Biomimetic norfloxacin sensors made of molecularly-imprinted materials for potentiometric transduction

A biomimetic sensor for norfloxacin is presented that is based on host-guest interactions and potentiometric transduction. The artificial host was imprinted into polymers made from methacrylic acid and/or 2-vinyl pyridine. The resulting particles were entrapped in a plasticized poly(vinyl chloride) (PVC) matrix. The sensors exhibit near-Nernstian response in steady state evaluations, and detection limits range from 0.40 to 1.0 μgmL−1, respectively, and are independent of pH values at between 2 and 6, and 8 and 11, respectively. Good selectivity was observed over several potential interferents. In flowing media, the sensors exhibit fast response, a sensitivity of 68.2 mV per decade, a linear range from 79 μM to 2.5 mM, a detection limit of 20 μgmL−1, and a stable baseline. The sensors were successfully applied to field monitoring of norfloxacin in fish samples, biological samples, and pharmaceutical products

Biomimetic sensors of molecularly-imprinted polymers for chlorpromazine determination

A new man-tailored biomimetic sensor for Chlorpromazine host-guest interactions and potentiometric transduction is presented. The artificial host was imprinted within methacrylic acid, 2-vinyl pyridine and 2-acrylamido-2-methyl-1-propanesulfonic acid based polymers. Molecularly imprinted particles were dispersed in 2-nitrophenyloctyl ether and entrapped in a poly(vinyl chloride) matrix. Slopes and detection limits ranged 51–67 mV/decade and 0.46–3.9 μg/mL, respectively, in steady state conditions. Sensors were independent fromthe pHof test solutionswithin 2.0–5.5.Good selectivitywas observed towards oxytetracycline, doxytetracycline, ciprofloxacin, enrofloxacin, nalidixic acid, sulfadiazine, trimethoprim, glycine, hydroxylamine, cysteine and creatinine. Analytical features in flowing media were evaluated on a double-channel manifold, with a carrier solution of 5.0×10−2 mol/L phosphate buffer. Near-Nernstian response was observed over the concentration range 1.0×10−4 to 1.0×10−2 mol/L. Average slopes were about 48 mV/decade. The sensors were successfully applied to field monitoring of CPZ in fish samples, offering the advantages of simplicity, accuracy, automation feasibility and applicability to complex samples.

Biomimetic sensors of molecularly-imprinted polymers for chlorpromazine determination

A new man-tailored biomimetic sensor for Chlorpromazine host-guest interactions and potentiometric transduction is presented. The artificial host was imprinted within methacrylic acid, 2-vinyl pyridine and 2-acrylamido-2-methyl-1-propanesulfonic acid based polymers. Molecularly imprinted particles were dispersed in 2-nitrophenyloctyl ether and entrapped in a poly(vinyl chloride) matrix. Slopes and detection limits ranged 51–67 mV/decade and 0.46–3.9 μg/mL, respectively, in steady state conditions. Sensors were independent from the pH of test solutions within 2.0–5.5. Good selectivity was observed towards oxytetracycline, doxytetracycline, ciprofloxacin, enrofloxacin, nalidixic acid, sulfadiazine, trimethoprim, glycine, hydroxylamine, cysteine and creatinine. Analytical features in flowing media were evaluated on a double-channel manifold, with a carrier solution of 5.0 × 10−2 mol/L phosphate buffer. Near-Nernstian response was observed over the concentration range 1.0 × 10−4 to 1.0 × 10−2 mol/L. Average slopes were about 48 mV/decade. The sensors were successfully applied to field monitoring of CPZ in fish samples, offering the advantages of simplicity, accuracy, automation feasibility and applicability to complex samples.

Biomimetic norfloxacin sensors made of molecularly-imprinted materials for potentiometric transduction

A biomimetic sensor for norfloxacin is presented that is based on host-guest interactions and potentiometric transduction. The artificial host was imprinted into polymers made from methacrylic acid and/or 2-vinyl pyridine. The resulting particles were entrapped in a plasticized poly(vinyl chloride) (PVC) matrix. The sensors exhibit near-Nernstian response in steady state evaluations, and detection limits range from 0.40 to 1.0 μg mL−1, respectively, and are independent of pH values at between 2 and 6, and 8 and 11, respectively. Good selectivity was observed over several potential interferents. In flowing media, the sensors exhibit fast response, a sensitivity of 68.2 mV per decade, a linear range from 79 μM to 2.5 mM, a detection limit of 20 μg mL−1, and a stable baseline. The sensors were successfully applied to field monitoring of norfloxacin in fish samples, biological samples, and pharmaceutical products.

Coevolution of restriction factors and retroviruses

Les virus exploitent la machinerie cellulaire de l'hôte pour se répliquer. Ils doivent s'adapter pour infecter la cellule hôte de manière optimale tout en échappant à la vigilance du système de défense de l'hôte. Ainsi l'hôte et les virus se livrent à de constantes batailles évolutives. Mon travail de thèse a porté sur l'étude des signatures évolutives de facteurs de l'hôte agissant comme des 'facteurs de restriction' en bloquant la réplication rétrovirale chez les primates. Plus spécifiquement, mon travail a visé à utiliser des données évolutives pour renseigner les analyses fonctionnelles et la biologie. Nous avons étudié le facteur anti-VIH-1 nommé TRIM5a (i) chez les prosimiens pour mieux comprendre son rôle dans le contrôle d'un lentivirus endogène, (ii) dans son activité contre d'autres anciennes infections représentées par des rétrovirus endogènes humains et (iii) en tant que protéine capable de générer des mutants de la capside. Premièrement nous nous sommes intéressés à TRIM5a chez deux espèces de lémuriens dont Microcebus murinus qui porte le lentivirus endogène PSIV dans son génome depuis plusieurs millions d'années,. Nous avons observé que TRIM5a chez M. murinus a un spectre d'activité antivirale réduit à l'opposé de TRIM5a chez le Lemur catta - non porteur du PSIV endogène - qui bloque une large variété de rétrovirus dont le PSIV. De ce fait TRIM5a aurait pu contribuer à protéger certaines espèces de lémuriens vis-à-vis d'anciennes infections par le PSIV. A l'inverse du PSIV, des virus dérivés des rétrovirus endogènes humains HERV-K and HERV-H se sont révélés largement résistants à l'inhibition par TRIM5a. Ces données illustrent une absence de protection par TRIM5a face à d'autres anciennes infections rétrovirales. Puis, pour évaluer l'impact de la protéine TRIM5a humaine sur le VIH-1, nous avons testé l'effet de mutations des résidues sous sélection positive dans la capside du VIH-1 sur l'inhibition par TRIM5a. Nos résultats montrent que TRIM5a ne jouerait pas un rôle significatif dans l'évolution de la capside du VIH-1. Enfin notre travail a porté sur le facteur anti-VIH-1 SAMHD1 récemment découvert, que nous avons séquencé chez 25 espèces de primates. L'analyse évolutive des sites sous sélection positive et des expériences fonctionnelles ont permis d'identifier le domaine de SAMHD1 interagissant avec la protéine lentivirale Vpx. De même que d'autres protéines virales contrecarrent les facteurs de restriction en les menant à la dégradation, nous avons observé que Vpx induit la dégradation de SAMHD1 de manière spécifique à l'espèce. Ces découvertes contribuent à comprendre comment les facteurs de restriction et les virus co-évoluent pour se neutraliser l'un l'autre. - Viruses hijack the host cellular machinery to replicate. They adapt to infect optimally host cells while escaping host defense systems. Viruses and the host coevolve in an evolutionary struggle. My thesis work has been devoted to study the evolutionary signatures of host factors acting as restriction factors that block retroviral replication in primates. Specifically, my work aimed at using evolutionary data to inform functional analyses and biology. We studied the anti-HIV-1 factor TRIM5a (i) in prosimians to better understand its possible role in the control of an endogenous lentivirus, (ii) in its activity against other ancient infections - as represented by HERVs, and (iii) as a protein capable of generating escape mutants in the viral capsid. First, my work focused on two lemur species, one of which was the gray mouse lemur that carries the endogenous lentivirus PSIV integrated in its genome for several million years. TRIM5a from gray mouse lemur exhibited a limited antiviral spectrum as opposed to TRIM5a from ring-tailed lemur - not a host of PSIV - that is able to block diverse retroviruses notably PSIV. These results support the possible contribution of TRIM5a in protecting lemur species from ancient infection by PSIV. In contrast, chimeric viruses derived from two human endogenous retroviruses were broadly resistant to TRIM5a-mediated restriction, suggesting TRIM5a lack of activity against other types of ancient infections. To evaluate the recent impact of human TRIM5a on HIV-1 evolution, we tested whether variants at positively selected sites in the HIV-1 capsid affected the ability of human TRIM5a alleles to restrict HIV-1. Our results indicate that TRIM5a does not play a significant role in the evolution of HIV1 capsid. At last, our work concentrated on the newly discovered anti-HIV-1 restriction factor SAMHD1. We determined its coding sequence in a panel of 25 species of primates. Evolutionary analyses of positively selected sites in SAMHD1 domains and functional assays identified the domain of SAMHD1 interacting with the lentiviral protein Vpx. Similar to other viral countermeasures targeting cellular restriction factors, Vpx was responsible of the degradation of SAMHD1 orthologs in a species-specific manner. These findings contributed to understanding how restriction factors and viruses evolve to counteract each other.

Electrospinning and characterization of self-assembled inclusion complexies

L’électrofilage est une technique permettant de fabriquer des fibres polymériques dont le diamètre varie entre quelques nanomètres et quelques microns. Ces fibres ont donc un rapport surface/volume très élevé. Les fibres électrofilées pourraient trouver des applications dans le relargage de médicaments et le génie tissulaire, comme membranes et capteurs chimiques, ou dans les nanocomposites et dispositifs électroniques. L’électrofilage était initialement utilisé pour préparer des toiles de fibres désordonnées, mais il est maintenant possible d’aligner les fibres par l’usage de collecteurs spéciaux. Cependant, il est important de contrôler non seulement l’alignement macroscopique des fibres mais aussi leur orientation au niveau moléculaire puisque l’orientation influence les propriétés mécaniques, optiques et électriques des polymères. Les complexes moléculaires apparaissent comme une cible de choix pour produire des nanofibres fortement orientées. Dans les complexes d’inclusion d’urée, les chaînes polymères sont empilées dans des canaux unidimensionnels construits à partir d’un réseau tridimensionnel de molécules d’urée liées par des ponts hydrogène. Ainsi, les chaînes polymère sonts très allongées à l’échelle moléculaire. Des nanofibres du complexe PEO-urée ont été préparées pour la première fois par électrofilage de suspensions et de solutions. Tel qu’attendu, une orientation moléculaire inhabituellement élevée a été observée dans ces fibres. De tels complexes orientés pourraient être utilisés à la fois dans des études fondamentales et dans la préparation de matériaux hiérarchiquement structurés. La méthode d’électrofilage peut parfois aussi être utilisée pour préparer des matériaux polymériques métastables qui ne peuvent pas être préparés par des méthodes conventionnelles. Ici, l’électrofilage a été utilisé pour préparer des fibres des complexes stables (α) et "métastables" (β) entre le PEO et l’urée. La caractérisation du complexe β, qui était mal connu, révèle un rapport PEO:urée de 12:8 appartenant au système orthorhombique avec a = 1.907 nm, b = 0.862 nm et c = 0.773 nm. Les chaînes de PEO sont orientées selon l’axe de la fibre. Leur conformation est significativement affectée par les ponts hydrogène. Une structure en couches a été suggérée pour la forme β, plutôt que la structure conventionnelle en canaux adoptée par la forme α. Nos résultats indiquent que le complexe β est thermodynamiquement stable avant sa fonte et peut se transformer en forme α et en PEO liquide par un processus de fonte et recristallisation à 89 ºC. Ceci va dans le sens contraire aux observations faites avec le complexe β obtenu par trempe du complexe α fondu. En effet, le complexe β ainsi obtenu est métastable et contient des cristaux d’urée. Il peut subir une transition de phases cinétique solide-solide pour produire du complexe α dans une vaste gamme de températures. Cette transition est induite par un changement de conformation du PEO et par la formation de ponts hydrogène intermoléculaires entre l’urée et le PEO. Le diagramme de phases du système PEO-urée a été tracé sur toute la gamme de compositions, ce qui a permis d’interpréter la formation de plusieurs mélanges qui ne sont pas à l’équilibre mais qui sont été observés expérimentalement. La structure et le diagramme de phases du complexe PEO-thiourée, qui est aussi un complexe très mal connu, ont été étudiés en détail. Un rapport molaire PEO :thiourée de 3:2 a été déduit pour le complexe, et une cellule monoclinique avec a = 0.915 nm, b = 1.888 nm, c = 0.825 nm et β = 92.35º a été déterminée. Comme pour le complexe PEO-urée de forme β, une structure en couches a été suggérée pour le complexe PEO-thiourée, dans laquelle les molécules de thiourée seraient disposées en rubans intercalés entre deux couches de PEO. Cette structure en couches pourrait expliquer la température de fusion beaucoup plus faible des complexes PEO-thiourée (110 ºC) et PEO-urée de forme β (89 ºC) en comparaison aux structures en canaux du complexe PEO-urée de forme α (143 ºC).

Propriétés supramoléculaires des cations diimidazolium disubstitués : des complexes d’inclusion en solution aux interactions à l’état cristallin et cristal liquide

Les sels d’imidazolium ont un rôle important dans certaines protéines et acides nucléiques et ont été utilisés à de nombreuses reprises dans des assemblages supramoléculaires en raison de leurs propriétés uniques. Les sels de diimidazolium dérivés sont toutefois moins connus. Ils ont pour l’instant uniquement été utilisés comme des précurseurs de carbènes N-hétérocycliques. Ils sont donc à la base de plusieurs catalyseurs utilisés pour des réactions de couplage croisés mais leurs propriétés sont toutefois méconnues dans le cadre de la chimie supramoléculaire. Cette classe de composés a nottament attiré notre attention en raison de la facilité de modification de leurs propriétés physico-chimiques par modification de leur structure chimique. L’objectif général des travaux présentés dans cette thèse est l’étude des propriétés supramoléculaires des sels de diimidazolium disubstitués en solution (aqueuse ou organique), ainsi qu’en phase solide ou cristal-liquide. L’influence de l’espaceur entre les deux noyaux imidazolium ainsi que l’influence des substituants latéraux et des contre-ions a été étudiée. Dans un premier temps, les propriétés de complexation des sels de diimidazolium à des macrocycles sont étudiées. Les sels bromure sont étudiés en solution aqueuse avec plusieurs cyclodextrines et le cucurbit[7]uril, et les sels hexafluorophosphate sont étudiés en solution organique pour leur complexation avec l’éther couronne DB24C8 et un calix[4]arène. Cette nouvelle classe de composés a montré de très bonnes propriétés de complexation à ces différents macrocycles en solution et a également permis de contrôler différents assemblages supramoléculaires à l’interface air-eau. Dans un deuxième temps, l’étude des sels de phénylènediimidazolium a permis de modifier les propriétés de complexation en solution pour obtenir la formation de complexes multiples avec le cucurbit[7]util en solution aqueuse. Cette même famille de composés a également permis la formation de cristaux liquides ioniques lorsque les substituants sont des chaînes alkyles plus longues. La résolution de plusieurs structures cristallines de différents sels de diimidazolium a finalement permis de comprendre la nature des interactions intermoléculaires à l’état cristallin. La recherche présentée dans cette thèse a donc permis une étude détaillée des propriétés supramoléculaires des sels de diimidazolium dans tous les états de la matière qui leur sont accessibles.

Crystal Structures and Spectral Investigation of Aroylhydrazones and their Mixed Ligand Metal Chelates

Supra molecular architectures of coordination complexes of liydrazones through non covalent interactions have been explored. Molecular self—assernbly driven by weak interactions such as hydrogen— bonding, K '”T[, C-1-I‘ "TE, van der Waals interactions, and so forth are currently of tremendous research interest in the fields of molecule based materials. The directional properties of the hydrogembonding interaction associate discrete molecules into aggregate structures that are sufficiently stable to be considered as independent chemical species. Chemistry can borrow nature’s strategy to utilize hydrogen-bonding as Well as other noncovalent interactions as found in secondary and tertiary structures of proteins such as the double helix folding of DNA, hydrophobic selflorganization of phospholipids in cell membrane etc. In supramolecular chemistry hydrogen bonding plays an important role in forming a variety of architectures. Thus, the wise modulation and tuning of the complementary sites responsible for hydrogen—bond formation have led to its application in supramolecular electronics, host-guest chemistry, self-assembly of molecular capsules, nanotubes etc. The work presented in this thesis describes the synthesis and characterization of metal complexes derived from some substituted aroylhydrazones. The thesis is divided into seven chapters.

Synthesis and Characterization of Novel Spiro-Starburst-Structures as Blue Light Emitters and Zeolites

Spiro-starburst-structures with symmetric globular structures in forms of first and second generations that readily form stable amorphous glasses have been synthesized and then characterised in this work. During the synthesis of these materials, possibilities of the extension of the chains of the phenyl rings in 2,2’,7 and 7’-positions of the central core of the spirobifluorene as well as the 2’,7 and 7’-positions of the terminal spirobifluorene units of the spiro-starburst-structures have been investigated so that solubilities and morphologies of the compounds are not negatively influenced. Their morphological properties have been explored by recording their decomposition temperature and glass transition temperature. These compounds possessing two perpendicular arrangement of the two molecular halves show high glass transition temperature (Tg), which is one of the most important parameter indicating the stability of the amorphous state of the material for optoelectronic devices like organic light emitting diodes. Within the species of second generation compounds, for example, 4-spiro3 shows the highest Tg (330 °C) and the highest branching degree. When one [4B(SBF)SBF-SBF 84] or two [4SBFSBF-SBF 79] terminal spirobifluorene units are removed, the Tg decreases to 318 °C and 307 °C respectively. Photo absorption and fluorescence spectra and cyclic voltammetry measurements are taken in account to characterize the optoelectronic properties of the compounds. Spiro-starburst-structures emit radiation in the blue region of the visible spectrum. The peak maxima of absorption and emission spectra are observed to be at higher wavelength in the molecules with longer chromophore chains than in the molecules with shorter chromophore chains. Excitation spectra are monitored with their emission peak maxima. The increasing absorbing species in molecule leads to increasing molar extinction coefficient. In the case of 4B(TP)SBF-SBF 53 and 4B(SBF)SBF-SBF 84, the greater values of the molar extinction coefficients (43*104 and 44*104 L mol-1 cm-1 respectively) are the evidences of the presence of four times octiphenyl conjugation rings and eight times terminal fluorene units respectively. The optical properties of solid states of these compounds in the form of thin film indicate that the intermolecular interaction and aggregation of individual molecules in neat amorphous films are effectively hindered by their sterically demanding structures. Accordingly, in solid state, they behave like isolated molecules in highly dilute solution. Cyclic voltammetry measurements of these compounds show electrochemically reversibility and stability. Furthermore, the zeolitic nature (host-guest) of the molecular sieve of the synthesized spiro-starburst-structures has been analysed by thermogravimetric analysis method.

Host–guest supramolecular interactions in the coordination compounds of 4,4′-azobis(pyridine) with MnX2(X = NCS–, NCNCN–, and PF6–): structural analyses and theoretical study

Three new Mn(II) coordination compounds {[Mn(NCNCN)2(azpy)]·0.5azpy}n (1), {[Mn(NCS)2(azpy)(CH3OH)2]·azpy}n (2), and [Mn(azpy)2(H2O)4][Mn(azpy)(H2O)5]·4PF6·H2O·5.5azpy (3) (where azpy = 4,4'-azobis-(pyridine)) have been synthesized by self-assembly of the primary ligands, dicyanamide, thiocyanate, and hexafluorophosphate, respectively, together with azpy as the secondary spacer. All three complexes were characterized by elemental analyses, IR spectroscopy, thermal analyses, and single crystal X-ray crystallography. The structural analyses reveal that complex 1 forms a two-dimensional (2D) grid sheet motif These sheets assemble to form a microporous framework that incorporates coordination-free azpy by host-guest pi center dot center dot center dot pi. and C-H center dot center dot center dot N hydrogen bonding interactions. Complex 2 features azpy bridged one-dimensional (ID) chains of centrosymmetric [Mn(NCS)(2)(CH3OH)(2)} units which form a 2D porous sheet via a CH3 center dot center dot center dot pi supramolecular interaction. A guest azpy molecule is incorporated within the pores by strong H-bonding interactions. Complex 3 affords a 0-D motif with two monomeric Mn(II) units in the asymmetric unit. There exist pi center dot center dot center dot pi, anion center dot center dot center dot pi, and strong hydrogen bonding interactions between the azpy, water, and the anions. Density functional theory (DFT) calculations, at the M06/6-31+G* level of theory, are used to characterize a great variety of interactions that explicitly show the importance of host-guest supramolecular interactions for the stabilization of coordination compounds and creation of the fascinating three-dimensional (3D) architecture of the title compounds.

Triangular ruthenium acetate clusters containing the bis(pyridyl)propane ligand and their inclusion chemistry with beta-cyclodextrin

The triruthenium carboxylate cluster [Ru(3)O(OAc)(6)(py)(2)(bpp)](+) (OAc = acetate) containing the bridging 1,3-bis(4-pyridyl)propane (bpp) ligand, and its dimeric species [{Ru(3)O(OAc)(6)(py(2))}(2)(mu-bpp)](2+) were synthesized in order to investigate their inclusion compounds with beta-cyclodextrin (beta-CD). Characterization of the complexes was carried out based on spectroscopic, electrochemical and spectroelectrochemical techniques, while the formation of inclusion complexes was evaluated using (1)H NMR/NOESY spectroscopy. Since bpp is a flexible ligand, a DFT study was carried out in order to characterize its conformational isomers and their possible role in the host-guest chemistry with beta-CD. Instead of observing the formation of inclusion compounds with different stoichiometries, we observed the formation of 1:1 bpp/beta-CD compounds in which the bpp ligand assumes different conformations. The assembly of polymetallic rotaxane species was successfully demonstrated by monitoring the (1)H NMR spectra of the monomeric cluster species in the presence of aquapentacyanoferrate(II) ions and beta-CD.

Using azahetercyclic electrophiles to synthesize novel Bicyclooxacalixarenes and Oxacalix[2]N-hexylnaphthalimide[2]naphthyridines

Various bicyclooxacalixarenes, tricyclooxacalixarenes and oxacalix[2]N-hexylnapthalimide[2]naphthyridines are synthesized via SnAr condensation. This research has involved synthesis optimization. The oxacalix[2]N-hexylnaphthalimide[2]naphthyridines have exhibited host-guest binding in fluorescence experiments. These compounds have been characterized by NMR spectroscopy as well as single crystal X-ray diffraction.

Organotin-oxo clusters

This thesis reports on the development and expansion of reliable synthetic di-and multi-tin precursors for the assembly of oligomeric organotin-oxo compounds in which the shape, dimension and tin nuclearity can be controlled. The reaction of polymeric diorganotin oxides, (R2SnO)m (R = Me, Et, n-Bu, n-Oct, c-Hex, i-Pr, Ph), with saturated aqueous NH4X solutions (X = F, Cl, Br, I, OAc) in refluxing 1,4-dioxane afforded in high yields dimeric tetraorganodistannoxanes, [R2(X)SnOSn(X)R2]2, and in a few cases diorganotin dihalides or diacetates, R2SnX2. This method appears to be particularly good for the synthesis of halogenated tetraorganodistannoxanes but a less suitable method for the preparation of dicarboxylato tetraorganodistannoxanes. Identification of [R2(OH)SnOSn(X)R2]2 (R = n-Bu; X = Cl, Br) and [R2(OH)SnOSn(X)R2][R2(X)SnOSn(X)R2] suggest a serial substitution mechanism starting from [R2(OH)SnOSn(OH)R2]2. A series of α, ω -bis(triphenylstannyl)alkanes, [Ph3Sn]2(CH2)n (n = 3-8, 10, 12) and some of their derivatives were synthesised and characterised. These α, ω-bis(triphenylstannyl)alkanes, [Ph3Sn]2(CH2)n were converted to the corresponding halides [R(Cl)2Sn]2(CH2)n (R = CH2SiMe3) and subsequently to the polymeric oxides {[R(0)Sn]2(CH2)n}m. Reaction of {[R(O)Sn]2(CH2)n}m with [R(Cl)2Sn]2(CH2)n. (n = 3, n' = 4 and n = 4, n' = 3) in toluene at 100°C results in a mixture of symmetric and asymmetric double ladders, where different spacer chain lengths (n and n') provide the source of asymmetry. The coexistence at high temperature of separate 119Sn NMR signals belonging to symmetric and asymmetric double ladders suggests an equilibrium that is slow on the 119Sn NMR time scale and the position of which is temperature dependent. However, 119Sn NMR spectroscopic experiments of {[R(0)Sn]2(CH2)3}m with [R(Cl)2Sn]2(CH2)n for longer spacers (n - 5, 6, 8, 10, 12) reveal that molecular self-assembly of symmetric spacer-bridged di-tin precursors of equal chain length is preferred over asymmetric species. An ether-bridged di-tin tetrachloride [R(Cl)2Sn(CH2)3]2O (R = CH2SiMe3) and its corresponding polymeric oxide {[R(O)Sn(CH2)3]2O}m were synthesised and characterised. Reaction of [R(Cl)2Sn(CH2)3]2O with {[R(O)Sn(CH2)3]2O}m results in a unique functionalised double ladder {{[RSn(Cl)](CH2)3O(CH2)3[RSn(Cl)]}O}4 whose structure in the solid state was determined by X-ray analysis. Identification of tetrameric functionalised double ladder as well as dimeric and monomeric species suggest the existence of an equilibrium in solution. The feasibility of the functionalised double ladder to form host-guest complexes with a variety of metal cations is investigated using electrospray mass spectrometry (ESMS). Evidence for such complexes is found only for sodium cations. The reaction between {[R(O)Sn]2(CH2)n}m (n = 3, 4, 8, 10) and triflic acid is described. The initial formed products [RSn(CH2)nSnR](OTf)4 are easily hydrolysed. For n = 3, self-assembly leads to a discrete double ladder type structure, {{[RSn(OH)](CH2)3[RSn(H2O)]}O}44OTf, which is the first example of a cationic double ladder. For n ≥ 3, hydrolysis gives polymeric products, as demonstrated by the crystal structure of {[(H2O)(OH)RSn]2(CH2)4-2OTf2H2O}m. Two spacer-bridged terra-tin octachlorides [R(Cl)2Sn(CH2)3Sn(Cl)2]2(CH2)n (R = CH2SiMes; n = 1, 8) and their corresponding polymeric oxides {[R(O)Sn(CH2)3Sn(O)]2(CH2)n}m were successfully synthesised and characterised. Attempts were made to synthesise quadruple ladders from these precursors. Reactions of [R(Cl)2Sn(CH2)3Sn(Cl)2]2CH2 with {[R(O)Sn(CH2)3Sn(O)]2CH2}m or (Y-Bu2SnO)3 result in, mostly insoluble, amorphous solids. Reactions of [R(Cl)2Sn(CH2)3Sn(Cl)2]2(CH2)8 with {[R(O)Sn(CH2)3Sn(O)]2(CH2)8}m or (t-Bu2SnO)s result in new tin-containing species which are presumably oligomeric. The synthesis of a series of alkyl-bridged di-tin hexacarboxylates [(RCO2)3Sn]2(CH2)n (n = 3, 4; R = Ph, c-C6H11, CH3, C1CH2) is also reported. The hydrolysis of these compounds is facile and complex. There appears to be no correlation between spacer chain length and hydrolysis product. However, the conjugate acid strength of the carboxylate does appear to be important. In general only insoluble amorphous polymeric organotin-oxo compounds were obtained.

The design and evaluation of two types of chemical sensor

During the course of this investigation it was discovered that functionalised Ruthenium tris(bipyridyl) complexes exhibit different chemical, spectroscopic and electrochemical properties to those of the parent compound. Furthermore, it was possible to develop 1,8-naphthalimide-based compounds that furnished strong 1:1 host:guest complexes with larger anions such as hydrogen pyrophosphate. This dissertation presents in investigation into the systhesis and analytical evaluation of two types of chemical sensors: chemiluminescent and fluorescent.

Norbornenes and [n]polynorbornanes as molecular scaffolds for anion recognition

In total, 18 novel norbornene and [n]polynorbornane based anion receptors were synthesised and evaluated. The host:guest complexes examined were influenced by the position and number of available recognition sites within each binding cleft. It was concluded that [n]polynorbornane scaffolds are ideal for studying the fundamental concepts of supramolecular chemistry.