Adverse effects of industrial multiwalled carbon nanotubes on human pulmonary cells

The aim of this study was to evaluate adverse effects of multiwalled carbon nanotubes (MWCNT), produced for industrial purposes, on the human epithelial cell line A549. MWCNT were dispersed in dipalmitoyl lecithin (DPL), a component of pulmonary surfactant, and the effects of dispersion in DPL were compared to those in two other media: ethanol (EtOH) and phosphate-buffered saline (PBS). Effects of MWCNT were also compared to those of two asbestos fibers (chrysotile and crocidolite) and carbon black (CB) nanoparticles, not only in A549 cells but also in mesothelial cells (MeT5A human cell line), used as an asbestos-sensitive cell type. MWCNT formed agglomerates on top of both cell lines (surface area 15-35 μm2) that were significantly larger and more numerous in PBS than in EtOH and DPL. Whatever the dispersion media, incubation with 100 μg/ml MWCNT induced a similar decrease in metabolic activity without changing cell membrane permeability or apoptosis. Neither MWCNT cellular internalization nor oxidative stress was observed. In contrast, asbestos fibers penetrated into the cells, decreased metabolic activity but not cell membrane permeability, and increased apoptosis, without decreasing cell number. CB was internalized without any adverse effects. In conclusion, this study demonstrates that MWCNT produced for industrial purposes exert adverse effects without being internalized by human epithelial and mesothelial pulmonary cell lines. [Authors]

THE PREVALENCE AND PREDICTION OF PULMONARY FIBROSIS IN AN

This thesis describes an ancillary project to the Early Diagnosis of Mesothelioma and Lung Cancer in Prior Asbestos Workers study and was conducted to determine the effects of asbestos exposure, pulmonary function and cigarette smoking in the prediction of pulmonary fibrosis. 613 workers who were occupationally exposed to asbestos for an average of 25.9 (SD=14.69) years were sampled from Sarnia, Ontario. A structured questionnaire was administered during a face-to-face interview along with a low-dose computed tomography (LDCT) of the thorax. Of them, 65 workers (10.7%, 95%CI 8.12—12.24) had LDCT-detected pulmonary fibrosis. The model predicting fibrosis included the variables age, smoking (dichotomized), post FVC % splines and post- FEV1% splines. This model had a receiver operator characteristic area under the curve of 0.738. The calibration of the model was evaluated with R statistical program and the bootstrap optimism-corrected calibration slope was 0.692. Thus, our model demonstrated moderate predictive performance.

Johns-Manville (Canada) records, 1949-1977 (non-inclusive).

The Johns-Manville Company was founded in 1901with the merging of the H.W. Johns Manufacturing Company and the Manville Covering Company. Both companies made building materials using asbestos. The new company was based in New York, New York, and made products such as insulation and roofing materials, automotive sheet packing for cylinders, asbestos/cement, acoustical and magnesia products. Significant restructuring has occurred over the years as the company shifted from production of asbestos products to other types of building materials, such as fibre glass and forest products. Since 2001, the Johns-Manville Company has been owned by Berkshire Hathaway. The company began operations in Canada in 1918 in Asbestos, Quebec, where the Jeffrey Asbestos Mine was located. A Canadian plant opened in Port Union, Scarborough Township, in 1956, and another in North Bay, Ontario, in 1957. Both of these plants have since closed. The company currently has two plants in Canada, in Innisfail, Alberta, and Cornwall, Ontario.

Analyse bayésienne et élicitation d’opinions d’experts en analyse de risques et particulièrement dans le cas de l’amiante chrysotile

L’appréciation de la puissance cancérogène des fibres d’amiante chrysotile repose en grande partie sur des jugements subjectifs et incertains des experts et des analystes en raison des résultats hétérogènes et équivoques d’études épidémiologiques et toxicologiques sérieuses. L’approche probabiliste bayésienne en évaluation de risques peut formaliser l’impact des jugements subjectifs et de leurs incertitudes sur les estimations de risques, mais elle est encore peu utilisée en santé publique. Le présent travail examine la possibilité d’appliquer l’approche bayésienne dans une récente élicitation d’opinions d’experts pour estimer la toxicité du chrysotile, le degré de consensus et de divergence, ainsi que les niveaux d’incertitude des experts. Les estimations des experts concordaient assez bien sur la différence de toxicité entre chrysotile et amphiboles pour les mésothéliomes. Pour le cancer du poumon, les évaluations probabilistes étaient bien plus disparates. Dans ce cas, les jugements des experts semblaient influencés à différents degrés par des biais heuristiques, surtout les heuristiques d’affect et d’ancrage liés à la controverse du sujet et à l’hétérogénéité des données. Une méthodologie rigoureuse de préparation des experts à l’exercice d’élicitation aurait pu réduire l’impact des biais et des heuristiques sur le panel.

Amiante et conflits d’intérêts : l’Université McGill pointée du doigt

Étude de cas / Case study

Condiciones de trabajo saludables. Análisis de los estudios realizados en Colombia y Europa en el periodo 2002-2012

INTRODUCCIÓN. El presente trabajo explora las condiciones de trabajo saludables más frecuentemente estudiadas en Colombia y Europa en el período 2002 a 2012. OBJETIVO. Este trabajo busca definir los avances en investigación de las condiciones de trabajo saludables que presentaron Colombia y Europa en el período 2002 a 2012, a través de: el análisis del concepto de salud en el trabajo desde diferentes enfoques e investigaciones; el análisis los modelos sobre condiciones saludables en el trabajo; así como la revisión, consolidación y análisis documental alrededor del estado del arte de la investigación sobre los aspectos relacionados con las condiciones psicosociales del trabajo. METODO. Investigación documental, a través de la búsqueda en base de datos y posterior consolidación, sistematización y análisis de la literatura científica que evaluaban aspectos relacionados con las condiciones de trabajo saludable, en Colombia y Europa, durante el período 2002-2012. RESULTADOS. En la revisión documental se encontró que la implementación de ambientes saludables a nivel organizacional es un esfuerzo y compromiso de los empresarios, los trabajadores y la sociedad para mejorar el bienestar de las personas en el trabajo que representa una responsabilidad social empresarial, así como una ventaja competitiva sostenible en el sector económico. De igual manera, se resalta el avance que presenta Europa y España en el desarrollo de estudios nacionales de las condiciones detrabajo saludables frente a Colombia que aún no ha tenido investigaciones de representatividad nacional.

Determinación del perfil de exposición potencial a contaminantes químicos mediante el uso de metodologías de evaluación simplificada en trabajadores de autopartes en el barrio La Paz, Bogotá 2015

Las actividades de mantenimiento automotriz en el sector de autopartes conlleva el uso de agentes químicos bajo diversas circunstancias de exposición, tanto en las condiciones de manipulación de productos químicos como a las características propias de cada actividad de mantenimiento asociado a las tareas específicas del trabajo. Tradicionalmente la evaluación de contaminantes químicos desde la visión de la Higiene Ocupacional incluye la evaluación cuantitativa de la exposición mediante técnicas instrumentales concretas y estandarizadas, determinando el nivel de concentración en aire a la cual un trabajador se ve expuesto y que, en comparación con valores límites permisibles (VLPs), inducen el establecimiento de medidas de control y vigilancia, según el nivel de riesgo caracterizado. Sin embargo es evidente la limitación de la implementación de esta sistemática en particular en micros y pequeñas empresas que carecen de los recursos suficientes para abordar la problemática de forma objetiva. En este contexto diversas metodologías de evaluación cualitativa o subjetiva se han desarrollado por distintas organizaciones en el mundo con el fin de disminuir la brecha entre el establecimiento de medidas de control y la valoración del riesgo, ofreciendo alternativas confiables para la toma de decisiones preventivas sin la necesidad de acudir a mediciones cuantitativas. Mediante la presente investigación se pretende validar la efectividad en el uso de una herramienta de evaluación simplificada del riesgo químico propuesta por el INRS (Institut National de Recherche et de Sécurité Francés) mediante la determinación del perfil de exposición potencial a contaminantes químicos de la población laboral de 36 almacenes de autopartes ubicados en el barrio la Paz de la ciudad de Bogotá, Colombia, divididos según énfasis de actividades en Partes Externas, Partes Eléctricas e Inyección, Partes Mecánicas, Partes Múltiples, a través de un estudio de corte transversal. El estudio permitió Jerarquizar el riesgo potencial, valorar el riesgo vía inhalatoria y dérmica para finalmente construir el perfil de exposición potencial a contaminantes químicos de trabajadores. La información de las variables de análisis fue consolidada en una herramienta informática diseñada para tal fin, la cual facilito la administración de los datos y su respectivo análisis. Con base en los hallazgos fue posible establecer los productos químicos que de acuerdo a las condiciones de trabajo y circunstancias de exposición sugieren medidas específicas para la disminución del riesgo potencial de acuerdo a la calificación global de los agentes, permitiendo deducir la viabilidad de la aplicación de herramientas de valoración cualitativa para la evaluación del riesgo químico como estrategia de prevención primaria.

Exposición laboral de agentes químicos carcinógenos presentes en las empresas afiliadas a una ARL en Colombia 2011-2014

Objetivo: Caracterizar los sectores económicos con mayor susceptibilidad de exposición a agentes químicos carcinógenos, categorizados en el grupo 1 por la Agencia Internacional para la Investigación del Cáncer IARC (formaldehído, polvo de madera, benceno y sílice cristalina) afiliadas a una Administradora de riesgos Laborales (ARL) en Colombia entre el periodo 2011 a 2014. Método: Estudio de tipo descriptivo retrospectivo con datos históricos obtenidos desde 2011 hasta 2014. De acuerdo con el número de mediciones que se realizó en cada área y cargo de las empresas objeto de estudio, se utilizó la medición basal para determinar el estado inicial y evaluar de manera concurrente la exposición de estos cuatro agentes químicos. Resultados: En total se obtuvieron 201 mediciones de higiene industrial para cuatro agentes químicos carcinógenos. Los resultados mostraron que índice de riesgo de la exposición a agentes químicos carcinógenos en diferentes empresas, se encuentra en algunos casos en niveles altos o críticos dado que superar los valores máximos permisibles definidos por la Conferencia Americana de Higienistas Industriales de Gobierno (ACGIH). Conclusión: Los trabajadores de diferentes empresas en Colombia están expuestas a diferentes tipos de concentraciones por agentes químicos cancerígenos. Las concentraciones ambientales obtenidas en el ambiente laboral en algunos casos excedieron las concentraciones máximas permitidas, por lo que se recomienda que las empresas e instituciones del país fortalezcan las medidas de prevención, vigilancia y control para minimizar los riegos a que pueden estar expuestos sus trabajadores.

Evaluation of mechanical, physical and thermal performance of cement-based tiles reinforced with vegetable fibers

The objective of this work was to analyze mechanical, physical and thermal performance of roofing tiles produced with several formulations of cement-based matrices reinforced with sisal and eucalyptus fibers. The physical properties of the tiles were more influenced by the fiber content of the composite than by the type of reinforcement. The type of the fiber was the main variable for the achievement of the best results of mechanical properties. Exposure to tropical climate has caused a severe reduction in the mechanical properties of the composites. After approximately four months of age under external weathering the toughness of the vegetable fiber-cement fell to 53-68% of the initial toughness at 28 days of age. The thermal performance showed that roofing tiles reinforced with vegetable fiber are acceptable as substitutes of asbestos-cement sheets. (c) 2006 Elsevier Ltd. All rights reserved.

Cleanup worker exposures to hazardous chemicals at a former nuclear weapons plant : piloting of an exposure surveillance system

Cleanup of former U.S. Department of Energy (DOE) nuclear weapons production facilities involves potential exposures to various hazardous chemicals. We have collaboratively developed and piloted an exposure database and surveillance system for cleanup worker hazardous chemical exposure data with a cleanup contractor at the Rocky Flats Environmental Technology Site (RFETS). A unique system feature is the incorporation of a 34-category work task-coding scheme. This report presents an overview of the data captured by this system during development and piloting from March 1995 through August 1998. All air samples collected were entered into the system. Of the 859 breathing zone samples collected, 103 unique employees and 39 unique compounds were represented. Breathing zone exposure levels were usually low (86% of breathing zone samples were below analytical limits of detection). The use of respirators and other exposure controls was high (87 and 88%, respectively). Occasional high-level excursions did occur. Detailed quantitative summaries are provided for the six most monitored compounds: asbestos, beryllium, carbon tetrachloride, chromium, lead, and methylene chloride. Task and job title data were successfully collected for most samples, and showed specific cleanup activities by pipe fitters to be the most commonly represented in the database. Importantly, these results demonstrate the feasibility of the implementation of integrated exposure database and surveillance systems by practicing industrial hygienists employed in industry as well as the preventive potential and research uses of such systems. This exposure database and surveillance system--the central features of which are applicable in any industrial work setting--has enabled one of the first systematic quantitative characterizations of DOE cleanup worker exposures to hazardous chemicals.

Integrating workplace exposure databases for occupational medicine services and epidemiologic studies at a former nuclear weapons facility

We outline methods for integrating epidemiologic and industrial hygiene data systems for the purpose of exposure estimation, exposure surveillance, worker notification, and occupational medicine practice. We present examples of these methods from our work at the Rocky Flats Plant?a former nuclear weapons facility that fabricated plutonium triggers for nuclear weapons and is now being decontaminated and decommissioned. The weapons production processes exposed workers to plutonium, gamma photons, neutrons, beryllium, asbestos, and several hazardous chemical agents, including chlorinated hydrocarbons and heavy metals. We developed a job exposure matrix (JEM) for estimating exposures to 10 chemical agents in 20 buildings for 120 different job categories over a production history spanning 34 years. With the JEM, we estimated lifetime chemical exposures for about 12,000 of the 16,000 former production workers. We show how the JEM database is used to estimate cumulative exposures over different time periods for epidemiological studies and to provide notification and determine eligibility for a medical screening program developed for former workers. We designed an industrial hygiene data system for maintaining exposure data for current cleanup workers. We describe how this system can be used for exposure surveillance and linked with the JEM and databases on radiation doses to develop lifetime exposure histories and to determine appropriate medical monitoring tests for current cleanup workers. We also present time-line-based graphical methods for reviewing and correcting exposure estimates and reporting them to individual workers.

Efeito da adição de fibras da palma do licuri (syagrus coronata) no comportamento físico e mecânico de compósitos de matriz cimentícia

This research was motivated by the requirement of asbestos s replacement in building systems and the need to generate jobs and income in the country side of the state of Bahia, Brazil. The project aimed at using fibers from licuri leaves (syagrus coronata), an abundant palm in the region, to produce composites appropriate for the sustainable production of cement fibre reinforced products in small plants. The composites were produced in laboratory using Portland cement CP-II-F32, sand, water, licuri palm fiber contents of 1.0, 1.5 and 2.0% by weight of binder (two different fiber length) and metakaolin. The latter was chosen as an additional binder for its efficiency to reduce the alkalinity of cementitious matrixes therefore preventing the degradation of vegetable fibers. The characterization of the composite components was carried out by sieving and laser particle size analyses, thermal analysis, fluorescence and X-ray diffraction. The composites performance was evaluated by 3- point-bending tests, compressive strength, ultrasound module of elasticity, free and restrained shrinkage, water capillarity absorption and apparent specific gravity. It has been found that the addition of fibers increased the time to onset of cracking over 200.00% and a 25% reduction in cracks opening in the restrained shrinkage test. The capillary absorption reduced about 25% when compared to fiber-free composites. It was also observed with regard to flexural strength, compressive strength and specific gravity, that the addiction of fibers did not affect the composite performance presenting similar results for compounds with and without fibers. In general it can be stated that the reinforced composite fibers of palm licuri presents physical and mechanical characteristics which enable them to be used in the intended proposals of this research

Brachiaria decumbens supresses the initial growth of Coffea arabica

Brachiaria decumbens vem se tornando uma das plantas daninhas mais freqüentes na infestação de cafezais em formação, pois além de sua elevada agressividade e dificuldade de controle, está ocorrendo expansão das áreas cafeeiras para locais anteriormente ocupados por pastagens. Objetivou-se neste trabalho avaliar os efeitos desta planta daninha, em densidades crescentes, sobre o desenvolvimento inicial de mudas de café (Coffea arabica L. cv. Catuaí Amarelo). O experimento foi conduzido em condições semi-controladas, sem limitação de água. Uma muda de café foi transplantada em caixa de amianto com capacidade para 70 L, preenchida com terra coletada da camada arável de um Latossolo Vermelho. Os tratamentos constaram de diferentes densidades de transplante de capim-braquiária, a saber: 0, 4, 8, 12, 16, 20, 24, 36, 48 e 60 plantas m-2. O ensaio foi conduzido por um período experimental de 120 dias após o plantio (DAP). Todas as características analisadas foram afetadas negativamente pela interferência da planta daninha, mas as que se mostraram mais sensíveis a essa interferência foram à área foliar e a biomassa seca das folhas. Houve redução de 41,8% na área foliar do cafeeiro quando conviveu com o capim-braquiária a partir da densidade de 8 plantas m-2, chegando a 68,7% na densidade de 60 plantas m-2. Também a partir da densidade de 8 plantas m-2, a redução na biomassa seca das folhas em relação à testemunha foi de 41,4% e na densidade de 60 plantas m-2 chegou a 72,8%. Brachiaria decumbens, a partir da densidade de 8 plantas m-2, interfere negativamente sobre as mudas de café até os 120 DAP.

Efeito da densidade e da distância de caruru-de-mancha e amendoim-bravo na cultura do feijoeiro

O objetivo deste trabalho foi avaliar a interferência causada pelo caruru-demancha (Amaranthus viridis) e amendoim-bravo (Euphorbia heterophylla), em função das densidades e distâncias, no feijoeiro (Phaseolus vulgaris) cultivar Pérola. Como recipientes, foram utilizadas caixas de cimento-amianto, com capacidade para 50 litros, preenchidas com LatossoloVermelho-Escuro. As mudas foram formadas em bandejas de 128 células preenchidas com substrato hortícola; quando as plântulas atingiram o estádio V2, foram transplantadas para as caixas, sendo as de feijoeiro numa linha central, reproduzindo a semeadura em campo, e as das plantas daninhas nas densidades de 8, 16 e 32 plantas m-2, distanciadas de 0, 12 e 24 cm das plantas de feijão e igualmente entre si. O experimento foi conduzido no delineamento experimental de blocos casualizados, com os tratamentos dispostos em esquema fatorial 3x3+2T, com quatro repetições, constituindo as parcelas experimentais. Foram avaliadas características de crescimento e de produtividade da cultura e das plantas daninhas. Os dados obtidos foram submetidos à análise de variância pelo teste F, e as médias, comparadas pelo teste de Tukey. Observou-se que as plantas daninhas obtiveram maior desenvolvimento quando em maior distância da cultura. O caruru-de-mancha causou reduções no número de vagens e na produtividade estimada do feijoeiro. Para o caruru-de-mancha, o aumento da densidade só causou redução na produtividade da cultura quando as plantas estavam distanciadas em pelo menos 12 cm. A 0 cm, o feijoeiro tornou-se mais competitivo e não sofreu interferência das plantas daninhas, independentemente da densidade destas.