Medição da densidade óssea através de ondas eletromagnéticas e classificação por MVS

This work holds the purpose of presenting an auxiliary way of bone density measurement through the attenuation of electromagnetic waves. In order to do so, an arrangement of two microstrip antennas with rectangular configuration has been used, operating in a frequency of 2,49 GHz, and fed by a microstrip line on a substrate of fiberglass with permissiveness of 4.4 and height of 0,9 cm. Simulations were done with silica, bone meal, silica and gypsum blocks samples to prove the variation on the attenuation level of different combinations. Because of their good reproduction of the human beings anomaly aspects, samples of bovine bone were used. They were subjected to weighing, measurement and microwave radiation. The samples had their masses altered after mischaracterization and the process was repeated. The obtained data were inserted in a neural network and its training was proceeded with the best results gathered by correct classification on 100% of the samples. It comes to the conclusion that through only one non-ionizing wave in the 2,49 GHz zone it is possible to evaluate the attenuation level in the bone tissue, and that with the appliance of neural network fed with obtained characteristics in the experiment it is possible to classify a sample as having low or high bone density

Efeito da introdução de resíduo de cinza de forno cerâmico em massa para cerâmica estrutural

The red ceramics and structural ceramics, as they are known, include ceramic materials made by blocks of seals and structures, bricks, tiles, smail flagstones manacles, rustic floors and ornamental materials. Their fabrication uses raw material such as clay and clay sites, with some content of impurity. It has good durability and mechanical strength to compression, low cost, making it one of the mainly used materials in civil engineering. The incorporation of many industrial activities residue to ceramic products is a technological alternative for reducing the environmental impact caused by its carefree disposal. This incorporation can promote chemical change and inertness of metals from residue, by fixation in the glassy phase of ceramic during the burning stage. The main aim of this project is to study the technical feasibility of the addition of ceramic oven ash into formulations of mass for structural ceramics. In this project two kinds of clay (plastic and non-plastic) were used, as well as the ash from firewood used in the process of burning of structural ceramics. A group of experiments was outlined, which permitted the evaluation of the influence of the burning cycle in different temperatures of the ash content in formulations for ceramic blocks through technological properties, mechanical behavior and microstructure. Five samples were processed of each one of the masses of plastic and non-plastic clay without addition of ash and with addition of ash on the percentages of 10 % and 20 %, for temperatures of 850 °C, 950 °C, 1050 °C and 1150 °C, obtained through sinterization process. Among the studied compositions, the one which presented best performance was the mass of clay with 10 % of ash, at temperature of 1150 °C, with the smallest absorption of water, the smallest apparent porosity, specific apparent mass a bit over the others and greatest mechanical resistance to flexion. The composition made confirmed the technical feasibility of the use of ash in the mass for structural ceramics with maintenance of its necessary characteristics for its purposes

Obtenção de placas cerâmico a partir de formulações de massas triaxiais de resíduos de caulim, chamote de telha e cinza vegetal

The production of red ceramic is an industrial activity that causes an intense impact. The manufacture of its products considerably increases the demand for natural resources, mainly with the extraction of raw material. The ceramic material produced generates waste, such as ash firewood and chamote. The residue from the beneficiation of kaolin is deposited in a poor, degrades the environment and contaminate water sources and soil, constituting in this manner, ecological disasters. The main objective of this work is to develop the formulation of a ceramic product consisting solely of industrial solid wastes, from ceramic tiles, (chamote) residue of kaolin and ash firewood. It is assumed that this product made in the laboratory can be used in coatings, wall and floor. The aim is to facilitate the replacement of the raw material of original composition of a ceramic body, for waste, while the process of production equal to the conventionally used, so that the properties of the product are reproduced. This work is characterized waste as its chemical composition, analysis of particle size, X-ray diffraction and thermal behavior. Several formulations were studied. The mass of waste was prepared by dry process, pressed to 25 MPa, and then burned in muffle type oven to 850, 950, 1050 and 1150 °C. The results showed that it is technically possible to produce porous tiles only with waste. It was found that the formulations of bodies play a key role in the properties of the final product, as well as the sintering temperature and heating rates. RN in the waste of kaolin is estimated at 15,000 t/month, about 3,000 gray t/month and chamote with 10 million pieces/month damaged. The presence of carbonates of calcium and magnesium at 1050 ° C results in an appropriate porosity and mechanical strength. The formulation M3JE, composed of 69% waste of kaolin, 7.7% and 23.3% of chamote of gray, became suitable for porous materials with the strength and absorption within the level of national and international standards

Aproveitamento de resíduos de cinza da cana de açúcar em massas cerâmicas

This study aimed to investigate the use of cane sugar ashes from small-scale stills of Eunápolis region, state of Bahia, in pottery mass that can be developed as porcelain stoneware. Bahia is the second largest producer of rum distillery in Brazil. In the production of rum is produced residue called bagasse, which is used to generate electricity in Power plants and in the distillery itself, generating ashes as residue, which is played in nature, causing environmental damage. We studied 5 (five) formulations of 0% 10% 20%, 30% and 40% by weight of the ash, without ignition and 3 (three) formulations of 10%, 20% and 30% with gray ash temperature of 1250ºC. The formulation at 0% by weight of ash was used for a comparison between the traditional mass of porcelain stoneware and the masses with the addition of ash calcined, replacing feldspar. The percentage by weight of kaolin and of Clay was kept the same, 30%, and all raw materials were derived from the state of Bahia. The samples were made in uniaxial array with dimensions of (60 x 20 x 5) mm and compressed to a pressure of 45 MPa. Assays were performed to characterize the raw by X-ray fluorescence, X-ray diffraction, ATD and ATG and Dilatometric analysis. The samples were sintered at temperatures of 1100°C, 1150°C, 1200°C and 1250°C, for the specimens with the ashes without ash and 1150° C and 1200° C for specimens with the gray level of calcined 60 minutes. and then we made a cooling ramp with the same rate of warming until reach ambient temperature. The sintered bodies were characterized by water absorption, porosity, linear shrinkage, bending strength and XRD of the fracture surface and the results analyzed. It was proven, after results of tests performed, that it is possible to use the ash residue of sugar cane bagasse on ceramic coating with the addition of up to 10% wt of the residue ash

Estudo da introdução de resíduo de britagem de rocha calcária e cinza de biomassa de cana-de-açúcar em formulações de argamassas colantes

The adhesive mortars are a mixture of cement, sand, and additives to polymers that retain the mixing water and promotes adherence, being used in setting on various ceramic substrates. The sand used in the production of these mortars is from the riverbeds, and with the increasing restriction of these sands extraction by environmental agencies, and often having to be transported over long distances to the consumer center. This work aims to design and physical and mechanical characterization of ecological adhesive mortar with total replacement of natural sand by sand from the crushing of limestone, and the addition of mineral ash biomass of cane sugar in partial replacement cement used in the production of adhesive mortar , aiming compositions that meet the regulatory specifications for use adhesive mortar. Standardized tests to determine the tensile bond strength (NBR 14081-4), determination of open time (NBR 14081-3) and determination of slip (NBR 14081-5) were performed. Were also conducted trials squeeze flow in different formulation, the mortar with addition of 15 % gray biomass of cane sugar for cement mortars as well as the total replacement of natural sand by sand limestone crushing, got the best performance among the mortars studied, it was found that the addition of biomass to replace cement is perfectly feasible due to its pozzolanic activity, which contributed to this reduction in the cement matrix formation of adhesive mortar

Caracterização do cultivar de bananeira 'figo-cinza' em dois ciclos de produção

O presente trabalho teve como objetivo avaliar as características de crescimento, produção e caracterizar alguns atributos de qualidade dos frutos do cultivar de bananeira-Figo-Cinza em dois ciclos de produção, nos anos de 2009 e 2010. Foram avaliadas características de crescimento, tais como altura da planta, circunferência do pseudocaule, número de folhas ativas, número de perfilhos e número de dias entre o florescimento e a colheita. Estas medidas foram feitas na emissão da inflorescência. Foram mensuradas também as características de produção, como peso do cacho, número de frutos, número de pencas, número, comprimento e diâmetro dos frutos da 2ª penca. em relação à qualidade dos frutos, foram analisados os atributos físicos e químicos: textura; pH; acidez titulável e sólidos solúveis. O delineamento adotado foi o inteiramente casualisado, com dois tratamentos (ciclos), cinco repetições e duas plantas úteis por parcela experimental. Foi utilizado o teste de Tukey (P< 0,05) para a comparação entre as médias. em geral, as características de crescimento e produção foram maiores no segundo ciclo, apresentando 134 dias do florescimento à colheita, circunferência do pseudocaule de 64,20 cm, altura de planta igual a 3,82 m e peso de cacho de 11,83 kg. Os atributos de qualidade não variaram entre os ciclos, exceto a textura, que foi maior no segundo ciclo, com valores médios de 993,31 gfcm-2.

Ação local do alendronato sódico na reparação óssea de ratos espontaneamente hipertensos (SHR)

FUNDAMENTO: A hipertensão arterial é uma desordem caracterizada por alterações relevantes no tecido ósseo. O alendronato sódico tem indicação no tratamento de doenças ósseas, por causa de sua afinidade pela hidroxiapatita, inibindo as reabsorções ósseas. OBJETIVO: Analisar a ação local do alendronato sódico na reparação óssea de ratos espontaneamente hipertensos (SHR). MÉTODOS: Um defeito ósseo foi criado no fêmur esquerdo de 80 ratos. de acordo com o material utilizado no local, criaram-se quatro grupos: controle (C), amido (Am), alendronato 1 mol (A1) e alendronato 2 mol (A2). Após 7 e 21 dias, os animais foram sacrificados. Foram realizadas análises histológicas e histomorfométricas e os dados foram submetidos a análise de variância (ANOVA) e teste de Tukey (5%). RESULTADOS: Aos 7 dias, observou-se, na área do defeito, tecido conjuntivo com hemorragia e inflamação em todos os grupos. Alguns apresentavam matriz osteóide. Os grupos A1 e A2 apresentaram, ainda, uma rede de fibrina. Aos 21 dias, as trabéculas ósseas fechavam praticamente a extensão do defeito nos grupos C e Am. No grupo A1 de animais machos, observaram-se trabéculas que se irradiavam do canal medular até a área do defeito. Nos grupos A1 e A2, constatou-se apenas a presença de tecido conjuntivo com mínima deposição de osteóide. Um achado histológico marcante foi a formação de tecido ósseo extracortical subperiosteal nos animais dos grupos A1 e A2. CONCLUSÃO: Concluiu-se que a administração do alendronato sódico não contribuiu para o reparo ósseo nos ratos SHR, mas possivelmente tenha sido responsável pelas formações ósseas extracorticais observadas.

Avaliação do transplante de medula óssea alogênico por meio do estudo de regiões de repetições seqüenciais no genoma humano (VNTRs e STRs)

Os objetivos deste estudo foram estabelecer um protocolo para a análise de minissatélites ou VNTRs e microssatélites ou STRs em pacientes que se submeteram ao TMO alogênico; verificar a validade da metodologia e dos loci estudados e avaliar o tipo de recuperação do paciente. Foram analisados o DNA do paciente anterior e posterior ao transplante de 14 indivíduos e dos respectivos doadores. Amplificações por PCR de seis loci: D1S80, SE33, HumTH01, 33.6, HumARA e HumTPO foram realizadas. Os produtos amplificados foram separados por eletro­forese vertical em gel de poliacrilamida, e os fragmentos visualizados por coloração pela prata. Esse procedimento mostrou ser válido na verificação da recuperação alogênica, autóloga e provavelmente na quimérica. da somatória dos loci estudados, 63,1% apresentaram resultados possíveis de serem avaliados e, desses, 19,0% mostraram resultado informativo, 13,1% parcialmente informativo e 31,0% não informativo. Os 36,9% restantes não foram possíveis de avaliação. Dos loci avaliados, o que demostrou maior índice de resultado informativo foi o SE33, parcialmente informativo o HumTPO e não informativo o HumTH01, sendo o locus 33.6 o que mais apresentou resultados não possíveis de serem avaliados. Por outro lado, determinou-se a recuperação do paciente posterior ao transplante em 71,4% dos indivíduos, sendo que, desses, 90% apresentaram recuperação alogênica e 10% recuperação autóloga.

Adesão de células mesenquimais da medula óssea de camundongos e do ligamento periodontal de ratos a diferentes superfícies de titânio: estudo comparativo in vitro

The present experiment used cell culture to analyze the adhesion capacity of mouse mesenchymal bone marrow cells and rat periodontal ligament to different titanium surfaces. Grade II ASTM F86 titanium discs 15mm in diameter and 1.5mm thick were used and received 2 distinct surface treatments (polished and cathodic cage plasma nitriding). The cells were isolated from the mouse bone marrow and rat periodontal ligament and cultured in α-MEM basic culture medium containing antibiotics and supplemented with 10% FBS and 5% CO2, for 72 hours at 37ºC in a humidified atmosphere. Subculture cells were cultured in a 24-well plate with a density of 1 x 104 cells per well. The titanium discs were distributed in accordance with the groups, including positive controls without titanium discs. After a 24-hour culture, the cells were counted in a Neubauer chamber. The results show that both the mouse mesenchymal bone marrow cells and rat periodontal ligament cells had better adhesion to the control surface. The number of bone marrow cells adhered to the polished Ti surface was not statistically significant when compared to the same type of cell adhered to the Ti surface treated by cathodic cage plasma nitriding. However a significant difference was found between the control and polished Ti groups. In relation to periodontal ligament cell adhesion, a significant difference was only found between the control and plasma-treated Ti surfaces. When comparing equal surfaces with different cells, no statistically significant difference was observed. We can therefore conclude that titanium is a good material for mesenchymal cell adhesion and that different material surface treatments can influence this process

Avaliação de alterações orais em pacientes submetidos a transplante de medula óssea

Bone marrow transplantation (BMT) is currently the best therapeutic option for patients with hematologic diseases, solid tumors or autoimmune disorders. It is characterized by intravenous infusion of hematopoietic stem cells in order to restore marrow function. However, this procedure requires concomitant immunosuppression treatment, which favors the development of certain complications, often manifested in the oral cavity. This study aimed to evaluate the incidence of oral changes in patients undergoing BMT and to correlate these results with clinical aspects related to the patients and the transplants performed. This is a prevalence study, with cross-sectional design, carried out in a BMT service at the Institute of Onco-Hematology of Natal (ION) and Natal Hospital Center. Data collection was based on questionnaires, clinical examination of the oral cavity and consultation in the medical records. The sample consisted of 51 patients undergoing BMT. After the analysis, was found a general status with good health conditions and presence of oral changes in about half of patients who composed the sample. The manifestations observed were, in decreasing order of frequency: mucositis; gingival alteration and thrombocytopenic purpura; mucosal pigmentation; lichenoid reaction and candidiasis. The oral changes were observed more frequently in cases of allogeneic TMO, in different periods post-transplant, without significant differences related to the source of cells. It was found statistically significant association between the presence of graft-versus-host disease (GVHD) and oral changes (p < 0,001). Therefore, it is concluded that there is a relatively high incidence of changes in oral cavity of patients receiving bone marrow transplantation, a fact which confirms the need to consider this site for examination, diagnosis, treatment and prognosis of possible complications of BMT

Exprassão imuno-histoquímica dos fatores de reabsorção óssea em lesões centrais e periféricas de células gigantes

The Giant Cell Lesions, both the Central Giant Cells Lesions (CGCL) as the Peripheral Giant Cells Lesions (PGCL), correspond to a group of oral lesions that are histologically similar entities; however they show a variable clinical behaviour. The purpose of this study was to compare the immunohistochemical expression of bone resorption factors RANK (Receptor Activator of Nuclear Factor kappa B), RANKL (Receptor Activator of Nuclear Factor kappa B Ligand) and OPG (Osteoprotegerin) between CGCL and PGCL. Additionally, these bone resorption factors were examined in terms of aggressiveness of these lesions. The sample consisted of 61 cases, 30 cases of PGCL and 31 CGCL (16 non-aggressive and 15 aggressive). The analysis was performed by quantification of mononuclear cells (MO) and giant multinucleated cells (CG) immunopositive to anti-RANK, anti-RANKL and anti-OPG antibodies in 10 fields. Moreover, according to the proportion between the amount of cells positive for RANKL and OPG, the cases were categorized into: RANKL>OPG, OPG>RANKL e RANKL=OPG. CGCL showed a higher amount of MO (p=0.002) and total cells (p=0.003) both positives to RANKL compared with the PGCL. Additionally, the CGCL revealed a significant association with the ratio of RANKL>OPG (p=0.001). Analysis of the bone resorption factors revealed no significant differences between aggressive and non-aggressive CGCL (p>0.05). It was observed a positive correlation between the markers themselves, and a negative correlation between lesion size and quantity of OPG positive MO cells (p=0,004) and total cells (p=0,009). Through these results, we suggest that the greatest CGCL resorptive potential compared to the PGCL, may have occurred to the high expression of RANKL. Furthermore differences in the biological behavior of aggressive and non-aggressive CGCL appear to be related to the expression of these bone resorption factors

Expressão imuno-histoquimica de proteínas relacionadas com a reabsorção óssea em carcinoma epidermoide de palato duro e língua

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Ecologia alimentar do boto cinza, sotalia guianensis (van banédén, 1864), no litoral do rio grande do norte (rn)

This study investigated factors that influence the group size during the behavior foraging of estuarine dolphin Sotalia guianensis in the coast south of the state Rio Grande do Norte (RN), it also characterized the diet of estuarine dolphins and elaborated an otoliths catalog for aid in the identification of the preys found in the stomach contents. In relation to the group size during behaviour foraging, inside of the Curral Bay, larger frequency of solitary hunt was observed. Factors as tide variation, group composition and seasons didn't present correlation with the number of animals observed during a feeding episode. Capture success for participant was shown significantly larger when the animals hunted alone, what possibly explains the largest frequency of solitary hunt inside of the Curral Bay. About diet, were identified 18 bone fishes species, with predominance of species the families Haemulidae and Sciaenidae and five cephalopods species, including two new species in the diet of Sotalia guianensis in Brazil. Our results indicated that estuarine dolphin in the coast oriental from Rio Grande do Norte (RN) feeds predominantly of fish that form shoal, of habitat estuarino and producing of sounds. The analysis of the images, otoliths of 43 species of coastal fish of the coast of the state of Rio Grande do Norte (RN), aided by the offered descriptions, demonstrated to be an effective methodology for the knowledge of those structures, as well as it represented a form of reducing the subjectivity in the identification of the bone fishes found in stomach content

Boto cinza (Sotalia guianensis, Van Benédén, 1864) (Cetacea, Delphinidae): Atividade aérea, forrageio e interações inter-específicas, na Praia de Pipa (Tibau do Sul RN) e estudo comparativo entre duas populações do Nordeste do Brasil

Sotalia guianensis is a small cetacean of the Delphinidae family, with coastal habits and whose area of distribution ranges from Florianópolis (27º35'S, 48º34'W), in Brazil, to Honduras (15º58'N, 85º42'W). At Pipa beach, on the south coast of RN state, in Brazil, the species occur throughout the year. The present study was carried out in two bays, which are bordered by cliffs. The animals were monitored from vantage points, using the "Ad libitum" and "all the occurrences" methods; during the years of 1999 and 2004. The study was divided in 4 chapters: Behavioral standards of two populations of gray dolphin, (Sotalia guianensis, Van Benédén, 1864) in the northeast of Brazil; Aerial activity of the gray dolphin: its possible function and the influence of environmental and behavioral factors; The influence of daily and monthly variation of the tides, of the period of the day and group size on the gray dolphin forage activity; kleptoparasitism interactions of frigatebird (Fregata magnificens, Mattheus, 1914) during the gray dolphin forage activity. The results have shown that the gray dolphin has a varied and complex behavioral repertoire. The leap is the most frequent behavior; the aerial activity is diffuse during daylight and is influenced by some factors, such as the level of the tide and social factors. The gray dolphin, when in the bay, most frequently feeds isolate or in small groups. The forage is diffuse during daylight; however, being more frequent in the morning and is influenced by the daily and monthly variation of the tide. At Pipa beach, kleptoparasitarian interactions were registered between the gray dolphin and the frigatebird (Fregata magnificens). The frigatebird forage strategy consists basically of two ways: to fly over great extensions searching for dead fish and to steal food (kleptoparasitism). These interactions were predominantly carried out between immature and female adult birds and adult and immature dolphins, and occurred during daylight. The present study can be considered an initial landmark to a better knowledge on the gray dolphin surface behavior, especially regarding the aerial behavioral repertoire and forage strategy of this species. However, it is necessary to continue these studies, so that we can understand better the complex social life of these animals and thus create effective measures for its conservation

Plasticidade de células tronco mesenquimais de medula óssea de ratos na presença de meio condicionado do nervo facial e do fator de crescimento fibroblástico 2

A number of evidences show the influence of the growth of injured nerve fibers in Peripheral Nervous System (PNS) as well as potential implant stem cells (SCs) to make it more suitable for nerve regeneration medium. In this perspective, this study aimed to evaluate the plasticity of mesenchymal stem cells from bone marrow of mice in the presence of culture medium conditioned with facial nerve explants (D-10) and fibroblast growth factor-2 (FGF-2). In this perspective, the cells were cultivated only with DMEM (group 1), only with D-10(group 2), only with FGF-2(group 3) or with D-10 and FGF-2(group 4). The growth and morphology were assessed over 72 hours. Quantitative phenotypic analysis was taken from the immunocytochemistry for GFAP, OX-42, MAP-2, β-tubulin III, NeuN and NF-200 on the fourth day of cultivation. Cells cultured with conditioned medium alone or combined with FGF-2 showed distinct morphological features similar apparent at certain times with neurons and glial cells and a significant proliferative activity in groups 2 and 4 throughout the days. Cells cultived only with conditioned medium acquired a glial phenotype. Cells cultured with FGF-2 and conditioned medium expressed GFAP, OX-42, MAP-2, β-tubulin III, NeuN and NF-200. On average, area and perimeter fo the group of cells positive for GFAP and the área of the cells immunostained for OX-42 were higher than those of the group 4. This study enabled the plasticity of mesenchymal cells (MCs) in neuronal and glial nineage and opened prospects for the search with cell therapy and transdifferentiation