Erosion-fatigue of steam turbine blades

The premature failure of steam turbine rotor blades, manufactured in forged 12% Cr-NiMoV martensitic stainless steel, was investigated using visual inspection non-destructive testing, macro and microfractography, microstructural characterization, EDS microanalysis, chemical analysis, micro hardness and tensile testing. The blades belonged to the last stage of a thermoelectric plant steam turbine generator (140 MV A). The results indicated that the failure of the blades was promoted by foreign-particle erosion, which attacked preferentially the low-pressure side of the lower trailing edge of the blades. The resulting wear grooves acted as stress raisers and promoted the nucleation of fatigue cracks, which probably grew during the transition events of the steam turbine operation. Finally, water drop erosion was observed on the blade upper leading edge (low-pressure side). (C) 2009 Elsevier Ltd. All rights reserved.

Comparison of the chemical composition of the essential oil and the water soluble oil of Baccharis dracunculifolia DC. (Asteraceae)

This study aimed to evaluate the chemical composition of Baccharis dracunculifolia essential oil and the water soluble oil obtained by steam distillation that were analyzed by GC and GUMS. in the first hour of distillation, B. dracunculifolia aerial parts yielded 0.08% oil and in the second hour, 0.27%. The oil recovered from the distillate water yielded 0.18 g/L in the first hour and 0.44 g/L in the second hour of distillation. The main volatile compounds identified in the distillate water were aromatic compounds and sesquiterpene alcohols.

Oxidation mechanism of Si3N4-bonded SiC ceramics by CO, CO2 and steam

This paper presents a theoretical and experimental investigation into the oxidation reactions of Si3N4-bonded SiC ceramics. Such ceramics which contain a small amount of silicon offer increased oxidation and wear resistance and are widely used as lining refractories in blast furnaces. The thermodynamics of oxidation reactions were studied using the JANAF tables. The weight gain was measured using a thermogravimetric analysis technique to study the kinetics. The temperature range of oxidation measurements is from 1073 to 1573 K and the oxidation atmosphere is water vapour, pure CO and CO-CO2 gas mixtures with various CO-to-CO2 ratios. Thermodynamic simulations showed that the oxidation mechanism of Si3N4-bonded SiC ceramics is passive oxidation and all components contribute to the formation of a silica film. The activated energies of the reactions follow the sequence Si3N4>SiC>Si. The kinetic study revealed that the oxidation of Si3N4-bonded SiC ceramics occurred in a mixed regime controlled by both interface reaction and diffusion through the silica film. Under the atmosphere conditions prevailing in the blast furnace, this ceramic is predicted to be passively oxidized with the chemical reaction rate becoming more dominant as the CO concentration increases. (C) 1998 Chapman & Hall.

A cellulose liquid crystal motor: a steam engine of the second kind

The salient feature of liquid crystal elastomers and networks is strong coupling between orientational order and mechanical strain. Orientational order can be changed by a wide variety of stimuli, including the presence of moisture. Changes in the orientation of constituents give rise to stresses and strains, which result in changes in sample shape. We have utilized this effect to build soft cellulose-based motor driven by humidity. The motor consists of a circular loop of cellulose film, which passes over two wheels. When humid air is present near one of the wheels on one side of the film, with drier air elsewhere, rotation of the wheels results. As the wheels rotate, the humid film dries. The motor runs so long as the difference in humidity is maintained. Our cellulose liquid crystal motor thus extracts mechanical work from a difference in humidity.

Pliocene-quaternary upwelling in the SoutheasternAtlantic may reflect changes in water mass production

Proceedings of tile 1" R.C.A.N.S. Congress, Lisboa, October 1992

The suitability of steam exploded vitis vinifera and alkaline lignin for the manufacture of fiberboard

The main objective of this study was to explore the suitability of Vitis vinifera as a raw material and alkaline lignin as a natural binder for fiberboard manufacturing. In the first step, Vitis vinifera was steam- exploded through a thermo-mechanical vapor process in a batch reactor, and the obtained pulp was dried, ground, and pressed to produce the boards. The effects of pretreatment factors and pressing conditions on the chemical composition of the fibers and the physico-mechanical properties of binderless fiberboards were evaluated, and the conditions that optimize these properties were found. A response surface method based on a central composite design and multiple-response optimization was used. The variables studied and their respective variation ranges were: pretreatment temperature (Tr: 190-210ºC), pretreatment time (tr: 5-10 min), pressing temperature (Tp: 190-210ºC), pressing pressure (Pp: 8-16MPa), and pressing time (tp: 3-7min). The results of the optimization step show that binderless fiberboards have good water resistance and weaker mechanical properties. In the second step, fiberboards based on alkaline lignin and Vitis vinifera pulp produced at the optimal conditions determined for binderless fiberboards were prepared and their physico-mechanical properties were tested. Our results show that the addition of about 15% alkaline lignin leads to the production of fiberboards that fully meet the requirements of the relevant standard specifications

Renal sodium handling in acute and chronic salt loading/depletion protocols: the confounding influence of acute water loading.

OBJECTIVES: Renal tubular sodium handling was measured in healthy subjects submitted to acute and chronic salt-repletion/salt-depletion protocols. The goal was to compare the changes in proximal and distal sodium handling induced by the two procedures using the lithium clearance technique. METHODS: In nine subjects, acute salt loading was obtained with a 2 h infusion of isotonic saline, and salt depletion was induced with a low-salt diet and furosemide. In the chronic protocol, 15 subjects randomly received a low-, a regular- and a high-sodium diet for 1 week. In both protocols, renal and systemic haemodynamics and urinary electrolyte excretion were measured after an acute water load. In the chronic study, sodium handling was also determined, based on 12 h day- and night-time urine collections. RESULTS: The acute and chronic protocols induced comparable changes in sodium excretion, renal haemodynamics and hormonal responses. Yet, the relative contribution of the proximal and distal nephrons to sodium excretion in response to salt loading and depletion differed in the two protocols. Acutely, subjects appeared to regulate sodium balance mainly by the distal nephron, with little contribution of the proximal tubule. In contrast, in the chronic protocol, changes in sodium reabsorption could be measured both in the proximal and distal nephrons. Acute water loading was an important confounding factor which increased sodium excretion by reducing proximal sodium reabsorption. This interference of water was particularly marked in salt-depleted subjects. CONCLUSION: Acute and chronic salt loading/salt depletion protocols investigate different renal mechanisms of control of sodium balance. The endogenous lithium clearance technique is a reliable method to assess proximal sodium reabsorption in humans. However, to investigate sodium handling in diseases such as hypertension, lithium should be measured preferably on 24 h or overnight urine collections to avoid the confounding influence of water.

Technology transfer of an oil-in-water vaccine-adjuvant for strengthening pandemic influenza preparedness in Indonesia.

With the current enzootic circulation of highly pathogenic avian influenza viruses, the ability to increase global pandemic influenza vaccine production capacity is of paramount importance. This has been highlighted by, and is one of the main pillars of, the WHO Global Action Plan for Influenza Vaccines (GAP). Such capacity expansion is especially relevant in developing countries. The Vaccine Formulation Laboratory at University of Lausanne is engaged in the technology transfer of an antigen-sparing oil-in-water adjuvant in order to empower developing countries vaccine manufacturers to increase pandemic influenza vaccine capacity. In a one-year project funded by United States Department of Health and Human Services, the Vaccine Formulation Laboratory transferred the process know-how and associated equipment for the pilot-scale manufacturing of an oil-in-water adjuvant to Bio Farma, Indonesia's state-owned vaccine manufacturer, for subsequent formulation with H5N1 pandemic influenza vaccines. This paper describes the experience acquired and lessons learnt from this technology transfer project.

Quantification of myocardial blood flow with 82Rb positron emission tomography: clinical validation with 15O-water.

PURPOSE: Quantification of myocardial blood flow (MBF) with generator-produced (82)Rb is an attractive alternative for centres without an on-site cyclotron. Our aim was to validate (82)Rb-measured MBF in relation to that measured using (15)O-water, as a tracer 100% of which can be extracted from the circulation even at high flow rates, in healthy control subject and patients with mild coronary artery disease (CAD). METHODS: MBF was measured at rest and during adenosine-induced hyperaemia with (82)Rb and (15)O-water PET in 33 participants (22 control subjects, aged 30 ± 13 years; 11 CAD patients without transmural infarction, aged 60 ± 13 years). A one-tissue compartment (82)Rb model with ventricular spillover correction was used. The (82)Rb flow-dependent extraction rate was derived from (15)O-water measurements in a subset of 11 control subjects. Myocardial flow reserve (MFR) was defined as the hyperaemic/rest MBF. Pearson's correlation r, Bland-Altman 95% limits of agreement (LoA), and Lin's concordance correlation ρ (c) (measuring both precision and accuracy) were used. RESULTS: Over the entire MBF range (0.66-4.7 ml/min/g), concordance was excellent for MBF (r = 0.90, [(82)Rb-(15)O-water] mean difference ± SD = 0.04 ± 0.66 ml/min/g, LoA = -1.26 to 1.33 ml/min/g, ρ(c) = 0.88) and MFR (range 1.79-5.81, r = 0.83, mean difference = 0.14 ± 0.58, LoA = -0.99 to 1.28, ρ(c) = 0.82). Hyperaemic MBF was reduced in CAD patients compared with the subset of 11 control subjects (2.53 ± 0.74 vs. 3.62 ± 0.68 ml/min/g, p = 0.002, for (15)O-water; 2.53 ± 1.01 vs. 3.82 ± 1.21 ml/min/g, p = 0.013, for (82)Rb) and this was paralleled by a lower MFR (2.65 ± 0.62 vs. 3.79 ± 0.98, p = 0.004, for (15)O-water; 2.85 ± 0.91 vs. 3.88 ± 0.91, p = 0.012, for (82)Rb). Myocardial perfusion was homogeneous in 1,114 of 1,122 segments (99.3%) and there were no differences in MBF among the coronary artery territories (p > 0.31). CONCLUSION: Quantification of MBF with (82)Rb with a newly derived correction for the nonlinear extraction function was validated against MBF measured using (15)O-water in control subjects and patients with mild CAD, where it was found to be accurate at high flow rates. (82)Rb-derived MBF estimates seem robust for clinical research, advancing a step further towards its implementation in clinical routine.

Limitations of stimulated echo acquisition mode (STEAM) techniques in cardiac applications.

Stimulated echoes are widely used for imaging functional tissue parameters such as diffusion coefficient, perfusion, and flow rates. They are potentially interesting for the assessment of various cardiac functions. However, severe limitations of the stimulated echo acquisition mode occur, which are related to the special dynamic properties of the beating heart and flowing blood. To the well-known signal decay due to longitudinal relaxation and through-plane motion between the preparation and the read-out period of the stimulated echoes, additional signal loss is often observed. As the prepared magnetization is fixed with respect to the tissue, this signal loss is caused by the tissue deformation during the cardiac cycle, which leads to a modification of the modulation frequency of the magnetization. These effects are theoretically derived and corroborated by phantom and in vivo experiments.

Anomalous rainfall and associated atmospheric circulation in the northeast Spanish Mediterranean area and its relationship to sediment fluidization events in a lake

Changes in the dynamics of sediment transport in a Mediterranean lake (sediment fluidization events) are linked to atmospheric circulations patterns (trough monthly precipitation). In the basins of Lake Banyoles, located in the northeast of Spain, water enters mainly through subterranean springs, and associated fluctuations in the vertical migration of sediment distribution (fluidization events) present episodic behavior as a result of episodic rainfall in the area. The initiation of the fluidization events takes place when the monthly rainfall is ∼2.7 times greater than the mean monthly rainfall of the rainiest months in the area, especially in spring (April and May), October, and December. The duration of these events is found to be well correlated with the accumulated rainfall of the preceding 10 months before the process initiation. The rainfall, in turn, is mainly associated with six atmospheric circulation patterns among the 19 fundamental circulations that emerged in an earlier study focused on significant rainfall days in Mediterranean Spain. Among them, accentuated surface lows over the northeast of Spain, general northeasterly winds by low pressure centered to the east of Balearic Islands and short baroclinic waves over the Iberian Peninsula, with easterly flows over the northeastern coast of Spain, are found the most relevant atmospheric circulations that drive heavy rainfall events

Circum-Alpine marine circulation and paleoenvironmental conditions during the Miocene

Trace element and isotopic compositions of marine fossils and sediment were analyzed from several Miocene deposits in the circum-Alpine region in order to reconstruct the paleoceanographic and paleoclimatic changes related to sea level changes, basin evolution and Alpine orogeny. To the north and the east the Alps were border by an epicontinental sea, the Paratethys, while to the south the Mediterranean surrounded the uplifting mountains during the Miocene. The thesis mainly focused on sediments and fossils sampled from Miocene beds of these two oceanic provinces. The north Alpine Molasse, the Vienna and Pannonian Basins were located in the Western and Central Paratethys. O-isotope compositions of well-preserved phosphatic fossils in these sediments support deposition under sub-tropical to warm-temperate climate with water temperatures between 14 to 28 °C for the Miocene. δ18O values of fossil shark teeth from different horizons vary similarly to those of the global trend until the end of the Badenian, however the δ18O values show wider range, which indicates local effects iii the sub-basins. The trend of 87Sr/86Sr in the samples roughly agrees with an open ocean environment for the Miocene. Yet a number of samples deviate from typical open ocean compositions with higher ratios suggesting modification of seawater by local and old terrestrial sources. In contrast, two exceptional teeth from the locality of La Moliere have extremely low δ18O values and low 87Sr/86Sr. However, the REE patterns of their enameloid are similar to those of teeth having O and Sr isotopic compositions typical of a marine setting at this site. Collectively, this suggests that the two teeth formed while the sharks frequented a freshwater environment with very low 18O-content and 87Sr/86Sr controlled by Mesozoic calcareous rocks. This is consistent with a paleogeography of high-elevation (~2300m) Miocene Alps adjacent to a marginal sea. The local effects are also reflected in the εNd values of the Paratethyan fossils, which is compatible with input from ancient crystalline rocks and Mesozoic sediments, while other samples with elevated εNd values indicate an influence of Neogene volcanism on the water budget. Excluding samples whose isotopic compositions reflect a local influence on the water column, an average εNd value of -7.9 ± 0.5 may be inferred for the Paratethys seawater. This value is indistinguishable from the Miocene value of the Indian Ocean, supporting a dominant role of ludo-Pacific water masses in the Paratethys. Regarding the Mediterranean, stable C-and O-isotope compositions of benthic and planktonic foraminifera from the Umbria-Marche region (UMC) have an offset typical for their habitats and the changes in composition mimic global changes, suggesting that the regional conditions of climate and the carbon cycle were controlled by global changes. The radiogenic isotope compositions of the fossil assemblages allow for distinction of periods. From 25 to 19 Ma, high εNd values and low 87Sr/86Sr of sediments and fossils support intense tectonism and volcanism, related to the opening of the western Mediterranean. Between 19 and 13 Ma the Mediterranean has εNd values that are largely controlled by incursion of Indian Ocean water. Brief periods of local hinterland control on seawater compositions are indicated by spikes in the εNd record, coinciding with volcanic events and a short sea-level decrease at about 15.2 Ma. Lower 87Sr/86Sr compared to the open ocean is compatible with rapid uplift of the hinterland and intense influx of Sr from Mesozoic carbonates of the western Apennines, while higher 87Sr/86Sr for other sites indicates erosion of old crustal silicate rocks. Finally, from 13 to 7 Ma the fossils have 87Sr/86Sr similar to those of Miocene seawater and their εNd values indicates fluctuating influence of Atlantic, and Indian Ocean or Paratethys sources of seawater entering the Mediterranean, driven by global sealevel changes and local tectonism. RÉSUMÉ DE LA THÈSE Les compositions en éléments traces et isotopiques de fossiles marins et de sédiments on été analysées à partir de nombreux dépôts marins dans la région circum Alpine dans le but de reconstruire les changements paléocéanographiques et paléoclimatiques liés aux changements du niveau marin, à l'évolution en bassins et à l'orogénie alpine. Au nord et à l'est des Alpes, une mer épicontinentale appelée Paratéthys s'est ouverte, alors que plus au sud la mer Méditerranée bordait au Miocène les Alpes naissantes. Le but de cette recherche est de se concentrer sur les sédiments et les fossiles provenant des couches du Miocènes de ces deux provinces marines. Les bassins de la Molasse Alpine du nord, de Vienne et Pannonien étaient situés au niveau de la Paratéthys Occidentale et Centrale. Les compositions isotopiques de l'oxygène de fossiles phosphatés bien préservés dans ces sédiments étayent la théorie d'un dépôt sous un climat subtropical à tempéré chaud avec des températures entre 14 et 28°C pendant le Miocène. Les valeurs δ18O des fossiles sont similaires à la tendance globale jusqu'à la fin du Badénien. Cependant les larges fluctuations en δ18O indiquent des effets locaux au niveau des sous bassins. En outre, deux dents de requin exceptionnelles présentent des valeurs extrêmement basses de δ18O. Ces données suggèrent que ces deux dents se sont formées alors que les requins fréquentaient un environnement d'eau douce avec de faibles valeurs de 18O. Le calcul de la composition isotopique de l'oxygène de cette eau douce permet d'obtenir une estimation de la paléoélévatian moyenne des Alpes du Miocène (~2300m). La tendance 87Sr/86Sr pour ces échantillons concorde approximativement avec un environnement d'océan ouvert au cours du Miocène. Toutefois un nombre d'échantillons dévie des compositions d'océan ouvert typiques, avec des rapports élevés suggérant des modifications de l'eau de mer par des sources locales et terrestres. Les effets locaux sont aussi reflétés au niveau des valeurs en εNd des fossiles paratéthysiens. Ceci est cohérent avec un apport d'anciennes roches cristallines et de sédiments mésozoïques, tandis que d'autres échantillons avec des valeurs hautes de εNd indiquent une influence d'un volcanisme néogène dans le budget marin. En excluant les échantillons dont les compositions isotopiques confirment une influence locale, une valeur moyenne de εNd de 7.9 t 0.5 peut être déduite pour l'eau de la Parathétys. Cette valeur est semblable à la valeur correspondant à l'Océan Indien durant le Miocène, confirmant un rôle dominant de cet océan dans la Paratéthys. Au niveau de la Méditerranée, les compositions en isotopes stables du Carbone et de l'Oxygène de foraminifères planctoniques et benthique de la région Umbria-Marche présentent un offset typique à leurs habitats. De plus les changements dans leurs compositions suivent les changements globaux, suggérant ainsi que les conditions climatiques régionales et le cycle du carbone étaient contrôlés par des phénomènes globaux. La composition en isotopes radiogéniques d'assemblages fossiles permet une reconnaissance sur trois périodes distinctes. De 25 à 19 millions d'années (Ma), des valeurs élevées de εNd et un faible rapport 87Sr/86Sr dans les sédiments soutiennent l'idée d'une activité tectonique et volcanique intense, liée à l'ouverture de la Méditerranée occidentale. Entre 19 et 13 Ma, la Méditerranée montre des valeurs de εNd qui sont largement contrôlées par une incursion d'eau provenant de l'Océan Indien. En effet, aux alentours de 15,2 Ma, des pics dans l'enregistrement des valeurs de εNd, coïncidant avec des événements volcaniques et de brèves diminutions du niveau marin. Enfin, de 13 à 7 Ma, les fossiles ont des rapports ß7Sr/8fiSr similaires à ceux de l'eau de mer au Miocène. Leurs valeurs de εNd indiquent une influence changeante de l'océan Atlantique, et de l'océan Indien ou des sources d'eau de merde la Parathétys qui entrent dans les bassins méditerranéens. Ce changement est guidé par des modifications globales du niveau marin et par la tectonique locale. RÉSUMÉ DE LA THÈSE (POUR LE GRAND PUBLIC) Les analyses des compositions en éléments traces et isotopiques des fossiles marins sont un outil très utile pour reconstruire les conditions océaniques et climatiques anciennes. Ce travail de thèse se concentre sur les sédiments déposés dans un environnement marin proches des Alpes au cours du Miocène, entre 23 et 7 millions d'années (Ma). Cette période est caractérisée par une tectonique alpine active, ainsi que par des changements climatiques et océanographiques globaux importants. Dans le but de tracer ces changements, les compositions isotopiques du Strontium, du Néodyme, de l'Oxygène et du Carbone ont été analysées dans des fossiles bien préservés ainsi que les sédiments contemporains. Les échantillons proviennent de deux provinces océaniques distinctes, la première est la Mer Méditerranée, et l'autre est une mer épicontinentale appelée Parathétys, qui existait au nord et à l'est des Alpes durant le Miocène. Au niveau de la Parathétys Occidentale et Orientale, les compositions isotopiques d'oxygène de dents de requins confirment un dépôt sous un climat subtropical à tempéré chaud avec des températures d'eau entre 14 et 28°C au Miocène. En outre, deux dents de requins exceptionnelles ont enregistré des compositions isotopiques d'oxygène extrêmement basses. Cela suggère que ces deux dents se sont formées alors que les requins entraient dans un système d'eau douce. Le calcul de la composition isotopique de l'oxygène de cette eau douce permet d'obtenir une estimation de la paléoélévation des Alpes au Miocène qui est aussi élevée que celle d'aujourd'hui. La tendance isotopique du Strontium pour ces échantillons concorde approximativement avec un environnement d'océan ouvert. Cependant un certain nombre d'échantillons indique des modifications de l'eau de mer par des sources terrestres locales. Les effets locaux sont aussi visibles au niveau des compositions isotopiques du Néodyme, qui sont en accord avec un apport provenant de roches cristallines anciennes et de sédiments du Mésozoïque, alors que d'autres échantillons indiquent une influence volcanique néogène dans le budget marin. A l'exclusion des échantillons dont les compositions correspondent à une influence locale, les compositions isotopiques du Néodyme de la Parathétys sont très similaires aux valeurs de l'Océan Indien, montrant ainsi un rôle important des masses d'eau IndoPacifiques dans cette région. Au niveau de la Méditerranée, les compositions en isotopes stables du Carbone et de l'Oxygène de foraminifères planctoniques et benthique de la région Umbria-Marche présentent un offset typique à leurs habitats. De plus, les changements dans leurs compositions suivent les changements globaux, suggérant ainsi que les conditions climatiques régionales et le cycle du carbone étaient contrôlés par des phénomènes globaux. La composition en isotopes radiogéniques d'assemblages fossiles permet une reconnaissance sur trois périodes distinctes. De 25 à 19 Ma, des rapport isotopiques élevés pour le Néodyme et faibles pour le Strontium dans les sédiments et les fossiles soutiennent l'idée d'une activité tectonique et volcanique intense, liée à l'ouverture de la Méditerranée occidentale. Entre 19 et 13 Ma, la Méditerranée présente des rapports isotopiques du Néodyme qui sont largement contrôlés par une incursion d'eau provenant de l'Océan Indien. En effet, aux alentours de 15,2 Ma, des pics dans l'enregistrement des valeurs des isotopes du Néodyme coïncident avec des événements volcaniques et de brèves diminutions du niveau marin. Finalement, de 13 à 7 Ma, les fossiles ont des rapports isotope Strontium similaires à ceux de l'eau de mer au Miocène. Les rapports isotopiques du Néodyme indiquent une influence changeante de l'océan Atlantique, et de l'océan Indien ou des sources d'eau de mer de la Parathétys qui entrent dans les bassins méditerranéens. Ce changement est guidé par des modifications globales du niveau marin et par la tectonique locale.

Mixing of Rhône River water in Lake Geneva (Switzerland-France) inferred from stable hydrogen and oxygen isotope profiles

Depth profiles were sampled at different locations throughout Lake Geneva on a monthly and seasonal basis over the course of 2 years and analysed for their stable hydrogen and oxygen isotope compositions. The isotopic compositions indicate an isotopic stratification in the metalimnion during summer and fall. This is related to mixing of Rhône River water, which in summer is dominated by snow and glacier melt waters, and lake water, with the latter having a homogenous isotopic composition. The observed interflow layer is 7-15 m thick and can be traced by the distinct stable isotope composition of the water for about 55 km throughout the lake as well as into shallow bay regions. Depth of the interflow layer close to the Rhône River mouth is similar to those previously described based on echo-soundings and turbidity profiles of sediment dispersion. In contrast to previous descriptions of the interflow within Lake Geneva, the stable isotope compositions allow for direct, natural tracing of the Rhône River water even in cases where the turbidity and conductivity measurements do not indicate such an interflow. In addition, the method allows for a quantification of the Rhône River and lake water in the interflow with the fraction of Rhône River water within the interflow estimated to be up to 37% in summer. The isotopic composition further indicates different vertical mixing processes within the two lake basins of Lake Geneva, related to the density gradients and local stability within the water column. The method may be applicable to other lakes in catchments with large differences in the topography as water that originates from high altitudes or glaciers has a distinct oxygen and hydrogen isotope composition compared to other sources of water originating at lower altitudes and/or from direct precipitation over the lake. Stable isotope measurements thus improve the understanding of the circulation of water within the lake, which is fundamental for an evaluation of the water residence times, dissolved pollutant and nutrient transport as well as oxygenation.

Revisiting sodium and water reabsorption with functional genomics tools.

PURPOSE OF REVIEW: The kidney plays an essential role in maintaining sodium and water balance, thereby controlling the volume and osmolarity of the extracellular body fluids, the blood volume and the blood pressure. The final adjustment of sodium and water reabsorption in the kidney takes place in cells of the distal part of the nephron in which a set of apical and basolateral transporters participate in vectorial sodium and water transport from the tubular lumen to the interstitium and, finally, to the general circulation. According to a current model, the activity and/or cell-surface expression of these transporters is/are under the control of a gene network composed of the hormonally regulated, as well as constitutively expressed, genes. It is proposed that this gene network may include new candidate genes for salt- and water-losing syndromes and for salt-sensitive hypertension. A new generation of functional genomics techniques have recently been applied to the characterization of this gene network. The purpose of this review is to summarize these studies and to discuss the potential of the different techniques for characterization of the renal transcriptome. RECENT FINDINGS: Recently, DNA microarrays and serial analysis of gene expression have been applied to characterize the kidney transcriptome in different in-vivo and in-vitro models. In these studies, a set of new interesting genes potentially involved in the regulation of sodium and water reabsorption by the kidney have been identified and are currently under detailed investigation. SUMMARY: Characterization of the kidney transcriptome is greatly expanding our knowledge of the gene networks involved in multiple kidney functions, including the maintenance of sodium and water homeostasis.

Vaneri- ja kertopuutehtaiden kuivatuskoneiden lämmöntalteenottojen järjestelmäselvitys

Vanerin tai kertopuun valmistusprosessissaviilun kuivaukseen käytetään suurin osa koko valmistusprosessin primäärienergiasta. Viilunkuivauskoneessa viilun sisältämä vesi siirretään tyypillisesti prosessihöyryllä lämmitettyyn viilunkuivaajan kiertoilmaan höyrystämällä ja poistetaanviilunkuivaajasta poistoilman mukana. Viilunkuivaajan poistoilma on lämmintä jaerittäin suuren kosteuspitoisuutensa takia sisältää runsaasti energiaa. Tyypillisellä viilunkuivaajalla poistoilmaan sitoutunut lämpöteho vaihtelee prosessiolosuhteista riippuen välillä 2,7-5,7 MW. Diplomityössä tutkittiin viilunkuivaajan poistoilman sisältämän lämmön talteenottoa laitteistolla, johon kuuluu lämmöntalteenottopesuri, jossa poistoilmalla lämmitetään tuotantolaitoksen tukkipuun hautomon kiertovettä sekä ilma-ilma-lämmönsiirrin, jolla lämmitetään pesurista poistuvan ilman jäännöslämmöllä ulkoilmaa tehdassalin tuloilmakäyttöön. Työn tavoitteena oli kehittää lämmöntalteenottojärjestelmän suunnittelua, mitoitusta ja ajotapoja. Työssä analysoitiin teoreettisesti pesuria ja ilmalämmönsiirrintä, kehitettiin lämmöntalteenottopesurin simulointimenetelmä ja mitattiin toiminnassa olevia talteenottolaitteistoja. Tutkimuksessa todettiin lämmöntalteenottohyötysuhteen vaihtelevan lämmityskaudella välillä 50-70 %. Lämmöntalteenottolaitteiston pesurin veteen saatava teho riippuu ensisijaisesti viilunkuivaajan poistoilman lämpösisällöstä, joka on enimmäkseen kosteusriippuvainen ja ilmanvaihtoilmaan saatava teho ulkolämpö-tilan määräämästä tehontarpeesta. Pesurin vesijärjestelmän vaikutusmekanismit pesurin suorituskykyyn tunnistettiin ja niiden pohjalta annetaan suositukset mitoitukseen ja ajotapaan. Lämmöntalteenottolaitteiston lämpötehon tasapainottamiseen pesurin ja ilma-ilma-lämmönsiirtimen välillä mitoituksen avulla esitellään työkalut.