Histomorphometric evaluation of human sinus floor augmentation healing responses to placement of calcium phosphate or Ricinus communis polymer associated with autogenous bone

Background: Prosthetic rehabilitation of the posterior maxilla with dental implants is often difficult because of proximity to the maxillary sinus and insufficient bone height. Maxillary sinus floor augmentation procedures aim to obtain enough bone with an association between biomaterials and autogenous bone.Purpose: the purpose of this study was to evaluate histomorphometrically two grafting materials (calcium phosphate and Ricinus communis polymer) used in maxillary sinus floor augmentation associated with autogenous bone.Materials and Methods: Biopsies were taken from 10 consecutive subjects (mean age 45 years) 10 months after maxillary sinus floor augmentation. The sinus lift was performed with a mixture of autogenous bone and R. communis polymer or calcium phosphate in a 1:2 proportion. Routine histologic processing and staining with hernatoxylin and eosin were performed.Results: the histomorphometric analysis indicated satisfactory regenerative results in both groups for a mean of bone tissue in the grafted area (44.24 +/- 13.79% for the calcium phosphate group and 38.77 +/- 12.85% for the polymer group). Histologic evaluation revealed the presence of an inflammatory infiltrate of mononuclear prevalence that, on average, was nonsignificant. The histologic sections depicted mature bone with compact and cancellous areas in both groups.Conclusion: the results indicated that both graft materials associated with the autogenous bone were biocompatible, although both were still present after 10 months.

Influence of implant surface topography on early osseointegration: A histological study in human jaws

The purpose of this study was to evaluate the influence of the oxidized surface on bone-to-implant contact (BIC%), the bone density in the threaded area (BA %), as well as the bone density outside the threaded area (BD%) in human jaws after 2 months of unloaded healing. Thirteen subjects (mean age 42.61 +/- 6.15 years) received two microimplants (2.5 mm diameter and 6 mm length) each, during conventional mandible or maxilla implant surgery. The microimplants with commercially pure titanium surfaces (machined) and oxidized surfaces served as the control and test surfaces, respectively. After 2 months, the microimplants and the surrounding tissue were removed and prepared for histomorphometric analysis. All microimplants, except two machined and one oxidized microimplant surfaces, were found to be clinically stable after the healing period. Histometric evaluation indicated that the mean BIC % was (21.71 +/- 13.11) % and (39.04 +/- 15.75) % for machined and oxidized microimplant surfaces, respectively. The BD% was higher for the oxidized surface, although there was no difference for maxilla and mandible. The oxidized surface impacted the BA% for the type-IV bone. Data suggest that the oxidized surface presented a higher bone-to-implant contact rate compared with machined surfaces under unloaded conditions, after a healing period of 2 months. (c) 2006 Wiley Periodicals, Inc.

Avaliação das queixas estético-funcionais em pacientes portadores de deformidades dentofaciais

OBJETIVO: avaliar as queixas relatadas por pacientes portadores de deformidades dentofaciais como fatores motivadores na procura do tratamento ortodôntico-cirúrgico. METODOLOGIA: foram verificados 130 prontuários de pacientes em tratamento no CEDEFACE - Araraquara, apresentando um período pós-operatório mínimo de 6 meses e idade média de 30,9 anos. A classificação dos tipos de deformidades foi realizada por meio de análise das telerradiografias e das fotografias, sendo subdivididas em três grupos, de acordo com suas características de perfil facial. As informações referentes às queixas foram colhidas por meio de questionários e divididas em duas categorias: queixa principal e queixas secundárias. em relação à análise estatística, utilizaram-se medidas de tendência central (média e mediana) e de variabilidade (variação e desvio-padrão) para descrever as variáveis numéricas de idade. As variáveis categóricas de gênero, deformidades dentofaciais e queixas foram descritas através da distribuição de freqüências, com nível de significância de 5%. RESULTADOS: observou-se predominância do gênero feminino, na razão de 2:1. Na maioria das vezes, a deformidade requeria tratamento somente na maxila ou somente na mandíbula. No gênero feminino predominaram as deformidades de perfil convexo (46%); no gênero masculino houve predominância de deformidades de perfil côncavo (48,8%). As queixas principais evidenciaram que o anseio estético é predominante, tanto no gênero feminino quanto no masculino. CONCLUSÃO: os anseios de melhora estética foram predominantes em ambos os gêneros. A maioria dos pacientes também apresentou anseio por melhora funcional. Queixas de dor orofacial foram observadas em metade da casuística, sendo a segunda queixa mais relatada.

Relationship Between the Prevalence of the Dentigerous Cyst and the Odontogenic Keratocyst Tumor and the Current Etiologic Hypothesis

Cysts are considered as nonneoplastic benign lesions that, when present for a long period of time, can cause some discomfort, especially related to the treatment form. Among the types of cysts of the maxilla, the dentigerous cyst (DC) presents substances between the dental follicle and the crown of the tooth with high potential for resorption, and the odontogenic keratocyst tumor (OKT) characterizes for its noticed rapid growth pattern and the possibility to develop carcinomas in the lesion wall. The DC is the most common type among the developing odontogenic cystic lesions, while the OKT represents 10% of these lesions. The prevalence of the OKT found in the current study was superior to the DC, opposing data of the evaluated literature, as well as the predominance in relation to the age group. Dentigerous cyst cases were found mostly in younger individuals, whereas the OKT was observed mainly in individuals between the third and fourth decades of life. This fact reflects the fragility of these features while establishing the presumptive diagnosis and insinuates the strong relation with a probable genetic predisposition. In relation to sex and race, the findings in this article were similar to those found in the literature, highlighting the possibility of a hormonal involvement. However, the anatomopathologic examination remains essential to define the main diagnosis of the lesions observed by means of imaging examinations, providing for safer diagnoses to plan the treatment.

LPS Induces Greater Bone and PDL Loss in SPARC-null Mice

Individuals with periodontal disease have increased risk of tooth loss, particularly in cases with associated loss of alveolar bone and periodontal ligament (PDL). Current treatments do not predictably regenerate damaged PDL. Collagen I is the primary component of bone and PDL extracellular matrix. SPARC/Osteonectin (SP/ON) is implicated in the regulation of collagen content in healthy PDL. In this study, periodontal disease was induced by injections of lipopolysaccharide (LPS) from Aggregatibacter actinomycetemcomitans in wild-type (WT) and SP/ON-null C57/B16 mice. A 20-mu g quantity of LPS was injected between the first and second molars 3 times a week for 4 weeks, whereas PBS control was injected into the contralateral maxilla. LPS injection resulted in a significant decrease in bone volume fraction in both genotypes; however, significantly greater bone loss was detected in SP/ON-null maxilla. SP/ON-null PDL exhibited more extensive degradation of connective tissue in the gingival tissues. Although total cell numbers in the PDL of SP/ON-null were not different from those in WT, the inflammatory infiltrate was reduced in SP/ON-null PDL. Histology of collagen fibers revealed marked reductions in collagen volume fraction and in thick collagen volume fraction in the PDL of SP/ON-null mice. SP/ON protects collagen content in PDL and in alveolar bone in experimental periodontal disease.

Success rate of immediate nonfunctional loaded single-tooth implants: Immediate versus delayed implantation

Purpose: The aim of this study was to evaluate the success rate of maxillary immediate nonfunctional single-tooth loaded implants used into fresh extraction sites (immediate placement condition) or healed ridge (delayed placement condition).Materials and Methods: Eighty-two dental implants were placed in the maxilla of 64 consecutive patients from Private practice office and from a specialization course in Implantology. Forty-six implants were inserted under immediate placement condition, and 36 were inserted under delayed placement condition. The criteria used to evaluate success rate were those previously described by Albrektsson and Zarb (Int J Prosthodont 1993;6: 95-105), and follow-up period ranged from 18.0 to 39.7 months.Results: Seventy-nine implants fulfilled the success rate criteria (96.3%). Moreover, differences concerning implantation condition were not significant (P = 0.33, Qui-square test): three of the failed implants were from immediate placement group (success rate of 93.5%), and none was from delayed placement group (success rate of 100.0%).Conclusion: In the present sample, no statistically significant differences were detected for immediate nonfunctional single-tooth loaded implants under immediate placement condition in comparison with those inserted under delayed placement condition; both protocols had high success rate in maxillary incisors, canines, and premolars areas.

Comparison of Biomaterial Implants in the Dental Socket: Histological Analysis in Dogs

Background:Bone graft procedures have been used commonly in buco-maxillo-facial surgery. For this reason, many researchers have evaluated the bone substitutes.Purpose:The present study evaluated soft and hard tissue reactions to two different hydroxyapatites HAs (synthetic HA and natural HA) and bioactive glass implanted into the sockets immediately after extraction.Materials and Methods:First and third upper and lower premolars, on both sides, were extracted from six female dogs. The alveolar sockets were randomly assigned to four groups: Group 1 - control (unfilled), Group 2 - filled with synthetic hydroxyapatite, Group 3 - filled with bovine bone mineral (natural HA), and Group 4 - filled with bioactive glass. The animals were euthanized at 4 weeks (n = 2), 8 weeks (n = 2), and 28 weeks (n = 2) after extraction. The mandible and maxilla of each animal were removed for histological analysis to determine soft tissue reactions, newly formed bone, bone characteristics, and presence or absence of implanted materials.Results:Most particles of synthetic hydroxyapatite had bone formation on their surface, although some particles showed a layer of fibrous connective tissue. The bovine bone mineral group exhibited particles partially replaced with bone formation. The bioactive glass group showed particles with a thin layer of calcified tissue, but was absent in some specimens, suggesting complete resorption.Conclusion:All biomaterials had similar behavior. Bovine bone mineral, compared to synthetic hydroxyapatite and bioactive glass, showed a larger number of particles covered with osseous tissue. All biomaterials interfered with the socket repair process.

Aspectos clínicos y morfológicos de los dientes supernumerarios

The hyperdontia teeth is an anomaly of unknown cause, characterized by increased numbers of teeth. It occurs more frequently in the maxilla, preferably in males, and is more common in permanent dentition. The presence of supernumerary teeth can be responsible for alterations in the permanent dentition, such as the delay in the eruption and dislocations. In addition, the patient may have abnormal occlusion, resorption of adjacent teeth and cyst formation. This article describes in a male patient, 9 years old, the presence of two upper right lateral incisor and one upper left lateral incisor, permanent, partially erupted. Radiological examination revealed a second left upper lateral incisor, unerupted. It should be noted that both, in the region of the 1.2 as in 2.2, the teeth showed normal anatomy and not the conoid appearance commonly observed in supernumerary teeth. In our case, in order to perform orthodontic treatment surgical removal of the teeth noted above was indicated.

Mast cells and MMP-9 in the lamina propria during eruption of rat molars: quantitative and immunohistochemical evaluation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Soft tissue profile changes after rapid maxillary expansion with a bonded expander

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Histological and histomorphometrical evaluation of furcation perforations filled with MTA, CPM and ZOE

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Post-larval morphology, growth, and development of Uca cumulanta Crane, 1943 (Crustacea, Decapoda, Ocypodidae) under laboratory conditions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Larval stages of Stenocionops furcatus (Olivier, 1791) (Decapoda : Brachyura : Majoidea) and a reappraisal of larval morphological characters for Mithracidae

Stenocionops furcatus is a spider crab found in the western Atlantic, from Georgia, USA to Rio Grande do Sul, Brazil, on sand, coral, rocks or mud bottoms from the intertidal zone to 180 m. We describe all laboratory-reared larval stages of S. furcatus obtained from the northern coast of São Paulo State, Brazil, and compare our data with existing larval descriptions for the genus and other mithracids. The larval development of S. furcatus consists of two zoeal stages and one megalopa. The durations of the first and second zoeal stage were similar to4 and 5 days respectively, the megalopa appearing 10-18 days after hatching. Our results show that the zoeae of S. furcatus differ from those of other Mithracidae by possessing four setae on the proximal lobe of the coxal endite of the maxilla, instead of five, and by the presence of mid-dorsal setae on the third abdominal somite in the second zoeal stage, which are lacking in other mithracids. Larval descriptions for Stenocionops in two previous publications were attributed to the subspecies S. furcatus coelatus from the Caribbean. Larvae from Brazilian waters closely resemble one of these accounts, suggesting that this taxon extends beyond the West Indies and that the other description represents larvae of S. furcatus furcatus. Additional morphological details, not available previously, are provided.

Juvenile development of Callinectes ornatus Ordway, 1863 (Crustacea : Decapoda : Portunidae), from megalopae obtained in the neuston

The juvenile development of Callinectes ornatus was studied from megalopae collected in the neuston off Ubatuba, São Paulo State, Brazil. The animals were raised in the laboratory under constant temperature (25 +/- 1 degrees C), filtered sea water (35 parts per thousand) from the sampling location, and the natural photoperiod. Eleven stages of the juvenile phase were obtained. The main features of the first juvenile stage diagnostic of the species are: the number of segments in the antenna; number of setae on the exopod, endopod, basal endite and coxal endite of the maxilla, on the exopod, endopod, basal endite, coxal endite and epipod of the 1(st) maxilliped, and on the exopod, endopod and epipod of the 2(nd) maxilliped. Sexual dimorphism becomes apparent from the fourth juvenile stage onwards.

Hyphessobrycon rutiliflavidus n. sp., a new characid fish from the upper rio Paraguai, State of Mato Grosso, Brazil (Characiformes : Characidae)

Hyphessobrycon rutiliflavidus, new species, is described from the upper rio Paraguai in Cuiaba, State of Mato Grosso, Brazil. The new species differs from all other congeners by the following combination of characters: black humeral spot, slightly diffuse at its tips, and caudal-peduncle blotch present; midlateral body stripe conspicuous in its posteriormost portion, extending to the tips of the middle caudal rays; anal fin with iii, 15 to iv, 19 rays (mode iv, 17); upper jaw length, 42.3 to 49.5% of the head length; maxilla with 2-5 teeth (mode 3); all the fins of males reddish-orange and of females yellowish.