Biodiesel de buriti em trator: desempenho em função do tipo de diesel e da proporção de mistura na operação de preparo do solo

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Desenvolvimento e aplicação da instrumentação virtual na unidade móvel de ensaios na barra de tração - UMEB

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Cana-de-açúcar em bacias hidrográficas experimentais irrigadas

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Manejo da fertirrigação e salinidade do solo no crescimento da cultura da beterraba

With the increase in world population and scarcity of natural resources, efficient use of fertilizers becomes necessary for intensive agriculture. The experiment was conducted in a greenhouse at the Department of Agricultural Engineering, UNESP in Botucatu-SP. The treatments were derived from the combination of the soil salinity (E.C: 1.0, 3.0, 6.0, 9.0 and 12.0 dS m-1), Fertigation management (M1 =traditional and M2 = with control of the ionic concentration of the soil solution) and beet cultivars (C1= Early Wonder and C2 = Itapuã) in a 5x2x2 factorial design with four replications in a randomized block design. Throughout the cultivation, the following variables were evaluated: height, stem diameter, length and diameter of plant roots. The height of the plant presented differently according to the Fertigation management and sensitive to levels of electrical conductivity in the soil. The diameter of the roots showed reductions of 3.55 and 2.48 mm for C1 and C2, respectively, every unit increase in electrical conductivity (EC) to M1. Based on the functional relationship of the best adjustment between the diameter of the roots and electrical conductivity in M2 gave an estimated maximum diameter of 90.78 mm to 94.67 mm for C1 and C2.

Custos energéticos do agroecossistema pinhão-manso e milho: comparativo entre o sistema de condução sequeiro e o irrigado

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Produção da cultura da beterraba irrigada com água salina.,

The use of low quality water for agriculture should be performed with care to avoiding excessive accumulation of salts in the soil so not to harm crop development. In order to evaluate the performance of beets under the infl uence of low water quality, an experiment was conducted in a greenhouse of the Department of Agricultural Engineering, Universidade Estadual Paulista in Botucatu, Brazil, from April to July 2012. We used the beet (Beta vulgaris L.) in a completely randomized design with 6 treatments and 5 replications, totaling 30 plots. Treatments consisted of NaCl solutions at different concentrations (2.0, 3.0, 4.0, 5.0 and 6.0 dS m-1) plus a control treatment corresponding to water with no additional salt and electrical conductivity of roughly 0.26 dS m-1. Variables evaluated were total production, commercial production, plant height, number of plants and root diameter. Production of the beet crop was affected by the increasing salinity of irrigation water, characterized by reduced root production of the beets. Total and commercial production showed reductions of 8.82 and 12.2% in accordance with the unit increase of salinity.

Absorção de micronutrientes em plantas de pimentão submetidas a diferentes lâminas de irrigação

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

RB32-266 Cooling Milk on Nebraska Farms

The desire of Nebraska people to continue the improvement of living conditions and to secure more healthful foods has been responsible for many changes in methods of caring for milk. One of the important factors in keeping milk sweet and of good quality is the process of cooling and keeping it cool until used. Three of these processes are as follows: placing containers of warm milk in any quantity of still water or still air at temperatures ranging from freezing to within a few degrees of the temperature of the milk, placing the containers in such positions that air or water are circulated around them, and causing the milk to flow in such manner that a thin film comes in contact with a surface which is cooled by air or liquids varying in temperature from 10 degrees Fahrenheit to a few degrees below that of the milk. After some of the heat has been removed the milk is stored under conditions very similar to those found in cooling processes. This 1932 research bulletin discusses why milk is cooled, why milk sours, how bacteria grows, and the many ways that milk can be cooled.

EC27-811 Harvesting Wheat in Nebraska with the Combined Harvester Thresher 1926

Frequent inquiry from wheat growers in Nebraska and others as to the relative merits of the combined harvester-thresher as an efficienct and economical harvesting machine led the Nebraska Agricultural College to make a study of this problem in the summer of 1926. The work was carried on by the Departments of Rural Economics and Agricultural Engineering, cooperating with the United States Department of Agriculture which was conducting a similar survey in different parts of the United States. Perkins county, Nebraska, was the area selected for study as it is more or less typical of those parts of the state where combines are used extensively. The purpose of this circular is merely to give such informaition as is available regarding harvesting costs by different methods in Nebraska and not to recommend one method over another since location, acreage, climatic conditions, and topopgraphy all have their influence in determining the most economic method for different communities.

Role of Branching on the Structure of Polymer Brushes Formed from Comb Copolymers

The distinguishing feature of a polymer brush at equilibrium is the stretched configuration of the chains that results from tethering the polymer chains by one end at the solid-fluid interface. The stretched configuration of the chains and the crowded nature of the interfacial layer is the origin of many of the useful properties of polymer brushes: these layers resist compression and aggregation, effectively dissipate shear stresses, and respond reversibly to changes in their solution environment.

Differences between Tethered Polyelectrolyte Chains on Bare Mica and Hydrophobically Modified Mica

This study investigates the structures of layers of amphiphilic diblock copolymers of poly(t-butyl styrene)-poly- (styrene sulfonate) (PtBS-PSS) adsorbed on both the bare mica surface (hydrophilic) and an octadecyltriethoxysilane (OTE)-modified mica surface (hydrophobic). When the surface is rendered hydrophobic, the nonsoluble block exhibits stronger interaction with the surface and higher adsorbed masses are achieved. Interaction forces between two such adsorbed layers on both substrates were measured using the surface forces apparatus. The effect of salt concentration (Cs) and molecular weight (N) on the height of the self-assembled layers (L0) was examined in each case. The resulting scaling relationship is in good agreement with predictions of the brush model, L0 ∞ N1.0 in the low-salt limit and L0N-1 ∞ (Cs/σ)-0.32 in the salted regime, when adsorption takes place onto the hydrophobized mica surface. For adsorption on the bare mica surface, L0N-0.7 ∞ Cs -0.17 agrees with the scaling prediction of the sparse tethering model. The results suggest that, on the hydrophilic bare mica surface, the adsorbed amount is not high enough to form a brush structure and only very little intermolecular stretching of the tethered chains occurs; in contrast, the presence of the hydrophobic OTE layer increases the tethering density such that the polyelectrolyte chains adopt a brush conformation.

Enhanced Polymer Grafting from Multiwalled Carbon Nanotubes through Living Anionic Surface-Initiated Polymerization

Anionic surface-initiated polymerization of ethylene oxide and styrene has been performed using multiwalled carbon nanotubes (MWNTs) functionalized with anionic initiators. The surface of MWNTs was modified via covalent attachment of precursor anions such as 4-hydroxyethyl benzocyclobutene (BCBEO) and 1-benzocyclobutene-1′-phenylethylene (BCB-PE) through Diels-Alder cycloaddition at 235 °C. Surface-functionalized MWNTs-g-(BCB-EO) n and MWNTs-g-(BCB-PE) n with 23 and 54 wt % precursor initiators, respectively, were used for the polymerizations. Alkoxide anion on the surface of MWNTs-g-(BCB-EO) n was generated through reaction with potassium triphenylmethane for the polymerization of ethylene oxide in tetrahydrofuran and phenyl substituted alkyllithium was generated from the surface of MWNTs-g-(BCB-PE) n using sec-butyllithium for the polymerization of styrene in benzene. In both cases, the initiation was found to be very slow because of the heterogeneous reaction medium. However, the MWNTs gradually dispersed in the reaction medium during the polymerization. A pale green color was noticed in the case of ethylene oxide polymerization and the color of initiator as well as the propagating anions was not discernible visually in styrene polymerization. Polymer grafted nanocomposites, MWNTs-g-(BCB-PEO) n and MWNTs-g-(BCB-PS) n containing a very high percentage of hairy polymer with a small fraction of MWNTs (<1 wt %) were obtained. The conversion of ethylene oxide and the weight percent of PEO on the surface of the MWNTs increased with increasing reaction time indicating a controlled polymerization. The polymer-grafted MWNTs were characterized using FTIR, 1H NMR, Raman spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and transmission electron microscopy (TEM). Size exclusion chromatography of the polymer grafted MWNTs revealed broad molecular weight distributions (1.3 < Mw/Mn < 1.8) indicating the presence of different sizes of polymer nanocomposites. The TEM images showed the presence of thick layers of polymer up to 30 nm around the MWNTs. The living nature of the growing polystyryllithium was used to produce diblock copolymer grafts using sequential polymerization of isoprene on the surface of MWNTs.

Controlled Covalent Functionalization of Multiwalled Carbon Nanotubes using [4 + 2] Cycloaddition of Benzocyclobutenes

Surface modification of carbon nanotubes (CNTs) through covalent functionalization is vital for the development of high-performance composite materials, chemosensors, nanoelectronics, photovoltaic devices, as well as for a range of biomedical applications. Several methods have been developed to functionalize CNTs. The introduction of acid groups by acid digestion disrupts the structural integrity of CNTs. Apart from shortening the tubes, oxidatively generated acid groups are inhomogenously located at the tips of broken CNTs and, hence, functionalization using acid groups as precursors does not give a statistical distribution of functional groups throughout the surface of the CNTs.

Ellipsometric Study of Single-Crystal γ-Inse From 1.5 To 9.2 Ev

We report the component E ┴ c of the pseudodielectric-function tensor <ε(E)> = <ε1(E)> + i< ε2(E)> of γ-phase single-crystal InSe, obtained from 1.5 to 9.2 eV by vacuum-ultraviolet spectroscopic ellipsometry with the sample at room temperature. Overlayer artifacts were reduced as far as possible by measuring fresh surfaces prepared by cleavage. Accurate critical-point energies of observed structures were obtained by a combined method of spectral analysis.

Report of the Poplar Working Group

Poplars consist of all species of the genus Populus, including cottonwoods, aspens, and the many interspecies hybrids in common use (Dickmann and Stuart 1983). Our working group focused on the fungal pathogens, arthropod herbivores, and weed competitors of Populus in the United States. However, bacterial and viral diseases of Populus are significant in Europe, and genetic engineering approaches toward their control or management are being studied. The key aspects of poplar biology important to understanding the use of pest resistance genes are described below.