Developing a reliable strategy to infer the effective soil hydraulic properties from field evaporation experiments for agro-hydrological models

The Richards equation has been widely used for simulating soil water movement. However, the take-up of agro-hydrological models using the basic theory of soil water flow for optimizing irrigation, fertilizer and pesticide practices is still low. This is partly due to the difficulties in obtaining accurate values for soil hydraulic properties at a field scale. Here, we use an inverse technique to deduce the effective soil hydraulic properties, based on measuring the changes in the distribution of soil water with depth in a fallow field over a long period, subject to natural rainfall and evaporation using a robust micro Genetic Algorithm. A new optimized function was constructed from the soil water contents at different depths, and the soil water at field capacity. The deduced soil water retention curve was approximately parallel but higher than that derived from published pedo-tranfer functions for a given soil pressure head. The water contents calculated from the deduced soil hydraulic properties were in good agreement with the measured values. The reliability of the deduced soil hydraulic properties was tested in reproducing data measured from an independent experiment on the same soil cropped with leek. The calculation of root water uptake took account for both soil water potential and root density distribution. Results show that the predictions of soil water contents at various depths agree fairly well with the measurements, indicating that the inverse analysis is an effective and reliable approach to estimate soil hydraulic properties, and thus permits the simulation of soil water dynamics in both cropped and fallow soils in the field accurately. (C) 2009 Elsevier B.V. All rights reserved.

Development of the Surface Urban Energy and Water balance Scheme (SUEWS) for cold climate cities

The Surface Urban Energy and Water Balance Scheme (SUEWS) is developed to include snow. The processes addressed include accumulation of snow on the different urban surface types: snow albedo and density aging, snow melting and re-freezing of meltwater. Individual model parameters are assessed and independently evaluated using long-term observations in the two cold climate cities of Helsinki and Montreal. Eddy covariance sensible and latent heat fluxes and snow depth observations are available for two sites in Montreal and one in Helsinki. Surface runoff from two catchments (24 and 45 ha) in Helsinki and snow properties (albedo and density) from two sites in Montreal are also analysed. As multiple observation sites with different land-cover characteristics are available in both cities, model development is conducted independent of evaluation. The developed model simulates snowmelt related runoff well (within 19% and 3% for the two catchments in Helsinki when there is snow on the ground), with the springtime peak estimated correctly. However, the observed runoff peaks tend to be smoother than the simulated ones, likely due to the water holding capacity of the catchments and the missing time lag between the catchment and the observation point in the model. For all three sites the model simulates the timing of the snow accumulation and melt events well, but underestimates the total snow depth by 18–20% in Helsinki and 29–33% in Montreal. The model is able to reproduce the diurnal pattern of net radiation and turbulent fluxes of sensible and latent heat during cold snow, melting snow and snow-free periods. The largest model uncertainties are related to the timing of the melting period and the parameterization of the snowmelt. The results show that the enhanced model can simulate correctly the exchange of energy and water in cold climate cities at sites with varying surface cover.

Modeling plant transpiration under limited soil water: comparison of different plant and soil hydraulic parameterizations and preliminary implications for their use in land surface models

Accurate estimates of how soil water stress affects plant transpiration are crucial for reliable land surface model (LSM) predictions. Current LSMs generally use a water stress factor, β, dependent on soil moisture content, θ, that ranges linearly between β = 1 for unstressed vegetation and β = 0 when wilting point is reached. This paper explores the feasibility of replacing the current approach with equations that use soil water potential as their independent variable, or with a set of equations that involve hydraulic and chemical signaling, thereby ensuring feedbacks between the entire soil–root–xylem–leaf system. A comparison with the original linear θ-based water stress parameterization, and with its improved curvi-linear version, was conducted. Assessment of model suitability was focused on their ability to simulate the correct (as derived from experimental data) curve shape of relative transpiration versus fraction of transpirable soil water. We used model sensitivity analyses under progressive soil drying conditions, employing two commonly used approaches to calculate water retention and hydraulic conductivity curves. Furthermore, for each of these hydraulic parameterizations we used two different parameter sets, for 3 soil texture types; a total of 12 soil hydraulic permutations. Results showed that the resulting transpiration reduction functions (TRFs) varied considerably among the models. The fact that soil hydraulic conductivity played a major role in the model that involved hydraulic and chemical signaling led to unrealistic values of β, and hence TRF, for many soil hydraulic parameter sets. However, this model is much better equipped to simulate the behavior of different plant species. Based on these findings, we only recommend implementation of this approach into LSMs if great care with choice of soil hydraulic parameters is taken

Sensitivity of a coupled climate model to canopy interception capacity

The canopy interception capacity is a small but key part of the surface hydrology, which affects the amount of water intercepted by vegetation and therefore the partitioning of evaporation and transpiration. However, little research with climate models has been done to understand the effects of a range of possible canopy interception capacity parameter values. This is in part due to the assumption that it does not significantly affect climate. Near global evapotranspiration products now make evaluation of canopy interception capacity parameterisations possible. We use a range of canopy water interception capacity values from the literature to investigate the effect on climate within the climate model HadCM3. We find that the global mean temperature is affected by up to -0.64 K globally and -1.9 K regionally. These temperature impacts are predominantly due to changes in the evaporative fraction and top of atmosphere albedo. In the tropics, the variations in evapotranspiration affect precipitation, significantly enhancing rainfall. Comparing the model output to measurements, we find that the default canopy interception capacity parameterisation overestimates canopy interception loss (i.e. canopy evaporation) and underestimates transpiration. Overall, decreasing canopy interception capacity improves the evapotranspiration partitioning in HadCM3, though the measurement literature more strongly supports an increase. The high sensitivity of climate to the parameterisation of canopy interception capacity is partially due to the high number of light rain-days in the climate model that means that interception is overestimated. This work highlights the hitherto underestimated importance of canopy interception capacity in climate model hydroclimatology and the need to acknowledge the role of precipitation representation limitations in determining parameterisations.

Evaluation of water properties in HEA–HEMA hydrogels swollen in aqueous-PEG solutions using thermoanalytical techniques

Hydrogels are polymeric materials used in many pharmaceutical and biomedical applications due to their ability to form 3D hydrophilic polymeric networks, which can absorb large amounts of water. In the present work, polyethylene glycols (PEG) were introduced into the hydrogel liquid phase in order to improve the mechanical properties of hydrogels composed of 2-hydroxyethylacrylate and 2-hydroxyethylmethacrylate (HEA–HEMA) synthesized with different co-monomer compositions and equilibrated in water or in 20 % water–PEG 400 and 600 solutions. The thermoanalytical techniques [differential scanning calorimetry (DSC) and thermogravimetry (TG)] were used to evaluate the amount and properties of free and bound water in HEA–HEMA hydrogels. The internal structure and the mechanical properties of hydrogels were studied using scanning electron microscopy and friability assay. TG “loss-on-drying” experiments were applied to study the water-retention properties of hydrogels, whereas the combination of TG and DSC allowed estimating the total amount of freezable and non-freezing water in hydrogels. The results show that the addition of viscous co-solvent (PEG) to the liquid medium results in significant improvement of the mechanical properties of HEA–HEMA hydrogels and also slightly retards the water loss from the hydrogels. A redistribution of free and bound water in the hydrogels equilibrated in mixed solutions containing 20 vol% of PEGs takes place.

Leaf trapping and retention of particles by holm oak and other common tree species in Mediterranean urban environments

Holm oak (Quercus ilex), a widespread urban street tree in the Mediterranean region, is widely used as biomonitor of persistent atmospheric pollutants, especially particulate-bound metals. By using lab- and field-based experimental approaches, we compared the leaf-level capacity for particles’ capture and retention between Q. ilex and other common Mediterranean urban trees: Quercus cerris, Platanus × hispanica, Tilia cordata and Olea europaea. All applied methods were effective in quantifying particulate capture and retention, although not univocal in ranking species performances. Distinctive morphological features of leaves led to differences in species’ ability to trap and retain particles of different size classes and to accumulate metals after exposure to traffic in an urban street. Overall, P. × hispanica and T. cordata showed the largest capture potential per unit leaf area for most model particles (Na+ and powder particles), and street-level Cu and Pb, while Q. ilex acted intermediately. After wash-off experiments, P. × hispanica leaves had the greatest retention capacity among the tested species and O. europaea the lowest. We concluded that the Platanus planting could be considered in Mediterranean urban environments due to its efficiency in accumulating and retaining airborne particulates; however, with atmospheric pollution being typically higher in winter, the evergreen Q. ilex represents a better year-round choice to mitigate the impact of airborne particulate pollutants.

Phenolic matrices and sisal fibers modified with hydroxy terminated polybutadiene rubber: Impact strength, water absorption, and morphological aspects of thermosets and composites

The aim of the present work was to investigate the toughening of phenolic thermoset and its composites reinforced with sisal fibers, using hydroxyl-terminated polybutadiene rubber (HTPB) as both impact modifier and coupling agent. Substantial increase in the impact strength of the thermoset was achieved by the addition 10% of HTPB. Scanning electron microscopy (SEM) images of the material with 15% HTPB content revealed the formation of some rubber aggregates that reduced the efficiency of the toughening mechanism. In composites, the toughening effect was observed only when 2.5% of HTPB was added. The rubber aggregates were found located mainly at the matrix-fiber interface suggesting that HTPB could be used as coupling agent between the sisal fibers and the phenolic matrix. A composite reinforced with sisal fibers pre-impregnated with HTPB was then prepared; its SEM images showed the formation of a thin coating of HTPB on the surface of the fibers. The ability of HTBP as coupling agent between sisal fibers and phenolic matrix was then investigated by preparing a composite reinforced with sisal fibers pre-treated with HTPB. As revealed by its SEM images, the HTPB pre-treatment of the fibers resulted on the formation of a thin coating of HTPB on the surface of the fibers, which provided better compatibility between the fibers and the matrix at their interface, resulting in a material with low water absorption capacity and no loss of impact strength. (C) 2009 Elsevier B.V. All rights reserved.

Impact of ripening stages of banana flour on the quality of extruded products

The study investigated the physical, nutritional and sensory properties of different ripening stages of banana during extrusion processing in combination with rice flour to develop quality snack products. Dehydrated banana flours at ripening stages 4, 5 and 6 (peel colour) were mixed separately at 40% banana to 60% rice flour levels. The mixtures were extruded through a twin-screw extruder at 120 °C barrel temperature, 220 and 260 r.p.m, screw speed and 12% feed moisture. Increase in ripeness indicated negative effect on expansion and water absorption capacity while increasing the water solubility index and moisture retention (wet basis) of the products. Protein and mineral (except for zinc and copper) content of the products were significantly different (P < 0.05) from 4 to 6 of the ripening stages. Most of the essential amino acids in the extruded products increased significantly (P < 0.05) at the ripening stage of 6. All the products were within the acceptable range in the 9-point Hedonic scale showing the best texture and flavour scores for stage 4 and 6, respectively. The extruded products show potential as snack products because of their nutritional quality and sensory acceptability.

Alternative water strategies in public domains : innovative strategies in progress along North Terrace, Adelaide

Water sensitive design on our urban threshold is increasingly becoming topical. In Adelaide it is being driven by stormwater management strategies and economic efficiencies in a city that is beginning to embrace its Mediterranean environment, low water sustainability, and whether our showpiece public domains in Adelaide can afford large expanses of manicured lawns.

This paper reviews four projects in progress along the North Terrace in Adelaide. The first involves a major redesign of First Creek as it traverses Adelaide Botanic Garden to address stormwater management issues. The redesign includes strategies to control flash flooding, to cleanse stream water from pollutants, and to carefully incorporate a wetland system as an integral botanical and horticultural feature of a botanic garden. Further down North Terrace, the University of Adelaide is evaluating a scenario that will totally redesign Goodman Crescent, its picture-postcard promenade lawn. The scenario is to host an integrated water retention and water purification and cleansing system that will service independently of mains water an irrigation system and a waterfall. The proposal draws upon a similar strategy recently adopted by the South Australian Museum to capture and cleanse surface and roof water but place the installation and process on display as part of its overall biodiversity museum display that will unfold over the next five years under director Tim Flannery. The fourth example, in process at present, is to devise an integrated water system that may enable the Government House grounds to remove itself from dependence upon costly mains water to totally sustain its extensive gardens and lawns.

Importantly each project has similar threads: creative water maximization and purification use, and a desire to place these ‘installations’ on display as public statements of their commitment to water sustainability in Adelaide. But radically, here are four prominent cultural institutions readily willing to redefine the notion and traditional visual imagery of a ‘wetland’ on what is the main cultural boulevard of a capital city.

Dinâmica da água no solo em cultivos de milho sob plantio direto e preparo convencional

A dinâmica da água em sistema de plantio direto (PD) é alterada em relação ao preparo convencional (PC) devido a modificações na estrutura do solo e a presença de palha na superfície. Para avaliar estas diferenças foram conduzidos experimentos de campo, em 2001/02 e 2002/03, em Eldorado do Sul, RS. O objetivo geral foi quantificar alterações físico-hídricas no perfil e na superfície do solo em PD e PC, com ênfase na dinâmica da água e respostas das plantas de milho. Os sistemas de manejo do solo foram implantados na área em 1995. Foram avaliadas propriedades físicas, a movimentação e a armazenagem de água no solo. Mediu-se a infiltração e a capacidade de campo e monitorou-se a dinâmica da água durante o ciclo da cultura, enfocando a secagem do solo e a extração de água em períodos sem precipitação. Nestes períodos também foi determinada a evaporação da água na superfície e avaliadas respostas das plantas. Os efeitos do plantio direto se evidenciaram nas camadas de solo próximas à superfície. A mesoporosidade foi a propriedade física mais afetada, apresentando uma distribuição exponencial de mesoporos no plantio direto, enquanto no preparo convencional a mesma se aproximou de uma curva normal. Em geral, a condutividade hidráulica, a retenção e a disponibilidade de água foram mais elevadas em plantio direto, principalmente, próximo à superfície. O solo em PD também apresentou maior umidade volumétrica com menor energia de retenção, resultando em redução no avanço da frente de secagem do solo e extração de água. A evaporação também foi maior em PD, demonstrando que a maior umidade no solo em plantio direto se deve ao aumento na capacidade de armazenagem de água. O aprofundamento radicular foi sempre maior no preparo convencional. O plantio direto altera propriedades físicas ligadas à dinâmica da água, proporcionando maior disponibilidade hídrica no solo ao longo do tempo.

Desenvolvimento de argamassa para restauração utilizando resíduo do polimento do porcelanato

The coatings mortars are essential elements of building structures because they execute an important role in protecting walls and are particularly exposed to aggressive action responsible for its degradation over time. The importance of wall coverings has been the subject of discussion and analysis in the conservation and rehabilitation of old buildings. Are sometimes removed and replaced with inappropriate solutions of constructive point of view or architecture. The most commonly used coatings on walls of old buildings is based on traditional hydraulic lime mortars. The present study aims at the formulation of new lime- based mortars and aerial fine aggregate, in order to contribute to a better field of conservation and restoration mortar coating of old buildings. Residue was used for polishing porcelain as fine aggregate, replacing the aggregate (sand), in percentages 05-30% by mass. We conducted a thorough evaluation of the mortar properties in fresh and hardened state by comparing the performance of the same with a reference mortar. The residue used was characterized as the density, bulk density, and particle size laser, scanning electron microscopy, X-ray diffraction and X-ray fluorescence. Formulations were produced 7, 6 with residue and one commonly used formulation, which served as a reference. In the formulations of lime mortars air (hydrated lime powder CH-I) has been adopted a stroke volume (1:3) with constant binder, was varied and the water / binder and aggregate and waste. For evaluation of mortars fresh, proceeded to consistency analysis, specific gravity, water retention and air content embedded. In the hardened state assays were performed in specific gravity, water retention, modulus of elasticity, tensile strength in bending, compressive strength, water absorption by capillary action, adhesion, tensile strength, resistance to shrinkage and salts by of crystallization trials with resources chloride solution, nitrate and sulfate all sodium in prismatic at 90 days of age, in addition to the micro structural analysis of mortars. Based on the results we can see that the mortar formulated with 10% content of waste and the reference free retraction feature more stable closer to neutrality. The composition of 10% was obtained better performance against the action of the salt crystallization. The mortar with 15% residue obtained better density, lower air content embedded and high capacity for water retention developing good workability. The replacement of 20% of waste generates a satisfactory utilization of resistance to compression, flexion and traction grip the base. And, finally, it can be seen that the mortar with 10, 15 and 20% residual show, in principle, good suitability as coatings, thus enabling a final result consistent with durability, workability and aesthetics developing therefore a material with better performance to repair or replace existing mortars in old buildings

Measurement systems of soil water matric potential and evaluation of soil moisture under different irrigation depths

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Substrate and Temperature Effects on the Germination of Dypsis leptocheilos (Hodel) Beentje & J. Dransf. (Arecaceae) Seeds

Dypsis leptocheilos is highly valued as an ornamental palm. Its propagation is done by seeds; however, there is little information about this process. The objective of this work was to study the substrate and temperature effects on the germination of D. leptocheilos seeds. The experiments were carried out at FCAV/UNESP, Campus of Jaboticabal, São Paulo State, Brazil. In order to study the substrate effects, four treatments were arranged (coconut fiber, sand, vermiculite and Plantmax (R)) at 30 degrees C. For the temperature effects, six treatments were performed (temperature at laboratory conditions (21.5 degrees C and 72% RU), 25 degrees C, 30 degrees C, 35 degrees C, 20-30 degrees C and 25-35 degrees C), having the coconut fiber as the substrate. The experimental design was completely randomized, with four replicates of 25 disseminules per plot (seeds with attached endocarp). Water replacement was managed to maintain 100% of the retention capacity of the substrates. The germination tests were observed every two days, and conducted over 148 days for the substrate effects, and over 152 days for the temperature effects, when no more seed germination was noted. In order to determine the germination percentage (% G) and the Germination Speed Index (GSI), the seed was considered germinated when the germinative button appeared. At the end of the experiments, leaf area (cm(2)), root and shoot length (cm), root and shoot dry mass (g) were also obtained. Statistical analysis was performed and means were compared by the Tukey test. Germination rate and speed in coconut fiber was higher at 25 and 30 degrees C. However, when other substrates were tested at 30 degrees C, the highest germination percentage was observed in vermiculite, which also sustained better results for the seed germination and for the characteristics related to shoots and roots.

Qualidade física de um latossolo vermelho férrico sob sistemas de uso e manejo

The soil physical quality is defined as the soil capacity to maintain the sustainable productivity during the years. To assess soil physical quality, attributes were evaluated in the layers of 0.0-0.10, 0.10-0.20, 0.20-0.30, 0.30-0.40 m in acrustox. The experimental design was entirely randomized, with four systems of use ( corn, sugar-cane, pasture and native vegetation), four soil depths and four replications. The parameter evaluated were: texture, degree of clay flocculation, soil bulk density, porosity, water retention and "S" parameter. The usage and management systems caused soil physical degradation, being greater in pasture system with intensive usage, with smaller soil physical quality for plants development. The soil physical quality, evaluated by physical attributes, followed the following order: native vegetation > maize > sugar-cane > pasture. The Oxisol, although shows present excellent physical structure and needs an adequate management to prevent excessive compaction.

Water balance in goats subjected to feed restriction

The effect of feed restriction on water balance and nutrient utilization was investigated in individually penned Boer x Saanen kids. Twenty-two male Boer x Saanen kids with an initial average live weight (LW) of 15 kg were used. Seven kids were slaughtered at the beginning of the experiment (reference animals) and the remainders were allocated to one of the three treatments (0, 30 and 60% restriction) and therefore there were five kids per treatment. The feed intake for the 0% restriction treatment animals determined the intake for the animals in the 30 and 60% restriction treatment. When the animals in the 0% restriction treatment group reached 25 kg LW, the animals in the 30 and 60% restriction treatment groups were also slaughtered. There was a negative relationship between DMI and water intake. The digestibility coefficients for DM, OM, carbohydrates, ash, ether extract, energy, NDF, ADF and lignin did not differ between treatments, whereas the digestibility coefficient for CP was different between treatment groups. The highest metabolic water production was in animals in the 0% restriction treatment group. No significant differences were observed in the composition of gastro-intestinal tract contents of the goats in the different treatments. Lower water retention was found in the animals in the 60% restriction treatment group. The study showed that feed restriction affected water intake, CP digestibility and water retention in the body of the kid goats. This experiment demonstrated that DM:water intake ratio changed when severe feed restriction was applied (60% restriction) and water was freely available. It shows a different pattern of behaviour of penned goats, particularly if feed intake is restricted and perhaps caution is needed to extrapolate results from nutritional and physiological trials in pens to goats at pasture. (c) 2005 Elsevier BX All rights reserved.