Análisis de la modulación de voz ocasionada por el temblor vocal

La realización de este proyecto está basado en el estudio realizado por Jean Schoentgen en el cual el autor caracterizó el micro temblor vocal por medio del índice y la frecuencia de modulación. En este proyecto se utilizará la herramienta Matlab para el cálculo de estos parámetros y al finalizar se analizarán los datos obtenidos. El proyecto se ha dividido en tres grandes partes. En la primera de ellas se ha explicado brevemente los conceptos básicos de la voz y conceptos importantes tales como el temblor fisiológico, el patológico y el Jitter vocal entre otros, también se han detallado conceptos matemáticos utilizados en el desarrollo del código. Esto se realizó con el fin que el lector tenga claros algunos conceptos importantes antes del desarrollo del código y así pueda entender con más facilidad el estudio realizado en este proyecto, en esta parte no se ha realizado una explicación muy extensa de cada concepto, entendiendo que el lector posee unos conocimientos básicos de ingeniería, por otra parte existen innumerables libros que explican de una manera más precisa cada uno de estos conceptos. En la segunda parte se llevó a cabo el desarrollo del código. Como se mencionó anteriormente se ha utilizado la herramienta Matlab que es muy utilizada en la mayoría de las asignaturas de la carrera obteniendo así un buen dominio de esta, además posee unos toolbox muy útiles que facilitan los cálculos matemáticos. En esta parte se ilustra paso a paso cada etapa de elaboración del código y algunas graficas de la señal de voz a medida que pasa por cada etapa del código. En la última parte se obtienen los datos de todos los cálculos de los registros de voz y se analiza cada uno de ellos a la vez que se comparan con los del estudio de Jean Schoentgen y se analizan las posibles diferencias. ABSTRACT. The Project is based on the search made by Jean Schoentgen, whose research the micro tremor vocal can be established by frequency modulation and modulation index. This project has been carried out in Matlab to calculate the aforementioned parameters and finally, the results were contrasted with the results from Jean Shoetngen’s research. This project consists of three parts: The first of all, to be able to understand this project to future readers .It was explained different basic concepts about the voice such as physiologic tremor, pathological tremor and Jitter. Furthermore, mathematical concepts were explained in detail, due to these were used in the software development. Then, it was focused on software development such as the elaboration of code and different voice signals that were processed. This part was made with Matlab, which is mathematical software with high-level language for numerical computation, visualization, collaborate across disciplines including signal and image processing and application development. At finally, the acquired calculations were contrasted with the results from Jean Schoentgen’s research.

Gestor de sugerencias

El Gestor de Sugerencias que se desarrolla en este proyecto surge como una necesidad para facilitar la gestión de las ideas de los trabajadores de la planta de FICOSA en Soria, dedicada a la fabricación de componentes de automoción. Este proyecto toma forma dentro del departamento de Mejora Continua de la empresa, en la que trabajan 750 personas. Dada la situación del mercado actual, con varios años consecutivos de descenso de ventas de vehículos en los países occidentales los constructores de automóviles reclaman ajustes de precios constantes, que sólo se pueden obtener con optimización de nuestros recursos y mejoras de los procesos aportando ideas innovadoras y de desarrollo. Este es el objetivo principal de la mejora continua, y la aplicación desarrollada es una herramienta más para conseguirlo. Como parte de la estrategia corporativa de mejora continua citada unas líneas más arriba, basada en teorías mundialmente reconocidas como el método KAIZEN, se identificaron las sugerencias de los empleados como una fuente de valor incalculable para la mejora, ya que a través del conocimiento de la mano de obra directa se pueden identificar más fácil y rápidamente los “desperdicios” de un proceso productivo. Dadas las dimensiones de la planta, dividida en cuatro secciones productivas, y el alto volumen de empleados, se planteó el problema de gestionar las sugerencias de una forma dinámica y simple, surgiendo este proyecto como respuesta a la necesidad de facilitar esta gestión. El proyecto se basa en el desarrollo global de una herramienta automática de gestión de sugerencias de mejora proporcionadas por los trabajadores, de uso sencillo, que sea dinámica, que nos permita centralizar las ideas y tener un resumen de los ahorros que estas sugerencias aportan. El proyecto se inicia con la definición de los objetivos concretos de la herramienta, y su desarrollo, hasta la fase de elaboración de manuales de uso, planificación de formación a todos los empleados, implementación, seguimiento y mejora de la misma. ABSTRACT. The Suggestion Management System developed on this Project arises from the needs to make easier the management of the ideas of the employees of Ficosa Soria production plant, facility dedicated to the production of automotive components of first level. This project has been developed inside the Continuous Improvement Department of Ficosa Soria where works 750 employees. Due to the current situation of the automotive market, with several years of sales decrease on Europe, the OEM´s request continuous price adjustments, these requests can be only obtained with the optimization of our resources and the improvement of our processes including innovative and development ideas. This is the main objective of the continuous improvement, and the application development it is another tool more to get the final objective. As a part of the strategy of continuous improvement mentioned a few lines above, based on the world renowned theories as the method KAIZEN, there was identified the employee suggestion as a very profitable source for the continuous improvement, due to the know-how of the direct labor it could be easier identified the “wastes” of our productive process. Considering the plant dimensions, split in four productive sections, and also considering the number of employees, it was raised the problem of how to manage the suggestions in a very simple and dynamic way, creating this project as an answer to the needs of make easier the management. This project is based on the global development of an automatic tool of suggestion management given by our employees, easy to use, dynamic and allow us to centralize the ideas and to have a summary of the savings that the suggestions gave. The project it is originated with the definition of the concrete objectives of the tool and its development, until the phase of creation use manuals, training planification to all employees, implementation, follow and improvement itself.

Sistema computacional com geração de dados e visualização de resultados para estrutura de edifícios

Este trabalho trata do desenvolvimento de um sistema computacional, para a geração de dados e apresentação de resultados, específico para as estruturas de edifícios. As rotinas desenvolvidas devem trabalhar em conjunto com um sistema computacional para análise de estruturas com base no Método dos Elementos Finitos, contemplando tanto as estruturas de pavimentos; com a utilização de elementos de barra, placa/casca e molas; como as estruturas de contraventamento; com a utilização de elementos de barra tridimensional e recursos especiais como nó mestre e trechos rígidos. A linguagem computacional adotada para a elaboração das rotinas mencionadas é o Object Pascal do DELPHI, um ambiente de programação visual estruturado na programação orientada a objetos do Object Pascal. Essa escolha tem como objetivo, conseguir um sistema computacional onde alterações e adições de funções possam ser realizadas com facilidade, sem que todo o conjunto de programas precise ser analisado e modificado. Por fim, o programa deve servir como um verdadeiro ambiente para análise de estruturas de edifícios, controlando através de uma interface amigável com o usuário uma série de outros programas já desenvolvidos em FORTRAN, como por exemplo o dimensionamento de vigas, pilares, etc.

Information systems design for the community health services

This system is concerned with the design and implementation of a community health information system which fulfils some of the local needs of fourteen nursing and para-medical professions in a district health authority, whilst satisfying the statutory requirements of the NHS Korner steering group for those professions. A national survey of community health computer applications, documented in the form of an applications register, shows the need for such a system. A series of general requirements for an informations systems design methodology are identified, together with specific requirements for this problem situation. A number of existing methodologies are reviewed, but none of these were appropriate for this application. Some existing approaches, tools and techniques are used to define a more suitable methodology. It is unreasonable to rely on one single general methodology for all types of application development. There is a need for pragmatism, adaptation and flexibility. In this research, participation in the development stages by those who will eventually use the system was thought desirable. This was achieved by forming a representative design group. Results would seem to show a highly favourable response from users to this participation which contributed to the overall success of the system implemented. A prototype was developed for the chiropody and school nursing staff groups of Darlington health authority, and evaluations show that a significant number of the problems and objectives of those groups have been successfully addressed; the value of community health information has been increased; and information has been successfully fed back to staff and better utilised.

How the web of things challenges requirements engineering

As a subset of the Internet of Things (IoT), the Web of Things (WoT) shares many characteristics with wireless sensor and actuator networks (WSANs) and ubiquitous computing systems (Ubicomp). Yet to a far greater degree than the IoT, WSANs or Ubicomp, the WoT will integrate physical and information objects, necessitating a means to model and reason about a range of context types that have hitherto received little or no attention from the RE community. RE practice is only now developing the means to support WSANs and Ubicomp system development, including faltering first steps in the representation of context. We argue that these techniques will need to be developed further, with a particular focus on rich context types, if RE is to support WoT application development. © 2012 Springer-Verlag.

Semantic wrapping for heterogeneous database management

Query processing is a commonly performed procedure and a vital and integral part of information processing. It is therefore important and necessary for information processing applications to continuously improve the accessibility of data sources as well as the ability to perform queries on those data sources. ^ It is well known that the relational database model and the Structured Query Language (SQL) are currently the most popular tools to implement and query databases. However, a certain level of expertise is needed to use SQL and to access relational databases. This study presents a semantic modeling approach that enables the average user to access and query existing relational databases without the concern of the database's structure or technicalities. This method includes an algorithm to represent relational database schemas in a more semantically rich way. The result of which is a semantic view of the relational database. The user performs queries using an adapted version of SQL, namely Semantic SQL. This method substantially reduces the size and complexity of queries. Additionally, it shortens the database application development cycle and improves maintenance and reliability by reducing the size of application programs. Furthermore, a Semantic Wrapper tool illustrating the semantic wrapping method is presented. ^ I further extend the use of this semantic wrapping method to heterogeneous database management. Relational, object-oriented databases and the Internet data sources are considered to be part of the heterogeneous database environment. Semantic schemas resulting from the algorithm presented in the method were employed to describe the structure of these data sources in a uniform way. Semantic SQL was utilized to query various data sources. As a result, this method provides users with the ability to access and perform queries on heterogeneous database systems in a more innate way. ^

A middleware to support services delivery in a domain-specific virtual machine

The increasing use of model-driven software development has renewed emphasis on using domain-specific models during application development. More specifically, there has been emphasis on using domain-specific modeling languages (DSMLs) to capture user-specified requirements when creating applications. The current approach to realizing these applications is to translate DSML models into source code using several model-to-model and model-to-code transformations. This approach is still dependent on the underlying source code representation and only raises the level of abstraction during development. Experience has shown that developers will many times be required to manually modify the generated source code, which can be error-prone and time consuming. ^ An alternative to the aforementioned approach involves using an interpreted domain-specific modeling language (i-DSML) whose models can be directly executed using a Domain Specific Virtual Machine (DSVM). Direct execution of i-DSML models require a semantically rich platform that reduces the gap between the application models and the underlying services required to realize the application. One layer in this platform is the domain-specific middleware that is responsible for the management and delivery of services in the specific domain. ^ In this dissertation, we investigated the problem of designing the domain-specific middleware of the DSVM to facilitate the bifurcation of the semantics of the domain and the model of execution (MoE) while supporting runtime adaptation and validation. We approached our investigation by seeking solutions to the following sub-problems: (1) How can the domain-specific knowledge (DSK) semantics be separated from the MoE for a given domain? (2) How do we define a generic model of execution (GMoE) of the middleware so that it is adaptable and realizes DSK operations to support delivery of services? (3) How do we validate the realization of DSK operations at runtime? ^ Our research into the domain-specific middleware was done using an i-DSML for the user-centric communication domain, Communication Modeling Language (CML), and for microgrid energy management domain, Microgrid Modeling Language (MGridML). We have successfully developed a methodology to separate the DSK and GMoE of the middleware of a DSVM that supports specialization for a given domain, and is able to perform adaptation and validation at runtime. ^

ArchWiSeN: uma estratégia baseada em modelos para desenvolvimento de aplicações para redes de sensores e atuadores sem fio

Wireless Sensor and Actuator Networks (WSAN) are a key component in Ubiquitous Computing Systems and have many applications in different knowledge domains. Programming for such networks is very hard and requires developers to know the available sensor platforms specificities, increasing the learning curve for developing WSAN applications. In this work, an MDA (Model-Driven Architecture) approach for WSAN applications development called ArchWiSeN is proposed. The goal of such approach is to facilitate the development task by providing: (i) A WSAN domain-specific language, (ii) a methodology for WSAN application development; and (iii) an MDA infrastructure composed of several software artifacts (PIM, PSMs and transformations). ArchWiSeN allows the direct contribution of domain experts in the WSAN application development without the need of specialized knowledge on WSAN platforms and, at the same time, allows network experts to manage the application requirements without the need for specific knowledge of the application domain. Furthermore, this approach also aims to enable developers to express and validate functional and non-functional requirements of the application, incorporate services offered by WSAN middleware platforms and promote reuse of the developed software artifacts. In this sense, this Thesis proposes an approach that includes all WSAN development stages for current and emerging scenarios through the proposed MDA infrastructure. An evaluation of the proposal was performed by: (i) a proof of concept encompassing three different scenarios performed with the usage of the MDA infrastructure to describe the WSAN development process using the application engineering process, (ii) a controlled experiment to assess the use of the proposed approach compared to traditional method of WSAN application development, (iii) the analysis of ArchWiSeN support of middleware services to ensure that WSAN applications using such services can achieve their requirements ; and (iv) systematic analysis of ArchWiSeN in terms of desired characteristics for MDA tool when compared with other existing MDA tools for WSAN.

React vs Angular : Slaget om användarupplevelsen

Lately, various programming frameworks has been developed for developing web applications. These frameworks focus on increasing the user experience by performance improvements such as faster render times and response times. One of these frameworks are React, which has introduced a completely new architectural pattern for both managing the state and data flow of an application. React also offers support for native application development and makes server-side rendering possible. Something that is difficult to accomplish with an application developed with Angular 1.5, which is used by the company Dewire today. The aim of this thesis was to compare React with an existing Angular project, in order to determine whether React could be a potential replacement for Angular. To gain knowledge about the subject, a theoretical study of web- based sources has been made. While the practical part has been to rebuild a web application with React together with the architecture Flux, which is based on a view from the Angular project. The implementation process was repeated until the view was completed and a desired data flow, as in the Angular application, was reached. The resulting React application was later compared with the Angular application developed by the company, where the outcome of the comparison showed that the React performed better than Angular in all tests. In conclusion, due to the timeframe of the project, only the most important parts of the Angular project were implemented in order to carry out the measurements that were of interest to the company. By recreating most of the functionality, or the entire Angular application, more interesting comparisons could have been done.

Street lighting mesh network protocol

The digital revolution of the 21st century contributed to stem the Internet of Things (IoT). Trillions of embedded devices using the Internet Protocol (IP), also called smart objects, will be an integral part of the Internet. In order to support such an extremely large address space, a new Internet Protocol, called Internet Protocol Version 6 (IPv6) is being adopted. The IPv6 over Low Power Wireless Personal Area Networks (6LoWPAN) has accelerated the integration of WSNs into the Internet. At the same time, the Constrained Application Protocol (CoAP) has made it possible to provide resource constrained devices with RESTful Web services functionalities. This work builds upon previous experience in street lighting networks, for which a proprietary protocol, devised by the Lighting Living Lab, was implemented and used for several years. The proprietary protocol runs on a broad range of lighting control boards. In order to support heterogeneous applications with more demanding communication requirements and to improve the application development process, it was decided to port the Contiki OS to the four channel LED driver (4LD) board from Globaltronic. This thesis describes the work done to adapt the Contiki OS to support the Microchip TM PIC24FJ128GA308 microprocessor and presents an IP based solution to integrate sensors and actuators in smart lighting applications. Besides detailing the system’s architecture and implementation, this thesis presents multiple results showing that the performance of CoAP based resource retrievals in constrained nodes is adequate for supporting networking services in street lighting networks.

Online MBPeT dashboard : enabling performance testing as a service in the cloud

In this thesis, tool support is addressed for the combined disciplines of Model-based testing and performance testing. Model-based testing (MBT) utilizes abstract behavioral models to automate test generation, thus decreasing time and cost of test creation. MBT is a functional testing technique, thereby focusing on output, behavior, and functionality. Performance testing, however, is non-functional and is concerned with responsiveness and stability under various load conditions. MBPeT (Model-Based Performance evaluation Tool) is one such tool which utilizes probabilistic models, representing dynamic real-world user behavior patterns, to generate synthetic workload against a System Under Test and in turn carry out performance analysis based on key performance indicators (KPI). Developed at Åbo Akademi University, the MBPeT tool is currently comprised of a downloadable command-line based tool as well as a graphical user interface. The goal of this thesis project is two-fold: 1) to extend the existing MBPeT tool by deploying it as a web-based application, thereby removing the requirement of local installation, and 2) to design a user interface for this web application which will add new user interaction paradigms to the existing feature set of the tool. All phases of the MBPeT process will be realized via this single web deployment location including probabilistic model creation, test configurations, test session execution against a SUT with real-time monitoring of user configurable metric, and final test report generation and display. This web application (MBPeT Dashboard) is implemented with the Java programming language on top of the Vaadin framework for rich internet application development. The Vaadin framework handles the complicated web communications processes and front-end technologies, freeing developers to implement the business logic as well as the user interface in pure Java. A number of experiments are run in a case study environment to validate the functionality of the newly developed Dashboard application as well as the scalability of the solution implemented in handling multiple concurrent users. The results support a successful solution with regards to the functional and performance criteria defined, while improvements and optimizations are suggested to increase both of these factors.

Desenvolvimento de plataforma digital para análise da satisfação dos utentes de unidades de saúde

Este documento descreve o trabalho realizado em conjunto com a empresa MedSUPPORT[1] no desenvolvimento de uma plataforma digital para análise da satisfação dos utentes de unidades de saúde. Atualmente a avaliação de satisfação junto dos seus clientes é um procedimento importante e que deve ser utilizado pelas empresas como mais uma ferramenta de avaliação dos seus produtos ou serviços. Para as unidades de saúde a avaliação da satisfação do utente é atualmente considerada como um objetivo fundamental dos serviços de saúde e tem vindo a ocupar um lugar progressivamente mais importante na avaliação da qualidade dos mesmos. Neste âmbito idealizou-se desenvolver uma plataforma digital para análise da satisfação dos utentes de unidades de saúde. O estudo inicial sobre o conceito da satisfação de consumidores e utentes permitiu consolidar os conceitos associados à temática em estudo. Conhecer as oito dimensões que, de acordo com os investigadores englobam a satisfação do utente é um dos pontos relevantes do estudo inicial. Para avaliar junto do utente a sua satisfação é necessário questiona-lo diretamente. Para efeito desenvolveu-se um inquérito de satisfação estudando cuidadosamente cada um dos elementos que deste fazem parte. No desenvolvimento do inquérito de satisfação foram seguidas as seguintes etapas: Planeamento do questionário, partindo das oito dimensões da satisfação do utente até às métricas que serão avaliadas junto do utente; Análise dos dados a recolher, definindo-se, para cada métrica, se os dados serão nominais, ordinais ou provenientes de escalas balanceadas; Por último a formulação das perguntas do inquérito de satisfação foi alvo de estudo cuidado para garantir que o utente percecione da melhor forma o objetivo da questão. A definição das especificações da plataforma e do questionário passou por diferentes estudos, entre eles uma análise de benchmarking[2], que permitiram definir que o inquérito iv estará localizado numa zona acessível da unidade de saúde, será respondido com recurso a um ecrã táctil (tablet) e que estará alojado na web. As aplicações web desenvolvidas atualmente apresentam um design apelativo e intuitivo. Foi fundamental levar a cabo um estudo do design da aplicação web, como garantia que as cores utilizadas, o tipo de letra, e o local onde a informação são os mais adequados. Para desenvolver a aplicação web foi utilizada a linguagem de programação Ruby, com recurso à framework Ruby on Rails. Para a implementação da aplicação foram estudadas as diferentes tecnologias disponíveis, com enfoque no estudo do sistema de gestão de base de dados a utilizar. O desenvolvimento da aplicação web teve também como objetivo melhorar a gestão da informação gerada pelas respostas ao inquérito de satisfação. O colaborador da MedSUPPORT é o responsável pela gestão da informação pelo que as suas necessidades foram atendidas. Um menu para a gestão da informação é disponibilizado ao administrador da aplicação, colaborador MedSUPPORT. O menu de gestão da informação permitirá uma análise simplificada do estado atual com recurso a um painel do tipo dashboard e, a fim de melhorar a análise interna dos dados terá uma função de exportação dos dados para folha de cálculo. Para validação do estudo efetuado foram realizados os testes de funcionamento à plataforma, tanto à sua funcionalidade como à sua utilização em contexto real pelos utentes inquiridos nas unidades de saúde. Os testes em contexto real objetivaram validar o conceito junto dos utentes inquiridos.

Sistema colaborativo para monitoramento remoto de equipamentos biomédicos para a videolaparoscopia através do framework web-engineering e o padrão MVC sistema vera-3C

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Mecânica, 2015.

A Distributed Support based on Kubeflow to Ease MLOps of Federated Learning Algorithms

The main objective of my thesis work is to exploit the Google native and open-source platform Kubeflow, specifically using Kubeflow pipelines, to execute a Federated Learning scalable ML process in a 5G-like and simplified test architecture hosting a Kubernetes cluster and apply the largely adopted FedAVG algorithm and FedProx its optimization empowered by the ML platform ‘s abilities to ease the development and production cycle of this specific FL process. FL algorithms are more are and more promising and adopted both in Cloud application development and 5G communication enhancement through data coming from the monitoring of the underlying telco infrastructure and execution of training and data aggregation at edge nodes to optimize the global model of the algorithm ( that could be used for example for resource provisioning to reach an agreed QoS for the underlying network slice) and after a study and a research over the available papers and scientific articles related to FL with the help of the CTTC that suggests me to study and use Kubeflow to bear the algorithm we found out that this approach for the whole FL cycle deployment was not documented and may be interesting to investigate more in depth. This study may lead to prove the efficiency of the Kubeflow platform itself for this need of development of new FL algorithms that will support new Applications and especially test the FedAVG algorithm performances in a simulated client to cloud communication using a MNIST dataset for FL as benchmark.

On the solubility of proteins as a function of pH: Mathematical development and application

Thermodynamic relations between the solubility of a protein and the solution pH are presented in this work. The hypotheses behind the development are that the protein chemical potential in liquid phase can be described by Henry`s law and that the solid-liquid equilibrium is established only between neutral molecules. The mathematical development results in an analytical expression of the solubility curve, as a function of the ionization equilibrium constants, the pH and the solubility at the isoelectric point. It is shown that the same equation can be obtained either by directly calculating the fraction of neutral protein molecules or by integrating the curve of the protein average charge. The methodology was successfully applied to the description of the solubility of porcine insulin as a function of pH at three different temperatures and of bovine beta-lactoglobulin at four different ionic strengths. (C) 2011 Elsevier B.V. All rights reserved.