The influence of family history of hypertension on disease prevalence and associated metabolic risk factors among Sri Lankan adults

Background Hypertension is a major contributor to the global non-communicable disease burden. Family history is an important non-modifiable risk factor for hypertension. The present study aims to describe the influence of family history (FH) on hypertension prevalence and associated metabolic risk factors in a large cohort of South Asian adults, from a nationally representative sample from Sri Lanka. Methods A cross-sectional survey among 5,000 Sri Lankan adults, evaluating FH at the levels of parents, grandparents, siblings and children. A binary logistic regression analysis was performed in all patients with ‘presence of hypertension’ as dichotomous dependent variable and using family history in parents, grandparents, siblings and children as binary independent variables. The adjusted odds ratio controlling for confounders (age, gender, body mass index, diabetes, hyperlipidemia and physical activity) are presented below. Results In all adults the prevalence of hypertension was significantly higher in patients with a FH (29.3 %, n = 572/1951) than those without (24.4 %, n = 616/2530) (p < 0.001). Presence of a FH significantly increased the risk of hypertension (OR:1.29; 95 % CI:1.13-1.47), obesity (OR:1.36; 95 % CI: 1.27–1.45), central obesity (OR:1.30; 95 % CI 1.22–1.40) and metabolic syndrome (OR:1.19; 95 % CI: 1.08–1.30). In all adults presence of family history in parents (OR:1.28; 95 % CI: 1.12–1.48), grandparents (OR:1.34; 95 % CI: 1.20–1.50) and siblings (OR:1.27; 95 % CI: 1.21–1.33) all were associated with significantly increased risk of developing hypertension. Conclusions Our results show that the prevalence of hypertension was significantly higher in those with a FH of hypertension. FH of hypertension was also associated with the prevalence of obesity, central obesity and metabolic syndrome. Individuals with a FH of hypertension form an easily identifiable group who may benefit from targeted interventions.

Fall rates in hospital rehabilitation units after individualised patient and staff education programmes: A pragmatic, stepped-wedge, cluster-randomised controlled trial

- Background Falls are the most frequent adverse events that are reported in hospitals. We examined the effectiveness of individualised falls-prevention education for patients, supported by training and feedback for staff, delivered as a ward-level programme. - Methods Eight rehabilitation units in general hospitals in Australia participated in this stepped-wedge, cluster-randomised study, undertaken during a 50 week period. Units were randomly assigned to intervention or control groups by use of computer-generated, random allocation sequences. We included patients admitted to the unit during the study with a Mini-Mental State Examination (MMSE) score of more than 23/30 to receive individualised education that was based on principles of changes in health behaviour from a trained health professional, in addition to usual care. We provided information about patients' goals, feedback about the ward environment, and perceived barriers to engagement in falls-prevention strategies to staff who were trained to support the uptake of strategies by patients. The coprimary outcome measures were patient rate of falls per 1000 patient-days and the proportion of patients who were fallers. All analyses were by intention to treat. This trial is registered with the Australian New Zealand Clinical Trials registry, number ACTRN12612000877886). - Findings Between Jan 13, and Dec 27, 2013, 3606 patients were admitted to the eight units (n=1983 control period; n=1623 intervention period). There were fewer falls (n=196, 7·80/1000 patient-days vs n=380, 13·78/1000 patient-days, adjusted rate ratio 0·60 [robust 95% CI 0·42–0·94], p=0·003), injurious falls (n=66, 2·63/1000 patient-days vs 131, 4·75/1000 patient-days, 0·65 [robust 95% CI 0·42–0·88], p=0·006), and fallers (n=136 [8·38%] vs n=248 [12·51%] adjusted odds ratio 0·55 [robust 95% CI 0·38 to 0·81], p=0·003) in the intervention compared with the control group. There was no significant difference in length of stay (intervention median 11 days [IQR 7–19], control 10 days [6–18]). - Interpretation Individualised patient education programmes combined with training and feedback to staff added to usual care reduces the rates of falls and injurious falls in older patients in rehabilitation hospital-units.

Suomi kasvitieteen kieleksi : Elias Lönnrot termistön kehittäjänä

The development of botanical Finnish: Elias Lönnrot as the creator of new terminology In the 19th century the Finnish language was intentionally developed to meet the demands of civilised society and Finnish-language science. The development of the language involved several people from different fields of science. This study examines this enormous project in the field of botany. By which methods were scientific terms formed, and for which reasons were those terms used? Why has a certain word been chosen to represent a particular concept? The material of this study is the terminology of plant morphology in Finnish that Elias Lönnrot developed in the middle of the 19th century. The terms of plant morphology denote and describe the parts of the plant and the relationships between those parts. For instance, the terms emi pistill , hede stamen , terälehti petal and verholehti sepal , which are nowadays familiar in the general language, were used for the first time in Lönnrot s texts. The study integrates the methods of lexicology and terminology. In lexicology, the word and its various meanings serve as the focus, whereas the theory of terminology focuses on the concept and concept systems. A new, consciously developed terminology can be understood through the old, familiar vocabulary and structures as well as through the new, logical term system. Lönnrot s botanical terminology can be divided into three groups depending on their origin: 1) 19% of all terms have been accepted from the existing vocabulary and used in their original meanings, 2) 11% of all terms have been chosen from the existing vocabulary and used in the new, specific botanical meanings, and 3) 70% of all terms have been created on the basis of the existing vocabulary and used in the new, specific botanical meanings. Therefore, the study reveals that domestic materials primarily morphosemantic neologisms form the Finnish terminology of plant morphology. Characteristic of Lönnrot s botanical terms is the utilisation of the vocabulary of various Finnish dialects and particular repeating elements. Repeating elements include, for example, the prefixes that come from botanical Latin or Swedish as well as the particular Finnish derivation types. Such structures form term systems that reflect scientific concept systems. Two thirds of the created new words are formed loosely or precisely according to either Latin or Swedish terms; one third is formed completely differently from its equivalents in the foreign languages. Approximately half of the chosen terms are formed differently from the Latin and Swedish terms. It is worth noting that many loan translations use rare vocabulary from Finnish dialects as equivalents to foreign parts of terms. Lönnrot aimed to inspire scientific terminology with Finland s own language, thus making scientific text accessible to the Finnish agricultural population.

An annotated checklist of smut fungi (Ustilaginomycetes) from Thailand

An annotated checklist of the smut fungi (Ustilaginomycetes) from Thailand has been compiled after an examination of the scientific literature, previously deposited herbarium specimens and specimens collected by the authors during a survey in December 2005. Fifty-two species of smut fungi are listed, including 11 species which were newly discovered during our survey. Most of these smut fungi are reported for the first time from Thailand. Several species are very rare, being known only from the type material or a limited number of collections.

Fire resistance of light gauge steel frame wall systems lined with gypsum plasterboards

Light gauge steel frame (LSF) wall systems are increasingly used in residential and commercial buildings as load bearing and non-load bearing elements. Conventionally, the fire resistance ratings of such building elements are determined using approximate prescriptive methods based on limited standard fire tests. However, recent studies have shown that in some instances real building fire time-temperature curves could be more severe than the standard fire curve, in terms of maximum temperature and rate of temperature rise. This has caused problems for safe evacuation and rescue activities, and in some instances has also lead to the collapse of buildings earlier than the prescribed fire resistance. Therefore a detailed research study into the performance of LSF wall systems under both standard fire and realistic fire conditions was undertaken using full scale fire tests to understand the fire performance of different LSF wall configurations. Both load bearing and non-load bearing full scale fire tests were performed on LSF walls configurations which included single layer, double layer, externally insulated wall panels made up of different steel sections and thicknesses of gypsum plasterboards. The non-load bearing fire test results were utilized to understand the factors affecting the fire resistance of LSF walls, while loading bearing fire test results led to development of simplified methods to predict the fire resistance ratings of load bearing LSF walls exposed to both standard and realistic design fires. This paper presents the results of full scale experimental study and highlights the effects of standard and realistic fire conditions on fire performance of LSF walls.

The Crystal Structure of Pivaloyl- D- prolyl-L- prolyl- L-alanyl-N- methylamide

Pivaloyl-D-prolyl-L-prolyl-L-analyl-N-methylam~de (I), C1UH32N40c4r,y stallizes in the orthorhombic space group P21212,w ith four molecules in a unit cell of dimensions a = 9.982 (l),b = 10.183 (3), c = 20.746 (2)A . The structure has been refined to R 0.048 for 1 745 observed reflections. All the peptide bonds in the molecule are trans and both the prolyl residues are in the CY-exo-conformation. The molecule assumes a highly folded conformation in which a Type II' DL bend is followed by a Type I LL bend, both stabilised by intramolecular 4 + 1 hydrogen bonds. This conformation, which has been observed for the first time, is of interest in relation to the structure of gramicidin S.

Structural studies of analgesics and their interactions. Part 4. Crystal structures of phenylbutazone and a 2 : 1 complex between phenylbutazone and piperazine

The X-ray crystal structures of 4-butyl-1,2-diphenylpyrazolidine-3,5-dione (phenylbutazone)(I). and its 2 : 1 complex (II) with piperazine have been determined by direct methods and the structures refined to R 0.096 (2 300 observed reflections measured by diffractometer) and 0.074 (2 494 observed reflections visuallyestimated). Crystals are monoclinic, space group P21/c; for (I)a= 21.695(4), b= 5.823(2), c= 27.881(4)Å, = 108.06 (10)°, Z= 8, and for (II)a= 8.048(4), b= 15.081(4), c= 15.583(7)Å, = 95.9(3)°, Z= 2. The two crystallographically independant molecules in the structure of (I) are similar except for the conformation of the butyl group, which is disordered in one of the molecules. In the pyrazolidinedione group, the two C–C bonds are single and the two C–O bonds double. The two nitrogen atoms in the five-membered ring are pyramidal with the attached phenyl groups lying on the opposite sides of the mean plane of the ring. The phenylbutazone molecule in (II) exists as a negative ion owing to deprotonation of C-4. C-4 is therefore trigonal and the orientation of the Bu group with respect to the pyrazolidinedione group is considerably different from that in (I); there is also considerable electron delocalization along the C–O and C–C bonds. These changes in geometry and electronic structure may relate to biological activity. The doubly charged cationic piperazine molecule exists in the chair form with the nitrogen atoms at the apices. The crystal structure of (II) is stabilized by ionic interactions and N–H O hydrogen bonds.

Molecular Alterations in Asbestos-Related Lung Cancer

Background: Asbestos is a well known cancer-causing mineral fibre, which has a synergistic effect on lung cancer risk in combination with tobacco smoking. Several in vitro and in vivo experiments have demonstrated that asbestos can evoke chromosomal damage and cause alterations as well as gene expression changes. Lung tumours, in general, have very complex karyotypes with several recurrently gained and lost chromosomal regions and this has made it difficult to identify specific molecular changes related primarily to asbestos exposure. The main aim of these studies has been to characterize asbestos-related lung cancer at a molecular level. Methods: Samples from asbestos-exposed and non-exposed lung cancer patients were studied using array comparative genomic hybridization (aCGH) and fluorescent in situ hybridization (FISH) to detect copy number alterations (CNA) as well as microsatellite analysis to detect allelic imbalance (AI). In addition, asbestos-exposed cell lines were studied using gene expression microarrays. Results: Eighteen chromosomal regions showing differential copy number in the lung tumours of asbestos-exposed patients compared to those of non-exposed patients were identified. The most significant differences were detected at 2p21-p16.3, 5q35.3, 9q33.3-q34.11, 9q34.13-q34.3, 11p15.5, 14q11.2 and 19p13.1-p13.3 (p<0.005). The alterations at 2p and 9q were validated and characterized in detail using AI and FISH analysis in a larger study population. Furthermore, in vitro studies were performed to examine the early gene expression changes induced by asbestos in three different lung cell lines. The results revealed specific asbestos-associated gene expression profiles and biological processes as well as chromosomal regions enriched with genes believed to contribute to the common asbestos-related responses in the cell lines. Interestingly, the most significant region enriched with asbestos-response genes was identified at 2p22, close to the previously identified region showing asbestos-related CNA in lung tumours. Additionally, in this thesis, the dysregulated biological processes (Gene Ontology terms) detected in the cell line experiment were compared to dysregulated processes identified in patient samples in a later study (Ruosaari et al., 2008a). Commonly affected processes such as those related to protein ubiquitination, ion transport and surprisingly sensory perception of smell were identified. Conclusions: The identification of specific CNA and dysregulated biological processes shed some light on the underlying genes acting as mediators in asbestos-related lung carcinogenesis. It is postulated that the combination of several asbestos-specific molecular alterations could be used to develop a diagnostic method for the identification of asbestos-related lung cancer.

Design Optimization of Field Emission From A Stacked Carbon Nanotube Array

Fluctuation of field emission in carbon nanotubes (CNTs) is riot desirable in many applications and the design of biomedical x-ray devices is one of them. In these applications, it is of great importance to have precise control of electron beams over multiple spatio-temporal scales. In this paper, a new design is proposed in order to optimize the field emission performance of CNT arrays. A diode configuration is used for analysis, where arrays of CNTs act as cathode. The results indicate that the linear height distribution of CNTs, as proposed in this study, shows more stable performance than the conventionally used unifrom distribution.

Experimental study on behaviour of concrete filled double skin tube columns under lateral impact loading

This paper presents an experimental investigation on the lateral impact response of axially loaded concrete filled double skin tube (CFDST) columns. A total of four test series are being conducted at Queensland University of Technology using a novel horizontal impact-testing rig. The test results reported in this paper are from the first test series, where the columns are pinned at both ends and impacted at mid-span. In the next three series, effects of support conditions, impact location and repeated impact will be treated. The main objectives of the current paper are to describe the innovative testing procedure and provide some insight into the lateral impact behavior and failure of simply supported axially pre-loaded CFDST columns. The results include time histories of impact forces, reaction forces, axial force and global lateral deflection. Based on the test data, the failure mode, peak impact force, peak reaction forces, maximum deflection and residual deflection, with and without axial load, are analyzed and discussed. The findings of this study will serve as a benchmark reference for future analysis and design of CFDST columns.

Making sense of a trial maths intervention program for teachers of students with disability in Australia: Interim report

The Disability Standards for Education (2005) and the Australian Curriculum, Assessment and Reporting Authority relevant standards underscore the right of students with disability to access the curriculum on the same basis as students without disability. Students with disability are entitled to rigorous, relevant and engaging learning opportunities drawn from the Australian curriculum content. Taking this context into account, this paper provides a work-in-progress report on a two-year mathematics intervention project conducted in 12 special schools (Preparatory-Year 12) in Queensland, Australia. The project aims to build the capacity of teachers to teach mathematics to their students and to identify and make sense of the intervention program’s impact. It combines two approaches—appreciative inquiry and action research to monitor schools’ change processes. The interim findings demonstrated that teachers were concerned about their students’ underachievement in mathematics and that the multi-sensory forms of teaching advocated in the program increased student engagement and performance.

Dielectric relaxation and electrical conductivity in Bi5NbO10 oxygen ion conductors prepared by a modified sol–gel process

Crystalline Bi5NbO10 nanoparticles have been achieved through a modified sol–gel process using a mixture of ethylenediamine and ethanolamine as a solvent. The Bi5NbO10 nanoparticles were characterized by X-ray diffraction (XRD), differential scanning calorimetry/thermogravimetry (DSC/TG), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM) and Raman spectroscopy. The results showed that well-dispersed 5–60 nm Bi5NbO10 nanoparticles were prepared through heat-treating the precursor at 650 °C and the high density pellets were obtained at temperatures lower than those commonly employed. The frequency and temperature dependence of the dielectric constant and the electrical conductivity of the Bi5NbO10 solid solutions were investigated in the 0.1 Hz to 1 MHz frequency range. Two distinct relaxation mechanisms were observed in the plots of dielectric loss and the imaginary part of impedance (Z″) versus frequency in the temperature range of 200–350 °C. The dielectric constant and the loss in the low frequency regime were electrode dependent. The ionic conductivity of Bi5NbO10 solid solutions at 700 °C is 2.86 Ω−1 m−1 which is in same order of magnitude for Y2O3-stabilized ZrO2 ceramics at same temperature. These results suggest that Bi5NbO10 is a promising material for an oxygen ion conductor.

Association of methylenetetrahydrofolate reductase gene polymorphisms & colorectal cancer in India

Background & objectives: Methylenetetrahydrofolate reductase (MTHFR) is a critical enzyme in folate metabolism and involved in DNA synthesis, DNA repair and DNA methylation. The two common functional polymorphisms of MTHFR, 677C -> T and 1298 A -> C have shown to impact several diseases including cancer. This case-control study was undertaken to analyse the association of the MTHFR gene polymorphisms 677 C -> T and 1298 A -> C and risk of colorectal cancer (CRC).Methods: One hundred patients with a confirmed histopathologic diagnosis of CRC and 86 age and gender matched controls with no history of cancer were taken for this study. DNA was isolated from peripheral blood samples and the genotypes were determined by PCR-RFLP. The risk association was estimated by compounding odds ratio (OR) with 95 per cent confidence interval (CI). Results: Genotype frequency of MTHFR 677 CC, CT and TT were 76.7, 22.1 and 1.16 per cent in controls, and 74,25 and 1.0 per cent among patients. The 'T' allele frequency was 12.21 and 13.5 per cent in controls and patients respectively. The genotype frequency of MTHFR 1298 AA, AC, and CC were 25.6, 58.1 and 16.3 per cent for controls and 22, 70 and 8 per cent for patents respectively. The 'C' allele frequency for 1298 A -> C was 43.0 and 45.3 per cent respectively for controls and patients. The OR for 677 CT was 1.18 (95% CI 0.59-2.32, P = 0.642), OR for 1298 AC was 1.68 (95% CI 0.92-3.08, P = 0.092) and OR for 1298 CC was 0.45(95% CI 0.18-1.12, P = 0.081). The OR for the combined heterozygous state (677 CT and 1298 AC) was 1.18(95% CI 0.52-2.64, P =0.697).Interpretation & conclusion: The frequency of the MTHFR 677 TT genotype is rare as compared to 1298 CC genotype in the population studied. There was no association between 677 C -> T and 1298 A -> C polymorphisms and risk of CRC either individually or in combination. The homozygous state for 1298 A -> C polymorphism appears to slightly lower risk of CRC. This needs to be confirmed with a larger sample size.

Determinants and Consequences of Information Sharing with Key Suppliers

As companies become more efficient with respect to their internal processes, they begin to shift the focus beyond their corporate boundaries. Thus, the recent years have witnessed an increased interest by practitioners and researchers in interorganizational collaboration, which promises better firm performance through more effective supply chain management. It is no coincidence that this interest comes in parallel with the recent advancements in Information and Communication Technologies, which offer many new collaboration possibilities for companies. However, collaboration, or any other type of supply chain integration effort, relies heavily on information sharing. Hence, this study focuses on information sharing, in particular on the factors that determine it and on its value. The empirical evidence from Finnish and Swedish companies suggests that uncertainty (both demand and environmental) and dependency in terms of switching costs and asset specific investments are significant determinants of information sharing. Results also indicate that information sharing improves company performance regarding resource usage, output, and flexibility. However, companies share information more intensely at the operational rather than the strategic level. The use of supply chain practices and technologies is substantial but varies across the two countries. This study sheds light on a common trend in supply chains today. Whereas the results confirm the value of information sharing, the contingent factors help to explain why the intensity of information shared across companies differ. In the future, competitive pressures and uncertainty are likely to intensify. Therefore, companies may want to continue with their integration efforts by focusing on the determinants discussed in this study. However, at the same time, the possibility of opportunistic behavior by the exchange partner cannot be disregarded.