Looking back : students' perceptions of the relative enjoyment of primary and secondary school science

This paper reports and discusses a contentious result from an Australia-wide study of the influences on students' decisions about taking senior science subjects. As part of the Choosing Science study (Lyons and Quinn 2010) 3759 Year 10 students were asked to indicate which stage of their schooling (lower primary, upper primary, lower secondary, middle secondary) they had most enjoyed learning science. Crosstabulations of responses revealed that around 78% of students indicated that they had enjoyed learning science more in secondary than in primary school, and 55% enjoyed it the most during Years 9 and 10. The perception that school science was more enjoyable in high school was also found among students who did not intend taking science in Year 11, though to a lesser extent. These findings are unexpected and significant, challenging the prevailing view that enjoyment of school science steadily declines after primary school. The paper elaborates on the findings and suggests that the different conclusions arrived at by studies in this field may be due to the different methodologies employed.

'It brings back too many memories' : Grantham haunted by floods

Flood waters came rushing back into Grantham over the weekend, two years after their community was devastated. It was too much for many residents, writes journalist Amanda Gearing from Grantham.

A bricoleur (or two) in the consulting room

In popular contemporary use, the French term bricolage refers to the activities of the home handyman. It is sometimes used in a disparaging way to refer to work that is improvised, uninformed by expertise or specialist knowledge, and probably inferior in its results when compared with the work of a tradesman or professional. In 1962, anthropologist and philosopher Claude Lévi-Strauss argued that bricolage is a modality of human thought. Since then, the importance of bricolage as a mental activity has been identified in relation to art and architecture, as well as other fields of cultural activity. In this paper I consider bricolage as an activity of the ego and explore its role in the consulting room. I argue that by necessity the psychoanalytic work undertaken between patient and analyst relies on this modality of thought and, furthermore, that the use of bricolage is entirely compatible with evidence-based practice.

Paired back

Research Statement from dancer: "This research is situated within my ongoing praxis, which explores the dancer’s role within the production of contemporary choreography through an elucidation of the first person perspective. This was a collaborative investigation with a group of artists and my specific research question focused upon the autopoietic unfolding of choreography and how the dancer is situated within this... " Research statement from choreographer: "This research is situated in the field of practice-led research, investigating choreographic practice. ‘The choreographic processes of many twentieth-century dance pioneers and innovators have been documented (Carter & O’Shea 2010; Foster 2010). In stark contrast, although seemingly primary to the act of choreography, the dancers’ experiences of the choreographic process have not been explored fully’ (Risner 2000, 156). The stock of choreographic literature is biased toward the choreographer-genius and the creative product (Penty 1998) and overlooks the dancer’s voice in the creative process (Risner 1992)..."

Back to the roots : mean-variance analysis of relevance estimations

Recently, mean-variance analysis has been proposed as a novel paradigm to model document ranking in Information Retrieval. The main merit of this approach is that it diversifies the ranking of retrieved documents. In its original formulation, the strategy considers both the mean of relevance estimates of retrieved documents and their variance. How- ever, when this strategy has been empirically instantiated, the concepts of mean and variance are discarded in favour of a point-wise estimation of relevance (to replace the mean) and of a parameter to be tuned or, alternatively, a quantity dependent upon the document length (to replace the variance). In this paper we revisit this ranking strategy by going back to its roots: mean and variance. For each retrieved document, we infer a relevance distribution from a series of point-wise relevance estimations provided by a number of different systems. This is used to compute the mean and the variance of document relevance estimates. On the TREC Clueweb collection, we show that this approach improves the retrieval performances. This development could lead to new strategies to address the fusion of relevance estimates provided by different systems.

Bouncing back : developing resilience

We always seem to hear about those dancers who are successful, but how do you cope when you don't get what you want? In life, we are often faced with situations where things don’t quite go to plan. We might not get the job we wanted, the grade we expected, the grant we applied for, or that long-dreamed of opportunity. What we make of these experiences shapes how we respond in the future to similar events...

Predicting freeway pavement construction cost using a back-propagation neural network : a case study in Henan, China

The objective of this research was to develop a model to estimate future freeway pavement construction costs in Henan Province, China. A comprehensive set of factors contributing to the cost of freeway pavement construction were included in the model formulation. These factors comprehensively reflect the characteristics of region and topography and altitude variation, the cost of labour, material, and equipment, and time-related variables such as index numbers of labour prices, material prices and equipment prices. An Artificial Neural Network model using the Back-Propagation learning algorithm was developed to estimate the cost of freeway pavement construction. A total of 88 valid freeway cases were obtained from freeway construction projects let by the Henan Transportation Department during the period 1994−2007. Data from a random selection of 81 freeway cases were used to train the Neural Network model and the remaining data were used to test the performance of the Neural Network model. The tested model was used to predict freeway pavement construction costs in 2010 based on predictions of input values. In addition, this paper provides a suggested correction for the prediction of the value for the future freeway pavement construction costs. Since the change in future freeway pavement construction cost is affected by many factors, the predictions obtained by the proposed method, and therefore the model, will need to be tested once actual data are obtained.

Will the new ABC Arts Council Win Back the Arts Community?

The ABC’s major arts announcement this month appears at first glance to be good news for one of its core constituencies. The national broadcaster will establish an Arts Council and will roll out several new arts programming initiatives. The Corporation’s relationship with the arts community has been strained in recent years, so the new programming initiatives should be greeted positively. But without significant new funding, coupled with the uncertainties of a looming federal budget, some commentators are seeing this as little more than a shuffling of the deckchairs.

Experimental and numerical analysis of the relationship between indoor and outdoor airborne particles in an operating room

This work investigated the impact of the HVAC filtration system and indoor particle sources on the relationship between indoor and outdoor airborne particle size and concentrations in an operating room. Filters with efficiency between 65% and 99.97% were used in the investigation and indoor and outdoor particle size and concentrations were measured. A balance mass model was used for the simulation of the impact of the surgical team, deposition rate, HVAC exhaust and air change rates on indoor particle concentration. The experimental results showed that high efficiency filters would not be expected to decrease the risk associated with indoor particles larger than approximately 1 µm in size because normal filters are relatively efficient for these large particles. A good fraction of outdoor particles were removed by deposition on the HVAC system surfaces and this deposition increased with particle size. For particles of 0.3-0.5 µm in diameter, particle reduction was about 23%, while for particles >10 µm the loss was about 78%. The modelling results showed that depending on the type of filter used, the surgical team generated between 93-99% of total particles, while the outdoor air contributed only 1-6%.

The first year experience : looking back to inform the future

The importance of the first year experience (FYE) to success at university has been a focus of attention in the Australian higher education sector since the 1990s. For students a successful transition into university during their first year is now regarded as crucial for student engagement, success and retention. In this review we summarise a decade of research into FYE in the Australasian context. We draw on the findings arising from this comprehensive review of FYE programs and practices to describe FYE trends through the dual lenses of the first year curriculum principles and the generational approach to FYE initiatives. We contend that the generational approach to conceptualising the FYE and first year student engagement has made a useful but limited contribution to our understanding of the first year experience. Acknowledging the criticality of student engagement in a successful FYE, we propose an alternative— the Student Engagement Success and Retention Maturity Model (SESR-MM)— as a sophisticated vehicle for achieving whole-of-institution approaches to the FYE. The SESR-MM embodies the aspirations and characteristics of the transition pedagogy, highlights the need for institutional level evaluation of the FYE, focuses attention on the capacity of institutions to mobilise for first year student engagement, and importantly builds on the generational approach to allow an assessment of institutional capacity to initiate, plan, manage, evaluate and review institutional FYE practices.

From prototype to exploitation : mobile services for patients with chronic lower back pain

Many research and development projects that are carried out by firms and research institutes are technology-oriented. There is a large gap between research results, for instance in the form of prototypes, and the actual service offerings to customers. This becomes problematic when an organization wants to bring the results from such a project to the market, which will be particularly troublesome when the research results do not readily fit traditional offerings, roles and capabilities in the industry, nor the financial arrangements. In this chapter, we discuss the design of a business model for a mobile health service, starting with a research prototype that was developed for patients with chronic lower back pain, using the STOF model and method. In a number of design sessions, an initial business model was developed that identifies critical design issues that play a role in moving from prototype toward market deployment. The business model serves as a starting-point to identify and commit relevant stakeholders, and to draw up a business plan and case. This chapter is structured as follows. We begin by discussing the need for mobile health business models. Next, the research and development project on mobile health and the prototype for chronic lower back pain patients are introduced, after which the approach used to develop the business model is described, followed by a discussion of the developed mobile health business model for each of the STOF domains. We conclude with a discussion regarding the lessons that were learned with respect to the development of a business model on the basis of a prototype.

Harnessing the influence of reactive edges and defects of graphene substrates for achieving complete cycle of room-temperature molecular sensing

Molecular doping and detection are at the forefront of graphene research, a topic of great interest in physical and materials science. Molecules adsorb strongly on graphene, leading to a change in electrical conductivity at room temperature. However, a common impediment for practical applications reported by all studies to date is the excessively slow rate of desorption of important reactive gases such as ammonia and nitrogen dioxide. Annealing at high temperatures, or exposure to strong ultraviolet light under vacuum, is employed to facilitate desorption of these gases. In this article, the molecules adsorbed on graphene nanoflakes and on chemically derived graphene-nanomesh flakes are displaced rapidly at room temperature in air by the use of gaseous polar molecules such as water and ethanol. The mechanism for desorption is proposed to arise from the electrostatic forces exerted by the polar molecules, which decouples the overlap between substrate defect states, molecule states, and graphene states near the Fermi level. Using chemiresistors prepared from water-based dispersions of single-layer graphene on mesoporous alumina membranes, the study further shows that the edges of the graphene flakes (showing p-type responses to NO2 and NH3) and the edges of graphene nanomesh structures (showing n-type responses to NO2 and NH3) have enhanced sensitivity. The measured responses towards gases are comparable to or better than those which have been obtained using devices that are more sophisticated. The higher sensitivity and rapid regeneration of the sensor at room temperature provides a clear advancement towards practical molecule detection using graphene-based materials.

Inactivation of a 25.5 µm Enterococcus faecalis biofilm by a room-temperature, battery-operated, handheld air plasma jet

Effective biofilm inactivation using a handheld, mobile plasma jet powered by a 12 V dc battery and operated in open air without any external gas supply is reported. This cold, room-temperature plasma is produced in self-repetitive nanosecond discharges with current pulses of ~100 ns duration, current peak amplitude of ~6 mA and repetition rate of ~20 kHz. It is shown that the reactive plasma species penetrate to the bottom layer of a 25.5 µm-thick Enterococcus faecalis biofilm and produce a strong bactericidal effect. This is the thickest reported biofilm inactivated using room-temperature air plasmas.

Room-temperature photoluminescence from nitrogenated carbon nanotips grown by plasma-enhanced hot filament chemical vapor deposition

Nitrogenated carbon nanotips with a low atomic concentration of nitrogen have been synthesized by using a custom-designed plasma-enhanced hot-filament plasma chemical vapor deposition system. The properties (including morphology, structure, composition, photoluminescence, etc.) of the synthesized nitrogenated carbon nanotips are investigated using advanced characterization tools. The room-temperature photoluminescence measurements show that the nitrogenated carbon nanotips can generate two distinct broad emissions located at ∼405 and ∼507 nm, respectively. Through the detailed analysis, it is shown that these two emission bands are attributed to the transition between the lone pair valence and bands, which are related to the sp3 and sp2 C-N bonds, respectively. These results are highly relevant to advanced applications of nitrogenated carbon nanotips in light emitting optoelectronic devices.

Room-temperature, atmospheric plasma needle reduces adenovirus gene expression in HEK 293A host cells

Room-temperature, atmospheric-pressure plasma needle treatment is used to effectively minimize the adenovirus (AdV) infectivity as quantified by the dramatic reduction of its gene expression in HEK 293A primary human embryonic kidney cells studied by green fluorescent protein imaging. The AdV titer is reduced by two orders of magnitude within only 8 min of the plasma exposure. This effect is due to longer lifetimes and higher interaction efficacy of the plasma-generated reactive species in confined space exposed to the plasma rather than thermal effects commonly utilized in pathogen inactivation. This generic approach is promising for the next-generation anti-viral treatments and imunotherapies.