Effect of physiological and experiential state of Bactrocera tryoni flies on intra-tree foraging behavior for food (bacteria) and host fruit

Using caged guava trees in Queensland, Australia, provided with food and oviposition sites, the foraging behaviour of females of the tephritid Bactrocera tryoni was investigated in relation to hunger for protein, the presence or absence of bacteria as a source of protein, the degree of prior experience with host fruit and quality of host fruit for oviposition. One aim was to evaluate whether it is immature or mature B. tryoni females that are responsible for initially inoculating host fruit surfaces with "fruit-fly-type" bacteria, the odour of which is known to attract B. tryoni females. Three-week-old immature females provided with sucrose but deprived of protein from eclosion had a much greater propensity than 3-week-old protein-fed mature females to visit vials containing fruit-fly-type bacteria, irrespective of whether vials were associated with adjacent host fruit or not. In the absence of associated bacteria in vials, immature females had a much lower propensity than mature females to visit host fruit. In the presence of bacteria in vials, however, propensity of immature and mature females to visit fruit was about equal. Mature (but not immature) females were more inclined to visit fruit that ranked higher for oviposition (nectarines) than fruit that ranked lower (sweet oranges). Mature females that attempted oviposition during a single 3-min exposure period to a nectarine prior to release were much more likely to find a nectarine than were mature females naive to fruit or immature females with or without prior contact with fruit. Exposure to a nectarine before release did not affect the propensity of either mature or immature females to alight on an odourless visual model of a nectarine, however. As judged by numbers of leaves visited, protein-deprived immature females were more active than protein-fed mature females, irrespective of the sorts of resources on a tree. It was concluded that: the 1st B. tryoni females to arrive on the fruit of a host tree and therefore inoculate the fruit with fruit-fly-type bacteria were unlikely to be sexually immature, but to be mature as a result of having earlier acquired protein elsewhere; the odour of colonies of fruit-fly-type bacteria when associated with host fruit attracted protein-hungry but not protein-fed females; and the odour of the fruit itself attracted mature females (especially experienced ones) but not immature females.

Effect of Packaging Materials and Storage on Major Volatile Compounds in Three Australian Native Herbs

Lemon myrtle, anise myrtle, and Tasmanian pepper leaf are commercial Australian native herbs with a high volatile or essential oil content. Packaging of the herbs in high- or low-density polyethylene (HDPE and LDPE) has proven to be ineffective in preventing a significant loss of volatile components on storage. This study investigates and compares the effectiveness of alternate high-barrier property packaging materials, namely, polyvinylidene chloride coated polyethylene terephthalate/casted polypropylene (PVDC coated PET/CPP) and polyethylene terephthalate/polyethylene terephthalate/aluminum foil/linear low-density polyethylene (PET/PET/Foil/LLDPE), in prevention of volatile compound loss from the three native herbs stored at ambient temperature for 6 months. Concentrations of major volatiles were monitored using gas chromatography?mass spectrometry (GC-MS) techniques. After 6 months of storage, the greatest loss of volatiles from lemon myrtle was observed in traditional LDPE packaging (87% loss) followed by storage in PVDC coated PET/CPP (58% loss) and PET/PET/Foil/LLDPE (loss of 23%). The volatile loss from anise myrtle and Tasmanian pepper leaf stored in PVDC coated PET/CPP and PET/PET/Foil/LLDPE packaging was <30%. This study clearly indicates the importance of selecting the correct packaging material to retain the quality of herbs with high volatile content.

Modified Atmosphere Packaging (MAP) for Control of Black Spot Formation in Chilled Prawns

The marketing of organically labeled prawns is predominately in a cooked or raw frozen form to avoid the development of melanosis (black spot). Certification for organic status prohibits the use of any added chemicals. The application of 60% CO2/40%N2 modified atmosphere to chilled (raw) prawns using two species of prawn was investigated for the ability to control black spot formation. Sensory assessment and microbiological counts were used to determine the end of product shelf life. Modified atmosphere packaged (MAP) prawns exhibited no melanosis for up to 16 days. The high quality life was retained for 12 days; shelf life of 16 days, according to standard microbiological criteria, was achieved, which is more than twice previously reported for non-MAP prawns. Results suggest MAP may be an effective method for the marketing of organically grown prawns as well as those produced by conventional prawn aquaculture without application of the normal chemicals used to prevent black spot. Copyright © 2014 Crown Copyright.

Changes in quality and bioactivity of native food during storage

Australian native foods have long been consumed by the Indigenous people of Australia. There is growing interest in the application of these foods in the functional food and complementary health care industries. Recent studies have provided information on the health properties of native foods but systematic study of changes in flavour and health components during processing and storage has not been done. It is well known that processing technologies such as packaging, drying and freezing can significantly alter the levels of health and flavour compounds. However, losses in compounds responsible for quality and bioactivity can be minimised by improving production practices. This report outlines research developed to provide the native food industry with reliable information on the retention of bioactive compounds during processing and storage to enable the development of product standards which in turn will provide the industry with scientific evidence to expand and explore new market opportunities globally.

Evaluation of packaging films to extend storage life of indigenous Australian vegetables and herbs

A study undertaken in Hervey Bay, Queensland, investigated the potential of creating an indigenous agribusiness opportunity based on the cultivation of indigenous Australian vegetables and herbs. Included were warrigal greens (WG) (Tetragonia tetragonioides), a green leafy vegetable and the herb sea celery (SC) (Apium prostratum); both traditional foods of the indigenous population and highly desirable to chefs wishing to add a unique, indigenous flavour to modern dishes. Packaging is important for shelf life extension and minimisation of postharvest losses in horticultural products. The ability of two packaging films to extend WG and SC shelf life was investigated. These were Antimisted Biaxial Oriented Polypropylene packaging film (BOPP) without perforations and Antifog BOPP Film with microperforations. Weight loss, packaging headspace composition, colour changes, sensory differences and microbial loads of packed WG and SC leaves were monitored to determine the impact of film oxygen transmission rate (OTR) and film water vapour transmission (WVT) on stored product quality. WG and SC were harvested, sanitised, packed and stored at 4°C for 16 days. Results indicated that the OTR and WVT rates of the package film significantly (PKLEINERDAN0.05) influenced the package headspace and weight loss, but did not affect product colour, total bacteria, yeast and mould populations during storage. There was no significant difference (PGROTERDAN0.05) in aroma, appearance, texture and flavour for WG and SC during storage. It was therefore concluded that a shelf life of 16 days at 4°C, where acceptable sensory properties were retained, was achievable for WG and SC in both packaging films.

Regulating Food Consumption : Studies of change and variation in Europe

The role of people as buyers and eaters of food has changed significantly. From being protected by a paternalistic welfare state, people appear to be accorded more freedom and responsibility as individuals, where attention is redirected from the state towards market relations. Many have asserted that these changes are accompanied by fragmentation, individualisation, and privatisation, leading to individual uncertainty and lack of confidence. But empirical observations do not always confirm this, distrust is not necessarily growing and while responsibilities may change, the state still plays an active role. This dissertation explores changing relationships between states and markets, on the one hand, and ordinary people in their capacities as consumers and citizens, on the other. Do we see the emergence of new forms of regulation of food consumption? If so, what is the scope and what are the characteristics? Theories of regulation addressing questions about individualisation and self-governance are combined with a conceptualisation of consumption as processes of institutionalisation, involving daily routines, the division of labour between production and consumption, and the institutional field in which consumption is embedded. The analyses focus on the involvement of the state, food producers and scientific, first of all nutritional, expertise in regulating consumption, and on popular responses. Two periods come out as important, first when the ideas of “designing the good life” emerged, giving the state a very particular role in regulating food consumption, and, second, when this “designing” is replaced by ideas of choice and individual responsibility. One might say that “consumer choice” has become a mode of regulation. I use mainly historical studies from Norway to analyse the shifting role of the state in regulating food consumption, complemented with population surveys from six European countries to study how modernisation processes are associated with trust. The studies find that changing regulation is not only a question of societal or state vs individual responsibilities. Degrees of organisation and formalisation are important as well. While increasing organisation may represent discipline and abuses of power (including exploitation of consumer loyalty), organisation can also, to the consumer, provide higher predictability, systems to deal with malfeasance, and efficiency which may provide conditions for acting. The welfare state and the neo-liberal state have very different types of solutions. The welfare state solution is based on (national) egalitarianism, paternalism and discipline (of the market as well as households). Such solutions are still prominent in Norway. Individualisation and self-regulation may represent a regulatory response not only to a declining legitimacy of this kind of interventionism, but also increasing organisational complexity. This is reflected in large-scale re-regulation of markets as well as in relationships with households and consumers. Individualisation of responsibility is to the consumer not a matter of the number of choices that are presented on the shelves, but how choice as a form of consumer based involvement is institutionalised. It is recognition of people as “end-consumers”, as social actors, with systems of empowerment politically as well as via the provisioning system. ‘Consumer choice’ as a regulatory strategy includes not only communicative efforts to make people into “choosing consumers”, but also the provision of institutions which recognise consumer interests and agency. When this is lacking we find distrust as representing powerlessness. Individual responsibility-taking represents agency and is not always a matter of loyal support to shared goals, but involves protest and creativity. More informal (‘communitarian’) innovations may be an indication of that, where self-realisation is intimately combined with responsibility for social problems. But as solutions to counteract existing imbalances of power in the food market the impacts of such initiatives are probably more as part of consumer mobilisation and politicisation than as alternative provisioning.

The Effect of Food-Related Lifestyle on the Choices of Consumers of Five Food Products

The purpose of this study was to find out whether food-related lifestyle guides and explains product evaluations, specifically, consumer perceptions and choice evaluations of five different food product categories: lettuce, mincemeat, savoury sauce, goat cheese, and pudding. The opinions of consumers who shop in neighbourhood stores were considered most valuable. This study applies means-end chain (MEC) theory, according to which products are seen as means by which consumers attain meaningful goals. The food-related lifestyle (FRL) instrument was created to study lifestyles that reflect these goals. Further, this research has adopted the view that the FRL functions as a script which guides consumer behaviour. Two research methods were used in this study. The first was the laddering interview, the primary aim of which was to gather information for formulating the questionnaire of the main study. The survey consisted of two separate questionnaires. The first was the FRL questionnaire modified for this study. The aim of the other questionnaire was to determine the choice criteria for buying five different categories of food products. Before these analyses could be made, several data modifications were made following MEC analysis procedures. Beside forming FRL dimensions by counting sum-scores from the FRL statements, factor analysis was run in order to elicit latent factors underlying the dimensions. The lifestyle factors found were adventurous, conscientious, enthusiastic, snacking, moderate, and uninvolved lifestyles. The association analyses were done separately for each choice of product as well as for each attribute-consequence linkage with a non-parametric Mann-Whitney U test. The testing variables were FRL dimensions and the FRL lifestyle factors. In addition, the relation between the attribute-consequence linkages and the demographic variables were analysed. Results from this study showed that the choice of product is sequential, so that consumers first categorize products into groups based on specific criteria like health or convenience. It was attested that the food-related lifestyles function as a script in food choice and that the FRL instrument can be used to predict consumer buying behaviour. Certain lifestyles were associated with the choice of each product category. The actual product choice within a product category then appeared to be a different matter. In addition, this study proposes a modification to the FRL instrument. The positive towards advertising FRL dimension was modified to examine many kinds of information search including the internet, TV, magazines, and other people. This new dimension, which was designated as being open to additional information, proved to be very robust and reliable in finding differences in consumer choice behaviour. Active additional information search was linked to adventurous and snacking food-related lifestyles. The results of this study support the previous knowledge that consumers expect to get many benefits simultaneously when they buy food products. This study brought detailed information about the benefits sought, the combination of benefits differing between products and between respondents. Household economy, pleasure and quality were emphasized with the choice of lettuce. Quality was the most significant benefit in choosing mincemeat, but health related benefits were often evaluated as well. The dominant benefits linked to savoury sauce were household economic benefits, expected pleasurable experiences, and a lift in self-respect. The choice of goat cheese appeared not to be an economic decision, self-respect, pleasure, and quality being included in the choice criteria. In choosing pudding, the respondents considered the well-being of family members, and indulged their family members or themselves.

Biophysics of V(D)J recombination and Genome Packaging: In singulo studies on RAG, HMGB1, and TFAM

The recombination-activating gene products, RAG1 and RAG2, initiate V(D)J recombination during lymphocyte development by cleaving DNA adjacent to conserved recombination signal sequences (RSSs). The reaction involves DNA binding, synapsis, and cleavage at two RSSs located on the same DNA molecule and results in the assembly of antigen receptor genes. Since their discovery full-length, RAG1 and RAG2 have been difficult to purify, and core derivatives are shown to be most active when purified from adherent 293-T cells. However, the protein yield from adherent 293-T cells is limited. Here we develop a human suspension cell purification and change the expression vector to boost RAG production 6-fold. We use these purified RAG proteins to investigate V(D)J recombination on a mechanistic single molecule level. As a result, we are able to measure the binding statistics (dwell times and binding energies) of the initial RAG binding events with or without its co-factor high mobility group box protein 1 (HMGB1), and to characterize synapse formation at the single-molecule level yielding insights into the distribution of dwell times in the paired complex and the propensity for cleavage upon forming the synapse. We then go on to investigate HMGB1 further by measuring it compact single DNA molecules. We observed concentration dependent DNA compaction, differential DNA compaction depending on the divalent cation type, and found that at a particular HMGB1 concentration the percentage of DNA compacted is conserved across DNA lengths. Lastly, we investigate another HMGB protein called TFAM, which is essential for packaging the mitochondrial genome. We present crystal structures of TFAM bound to the heavy strand promoter 1 (HSP1) and to nonspecific DNA. We show TFAM dimerization is dispensable for DNA bending and transcriptional activation, but is required for mtDNA compaction. We propose that TFAM dimerization enhances mtDNA compaction by promoting looping of mtDNA.

The food habits of four kelp-bed rockfishes (Scorpaenidae, Sebastes) off Santa Barbara, California

The diets of four common rockfishes from the kelp beds near Santa Barbara, California, were determined by gut contents analysis, and related to feeding strategies. The guts of one hundred specimens of each species were examined, and the importance of prey evaluated by their frequency of occurrence, numbers, and volumes. The volumes of stomach contents were standardized for the size of specimen. Estimates of overlap in diet between the species were made. Sebastes atrovirens fed primarily on small animals from the kelp canopy, and may have employed a browsing rather than pursuing strategy of feeding. It showed low overlap in diet with the three bottom-dwelling species, S. carnatus, S. chrysomelas, and S. vexillaris, all of which preferred larger types of prey and seemed more like pursuers. The closely related S. carnatus and S. chrysomelas were quite similar in diet, eating primarily medium sized demersal invertebrates, especially crabs and shrimp. S. vexillaris ate fewer crabs and shrimp but more large-sized fish and octopus than the latter two species. Its more active life style indicates that it may react to prey at greater distances and have a larger home range than these species, as has been predicted for pursuers feeding on larger (and rarer) prey.

Report of the ICSF-BOBLME India (East Coast) workshop: implementing the FAO voluntary guidelines for securing sustainable small-scale fisheries in the context of food security and poverty eradication (SSF guidelines), 6-7 March 2015, Chennai, India

The workshop titled, ICSF-BOBLME India (East Coast) Workshop on Implementing the FAO Voluntary Guidelines for Securing Sustainable Small-scale fisheries in the Context of Food Security and Poverty Eradication (SSF Guidelines) was organized by ICSFin collaboration with BOBLME project.The workshop was the third in a series of consultations held in 2015 across the globe to promote the ownership of the SSF Guidelines among different stakeholders. In the run –up to the workshop, ICSF, with support from BOBLME conducted six consultation meetings with fishworkers and fishworker organizations along the east coast of India in January and February 2015. One hundred participants from India’s eastern coastal states of West Bengal, Odisha, Andhra Pradesh, Tamil Nadu and Puducherry, including women fishworkers, representatives of fishworker organizations, representatives from Department of Fisheries and other concerned departments at state and central level, Multilateral agencies, Inter-governmental organizations, Research Institutions met at Chennai, 6-7 March, 2015. The workshop was structured to facilitate active interaction and discussion among participants, taking into account linguistic diversity and the contextual differences of the marine and inland sectors. This publication—the proceedings of the Chennai workshop—will be useful for fishworker organizations, researchers, policymakers, members of civil society and anyone interested in fisheries and livelihoods.

The demonstration of chemosensory food detection in Hymenocera picta Dana (Decapoda, Caridea), a proposed predator of the crown-of-thorns starfish Acanthaster planci (L)

Hymenocera picta, the painted shrimp, is a possible predator of A canthaster planci. the crown-of-thorns starfish. H. picta detects food by chemical cues alone and visual cues play no part in the initial location of prey. The presence of food in the water causes the shrimp to become more active, and distance chemoreceptors are probably present in the antennules of the shrimp. Extract of A. planci has statistically similar attractive powers to an extract of Linckia multifora, the starfish supplied as food to the shrimps. The painted shrimp was not attracted to fish extract (Chaetodon sp.) and may respond only to starfish. It is suggested that although H. picta is able to kill and feed on small juvenile A. planci. it is probably an ineffective predator against larger adult Crown-of-thorns starfish.

Mathematical modelling and optimisation of the formulation and manufacture of aggregate food products

In this PhD study, mathematical modelling and optimisation of granola production has been carried out. Granola is an aggregated food product used in breakfast cereals and cereal bars. It is a baked crispy food product typically incorporating oats, other cereals and nuts bound together with a binder, such as honey, water and oil, to form a structured unit aggregate. In this work, the design and operation of two parallel processes to produce aggregate granola products were incorporated: i) a high shear mixing granulation stage (in a designated granulator) followed by drying/toasting in an oven. ii) a continuous fluidised bed followed by drying/toasting in an oven. In addition, the particle breakage of granola during pneumatic conveying produced by both a high shear granulator (HSG) and fluidised bed granulator (FBG) process were examined. Products were pneumatically conveyed in a purpose built conveying rig designed to mimic product conveying and packaging. Three different conveying rig configurations were employed; a straight pipe, a rig consisting two 45° bends and one with 90° bend. It was observed that the least amount of breakage occurred in the straight pipe while the most breakage occurred at 90° bend pipe. Moreover, lower levels of breakage were observed in two 45° bend pipe than the 90° bend vi pipe configuration. In general, increasing the impact angle increases the degree of breakage. Additionally for the granules produced in the HSG, those produced at 300 rpm have the lowest breakage rates while the granules produced at 150 rpm have the highest breakage rates. This effect clearly the importance of shear history (during granule production) on breakage rates during subsequent processing. In terms of the FBG there was no single operating parameter that was deemed to have a significant effect on breakage during subsequent conveying. A population balance model was developed to analyse the particle breakage occurring during pneumatic conveying. The population balance equations that govern this breakage process are solved using discretization. The Markov chain method was used for the solution of PBEs for this process. This study found that increasing the air velocity (by increasing the air pressure to the rig), results in increased breakage among granola aggregates. Furthermore, the analysis carried out in this work provides that a greater degree of breakage of granola aggregates occur in line with an increase in bend angle.

Hybrid integration and packaging of grating-coupled silicon photonics

This thesis covers both the packaging of silicon photonic devices with fiber inputs and outputs as well as the integration of laser light sources with these same devices. The principal challenge in both of these pursuits is coupling light into the submicrometer waveguides that are the hallmark of silicon-on-insulator (SOI) systems. Previous work on grating couplers is leveraged to design new approaches to bridge the gap between the highly-integrated domain of silicon, the Interconnected world of fiber and the active region of III-V materials. First, a novel process for the planar packaging of grating couplers with fibers is explored in detail. This technology allows the creation of easy-to-use test platforms for laser integration and also stands on its own merits as an enabling technology for next-generation silicon photonics systems. The alignment tolerances of this process are shown to be well-suited to a passive alignment process and for wafer-scale assembly. Furthermore, this technology has already been used to package demonstrators for research partners and is included in the offerings of the ePIXfab silicon photonics foundry and as a design kit for PhoeniX Software’s MaskEngineer product. After this, a process for hybridly integrating a discrete edge-emitting laser with a silicon photonic circuit using near-vertical coupling is developed and characterized. The details of the various steps of the design process are given, including mechanical, thermal, optical and electrical steps. The interrelation of these design domains is also discussed. The construction process for a demonstrator is outlined, and measurements are presented of a series of single-wavelength Fabry-Pérot lasers along with a two-section laser tunable in the telecommunications C-band. The suitability and potential of this technology for mass manufacture is demonstrated, with further opportunities for improvement detailed and discussed in the conclusion.