Discrete multicomponent model for biodiesel spray combustion simulation

An important first step in spray combustion simulation is an accurate determination of the fuel properties which affects the modelling of spray formation and reaction. In a practical combustion simulation, the implementation of a multicomponent model is important in capturing the relative volatility of different fuel components. A Discrete Multicomponent (DM) model is deemed to be an appropriate candidate to model a composite fuel like biodiesel which consists of four components of fatty acid methyl esters (FAME). In this paper, the DM model is compared with the traditional Continuous Thermodynamics (CTM) model for both diesel and biodiesel. The CTM model is formulated based on mixing rules that incorporate the physical and thermophysical properties of pure components into a single continuous surrogate for the composite fuel. The models are implemented within the open-source CFD code OpenFOAM, and a semi-quantitative comparison is made between the predicted spray-combustion characteristics and optical measurements of a swirl-stabilised flame of diesel and biodiesel. The DM model performs better than the CTM model in predicting a higher magnitude of heat release rate in the top flame brush region of the biodiesel flame compared to that of the diesel flame. Using both the DM and CTM models, the simulation successfully reproduces the droplet size, volume flux, and droplet density profiles of diesel and biodiesel. The DM model predicts a longer spray penetration length for biodiesel compared to that of diesel, as seen in the experimental data. Also, the DM model reproduces a segregated biodiesel fuel vapour field and spray in which the most abundant FAME component has the longest vapour penetration. In the biodiesel flame, the relative abundance of each fuel component is found to dominate over the relative volatility in terms of the vapour species distribution and vice versa in the liquid species distribution. © 2014 Elsevier Ltd. All rights reserved.

Modelling of turbulent lifted jet flames using flamelets: A priori assessment and a posteriori validation

This study focuses on the modelling of turbulent lifted jet flames using flamelets and a presumed Probability Density Function (PDF) approach with interest in both flame lift-off height and flame brush structure. First, flamelet models used to capture contributions from premixed and non-premixed modes of the partially premixed combustion in the lifted jet flame are assessed using a Direct Numerical Simulation (DNS) data for a turbulent lifted hydrogen jet flame. The joint PDFs of mixture fraction Z and progress variable c, including their statistical correlation, are obtained using a copula method, which is also validated using the DNS data. The statistically independent PDFs are found to be generally inadequate to represent the joint PDFs from the DNS data. The effects of Z-c correlation and the contribution from the non-premixed combustion mode on the flame lift-off height are studied systematically by including one effect at a time in the simulations used for a posteriori validation. A simple model including the effects of chemical kinetics and scalar dissipation rate is suggested and used for non-premixed combustion contributions. The results clearly show that both Z-c correlation and non-premixed combustion effects are required in the premixed flamelets approach to get good agreement with the measured flame lift-off heights as a function of jet velocity. The flame brush structure reported in earlier experimental studies is also captured reasonably well for various axial positions. It seems that flame stabilisation is influenced by both premixed and non-premixed combustion modes, and their mutual influences. © 2014 Taylor & Francis.

The Apertospathulidae, a new family of haptorid ciliates (Protozoa, Ciliophora)

We studied the morphology of three rare haptorid ciliates, using live observation and silver impregnation: Apertospathula verruculifera n. sp., Longispatha elegans n. gen., n. sp., and Rhinothrix porculus (Penard, 1922) n. gen., n. comb. Simple ethanol fixation (50-70%, v/v) is recommended to reveal the ciliary pattern of "difficult" ciliates, such as R. porculus, by protargol impregnation. The three genera investigated have a distinct feature in common, viz., a lasso-shaped oral bulge and circumoral kinety, where the right half is slightly to distinctly longer than the left and the circumoral kinety is open ventrally. Thus, they are united in a new spathidiid family, the Apertospathulidae n. fam., which probably evolved from a Bryophyllum-like ancestor by partial reduction of the oral bulge and circumoral kinety. Apertospathula verruculifera has a wart-like process, the palpus dorsalis, at the anterior end of the dorsal brush. The right branch of the circumoral kinety is only slightly longer than the left one. Longispatha elegans has a straight oral bulge and circumoral kinety, the right branch of which extends to the posterior end of the body while the left branch ends in the anterior third of the body. Rhinothrix porculus, a curious ciliate with a snout-like dorsal elongation of the oral bulge, the palpus oralis, has a highly characteristic ciliary pattern: the oral pattern is as in Longispatha, but the bulge and circumoral kinety extend spirally to the posterior end of the body while the somatic kinetics course meridionally. This is achieved by inserting some shortened kinetics in the curves of the oral bulge.

Descriptions of Protospathidium serpens (Kahl, 1930) and P-fraterculum n. sp (Ciliophora, Haptoria), two species based on different resting cyst morphology

Protospathidium serpens (Kahl, 1930) is frequent in semiterrestrial and terrestrial habitats worldwide. Conventionally, all populations are considered as conspecific because they have very similar overall morphologies and morphometrics. We studied in detail not only the morphology of the vegetative cells but also the resting cysts using live observation, protargol impregnation, and scanning electron microscopy. These revealed a cryptic diversity and biogeographic pattern in details of the dorsal brush and cyst wall morphology. The cyst wall is spiny in the Austrian specimens, while smooth in the South African and Antarctic populations. Accordingly, P. serpens consists of at least two species: P. serpens (with spiny cyst wall) and P. fraterculum n. sp. (with smooth cyst wall); the latter is probably composed of two distinct taxa differing by the absence (South African)/presence (Antarctic) of a monokinetidal bristle tail in brush row 3, the number of dikinetids comprising brush row 1 (seven versus three), and the total number of brush dikinetids (29 versus 17). Protospathidium serpens is neotypitied with the new population from Austria. The significance of resting cyst morphology is discussed with respect to alpha-taxonomy and overall ciliate diversity.

Fucoidan inhibits the development of proteinuria in active Heymann nephritis

Fucoidan, the sulphated polysaccharide extracted from brown seaweed, has various biological activities. The effect of fucoidan on the formation of proteinuria and renal functions in active Heymann nephritis was investigated in this study. Active Heymann nephritis was induced by administering brush border protein of rat proximal uriniferous tubules (FX1A). Fucoidan was administered by oral intubation to Heymann nephritis rats at three doses (50, 100 and 200 mg/kg) once daily for 4 weeks. The elevated urinary protein excretion and plasma creatinine due to the induction of Heymann nephritis were significantly reduced by fucoidan at doses of 100 and 200 mg/kg. The results indicated that fucoidan has a renoprotective effect on active Heymann nephritis and is a promising therapeutic agent for nephritis. Copyright (c) 2005 John Wiley F Sons, Ltd.

海洋救助机器人用钕铁硼永磁直流电动机设计

为中科院沈阳自动化研究所机器人中心研制了海洋救助机器人推进器用钕铁硼永磁直流电动机.针对该电动机设计的特殊性,重点论述电动机功率、电压、转速及主要尺寸的确定方法,主磁极、换向器和电刷装置的设计方法,对电动机的结构特点、电磁性能和实验结果也作了介绍.

渤海湾地区前第三系构造特征及其演化研究

Based on fine structural interpretation on seismic profiles of buried-hills in Huanghua depression, structural interpretation and balanced cross-section restoration of regional seismic profiles, drawing structural maps of main seismic interfaces, residual strata distribution of different ages in the Bohai Bay region and structural survey in the western Shandong uplifted area and the intracontinental orogeny of Yanshan mountain, the paper has studied pre-tertiary structural styles and tectonic evolution of the Bohai Bay region. There mainly develop 5 types of pre-tertiary structural style that are extension structure, compression structure, strike-slip structure, negative inversion structure and sliding structure in the Bohai Bay region. Among these 5 types of structural style, extension structure develops detachment fault and its controlling fault terrain structure and fault break slop; compression structure develops reverted fold, fault propagation fold, fault bent fold, imbricate thrust structure and triangle zone; strike-slip structure develops positive flower structure, negative flower structure, en-echelon structure and brush structure; negative reversion structure develops Indosinian compression and Yanshanian extension negative reversion structure, late Yanshanian compression and Cenozoic extension negative reversion structure; sliding structure develops interlayer sliding structure and detachment structure. According to Cangdong fault of SN direction, Zhangjiakou – Penglai fault and Qihe – Guangrao fault of NWW direction, the Bohai Bay region can be divided into 6 sub-regions in which structural direction and style is different from each other. Structural maps of bottom boundary of Cenozoic and upper Paleozoic manifest that main NNE structural direction is formed from late Yanshanian to Himalayan movement and minor NWW structural direction and a string of area more than 8000m are mainly suggest that Indosinian tectonic pattern strongly influence on Yanshanian and Himalayan movement. Residual strata distribution characteristics of middle to upper Neoproterozoic in the Bohai Bay region manifest that middle- to neo- aulacogen position may be corresponding to late Mesozoic uplifted zone. Residual Paleozoic distribution characteristics of main ENN suggest that structural alteration should be resulted from late Yanshanian to Himalayan movement while which of minor NWW structures suggest that deeper structure should restrict shallower structure. Structural patterns of main EW fold direction in the Bohai Bay region and thrust structure in eastern part are formed late Triassic in studied area. Granite magma intrusion of early to middle Jurassic mainly develops Yanshan mountain zone. Late Mesozoic rifting basins of NEE direction are widely distributed in the Bohai Bay region and granite magma intrusions are mainly distributed in Tancheng – Rongcheng zone. Mesozoic structural evolution in the Bohai Bay region is related to scissor convergent from east to west between North China plate and Yangtze plate and gradually reinforcing of the west circum-pacific tectonic tract while basin and range province of late Jurassic and early Cretaceous may be mainly related to lithospheric thinning of North China craton in late Mesozoic.

the social economy as an alternative of self employment. profile of the entrepreneur in the andalusian labour companies

This paper provides a quantitative and qualitative analysis of the profile of the entrepreneur who decides to start business through a labor society in the context of the Autonomous Community of Andalucia. Thus, first the Social Economy is presented as an important alternative to creating and promoting employment, which seeks to combine economic and social objectives in the development of activities. Subsequently, focusing on labor companies, updated its importance in the regional economy for later data and through the analysis of two samples are available, set the attributes or most significant characteristics of these entrepreneurs.

Isolation and culture of mouse intestinal cells.

Complex cell signal transduction mechanisms regulate intestinal epithelial shape, polarity, motility, organelles, cell membrane components as well as physical and mechanical properties to influence alimentary digestion, absorption, secretion, detoxification and fluid balance. Interactions between the epithelial cells and adjacent mesenchyme are central to intestinal homeostasis although the key regulatory molecules of specific differentiation steps remain unclear. Isolation and primary culture of heterotypic murine intestinal cells provides a model system for elucidation of essential molecular cross-talk between epithelium and mesenchyme that may provide several biological and practical advantages over transformed cell lines. An in vitro primary culture system for neonatal rat or mouse intestinal cells has been established that forms monolayers, expresses intestine-specific epithelial features including intestinal brush borders and appropriate hydrolase enzymes. Our studies confirm the promise of this method which may advance our understanding of heterotypic cellular interactions implicated in intestinal function and may provide important insights into the pathobiology of disease.