’s profit. The value left is that of the land. To apply these procedures it is vital to have figures such as building costs, technical fees, tax costs, etc. But, above all, it is essential to obtain the selling price of the new housing. This is not always feasible, on account of the lack of newbuild development in this location. This shortage of information occurs in historical town cities, where urban renewal is slight due to the heritage-protection policies, and where, nevertheless there is substantial activity in the secondary market. In these circumstances, as an alternative for land valuation in consolidated urban areas, we have the adaptation of the residual method to the particular characteristics of the secondary market. To these ends, there is the proposal for the appreciation of the dwelling which follows, in a backwards direction, the application of traditional depreciation methods proposed by the various valuation manuals and guidelines. The reliability of the results obtained is analyzed by contrasting it with published figures for newly-built properties, according to different rules applied in administrative appraisals in Spain and the incidence of an eventual correction due to conservation state.

Construction cost and energy consumption resulting from energy retrofitting in an apartment building in Madrid (Spain).

This theoretical study analyzes the relation between the measures necessesary for the energy retrofitting of a residential building constructed in Madrid, their cost and the improvement of the energy rating of the dwellings. The aim of this work is to establish an evaluation methodology that allows developers and architects to obtain conclusions and orientates therm in the decisioin-making process. It will allow finding the most suitable cost-effective solutions in each case. This paper describes the methodology and the findings obtained. Energy retrofitting and the improvement of the energy behaviour of the building depend on the selection of the retrofitting solutions and also on the investment. In this case study to achieve the best energy rates it is necessary to improve the thermal performance of the envelope as well as the energy systems. Energy retrofitting means an increase in property value but it can't only be considered in economic terms. It is necessary to take into account unquantifiable aspects as increased comfort, improved sound insulation, livability, health, or the elimination of energy poverty situations.