997 resultados para suplementação enzimática


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The effect of casein concentration, Ca2+ concentration, temperature and pH on the amount and size of protein aggregates (fines) in the whey produced by enzimic coagulation of nonfat milk was studied in laboratory conditions. Casein concentrations about 0.3 g/L showed a minimal amount of caseins in the whey, with presence of small aggregates of casein micellles. Ca2+ concentrations higher than 5 mM were neccesary to reduce the whey protein to a minimum constituted by protein particles smaller than casein micelles. The coagulation temperature, in the 35 - 45oC range, produced almost no variations in the whey proteins. The obtention of a minimum amount of whey proteins was possible only in a narrow pH range around 6.4. These results pointed to casein concentration and pH as important variables to be controlled in connection with the process yield.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This article describes the current status of several analytical methodologies using vegetal tissue and crude extracts as enzymatic source. In this divulgation paper the obtention of vegetal crude extract and/or tissue and selected enzymatic procedures are presented emphasizing its characteristics and peculiarities. Examples of many biosensors and/or flow injection procedures using vegetal tissues or crude extracts for the determination of many analytes, such as amines, ascorbic acid, ethanol, glutamate, hydrogen peroxide, oxalic acid, pectins, phenolic compounds and urea of biologic, environmental, food, pharmaceutical and industrial interests are also given and discussed.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this work, a spectrophotometric flow injection analysis system using a crude extract of avocado (Persea americana) as a source of polyphenol oxidase to dopamine determination was developed. The substrates and enzyme concentrations from 2.4x10-7 to 5.3x10-4 mol L-1 and 28 to 332 units mL-1 were evaluated, respectively. In addition, the FIA parameters such as sample loop (50 to 500 µL), flow rate (1.4 to 4.3 mL min-1) and reactor length (100 to 500 cm) were also evaluated in a 0.1 mol L-1 phosphate buffer solution (pH 7.0). Dopamine solution concentrations were determined using 277 units mL-1 enzyme solution, 400 mL enzyme loop, 375 µL sample loop, 2.2 mL min-1 flow rate and a reactor of 350 cm. The analytical curve showed a linearity from 5.3x10-5 to 5.3x10-4 mol L-1 dopamine with a detection limit of 1.3x10-5 mol L-1. The analytical frequency was 46 h-1 and the RSD lower than 0.5% for 5.3x10-4 mol L-1 dopamine solution (n=10). A paired t-test showed that all results obtained for dopamine in commercial formulations using the proposed flow injection procedure and a spectrophotometric procedure agree at the 95% confidence level.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This review begins with a brief discussion of the biological importance and chemical features of peptides. A description of the existing synthetic methods follows with emphasis on the basic aspects of the chemical and enzymatic syntheses. Techniques used to purify and characterize the synthesized peptides are also discussed. Finally, a few applications of the final products in chemistry, biochemistry, immunology and medicine are presented, such as identification and quantification of naturally occurring peptides, inspection of structure-activity relationships, therapeutics, development and/or improvement of analytical techniques and search for new vaccines.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The aim of this work was to gain knowledge of enzymatic processes for the synthesis fatty acid esters of sugar, with the objective to develop an enzymatic process for the preparation of non-toxic biodegradable surface-active agents derived entirely from renewable resources. A wide range of data were collected for reaction conditions involving different sugars (glucose, fructose and sucrose), fatty acids (oleic, palmitic, lauric), solvents (hexane, heptane and t-butanol) and different sources of lipases in both free and immobilized forms. As a solvent t-butanol provided the best conditions to create a catalytic liquid phase in which the reaction occurs. Sugars were preferentially esterified in the following order: fructose > glucose > sucrose, depending on the enzyme preparation. For fructose no influence was found concerning de acyl donor and similar rates were achieved for all tested fatty acids. Ester synthesis was maximized for substrates containing fructose, lauric or oleic acids, t-butanol and lipase from porcine pancreas immobilized on polysiloxane-polyvinyl alcohol particles. Under such conditions molar conversions were higher than 50%.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Enzymes are extremely efficient catalysts. Here, part of the mechanisms proposed to explain this catalytic power will be compared to quantitative experimental results and computer simulations. Influence of the enzymatic environment over species along the reaction coordinate will be analysed. Concepts of transition state stabilisation and reactant destabilisation will be confronted. Divided site model and near-attack conformation hypotheses will also be discussed. Molecular interactions such as covalent catalysis, general acid-base catalysis, electrostatics, entropic effects, steric hindrance, quantum and dynamical effects will also be analysed as sources of catalysis. Reaction mechanisms, in particular that catalysed by protein tyrosine phosphatases, illustrate the concepts.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Monoglycerides (MAG) are non-ionic surfactants, widely used in the pharmaceutical, food and cosmetic industries. Although MAGs are manufactured on an industrial scale by chemical glycerolysis of oils and fats, new developments in lipase catalyzed synthesis have been studied as an alternative to the classical method seeking to use clean technology and green chemistry. In this work, different methods such as glycerolysis, selective hydrolysis of fats and oils, and esterification of fatty acids or transesterification of esters with glycerol are presented. The properties and applications of the monoglycerides are also included in this review.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fast, selective, reproducible and reliable detections have been carried out by using enzymatic biosensors in several areas. The enzymatic biosensors based on the inhibition represent an important role in analytical chemistry. Enzymes like cholinesterases, peroxidases, tyrosinases, etc. have been immobilized on electrochemical and optical transducers and the enzymatic activity decreasing in the presence of the inhibitor is related with its concentrations. This article presents a review on the enzymes used on the construction of these sensors, emphasizing the respective applications.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The fish proteins has the advantage of a high sensibility to the hydrolysis and also a balanced composition in aminoacids. The production of protein hydrolyzed from by-products of fish process industry has been receiving more attention on the last years. The aim of this work was to evaluate the production of protein hydrolyzed from Micropogonias furnieri through chemical and enzymatic methods, verifying some functional properties. The results showed that the production of the hydrolyzed improved some functional properties of the proteins found in the filet and in the waste, what is desirable for a subsequent application.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

An enzymatic method was used for obtaining protein extracts from wheat flour using an alkaline protease. Some parameters were evaluated aiming the optimization of this method: temperature (40-50 ºC); time (2-5 h); physical treatment of the sample (no treatment, ultra-turrax/16,000 rpm/5 min and ultrasound/120 W/10 min); enzyme:substrate ratio (E:S) of 5:100 - 10:100 and concentration of wheat flour (1:3, 1:5 and 1:10 w/v). The results showed that the best condition for protein extraction was that using the sample concentration of 1:3 (w/v), ultra-turrax, E:S of 10:100, at 40 ºC, 2 h, having reached an extraction yield of 88.53%.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Monoacilglycerides and diacilglycerides are produced through lipase-catalyzed glycerolysis of soybean oil using Candida antarctica B in a solvent-free system. The reaction was carried out at a glycerol to triacylglycerol molar ratio of 8:1 with 2% of lipase. Acylglycerides, free fatty acids (FFA) and glycerol produced were separated employing the molecular distillation process. Starting from a product of enzymatic reaction 25.06% of triacylglycerols, 46.63% of diacylglycerides, 21.72% of monoacylglycerides, 5.38% of FFA and 1.21% of glycerol and after consecutively distillations, monoacylglycerides with 80% of purity was obtained and also oil with 54% of diacylglycerides to be used in human dietary.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Isoamyl butyrate production was investigated using free and immobilized lipases by esterification of butyric acid with isoamyl alcohol in a solvent-free system and in an organic media. Among the enzymes studied, Lipozyme TL IM was found to be the most active catalyst in n-hexane as a solvent. The effects of different solvents and the amount of water added on conversion rates were studied. A maximum conversion yield of 80% in n-hexano at 48 h was obtained under the following conditions: 3 g L-1 of Lipozyme TL IM, 30 ºC, 180 rpm of agitation, isoamyl alcohol to butyric acid molar ratio of 1:1 and acid substrate concentration of 0.06 M.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Esterification reactions of glycerol with lauric acid in solvent free system were carried out using lipases from several sources. All lipases were immobilized on polysiloxane-polyvinyl alcohol particles by covalent binding with high activity recovered. Among the tested enzymes, the Candida antarctica lipase allowed to attain the highest molar conversion (76%), giving similar proportions of monolaurin, dilaurin and low amount of trilaurin. To further improve the process, the Response Surface Methodology (RSM) was used and optima temperature and molar ratio glycerol to lauric acid were found to be 45 ºC and 5:1, respectively. Under these conditions, 31.35% of monolaurin concentrations were attained and this result was in close agreement with the statistical model prediction.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The aim of this work was to study the enzymatic modification on rice flour using lipase pancreatic and amyloglucosidase to obtain resistant starch. For this, Response Surface Methodology (RSM) was used to determine the best operating conditions for each enzyme. For lypase pancreatic, the highest value for resistant starch (45%) was achieved within 2 h reaction at pH 7 using an enzyme/substrate ratio of 4% (w/w) and Dp= 100/200 tyler. For amyloglucosidase, optima conditions corresponded to an enzyme/substrate ratio of 0,006 mL/g and Dp= 100/200 tyler at 45 ºC, yielding 57% of resistant starch in 2 h reaction. These results show the potential of using both enzymes to modified rice flour, increasing the resistant starch in about 5.7 folds in relation to the flour without treatment (resistant starch=10.6%).

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Poly (3-hydroxybutyrate) (P(3HB)) is a biopolymer, completely biodegradable, which has similar properties to fuel-based polymers. However to make it economically competitive it is necessary the study of cheap sources of substrate. The influence of hydrolyzed rice starch supplemented with soybean oil at different temperatures (30, 35 and 40 °C) was studied in the production of P(3HB) by C. necator. The percentage of P(3HB) produced in the cultures at 30, 35 °C was 30, 39% and 35, 43% without and with supplementation of oil, respectively. The culture at 40 °C showed no production phase due to a possible oxygen limitation. These results demonstrate that hydrolyzed rice starch supplemented with soybean oil increases the yield of P(3HB) and temperature of 35 ºC is the most favorable for biopolymer production.