Quantitative methods of estimating groundwater supplies /

Mode of access: Internet.

Applying quantitative methods in the assessment of outcomes of pharmacotherapy of psoriasis

Healthcare providers and policy makers are faced with an ever-increasing number of medical publications. Searching for relevant information and keeping up to date with new research findings remains a constant challenge. It has been widely acknowledged that narrative reviews of the literature are susceptible to several types of bias and a systematic approach may protect against these biases. The aim of this thesis was to apply quantitative methods in the assessment of outcomes of topical therapies for psoriasis. In particular, to systematically examine the comparative efficacy, tolerability and cost-effectiveness of topical calcipotriol in the treatment of mild-to-moderate psoriasis. Over the years, a wide range of techniques have been used to evaluate the severity of psoriasis and the outcomes from treatment. This lack of standardisation complicates the direct comparison of results and ultimately the pooling of outcomes from different clinical trials. There is a clear requirement for more comprehensive tools for measuring drug efficacy and disease severity in psoriasis. Ideally, the outcome measures need to be simple, relevant, practical, and widely applicable, and the instruments should be reliable, valid and responsive. The results of the meta-analysis reported herein show that calcipotriol is an effective antipsoriatic agent. In the short-tenn, the pooled data found calcipotriol to be more effective than calcitriol, tacalcitol, coal tar and short-contact dithranol. Only potent corticosteroids appeared to have comparable efficacy, with less short-term side-effects. Potent corticosteroids also added to the antipsoriatic effect of calcipotriol, and appeared to suppress the occurrence of calcipotriol-induced irritation. There was insufficient evidence to support any large effects in favour of improvements in efficacy when calcipotriol is used in combination with systemic therapies in patients with severe psoriasis. However, there was a total absence of long-term morbidity data on the effectiveness of any of the interventions studied. Decision analysis showed that, from the perspective of the NHS as payer, the relatively small differences in efficacy between calcipotriol and short-contact dithranol lead to large differences in the direct cost of treating patients with mildto-moderate plaque psoriasis. Further research is needed to examine the clinical and economic issues affecting patients under treatment for psoriasis in the UK. In particular, the maintenance value and cost/benefit ratio for the various treatment strategies, and the assessment of patient's preferences has not yet been adequately addressed for this chronic recurring disease.

Quantitative methods in neuropathology

The last decade has seen a considerable increase in the application of quantitative methods in the study of histological sections of brain tissue and especially in the study of neurodegenerative disease. These disorders are characterised by the deposition and aggregation of abnormal or misfolded proteins in the form of extracellular protein deposits such as senile plaques (SP) and intracellular inclusions such as neurofibrillary tangles (NFT). Quantification of brain lesions and studying the relationships between lesions and normal anatomical features of the brain, including neurons, glial cells, and blood vessels, has become an important method of elucidating disease pathogenesis. This review describes methods for quantifying the abundance of a histological feature such as density, frequency, and 'load' and the sampling methods by which quantitative measures can be obtained including plot/quadrat sampling, transect sampling, and the point-quarter method. In addition, methods for determining the spatial pattern of a histological feature, i.e., whether the feature is distributed at random, regularly, or is aggregated into clusters, are described. These methods include the use of the Poisson and binomial distributions, pattern analysis by regression, Fourier analysis, and methods based on mapped point patterns. Finally, the statistical methods available for studying the degree of spatial correlation between pathological lesions and neurons, glial cells, and blood vessels are described.

“Mind the gap”: Qualitative Researchers and Mixed Methods Research

This paper presents a heuristic investigation of mixed methods organized around three pairs of opposing standpoints: methods (qualitative vs. quantitative), paradigms (constructivist vs. post positive), and inquiry approaches (dialectical vs. pragmatic).

Methods matter: computational modelling in public health policy and planning

This work is aimed at understanding and unifying information on epidemiological modelling methods and how those methods relate to public policy addressing human health, specifically in the context of infectious disease prevention, pandemic planning, and health behaviour change. This thesis employs multiple qualitative and quantitative methods, and presents as a manuscript of several individual, data-driven projects that are combined in a narrative arc. The first chapter introduces the scope and complexity of this interdisciplinary undertaking, describing several topical intersections of importance. The second chapter begins the presentation of original data, and describes in detail two exercises in computational epidemiological modelling pertinent to pandemic influenza planning and policy, and progresses in the next chapter to present additional original data on how the confidence of the public in modelling methodology may have an effect on their planned health behaviour change as recommended in public health policy. The thesis narrative continues in the final data-driven chapter to describe how health policymakers use modelling methods and scientific evidence to inform and construct health policies for the prevention of infectious diseases, and concludes with a narrative chapter that evaluates the breadth of this data and recommends strategies for the optimal use of modelling methodologies when informing public health policy in applied public health scenarios.

The Effect of using online homework exercises on student achievement in a Quantitative methods course

Abstract: Quantitative Methods (QM) is a compulsory course in the Social Science program in CEGEP. Many QM instructors assign a number of homework exercises to give students the opportunity to practice the statistical methods, which enhances their learning. However, traditional written exercises have two significant disadvantages. The first is that the feedback process is often very slow. The second disadvantage is that written exercises can generate a large amount of correcting for the instructor. WeBWorK is an open-source system that allows instructors to write exercises which students answer online. Although originally designed to write exercises for math and science students, WeBWorK programming allows for the creation of a variety of questions which can be used in the Quantitative Methods course. Because many statistical exercises generate objective and quantitative answers, the system is able to instantly assess students’ responses and tell them whether they are right or wrong. This immediate feedback has been shown to be theoretically conducive to positive learning outcomes. In addition, the system can be set up to allow students to re-try the problem if they got it wrong. This has benefits both in terms of student motivation and reinforcing learning. Through the use of a quasi-experiment, this research project measured and analysed the effects of using WeBWorK exercises in the Quantitative Methods course at Vanier College. Three specific research questions were addressed. First, we looked at whether students who did the WeBWorK exercises got better grades than students who did written exercises. Second, we looked at whether students who completed more of the WeBWorK exercises got better grades than students who completed fewer of the WeBWorK exercises. Finally, we used a self-report survey to find out what students’ perceptions and opinions were of the WeBWorK and the written exercises. For the first research question, a crossover design was used in order to compare whether the group that did WeBWorK problems during one unit would score significantly higher on that unit test than the other group that did the written problems. We found no significant difference in grades between students who did the WeBWorK exercises and students who did the written exercises. The second research question looked at whether students who completed more of the WeBWorK exercises would get significantly higher grades than students who completed fewer of the WeBWorK exercises. The straight-line relationship between number of WeBWorK exercises completed and grades was positive in both groups. However, the correlation coefficients for these two variables showed no real pattern. Our third research question was investigated by using a survey to elicit students’ perceptions and opinions regarding the WeBWorK and written exercises. Students reported no difference in the amount of effort put into completing each type of exercise. Students were also asked to rate each type of exercise along six dimensions and a composite score was calculated. Overall, students gave a significantly higher score to the written exercises, and reported that they found the written exercises were better for understanding the basic statistical concepts and for learning the basic statistical methods. However, when presented with the choice of having only written or only WeBWorK exercises, slightly more students preferred or strongly preferred having only WeBWorK exercises. The results of this research suggest that the advantages of using WeBWorK to teach Quantitative Methods are variable. The WeBWorK system offers immediate feedback, which often seems to motivate students to try again if they do not have the correct answer. However, this does not necessarily translate into better performance on the written tests and on the final exam. What has been learned is that the WeBWorK system can be used by interested instructors to enhance student learning in the Quantitative Methods course. Further research may examine more specifically how this system can be used more effectively.

Study of wheel-rail impact at insulated rail joint through experimental and numerical methods

As part of an ongoing research on the development of a longer life insulated rail joint (IRJ), this paper reports a field experiment and a simplified 2D numerical modelling for the purpose of investigating the behaviour of rail web in the vicinity of endpost in an insulated rail joint (IRJ) due to wheel passages. A simplified 2D plane stress finite element model is used to simulate the wheel-rail rolling contact impact at IRJ. This model is validated using data from a strain gauged IRJ that was installed in a heavy haul network; data in terms of the vertical and shear strains at specific positions of the IRJ during train passing were captured and compared with the results of the FE model. The comparison indicates a satisfactory agreement between the FE model and the field testing. Furthermore, it demonstrates that the experimental and numerical analyses reported in this paper provide a valuable datum for developing further insight into the behaviour of IRJ under wheel impacts.

Bilski v Kappos : The United States Supreme Court delivers mixed views on patenting non-physical inventions and business methods

The United States Supreme Court has handed down a once in a generation patent law decision that will have important ramifications for the patentability of non-physical methods, both internationally and in Australia. In Bilski v Kappos, the Supreme Court considered whether an invention must either be tied to a machine or apparatus, or transform an article into a different state or thing to be patentable. It also considered for the first time whether business methods are patentable subject matter. The decision will be of particular interest to practitioners who followed the litigation in Grant v Commissioner of Patents, a Federal Court decision in which a Brisbane-based inventor was denied a patent over a method of protecting an asset from the claims of creditors.

An introduction to mixed methods research for nephrology nurses

Mixed methods research is the use of qualitative and quantitative methods in the same study to gain a more rounded and holistic understanding of the phenomena under investigation. This type of research approach is gaining popularity in the nursing literature as a way to understand the complexity of nursing care and as a means to enhance evidenced-based practice. This paper introduces nephrology nurses to mixed methods research, its terminology and application to nephrology nursing. Five common mixed methods designs will be described highlighting the purposes, strengths and weaknesses of each design. Examples of mixed methods research will be given to illustrate the wide application of mixed methods research to nursing and its usefulness in nephrology nursing research.

Parametric and generative methods with building information modelling : connecting BIM with explorative design modelling

Parametric and generative modelling methods are ways in which computer models are made more flexible, and of formalising domain-specific knowledge. At present, no open standard exists for the interchange of parametric and generative information. The Industry Foundation Classes (IFC) which are an open standard for interoperability in building information models is presented as the base for an open standard in parametric modelling. The advantage of allowing parametric and generative representations are that the early design process can allow for more iteration and changes can be implemented quicker than with traditional models. This paper begins with a formal definition of what constitutes to be parametric and generative modelling methods and then proceeds to describe an open standard in which the interchange of components could be implemented. As an illustrative example of generative design, Frazer’s ‘Reptiles’ project from 1968 is reinterpreted.

A practical comparison of manual and autonomous methods for acoustic monitoring

1. Autonomous acoustic recorders are widely available and can provide a highly efficient method of species monitoring, especially when coupled with software to automate data processing. However, the adoption of these techniques is restricted by a lack of direct comparisons with existing manual field surveys. 2. We assessed the performance of autonomous methods by comparing manual and automated examination of acoustic recordings with a field-listening survey, using commercially available autonomous recorders and custom call detection and classification software. We compared the detection capability, time requirements, areal coverage and weather condition bias of these three methods using an established call monitoring programme for a nocturnal bird, the little spotted kiwi(Apteryx owenii). 3. The autonomous recorder methods had very high precision (>98%) and required <3% of the time needed for the field survey. They were less sensitive, with visual spectrogram inspection recovering 80% of the total calls detected and automated call detection 40%, although this recall increased with signal strength. The areal coverage of the spectrogram inspection and automatic detection methods were 85% and 42% of the field survey. The methods using autonomous recorders were more adversely affected by wind and did not show a positive association between ground moisture and call rates that was apparent from the field counts. However, all methods produced the same results for the most important conservation information from the survey: the annual change in calling activity. 4. Autonomous monitoring techniques incur different biases to manual surveys and so can yield different ecological conclusions if sampling is not adjusted accordingly. Nevertheless, the sensitivity, robustness and high accuracy of automated acoustic methods demonstrate that they offer a suitable and extremely efficient alternative to field observer point counts for species monitoring.

Novel channel tracking and equalization methods in MU-MIMO-OFDM systems

The methodology undertaken, the channel model and the system model created for developing a novel adaptive equalization method and a novel channel tracking method for uplink of MU-MIMO-OFDM systems is presented in this paper. The results show that the channel tracking method works with 97% accuracy, while the training-based initial channel estimation method shows poor performance in estimating the actual channel comparatively.