The conservation of Balinese traditional architecture: the integration of village pattern and housing pattern in indigenous villages

Bali Island is known not only for its culture and flourish of nature, but it is also for its traditional architecture which is embedded by the traditional philosophies including Tri Hita Karana, Tri Angga, Tri Loka etc. The Indigenous villages, as rural settlements, disclose their Indigenous traditions and values of Balinese culture and architecture which have been inherited from generation to generation. Many scholars have documented the Indigenous villages of Bali in relation to the nature, socio-culture, norms, as well as its architecture. In this paper, through an extensive literature review, and the use of observation, interview and documentation of extant Indigenous villages in Bali, the author explores how the village pattern is relational to the housing pattern in the Indigenous villages in Bali within the landscape that is Bali Island.

The role of clouds in improving the regression model for hourly values of diffuse solar radiation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Traditional and novel methods for occlusal caries detection: Performance on primary teeth

This study aimed to assess the performance of International Caries Detection and Assessment System (ICDAS), radiographic examination, and fluorescence-based methods for detecting occlusal caries in primary teeth. One occlusal site on each of 79 primary molars was assessed twice by two examiners using ICDAS, bitewing radiography (BW), DIAGNOdent 2095 (LF), DIAGNOdent 2190 (LFpen), and VistaProof fluorescence camera (FC). The teeth were histologically prepared and assessed for caries extent. Optimal cutoff limits were calculated for LF, LFpen, and FC. At the D 1 threshold (enamel and dentin lesions), ICDAS and FC presented higher sensitivity values (0.75 and 0.73, respectively), while BW showed higher specificity (1.00). At the D 2 threshold (inner enamel and dentin lesions), ICDAS presented higher sensitivity (0.83) and statistically significantly lower specificity (0.70). At the D 3 threshold (dentin lesions), LFpen and FC showed higher sensitivity (1.00 and 0.91, respectively), while higher specificity was presented by FC (0.95), ICDAS (0.94), BW (0.94), and LF (0.92). The area under the receiver operating characteristic (ROC) curve (Az) varied from 0.780 (BW) to 0.941 (LF). Spearman correlation coefficients with histology were 0.72 (ICDAS), 0.64 (BW), 0.71 (LF), 0.65 (LFpen), and 0.74 (FC). Inter- and intraexaminer intraclass correlation values varied from 0.772 to 0.963 and unweighted kappa values ranged from 0.462 to 0.750. In conclusion, ICDAS and FC exhibited better accuracy in detecting enamel and dentin caries lesions, whereas ICDAS, LF, LFpen, and FC were more appropriate for detecting dentin lesions on occlusal surfaces in primary teeth, with no statistically significant difference among them. All methods presented good to excellent reproducibility. © 2012 Springer-Verlag London Ltd.

Influence of Agroforestry and Traditional Management of Maize (Zea mays L.) on Soil Fertility

The aim of the work was to evaluate soil nutrient concentration at 0-5, 5-10, and 10-20 cm in maize (Zea mays L.) grown in sequence with black oats (Avena strigosa Schreb.) under Leucaena diversifolia alley cropping agroforestry system (AFS) and traditional management system/sole crop (without trees-TS), following a randomized block design. The experiment was carried out at the Brazilian Association of Biodynamic Agriculture, in Botucatu, São Paulo, Brazil. The treatments were: control (C), chemical fertilizer (F), biomass of L. diversifolia alley cropping (B), and biomass of L. diversifolia alley cropping + chemical fertilizer (B+F). After 2 yr, it was observed that pH, organic matter, and nutrient content had a tendency to show higher values in the treatments biomass+fertilizer, biomass, and fertilizer application, in both systems. Higher values in pH, organic matter, phosphorus, potassium, calcium, magnesium, sum of bases, cation exchange capacity, percentage base saturation, boron, copper, and manganese tended to occur in the agroforestry system. © 2013 Copyright Taylor and Francis Group, LLC.

Productivity, Leaf Nutrient Content and Soil Carbon Stocked in Agroforestry and Traditional Management of Maize (Zea mays L.)

The aim of the work was to evaluate the productivity, leaf nutrient content and soil nutrient concentration in maize (Zea mays L.) grown in sequence with black oats (Avena strigosa Schreb.) under Leucaena diversifolia alley cropping agroforestry system (AFS) and traditional management system/sole crop (without trees-TS), after two years of cultivation following a randomized block design. The experiment was carried out in the Brazilian Association of Biodynamic Agriculture, in Botucatu—S?o Paulo, Brazil. Treatments were: control (C), chemical fertilizer application (F), biomass of L. diversifolia alley cropping application (B), biomass of L. diversifolia alley cropping + chemical fertilizer application (B + F). In the second year of management it was observed that black oat yield was higher in treatments B + F and F with significant difference in relation to the others treatments in both systems, followed by treatment B. Between systems, only treatment B showed significant difference, with higher yield value corresponding to AFS, reflecting the efficiency of AFS to promote soil fertility. Maize production presented the second year of cultivation an increasing trend in all treatments in both production systems. This result may be due to the cumulative effect of mineralization and maize straw and oats, along the experiment. How productivity was higher in the AFS system, could also be occurring effect of biological nitrogen fixation, water retention and reduction of extreme microclimate through the rows of L. diversifolia. Comparing the AFS and TS, it was observed that the concentration of N in leaf tissue was higher in the AFS treatments, probably due to nitrogen fixation performed through the rows of L. diversifolia, that is a nitrogen fixing tree species. After two years, carbon stocked in soil show higher values in the treatments biomass + fertilizer and biomass application, in both systems, AFS and TS.

The role of clouds in improving the regression model for hourly values of diffuse solar radiation

The study introduces a new regression model developed to estimate the hourly values of diffuse solar radiation at the surface. The model is based on the clearness index and diffuse fraction relationship, and includes the effects of cloud (cloudiness and cloud type), traditional meteorological variables (air temperature, relative humidity and atmospheric pressure observed at the surface) and air pollution (concentration of particulate matter observed at the surface). The new model is capable of predicting hourly values of diffuse solar radiation better than the previously developed ones (R-2 = 0.93 and RMSE = 0.085). A simple version with a large applicability is proposed that takes into consideration cloud effects only (cloudiness and cloud height) and shows a R-2 = 0.92. (C) 2011 Elsevier Ltd. All rights reserved.

Safety factors in sheet pile wall design: considerations by using traditional methods and FEM analysis

The purpose of the work is: define and calculate a factor of collapse related to traditional method to design sheet pile walls. Furthermore, we tried to find the parameters that most influence a finite element model representative of this problem. The text is structured in this way: from chapter 1 to 5, we analyzed a series of arguments which are usefull to understanding the problem, while the considerations mainly related to the purpose of the text are reported in the chapters from 6 to 10. In the first part of the document the following arguments are shown: what is a sheet pile wall, what are the codes to be followed for the design of these structures and what they say, how can be formulated a mathematical model of the soil, some fundamentals of finite element analysis, and finally, what are the traditional methods that support the design of sheet pile walls. In the chapter 6 we performed a parametric analysis, giving an answer to the second part of the purpose of the work. Comparing the results from a laboratory test for a cantilever sheet pile wall in a sandy soil, with those provided by a finite element model of the same problem, we concluded that:in modelling a sandy soil we should pay attention to the value of cohesion that we insert in the model (some programs, like Abaqus, don’t accept a null value for this parameter), friction angle and elastic modulus of the soil, they influence significantly the behavior of the system (structure-soil), others parameters, like the dilatancy angle or the Poisson’s ratio, they don’t seem influence it. The logical path that we followed in the second part of the text is reported here. We analyzed two different structures, the first is able to support an excavation of 4 m, while the second an excavation of 7 m. Both structures are first designed by using the traditional method, then these structures are implemented in a finite element program (Abaqus), and they are pushed to collapse by decreasing the friction angle of the soil. The factor of collapse is the ratio between tangents of the initial friction angle and of the friction angle at collapse. At the end, we performed a more detailed analysis of the first structure, observing that, the value of the factor of collapse is influenced by a wide range of parameters including: the value of the coefficients assumed in the traditional method and by the relative stiffness of the structure-soil system. In the majority of cases, we found that the value of the factor of collapse is between and 1.25 and 2. With some considerations, reported in the text, we can compare the values so far found, with the value of the safety factor proposed by the code (linked to the friction angle of the soil).

Intellectual Property and Traditional Cultural Expressions in a Digital Environment

In the face of increasing globalisation, and a collision between global communication systems and local traditions, this book offers innovative trans-disciplinary analyses of the value of traditional cultural expressions (TCE) and suggests appropriate protection mechanisms for them. It combines approaches from history, philosophy, anthropology, sociology and law, and charts previously untravelled paths for developing new policy tools and legal designs that go beyond conventional copyright models. Its authors extend their reflections to a consideration of the specific features of the digital environment, which, despite enhancing the risks of misappropriation of traditional knowledge and creativity, may equally offer new opportunities for revitalising indigenous peoples' values and provide for the sustainability of TCE.This book will appeal to scholars interested in multidisciplinary analyses of the fragmentation of international law in the field of intellectual property and traditional cultural expressions. It will also be valuable reading for those working on broader governance and human rights issues.

Scoping Electronic Communication Privacy Rules: Data, Services and Values

We use electronic communication networks for more than simply traditional telecommunications: we access the news, buy goods online, file our taxes, contribute to public debate, and more. As a result, a wider array of privacy interests is implicated for users of electronic communications networks and services. . This development calls into question the scope of electronic communications privacy rules. This paper analyses the scope of these rules, taking into account the rationale and the historic background of the European electronic communications privacy framework. We develop a framework for analysing the scope of electronic communications privacy rules using three approaches: (i) a service-centric approach, (ii) a data-centric approach, and (iii) a value-centric approach. We discuss the strengths and weaknesses of each approach. The current e-Privacy Directive contains a complex blend of the three approaches, which does not seem to be based on a thorough analysis of their strengths and weaknesses. The upcoming review of the directive announced by the European Commission provides an opportunity to improve the scoping of the rules.

Traditional and novel methods for occlusal caries detection: performance on primary teeth

This study aimed to assess the performance of International Caries Detection and Assessment System (ICDAS), radiographic examination, and fluorescence-based methods for detecting occlusal caries in primary teeth. One occlusal site on each of 79 primary molars was assessed twice by two examiners using ICDAS, bitewing radiography (BW), DIAGNOdent 2095 (LF), DIAGNOdent 2190 (LFpen), and VistaProof fluorescence camera (FC). The teeth were histologically prepared and assessed for caries extent. Optimal cutoff limits were calculated for LF, LFpen, and FC. At the D (1) threshold (enamel and dentin lesions), ICDAS and FC presented higher sensitivity values (0.75 and 0.73, respectively), while BW showed higher specificity (1.00). At the D (2) threshold (inner enamel and dentin lesions), ICDAS presented higher sensitivity (0.83) and statistically significantly lower specificity (0.70). At the D(3) threshold (dentin lesions), LFpen and FC showed higher sensitivity (1.00 and 0.91, respectively), while higher specificity was presented by FC (0.95), ICDAS (0.94), BW (0.94), and LF (0.92). The area under the receiver operating characteristic (ROC) curve (Az) varied from 0.780 (BW) to 0.941 (LF). Spearman correlation coefficients with histology were 0.72 (ICDAS), 0.64 (BW), 0.71 (LF), 0.65 (LFpen), and 0.74 (FC). Inter- and intraexaminer intraclass correlation values varied from 0.772 to 0.963 and unweighted kappa values ranged from 0.462 to 0.750. In conclusion, ICDAS and FC exhibited better accuracy in detecting enamel and dentin caries lesions, whereas ICDAS, LF, LFpen, and FC were more appropriate for detecting dentin lesions on occlusal surfaces in primary teeth, with no statistically significant difference among them. All methods presented good to excellent reproducibility.

Development of Values after Compulsory School: Work comes first, then family

During school-to-work transition, adolescents develop values and prioritize what is im-portant in their life. Values are concepts or beliefs about desirable states or behaviors that guide the selection or evaluation of behavior and events, and are ordered by their relative importance (Schwartz & Bilsky, 1987). Stressing the important role of values, career re-search has intensively studied the effect of values on educational decisions and early career development (e.g. Eccles, 2005; Hirschi, 2010; Rimann, Udris, & Weiss, 2000). Few re-searchers, however, have investigated so far how values develop in the early career phase and how value trajectories are influenced by individual characteristics. Values can be oriented towards specific life domains, such as work or family. Work values include intrinsic and extrinsic aspects of work (e.g., self-development, cooperation with others, income) (George & Jones, 1997). Family values include the importance of partner-ship, the creation of an own family and having children (Mayer, Kuramschew, & Trommsdroff, 2009). Research indicates that work values change considerably during early career development (Johnson, 2001; Lindsay & Knox, 1984). Individual differences in work values and value trajectories are found e.g., in relation to gender (Duffy & Sedlacek, 2007), parental background (Loughlin & Barling, 2001), personality (Lowry et al., 2012), educa-tion (Battle, 2003), and the anticipated timing of school-to-work transition (Porfeli, 2007). In contrast to work values, research on family value trajectories is rare and knowledge about the development during the school-to-work transition and early career development is lack-ing. This paper aims at filling this research gap. Focusing on family values and intrinsic work values and we expect a) family and work val-ues to change between ages 16 and 25, and b) that initial levels of family and work values as well as value change to be predicted by gender, reading literacy, ambition, and expected du-ration of education. Method. Using data from 2620 young adults (59.5% females), who participated in the Swiss longitudinal study TREE, latent growth modeling was employed to estimate the initial level and growth rate per year for work and family values. Analyses are based on TREE-waves 1 (year 2001, first year after compulsory school) to 8 (year 2010). Variables in the models included family values and intrinsic work values, gender, reading literacy, ambition and ex-pected duration of education. Language region was included as control variable. Results. Family values did not change significantly over the first four years after leaving compulsory school (mean slope = -.03, p =.36). They increased, however, significantly five years after compulsory school (mean slope = .13, p >.001). Intercept (.23, p < .001), first slope (.02, p < .001), and second slope (.01, p < .001) showed significant variance. Initial levels were higher for men and those with higher ambitions. Increases were found to be steeper for males as well as for participants with lower educational duration expectations and reading skills. Intrinsic work values increased over the first four years (mean slope =.03, p <.05) and showed a tendency to decrease in the years five to ten (mean slope = -.01, p < .10). Intercept (.21, p < .001), first slope (.01, p < .001), and second slope (.01, p < .001) showed signifi-cant variance, meaning that there are individual differences in initial levels and growth rates. Initial levels were higher for females, and those with higher ambitions, expecting longer educational pathways, and having lower reading skills. Growth rates were lower for the first phase and steeper for the second phase for males compared to females. Discussion. In general, results showed different patterns of work and family value trajecto-ries, and different individual factors related to initial levels and development after compul-sory school. Developments seem to fit to major life and career roles: in the first years after compulsory school young adults may be engaged to become established in one's job; later on, raising a family becomes more important. That we found significant gender differences in work and family trajectories may reflect attempts to overcome traditional roles, as over-all, women increase in work values and men increase in family values, resulting in an over-all trend to converge.

Family-related values and future orientation in adolescence: A German-Russian comparison

This article compares family values and family future orientation between German and Russian adolescents. Based on different cultural values in Germany and Russia a higher family orientation of Russian as compared to German adolescents was assumed. Adolescents from both countries responded to a questionnaire of general and family-related values and family-related future orientation in the framework of the VOC-study. Results showed that for both German and Russian adolescents a future family of one's own is of high importance. The majority of adolescents from both countries (and both genders) reported wanting to get married in the future and to have (preferably two) children. Russian as compared to German adolescents reported a higher importance of traditional family values and child-related values (value of children), as well as a stronger desire to have children. Russian girls were most likely to abandon own career plans for the benefit of a future family. The results are discussed with regard to psychological models of cultural values' and the notion of a regaining strength of traditional family values in the course of social change in Germany and Russia.

The changing values of children and preferences regarding family size in south Africa

This study extends the ongoing studies on values of children and intergenerational relations into an African context with the following key questions: To what extent can the structure of values of children (VOC) identified in previous studies be found in South Africa and what are women's preferences regarding the size of small, large, and ideal families? The sample consisted of three cohorts of Black South African women from the Limpopo Province. Factor analyses showed that the dimensions of VOC found in South Africa are a conglomeration of different values. Identified dimensions were Social/Emotional and Traditional/Utilitarian with respect to reasons for wanting children. Regarding reasons for not wanting children, Child as Source of Constraints and Constraints to Have a Child were identified. Intergenerational comparisons showed variations in the importance of value of children dimensions and in preferences regarding family size. Values of children of younger mothers were related to the number of children these women had and to their preferences regarding family size. The findings are discussed within the changing socio-political context of South Africa.

Intellectual Property and Traditional Cultural Expressions in a Digital Environment. Preface

In the face of increasing globalisation, there is a pressing need for innovative trans-disciplinary analyses of the value of traditional cultural expressions (TCE) that also suggest appropriate protection mechanisms for them. The book to which this preface belongs combines approaches from history, philosophy, anthropology, sociology and law, and charts previously untravelled paths for developing new policy tools and legal designs that go beyond conventional copyright models. It reflects also upon the specific features of the digital environment, which, despite enhancing the risks of misappropriation of traditional knowledge and creativity, may equally offer some opportunities for revitalising indigenous peoples' values and provide for the sustainability of TCE.

Osseointegration of titanium implants functionalised with phosphoserine-tethered poly(epsilon-lysine) dendrons: a comparative study with traditional surface treatments in sheep

The aim of this study was to analyse the osseointegrative potential of phosphoserine-tethered dendrons when applied as surface functionalisation molecules on titanium implants in a sheep model after 2 and 8 weeks of implantation. Uncoated and dendron-coated implants were implanted in six sheep. Sandblasted and etched (SE) or porous additive manufactured (AM) implants with and without additional dendron functionalisation (SE-PSD; AM-PSD) were placed in the pelvic bone. Three implants per group were examined histologically and six implants were tested biomechanically. After 2 and 8 weeks the bone-to-implant contact (BIC) total values of SE implants (43.7 ± 12.2; 53.3 ± 9.0 %) and SE-PSD (46.7 ± 4.5; 61.7 ± 4.9 %) as well as AM implants (20.49 ± 5.1; 43.9 ± 9.7 %) and AM-PSD implants (19.7 ± 3.5; 48.3 ± 15.6 %) showed no statistically significant differences. For SE-PSD and AM-PSD a separate analysis of only the cancellous BIC demonstrated a statistically significant difference after 2 and 8 weeks. Biomechanical findings proved the overall increased stability of the porous implants after 8 weeks. Overall, the great effect of implant macro design on osseointegration was further supported by additional phosphoserine-tethered dendrons for SE and AM implants.