Tensile fracture characterization of adhesive joints by standard and optical techniques

The use of adhesive joints has increased in recent decades due to its competitive features compared with traditional methods. This work aims to estimate the tensile critical strain energy release rate (GIC) of adhesive joints by the Double-Cantilever Beam (DCB) test. The J-integral is used since it enables obtaining the tensile Cohesive Zone Model (CZM) law. An optical measuring method was developed for assessing the crack tip opening (δn) and adherends rotation (θo). The proposed CZM laws were best approximated by a triangular shape for the brittle adhesive and a trapezoidal shape for the two ductile adhesives.

Integração de Sistemas de Gestão da Qualidade, Ambiente e Segurança

Analisando numa perspectiva mais ampla, esta Tese/Dissertação deverá ser uma ferramenta de apoio a quem necessite de implementar e integrar sistemas de gestão normalizados. Seguindo uma abordagem empresarial, visa ajudar os praticantes de uma filosofia Kaizen, a melhorar continuamente, acrescentando valor às suas organizações, através de um conjunto de estratégias e técnicas de carácter prático. Em termos mais específicos, o objectivo foi apresentar um caso prático onde se aplicassem essas mesmas ferramentas. O case-study incidiu na análise da implementação da certificação integrada da Qualidade, Ambiente e Segurança na Divisão de Equipamento Industrial da Toyota Caetano Portugal. Esta tese/dissertação retrata a implementação teórica e prática do SIG QAS, aplicando os requisitos definidos pela TMHE (Toyota Material Handeling Europe), entre os quais o TPS (Toyota Production System), Kaizen, Toyota Way, Elimination of Waste, Gemba, JIT, Genchi Genbutsu, etc. Os resultados obtidos foram positivos por várias razões. Por ter conseguido elaborar um documento simples de entender, com sugestões de fácil aplicação futura e porque as propostas resultantes do case-study permitirão à TCAP - DEI a promoção da qualidade, a eliminação do desperdício, a completa satisfação dos clientes pela análise, antecipação das suas necessidades e expectativas e pelo cumprimento dos requisitos legais Ambientais e de Segurança aplicáveis, adoptando boas práticas ambientais e de prevenção de acidentes. Temos assim o comprometimento de que esta Tese/Dissertação contribuirá de forma inabalável para o principal desígnio, de assegurar a melhoria contínua do desempenho, garantindo a sustentabilidade da Organização.

Implicações da certificação pela NP 4427:2004 na função recursos humanos

Este estudo tem como principal objetivo compreender as mudanças na função recursos humanos após a certificação do sistema de gestão de recursos humanos de uma empresa no âmbito da Norma Portuguesa 4427:2004 – “Sistemas de gestão de recursos humanos – requisitos”. Neste sentido, foi realizada uma abordagem teórica à evolução da função recursos humanos, apresentada a NP 4427:2004 e a contextualização teórica e normativa das práticas de gestão de recursos humanos desenvolvidas nesse âmbito. De forma a dar resposta à questão de pesquisa foi utilizada uma metodologia qualitativa, com recurso ao estudo de caso único numa empresa portuguesa certificada no âmbito da NP 4427:2004. No processo de recolha de dados recorremos à análise documental e à realização de entrevistas aos treze colaboradores vinculados à empresa desde data anterior à certificação. Os resultados sugerem mudanças ao nível da atuação da gestão de recursos humanos na empresa que, com a implementação e certificação pela NP 4427:2004, se tornou mais estratégica e dinamizadora de práticas de recursos humanos sistematizadas e preocupadas com o desenvolvimento das pessoas. Depois de apresentados e discutidos os resultados, o estudo apresenta também sugestões de pesquisa futura sobre o tema da NP 4427:2004 e contributos práticos da investigação para a empresa objeto de estudo.

Defying Standard Criteria for Digital Replantation: A Case Series

INTRODUCTION: There is much controversy regarding the current indications and contraindications for digital replantation. PRESENTATION OF CASE: Three patients with absolute contraindications for digital replantation according to classical criteria are presented (Case 1: multilevel amputation of the hand and fingers; Case 3: avulsion of the thumb; Case 4: index amputation proximal to the insertion of the flexor digitorum superficialis). In addition a patient with a very distal digital amputation (Case 2), whose indication for replantation is controversial is also presented. In all cases, the patients were replanted and showed good functional and aesthetical results. DISCUSSION: Most authors advocate that the classical indications for replantation have been validated by experience, are predicated on the potential for long-term function, and should be followed in most if not all cases. However, some surgeons have been adopting a more liberal attitude with good results. CONCLUSION: The clinical cases presented in this paper suggest that the standard criteria for digital replantation should not be followed rigidly but instead should be regarded as a general guide.

GVSOS: A New Client for OGC SOS Interface Standard

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Creating a GWT web application for the SOS standard enhanced profile

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Analysis of benefits of the process of certification on international standars: ISO 9001-2008 for Mapfre Assistencia Portugal

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics

The emergence of product certification systems as trade barriers

This paper addresses the growing difficulties automobile manufacturers face within their after sales business: an increasing number of trade obstacles set up by import countries discriminates against the foreign suppliers and impedes the international sales of genuine parts. The purpose of the study is to explore the emergence of trade restrictive product certification systems, which affect spare parts exports of automobile manufacturers. The methodology used includes review of the literature and an empirical study based on qualitative interviews with representatives of major stakeholders of the automotive after sales business. Relevant key drivers, which initiate the introduction of technical regulations in importing countries, are identified and analysed to evaluate their effect on the emerging trade policy. The analysis of the key drivers outlines that several interacting components, such as the global competitiveness of the country, macroeconomic and microeconomic factors, and certain country-specific variables induce trade restrictive product certification systems. The findings allow for an early detection of the emergence of product certification systems and provide a means to early recognise the risks and opportunities for the sales of automotive spare parts in the automakers’ target markets. This allows the manufacturers to react immediately and adapt in time to the upcoming changes.

Comparing standard and low-cost tools for gradient evaluation along potential cycling paths

Promoting the use of non-motorized modes of transport, such as cycling, is an important contribution to the improvement of mobility, accessibility and equity in cities. Cycling offers a fast and cheap transportation option for short distances, helping to lower pollutant emissions and contributing to a healthier way of life. In order to make the cycling mode more competitive in relation to motorized traffic, it is necessary to evaluate the potential of alternatives from the perspective of the physical effort. One way to do so consists of assessing the suitability of locations for implementing cycling infrastructures. In this work, four tools to determine the gradient along potential cycling paths are compared. Furthermore, an evaluation of the reliability of some low-cost tools to measure this parameter was conducted, by comparison with standard measurements using cartographic plans, on a field case study applied to the city of Braga, Portugal. These tools revealed a good level of accuracy for the planning stage, but proved to be less reliable for use in design.

Estudo comparativo entre as normas ISO 21931:2010, NBR 15575 e os requisitos das certificações AQUA e LEED

The construction sector is responsible for generating large environmental impacts in order to minimize these impacts, environmental standards and seals for the construction were created. This article presents a comparative study between the preliminary requirements of ISO 21931: 2010 Sustainable Building, the requirements of AQUA-HQE stamps, LEED and the Performance Standard NBR 15575: 2013. For this, a literature search was conducted to carry out a comparative analysis of the requirements of each of them in order to know those common to all of them. As a result of this work was identified that the standard of performance, the AQUA seal and LEED are well aligned with the sustainability criteria, comfort and health of the user, and has the ISO 21931 standard has some of these items as options.

Search for the Standard Model Higgs boson produced in association with top quarks and decaying into bb in pp collisions at √s = 8 TeV with the ATLAS detector

A search for the Standard Model Higgs boson produced in association with a pair of top quarks, tt¯H, is presented. The analysis uses 20.3 fb−1 of pp collision data at s√ = 8 TeV, collected with the ATLAS detector at the Large Hadron Collider during 2012. The search is designed for the H to bb¯ decay mode and uses events containing one or two electrons or muons. In order to improve the sensitivity of the search, events are categorised according to their jet and b-tagged jet multiplicities. A neural network is used to discriminate between signal and background events, the latter being dominated by tt¯+jets production. In the single-lepton channel, variables calculated using a matrix element method are included as inputs to the neural network to improve discrimination of the irreducible tt¯+bb¯ background. No significant excess of events above the background expectation is found and an observed (expected) limit of 3.4 (2.2) times the Standard Model cross section is obtained at 95% confidence level. The ratio of the measured tt¯H signal cross section to the Standard Model expectation is found to be μ=1.5±1.1 assuming a Higgs boson mass of 125 GeV.

Search for the bb¯ decay of the Standard Model Higgs boson in associated (W/Z)H production with the ATLAS detector

A search for the bb¯ decay of the Standard Model Higgs boson is performed with the ATLAS experiment using the full dataset recorded at the LHC in Run 1. The integrated luminosities used from pp collisions at s√=7 and 8 TeV are 4.7 and 20.3 fb−1, respectively. The processes considered are associated (W/Z)H production, where W→eν/μν, Z→ee/μμ and Z→νν. The observed (expected) deviation from the background-only hypothesis corresponds to a significance of 1.4 (2.6) standard deviations and the ratio of the measured signal yield to the Standard Model expectation is found to be μ=0.52±0.32(stat.)±0.24(syst.) for a Higgs boson mass of 125.36 GeV. The analysis procedure is validated by a measurement of the yield of (W/Z)Z production with Z→bb¯ in the same final states as for the Higgs boson search, from which the ratio of the observed signal yield to the Standard Model expectation is found to be 0.74±0.09(stat.)±0.14(syst.).

Implementação de sistemas de encriptação AES advanced encryption standard em hardware para segurança

Dissertação de mestrado integrado em Engenharia Electrónica Industrial e Computadores

Estudo comparativo entre indicadores de desempenho da JCI e do Contrato Programa Cirurgia Segura

Dissertação de mestrado em Engenharia e Gestão da Qualidade

Validation study of an automated wrist monitor, omron model HEM-608, compared with the standard methods for blood pressure measurement

OBJECTIVE - The aim of our study was to assess the profile of a wrist monitor, the Omron Model HEM-608, compared with the indirect method for blood pressure measurement. METHODS - Our study population consisted of 100 subjects, 29 being normotensive and 71 being hypertensive. Participants had their blood pressure checked 8 times with alternate techniques, 4 by the indirect method and 4 with the Omron wrist monitor. The validation criteria used to test this device were based on the internationally recognized protocols. RESULTS - Our data showed that the Omron HEM-608 reached a classification B for systolic and A for diastolic blood pressure, according to the one protocol. The mean differences between blood pressure values obtained with each of the methods were -2.3 +7.9mmHg for systolic and 0.97+5.5mmHg for diastolic blood pressure. Therefore, we considered this type of device approved according to the criteria selected. CONCLUSION - Our study leads us to conclude that this wrist monitor is not only easy to use, but also produces results very similar to those obtained by the standard indirect method.