Social network structure as a critical success condition for open source software project communities

In recent years, a surprising new phenomenon has emerged in which globally-distributed online communities collaborate to create useful and sophisticated computer software. These open source software groups are comprised of generally unaffiliated individuals and organizations who work in a seemingly chaotic fashion and who participate on a voluntary basis without direct financial incentive. ^ The purpose of this research is to investigate the relationship between the social network structure of these intriguing groups and their level of output and activity, where social network structure is defined as (1) closure or connectedness within the group, (2) bridging ties which extend outside of the group, and (3) leader centrality within the group. Based on well-tested theories of social capital and centrality in teams, propositions were formulated which suggest that social network structures associated with successful open source software project communities will exhibit high levels of bridging and moderate levels of closure and leader centrality. ^ The research setting was the SourceForge hosting organization and a study population of 143 project communities was identified. Independent variables included measures of closure and leader centrality defined over conversational ties, along with measures of bridging defined over membership ties. Dependent variables included source code commits and software releases for community output, and software downloads and project site page views for community activity. A cross-sectional study design was used and archival data were extracted and aggregated for the two-year period following the first release of project software. The resulting compiled variables were analyzed using multiple linear and quadratic regressions, controlling for group size and conversational volume. ^ Contrary to theory-based expectations, the surprising results showed that successful project groups exhibited low levels of closure and that the levels of bridging and leader centrality were not important factors of success. These findings suggest that the creation and use of open source software may represent a fundamentally new socio-technical development process which disrupts the team paradigm and which triggers the need for building new theories of collaborative development. These new theories could point towards the broader application of open source methods for the creation of knowledge-based products other than software. ^

Social Network Structure as a Critical Success Condition for Open Source Software Project Communities

In recent years, a surprising new phenomenon has emerged in which globally-distributed online communities collaborate to create useful and sophisticated computer software. These open source software groups are comprised of generally unaffiliated individuals and organizations who work in a seemingly chaotic fashion and who participate on a voluntary basis without direct financial incentive. The purpose of this research is to investigate the relationship between the social network structure of these intriguing groups and their level of output and activity, where social network structure is defined as 1) closure or connectedness within the group, 2) bridging ties which extend outside of the group, and 3) leader centrality within the group. Based on well-tested theories of social capital and centrality in teams, propositions were formulated which suggest that social network structures associated with successful open source software project communities will exhibit high levels of bridging and moderate levels of closure and leader centrality. The research setting was the SourceForge hosting organization and a study population of 143 project communities was identified. Independent variables included measures of closure and leader centrality defined over conversational ties, along with measures of bridging defined over membership ties. Dependent variables included source code commits and software releases for community output, and software downloads and project site page views for community activity. A cross-sectional study design was used and archival data were extracted and aggregated for the two-year period following the first release of project software. The resulting compiled variables were analyzed using multiple linear and quadratic regressions, controlling for group size and conversational volume. Contrary to theory-based expectations, the surprising results showed that successful project groups exhibited low levels of closure and that the levels of bridging and leader centrality were not important factors of success. These findings suggest that the creation and use of open source software may represent a fundamentally new socio-technical development process which disrupts the team paradigm and which triggers the need for building new theories of collaborative development. These new theories could point towards the broader application of open source methods for the creation of knowledge-based products other than software.

Intelligent DMU creation: Nominal CAD model preparation for automated tolerance allocation

This paper examines the integration of a tolerance design process within the Computer-Aided Design (CAD) environment having identified the potential to create an intelligent Digital Mock-Up [1]. The tolerancing process is complex in nature and as such reliance on Computer-Aided Tolerancing (CAT) software and domain experts can create a disconnect between the design and manufacturing disciplines It is necessary to implement the tolerance design procedure at the earliest opportunity to integrate both disciplines and to reduce workload in tolerance analysis and allocation at critical stages in product development when production is imminent.
The work seeks to develop a methodology that will allow for a preliminary tolerance allocation procedure within CAD. An approach to tolerance allocation based on sensitivity analysis is implemented on a simple assembly to review its contribution to an intelligent DMU. The procedure is developed using Python scripting for CATIA V5, with analysis results aligning with those in literature. A review of its implementation and requirements is presented.

Representing Variability in Software Architecture

Software Architecture is a high level description of a software intensive system that enables architects to have a better intellectual control over the complete system. It is also used as a communication vehicle among the various system stakeholders. Variability in software-intensive systems is the ability of a software artefact (e.g., a system, subsystem, or component) to be extended, customised, or configured for deployment in a specific context. Although variability in software architecture is recognised as a challenge in multiple domains, there has been no formal consensus on how variability should be captured or represented. In this research, we addressed the problem of representing variability in software architecture through a three phase approach. First, we examined existing literature using the Systematic Literature Review (SLR) methodology, which helped us identify the gaps and challenges within the current body of knowledge. Equipped with the findings from the SLR, a set of design principles have been formulated that are used to introduce variability management capabilities to an existing Architecture Description Language (ADL). The chosen ADL was developed within our research group (ALI) and to which we have had complete access. Finally, we evaluated the new version of the ADL produced using two distinct case studies: one from the Information Systems domain, an Asset Management System (AMS); and another from the embedded systems domain, a Wheel Brake System (WBS). This thesis presents the main findings from the three phases of the research work, including a comprehensive study of the state-of-the-art; the complete specification of an ADL that is focused on managing variability; and the lessons learnt from the evaluation work of two distinct real-life case studies.

What Makes a Great Software Engineer

Thesis (Ph.D.)--University of Washington, 2016-06

From Aari to Zulu: Massively Multilingual Creation of Language Tools using Interlinear Glossed Text

Thesis (Ph.D.)--University of Washington, 2016-08

Implementação de software livre na administração pública: um estudo de múltiplos casos no Estado do Rio Grande do Norte

New technologies appear each moment and its use can result in countless benefits for that they directly use and for all the society as well. In this direction, the State also can use the technologies of the information and communication to improve the level of rendering of services to the citizens, to give more quality of life to the society and to optimize the public expense, centering it in the main necessities. For this, it has many research on politics of Electronic Government (e-Gov) and its main effect for the citizen and the society as a whole. This research studies the concept of Electronic Government and wishes to understand the process of implementation of Free Softwares in the agencies of the Direct Administration in the Rio Grande do Norte. Moreover, it deepens the analysis to identify if its implantation results in reduction of cost for the state treasury and intends to identify the Free Software participation in the Administration and the bases of the politics of Electronic Government in this State. Through qualitative interviews with technologies coordinators and managers in 3 State Secretaries it could be raised the ways that come being trod for the Government in order to endow the State with technological capacity. It was perceived that the Rio Grande do Norte still is an immature State in relation to practical of electronic government (e-Gov) and with Free Softwares, where few agencies have factual and viable initiatives in this area. It still lacks of a strategical definition of the paper of Technology and more investments in infrastructure of staff and equipment. One also observed advances as the creation of the normative agency, the CETIC (State Advice of Technology of the Information and Communication), the Managing Plan of Technology that provide a necessary diagnosis with the situation how much Technology in the State and considered diverse goals for the area, the accomplishment of a course of after-graduation for managers of Technology and the training in BrOffice (OppenOffice) for 1120 public servers

Ferramentas Web, Web 2.0 e software livre em EVT: estudo sobre a integração de ferramentas digitais no currículo da disciplina de educação visual e tecnológica

A utilização das TIC ocupam um lugar cada vez mais importante nas nossas escolas, marcado sobretudo pela evolução das tecnologias e pela utilização em contexto educativo de muitas ferramentas da Web 2.0. Esse facto é muito notório na disciplina de Educação Visual e Tecnológica, de carácter eminentemente prático, onde é permitido explorar várias ferramentas digitais para abordagem de conteúdos da disciplina e para a criação de produtos gráficos e plásticos. Com o aparecimento da Web 2.0 e a disponibilização de milhares de novas ferramentas digitais aos utilizadores da Internet, estimula-se um interesse cada vez maior na adoção de metodologias e estratégias com recurso a estes media e que suportem uma aprendizagem mais eficaz e motivadora para os alunos, articulando-se os suportes tradicionais de EVT com os novos media digitais. Neste contexto, o presente estudo é o resultado duma investigação-ação realizada no âmbito do Programa Doutoral em Multimédia em Educação da Universidade de Aveiro onde se implementou a integração de ferramentas da Web, Web 2.0 e Software Livre em contexto educativo na disciplina de EVT, na qual poderiam ser utilizadas tanto as técnicas tradicionais de realização mais usuais na disciplina como a integração e articulação com as ferramentas digitais, suportadas por software livre (e outros de utilização gratuita), a Web e a Web 2.0 para suporte ao ensino e aprendizagem dos diversos conteúdos e áreas de exploração da disciplina. Este estudo, desenhado em três ciclos, envolveu num primeiro momento a constituição de uma comunidade de prática de professores alargada, sendo criadas seis turmas de formação que reuniram um total de 112 professores que pretendiam integrar as ferramentas digitais em EVT. Para além da pesquisa, análise, seleção e catalogação destas 430 ferramentas digitais recenseadas, produziram-se 371 manuais de apoio à utilização das mesmas, sendo estes recursos disponibilizados no espaço do EVTdigital. Num segundo ciclo, decorrente da avaliação realizada, foi criada a distribuição EVTux para simplificar o acesso e utilização das ferramentas digitais em contexto de EVT. Finalmente, o terceiro ciclo, decorre da eliminação da disciplina de EVT do currículo do 2º ciclo do ensino básico e a sua substituição por duas novas disciplinas, tendo-se realizada a respetiva análise de conteúdo das metas curriculares e produzido a aplicação As ferramentas digitais do Mundo Visual, concebida para contextualizar e indexar as ferramentas digitais selecionadas para a nova disciplina de Educação Visual.Os resultados deste estudo apontam claramente para a possibilidade de integrar na disciplina de Educação Visual e Tecnológica (ou no presente momento, em Educação Visual) ferramentas digitais para abordagem aos conteúdos e áreas de exploração, bem como a possibilidade de se constituírem facilmente comunidades de prática (como foi o caso) que possam colaborar na catalogação destas ferramentas no contexto específico da disciplina e para a necessidade sentida pelos professores em obter informação e formação que os possa atualizar quanto à integração das TIC no currículo. Apresentam-se, ainda, as limitações deste estudo que passaram sobretudo pelo impacto negativo que a eliminação da disciplina provocou na motivação dos docentes e a sua consequente participação no decorrer de algumas fases do trabalho, e ainda da dificuldade de gestão de uma equipa de professores colaboradores tão numerosa e diversificada. Nesse sentido, são também apresentadas sugestões para estudos futuros.

Implementação de software livre na administração pública: um estudo de múltiplos casos no Estado do Rio Grande do Norte

New technologies appear each moment and its use can result in countless benefits for that they directly use and for all the society as well. In this direction, the State also can use the technologies of the information and communication to improve the level of rendering of services to the citizens, to give more quality of life to the society and to optimize the public expense, centering it in the main necessities. For this, it has many research on politics of Electronic Government (e-Gov) and its main effect for the citizen and the society as a whole. This research studies the concept of Electronic Government and wishes to understand the process of implementation of Free Softwares in the agencies of the Direct Administration in the Rio Grande do Norte. Moreover, it deepens the analysis to identify if its implantation results in reduction of cost for the state treasury and intends to identify the Free Software participation in the Administration and the bases of the politics of Electronic Government in this State. Through qualitative interviews with technologies coordinators and managers in 3 State Secretaries it could be raised the ways that come being trod for the Government in order to endow the State with technological capacity. It was perceived that the Rio Grande do Norte still is an immature State in relation to practical of electronic government (e-Gov) and with Free Softwares, where few agencies have factual and viable initiatives in this area. It still lacks of a strategical definition of the paper of Technology and more investments in infrastructure of staff and equipment. One also observed advances as the creation of the normative agency, the CETIC (State Advice of Technology of the Information and Communication), the Managing Plan of Technology that provide a necessary diagnosis with the situation how much Technology in the State and considered diverse goals for the area, the accomplishment of a course of after-graduation for managers of Technology and the training in BrOffice (OppenOffice) for 1120 public servers

Corporate governance : value creation and performance in credit unions

In this study, we examine the relationship between good corporate governance practices and the creation of value/performance of credit unions from 2010 to 2012. The objective was to create and validate a corporate governance index for credit unions, and to then analyse the relationship between good governance practices and the creation of value/performance. The problem question is: do good corporate governance practices provide value creation for credit unions? The research started by creating indices from factor analysis to identify latent dependent variables related to value creation and performance; next indices were created from the principal component analysis for the creation of independent latent variables related to corporate governance. Finally, based on panel data from regression models, the influence of the variables and indices related to corporate governance on the indices of value creation and performance was verified. Based on the research, it became evident that the Corporate Governance Index (IGC) is mainly impacted by Executive Management, with 40.31% of the IGC value, followed by the Representation and Participation dimension, with 34.07% of the IGC value. The contribution for academics was the creation of the Corporate Governance Index (IGC) applied for credit unions. As for the contribution to the system of credit unions, the highlight was the effectiveness of the mechanisms for economic-financial and asset management adopted by BACEN, credit unions and OCEMG.