Spatial filter based 3D resolution improvement and polarization properties of multiphoton multiple-excitation-spot-optical microscopy

Three-dimensional (3D) resolution improvement in multi-photon multiple-excitation-spot-optical microscopy is proposed. Specially designed spatial filter is employed for improving the overall 3D resolution of the imaging system. An improvement up to a factor of 14.5 and sub-femto liter volume excitation is achieved. The system shows substantial sidelobe reduction (<4%) due to the non-linear intensity dependence of multiphoton process. Polarization effect on x-oriented and freely rotating dipoles shows dramatic change in the field distribution at the focal-plane. The resulting point-spread function has the ability to produce several strongly localized polarization dependent field patterns which may find applications in optical engineering and bioimaging.

High resolution multiple excitation spot optical microscopy

We propose fundamental improvements in three-dimensional (3D) resolution of multiple excitation spot optical microscopy. The excitation point spread function (PSF) is generated by two interfering counter-propagating depth-of-focus beams along the optical axis. Detection PSF is obtained by coherently interfering the emitted fluorescent light (collected by both the objectives) at the detector. System PSF shows upto 14-fold reduction in focal volume as compared to confocal, and almost 2-fold improvement in lateral resolution. Proposed PSF has the ability to simultaneously excite multiple 3D-spots of sub-femtoliter volume. Potential applications are in fluorescence microscopy and nanobioimaging. Copyright 2011 Author(s). This article is distributed under a Creative Commons Attribution 3.0 Unported License. [doi:10.1063/1.3598413]

Failure modes and fatigue behavior of conventional and refilled friction stir spot welds in AA 6061-T6 sheets

The fatigue behavior of conventional friction stir spot welding (FSSW) and friction stir spot welding refilled by the friction forming process (FSSW-FFP) in aluminum 6061-T6 lap shear specimens, are investigated based on the experimental observations. Optical micrographs of the welds after fatigue failure in both the cases are examined to study the fatigue crack propagation and failure modes. Experimental results indicate that the fatigue strength of the FSSW-FFP weld samples is higher than that of the conventional FSSW samples at all loads. Fracture surfaces are analyzed in detail using the scanning electron microscope. (C) 2013 Elsevier Ltd. All rights reserved.

Static shear strength and fatigue life of refill friction stir spot welded AA 6061-T6 sheets

This study was aimed at evaluating the static shear strength and fatigue properties of the newly developed refilled friction stir spot welded AA 6061-T6 joints. The keyhole, the process disadvantage of conventional friction stir spot welding, was refilled successfully, using an additional filler plate, with specially designed tools. Two different tool profiles, namely, convex and concave, were used for the refilling process. Sound and defect free joints were obtained by the refilling process. Joints refilled with convex tools showed better static shear strength than those with the concave ones. The variation of microhardness in different regions of the weld was analysed. Fatigue tests were conducted on the lap shear specimens at a stress ratio of R=0.1. The optical micrographs of the welds after fatigue failure in both the conventional and refilled processes were examined to study the fatigue crack propagation and failure modes.

Investigation on Depth of Heat Affected Zone of Discharge Spot by High Repetitive Rate YAG Laser-Induced Discharge Texturing

It is known that the press formability and the elongation of laser textured sheet are improved, and the service life of textured roll is longer than that of the un-textured roll due to hardening of the treated surface. One of the goals to develop high repetitive rate YAG laser-induced discharge texturing (LIDT) is to get deeper hardening zone. By observing and measuring cross-section of LIDT spots in different discharge conditions, it is found that the single-crater, which is formed by the discharge conditions of anode, which is covered by an oil film and with rectangular current waveform, has the most depth of heat affected zone (HAZ) comparing with other crater shapes when discharge energy is the same. The depth of HAZ is mainly depends on pulse duration when the discharge spot is single-crater. The results are analyzed.

Control biológico de tizón temprano (Alternaria solani) en tomate con bacterias epifitas

En el presente trabajo se estudió el control biológico del Tizón Temprano, causado por Alternaria solani en el cultivo de Tomate. Dicho estudio consistió en dos fases: Fase de in vitro, en la cual se determinaron las características bioquímicas y el comportamiento antagonista de las bacterias aisladas del filoplano de la hoja de tomate contra Alternaria solani . En la fase de invernadero in vivo, se estudió el comportamiento de las bacterias escogidas por su conducta antagonista in vitro y no antagonistas en el cultivo de tomate con dos Variedades Dina y Hayslib, tomando dos momentos de aplicación: a) simultáneamente hongo y bacteria, b) aplicación de las bacterias 24 horas antes de la inoculación artificial del hongo. Para el estudio in vitre se tomaron 50 cepas bacteriales, de las cuales cuatro se comportaron antagonistas y 46 no antagonistas; las cuatro cepas antagonistas inhibieron el crecimiento del patógeno. En relación a las 46 cepas se tomó una al azar para la prueba in vivo y las restantes se apartaron. De las 50 cepas, el 30% resultó con Pseudomonas• fluorescentes (15 cepas bacteriales) y el 70% no fluorescentes (35 cepas bacteriales). Para la prueba in vivo en el cultivo de tomate, se utilizaron las cuatro cepas antagonistas y la cepa bacterial no antagonista escogida al azar. En el cultivo de tomate disminuyó la incidencia de la enfermedad en las cuatro cepas bacteriales antagonistas y a la vez observamos disminución en la incidencia de la enfermedad en la cepa de característica no antagonistas.

Evaluación de pollitas Hy-Line variedad Brown, en etapa de inicio a rompimiento de postura, bajo manejo tradicional

Se evaluó el comportamiento productivo de pollitas Hy- Line var. Brown, durante las primeras diecisiete semanas de desarrollo con la guía de manejo comercial para estas aves. Se utilizó un lote de 4,591 aves distribuidas en dos galeras. Se muestreó el 4% de la población de forma aleatoria y sin reemplazo, registrando peso, alimento consumido y mortalidad. Se realizaron los cálculos de consumo, uniformidad de peso, mortalidad de lote y se registraron las prácticas sanitarias de la granja. El consumo total obtenido fue un 15.6% inferior al reportado por la guía de manejo (803 g), viéndose afectado por cambios en el manejo del alimento, el que fue suministrado de acuerdo al peso vivo y no a la edad de las aves. El peso de las aves resultó 9.3% inferior al estipulado por la guía de manejo. La uniformidad del lote fue del 80% con una variación de ±10% igual al esperado para este tipo de aves. La mortalidad de la granja fue inferior al 0.04% expresado por la guía de manejo comercial. La aplicación del plan sanitario sufrió alteración en el tiempo de ejecución, sin embargo no tuvo efecto sobre la mortalidad de la granja. El manejo zootécnico de la granja está dentro de lo esperado en granjas de pequeños productores avícolas en condiciones tropicales.

Stainless steel sandwich

The Cambridge University's Gordon Laboratory, in collaboration with Fibertech and the Defence Science and Technology Laboratory in the UK, has developed a novel melt spun fiber bore called 'Fibrecore', fabricated entirely from stainless steel with thin faceplates. Fibrecore is typically manufactured by 5mm-long and 70μm thick stainless steel fibers, produced by a melt overflow process. Its entirely metallic construction allows spot welding and tungsten inert gas welding without difficulty. Fibrecore exhibits different energy absorption mechanisms such as core cushioning, core-faceplate delamination, and plastic faceplate deformation, often in a concertina-like fashion. Its low-cost, high structural efficiency and good energy absorption characteristics make it attractive for a range of commercial and military applications. Such applications being evaluated include vehicle body panels, exhaust system noise reduction, low cost filters, and lightweight physical protection. In addition to these characteristics, Fibrecore exhibits properties such as corrosion protection, vibrational damping, and thermal insulation, which also extend its applications.

Development of kelp rockfish, Sebastes atrovirens (Jordan and Gilbert 1880), and brown rockfish, S. auriculatus (Girard 1854), from birth to pelagic juvenile stage, with notes on early larval development of black-and-yellow rockfish, S. chrysomelas (Jordan and Gilbert 1880), reared in the laboratory (Pisces: Sebastidae).

Larval kelp (Sebastes atrovirens), brown (S. auriculatus), and blackand-yellow (S. chrysomelas) rockfish were reared from known adults, to preflexion stage, nine days after birth for S. chrysomelas, to late postflexion stage for S. atrovirens, and to pelagic juvenile stage for S. auriculatus. Larval S. atrovirens and S. chrysomelas were about 4.6 mm body length (BL) and S. auriculatus about 5.2 mm BL at birth. Both S. atrovirens and S. auriculatus underwent notochord flexion at about 6–9 mm BL. Sebastes atrovirens transform to the pelagic juvenile stage at about 14–16 mm BL and S. auriculatus transformed at ca. 25 mm BL. Early larvae of all three species were characterized by melanistic pigment dorsally on the head, on the gut, on most of the ventral margin of the tail, and in a long series on the dorsal margin of the tail. Larval S. atrovirens and S. auriculatus developed a posterior bar on the tail during the flexion or postflexion stage. In S. atrovirens xanthic pigment resembled the melanistic pattern throughout larval development. Larval S. auriculatus lacked xanthophores except on the head until late preflexion stage, when a pattern much like the melanophore pattern gradually developed. Larval S. chrysomelas had extensive xanthic pigmentation dorsally, but none ventrally, in preflexion stage. All members of the Sebastes subgenus Pteropodus (S. atrovirens, S. auriculatus, S. carnatus, S. caurinus, S. chrysomelas, S. dalli, S. maliger, S. nebulosus, S. rastrelliger) are morphologically similar and all share the basic melanistic pigment pattern described here. Although the three species reared in this study can be distinguished on the basis of xanthic pigmentation, it seems unlikely that it will be possible to reliably identify field-collected larvae to species using traditional morphological and melanistic pigmentation characters. (PDF file contains 36 pages.)