1000 resultados para Termos equivalentes
Resumo:
Through this research is detailed the Brazilian seismic code focused on concrete projects design related to seismic engineering. At the beginning of the research is debated the fundaments of the seismic effects, the influence factors to the development of seismic effects and also relates the main data registration happened in Brazil. The second step is study the Brazilian seismic code explaining all the concepts related to it and does a compilation to the most important international seismic code. At this research is developed the designing of a building submitted to horizontal equivalent seismic forces and the modal process based on the answer spectrum based on the brazilin seismic code. It was also developed the design of a commercial building submitted to seismic loads based on the Brazilian code answer spectrum and compared to the same building submitted to wind loads.The research also focus on projects conception and detailing of seismic engineering Project design. At the study of seismic engineering it was concluded that seismic effects require special focus on concrete structures design, proving that is the essential consider the seismic effects
Resumo:
At present, the electricity generation through wind energy has an importance growing in the world, with the existence of very large plans for future wind power installation worldwide. Thus, the increasing the electricity generation through wind power requires, more and more, analysis of studies of interaction between wind parks and electric power systems. This paper has as purposes to implement equivalent models for synchronous wind generators to represent a wind park in ATP program and to check behavior of the models through simulations. Simulations with applications of faults were achieved to evaluate the behavior of voltages of system for each equivalent model, through comparisons between the results of models proposed, to verify if the differences obtained allows the adoption of the simplest model
Resumo:
The aim of the present study was to extract vegetable oil from brown linseed (Linum usitatissimum L.), determine fatty acid levels, the antioxidant capacity of the extracted oil and perform a rapid economic assessment of the SFE process in the manufacture of oil. The experiments were conducted in a test bench extractor capable of operating with carbon dioxide and co-solvents, obeying 23 factorial planning with central point in triplicate, and having process yield as response variable and pressure, temperature and percentage of cosolvent as independent variables. The yield (mass of extracted oil/mass of raw material used) ranged from 2.2% to 28.8%, with the best results obtained at 250 bar and 50ºC, using 5% (v/v) ethanol co-solvent. The influence of the variables on extraction kinetics and on the composition of the linseed oil obtained was investigated. The extraction kinetic curves obtained were based on different mathematical models available in the literature. The Martínez et al. (2003) model and the Simple Single Plate (SSP) model discussed by Gaspar et al. (2003) represented the experimental data with the lowest mean square errors (MSE). A manufacturing cost of US$17.85/kgoil was estimated for the production of linseed oil using TECANALYSIS software and the Rosa and Meireles method (2005). To establish comparisons with SFE, conventional extraction tests were conducted with a Soxhlet device using petroleum ether. These tests obtained mean yields of 35.2% for an extraction time of 5h. All the oil samples were sterilized and characterized in terms of their composition in fatty acids (FA) using gas chromatography. The main fatty acids detected were: palmitic (C16:0), stearic (C18:0), oleic (C18:1), linoleic (C18:2n-6) and α-linolenic (C18:3n-3). The FA contents obtained with Soxhlet dif ered from those obtained with SFE, with higher percentages of saturated and monounsaturated FA with the Soxhlet technique using petroleum ether. With respect to α-linolenic content (main component of linseed oil) in the samples, SFE performed better than Soxhlet extraction, obtaining percentages between 51.18% and 52.71%, whereas with Soxhlet extraction it was 47.84%. The antioxidant activity of the oil was assessed in the β-carotene/linoleic acid system. The percentages of inhibition of the oxidative process reached 22.11% for the SFE oil, but only 6.09% for commercial oil (cold pressing), suggesting that the SFE technique better preserves the phenolic compounds present in the seed, which are likely responsible for the antioxidant nature of the oil. In vitro tests with the sample displaying the best antioxidant response were conducted in rat liver homogenate to investigate the inhibition of spontaneous lipid peroxidation or autooxidation of biological tissue. Linseed oil proved to be more efficient than fish oil (used as standard) in decreasing lipid peroxidation in the liver tissue of Wistar rats, yielding similar results to those obtained with the use of BHT (synthetic antioxidant). Inhibitory capacity may be explained by the presence of phenolic compounds with antioxidant activity in the linseed oil. The results obtained indicate the need for more detailed studies, given the importance of linseed oil as one of the greatest sources of ω3 among vegetable oils
Resumo:
Universidade Federal do Rio Grande do Norte
Resumo:
Sistemas Integrados de Gestão ou Enterprise Resources Planning - ERP possibilitam o processamento das informações necessárias em uma empresa usando um único banco de dados. Muito tem se escrito sobre este tipo de software, abordando questões como o alto custo da aquisição de licenças, e a dependência de consultoria para a sua adaptação e implantação nas empresas. Atualmente vem crescendo o desenvolvimento e uso de ERP Livre de Código Aberto (FOS-ERP). Porém verifica-se que este tipo de sistema ainda não é suficientemente explorado, mesmo no meio acadêmico. Este artigo relata alguns trabalhos publicados sobre o assunto e levanta questões que devem ser tratadas por pesquisadores e demais interessados para adequar e viabilizar o uso desses sistemas conforme a realidade nacional. Assim, após uma introdução ao tema, são apresentadas algumas diferenças entre o FOS-ERP e seus equivalentes proprietários (Proprietary ERP ou P-ERP) em termos de modelos de negócios, seleção, customização e evolução. em seguida são elencados alguns desafios e oportunidades que o FOS-ERP pode oferecer a usuários, fornecedores, pesquisadores e colaboradores individuais. Concluindo, este artigo busca ampliar a discussão sobre FOS-ERP, destacando fatores tais como seu potencial de inovação tecnológica e estratégias de negócios.
Resumo:
Geographic Information System (GIS) are computational tools used to capture, store, consult, manipulate, analyze and print geo-referenced data. A GIS is a multi-disciplinary system that can be used by different communities of users, each one having their own interest and knowledge. This way, different knowledge views about the same reality need to be combined, in such way to attend each community. This work presents a mechanism that allows different community users access the same geographic database without knowing its particular internal structure. We use geographic ontologies to support a common and shared understanding of a specific domain: the coral reefs. Using these ontologies' descriptions that represent the knowledge of the different communities, mechanisms are created to handle with such different concepts. We use equivalent classes mapping, and a semantic layer that interacts with the ontologies and the geographic database, and that gives to the user the answers about his/her queries, independently of the used terms
Resumo:
Hydrogeological prospecting in Northeast Brazil and in other crystalline terrains has been developed on the basis of structural and regional geology concepts that date back to the 50-60 decades and, as such, demand a natural re-evaluation and update. In this kind of terrain, the percolation and accumulation of ground water are controlled by fractures and other types of discontinuities, such as foliations and geological contacts that, through weathering, impart porosity and permeability to the rocks, allowing water flow and storage. Several factors should be considered in the process of locating water wells, as discussed in the literature. Among these, the kind of structures, fracture geometry (including aperture and connectivity) and their geological and chronological context. It is important to correlate fracture systems with the regional neotectonic framework. Fractures at low angle (sub parallel) with the principal stress axis (s1) are those which tend to open (actually they work as tension joints) and, in principle, would present major hydric potential; in the opposite side, fractures at high angle to s1 would behave as closed by a compressional component. Fractures diagonal to the compression and tension axes correspond to shear fractures and, due to their connectivity with second fractures, are also important in terms of hydric potential. Uplift followed by terrain denudation leads to decompression and a general tendency to open (aided by weathering processes) fractures and other rock discontinuities, at different orientations. Low angle fractures, formed in this context, are equally important to increase connectivity, collection of water and recharge of the aquifer systems. In a general way, an opening component (neotectonic or by terrain decompression) and several models to increase fracture connectivity correlate with a greater hydric potential of these structures. Together with parallel research, this thesis addresses models of ground water occurrence in crystalline terrains, either improving well established concepts like the (Riacho-Fenda model), but also stressing other possibilities, like the role of alluvium and paleo-regoliths (the Calha Elúvio-Aluvionar model) and of strongly altered, permo-porous zones placed at variable depths below the present surface, flanking several types of discontinuities, especially interconnected fracture arrays (the Bolsões de Intemperismo model). Different methodological approaches are also discussed in order to improve success rates in the location of water wells in crystalline terrains. In this methodological review, a number of case studies were selected in the eastern domain of the State of Rio Grande do Norte, involving the localities of Santa Cruz, Santo Antônio, Serrinha, Nova Cruz, Montanhas, Lagoa de Pedras and Lagoa Salgada. Besides the neotectonic analysis of brittle structures, this Thesis addresses the validation of remote sensing as a tool for ground water prospecting. Several techniques were tested in order to detect and select areas with higher potential for ground water accumulation, using Landsat 5-TM and RADARSAT images, besides conventional aerial photos. A number of filters were tested to emphasize lineaments in the images, improving their discrimination, to identify areas with higher overburden humidity, which could reflect subsurface water accumulation, as well as alluvium and other sedimentary covers that might act as recharge zones. The work started with a regional analysis with the orbital images, followed by analysis of aerial photos, up to a detailed structural study of rock exposures in the terrain. This last step involved the analysis of outcrops surrounding wells (in a ray of approximately 10 to 100 m) with distinct productivities, including dry examples. At the level required for detail, it was not possible to accomplish a statistical approach using the available well data catalogs, which lack the desired specific information. The methodology worked out in this Thesis must undergo a testing phase through location of new water wells. An increase in the success rates as desired will led to a further consolidation step with wider divulgation of the methodology to private companies and governmental agencies involved in ground water prospecting in crystalline terrains
Resumo:
O objetivo principal deste trabalho foi propor uma reflexão sobre o processo a ser utilizado para a elaboração de um léxico bilíngüe na subárea de cardiologia. Para tanto, tomamos como base os conceitos dos estudos da tradução baseados em corpus, da lingüística de corpus e da terminologia. Como material para compor os corpora utilizamos artigos de cardiologia escritos em português e traduzidos para o inglês, assim como artigos originalmente escritos em português e em inglês. Com base no léxico proposto, pudemos notar algumas diferenças e algumas correspondências de uso entre os termos que aparecem no subcorpus de estudo de textos originais e traduzidos e nos corpora comparáveis em português e em inglês. Essa diferença apontaria que os termos não seriam unívocos dentro dessa linguagem de especialidade devido às diferenças de uso pelos especialistas de cardiologia para designar um mesmo referente.
Resumo:
Há termos botânicos que são heterofônicos. O significado e a perfeita prosadia doles obém-se em linguagem científica, através da etimologia. Como exemplo,encontram-se mesofilo e mesófilo. Este, sendo proparoxítono, refere-se aquilo que vive em lugares de luz difusa e umidade média; e aquale, referindo-se a anatomia da folha, é paroxítono. Com relação ao termo taxinomia, formado pelos prefixos gregos taxi e namo e mais o sufixo -ia, não deixa de ser a melhor combinação e deve-se, portanto, rejeitar as formas paralelas de taxeonomia, taxionomia e taxonomia.
Resumo:
Nossa pesquisa visa estudar a produção de subjetividade em instituições e estabelecimentos católicos dedicados à formação religiosa de seus membros. Neste artigo, tomamos como estudo o caso de um relato feito por um ex-membro do movimento Focolare. Procuramos descrever seu percurso formativo, sua integração e posterior abandono do grupo religioso. Operando basicamente por subtração e por meio de acréscimo de imaginário, a tecnologia empregada pelos movimentos religiosos integristas pode produzir uma subjetividade serializada de matiz fortemente fanático, sem espaço para a individualidade, para a iniciativa criadora, para a singularidade. Concluímos com algumas notas psicossociais relativas à compreensão psicanalítica do fanatismo religioso.
Resumo:
The objectives of this work were to evaluate three protein sources - soybean meal, fish meal and feather meal - and two methods of calculation of rations - the calculated in terms of crude protein (CP), according to recommendations of NRC (1988); and the proposed by the AFRC (1993), and calculated in terms of metabolizable protein (MP) - through the performance of calves. The animals were confined and submitted to five diets, that varied only protein sources in its composition, thus discriminated: SM- Soybean Meal, FsM- Fish Meal, FeM- Feather Meal, FsMU- Fish Meal and Urea, and FeMU Feather Meal and Urea. A complete diet was supplied, composed of 40% of sorghum silage and 60% of concentrate. All treatments possessed about of 2.56 Mcal/kg DM of metabolizable energy, being the treatments SM, FsM and FeM calculated by the system of CP, with 18% of CP, and the treatments FsMU and FeMU, calculated by the system of MP, with 16.3% of CP and a same amount of metabolizable protein than the treatment SM, with 112.0 grams of MP/day. Individually, the treatments did not present significant differences (P > 0.05) in the final alive weight, in daily gain weight and in dry matter intake, having differences only in the feed:gain ratio. The best feed:gain ratio happened in the treatment FsM and the worst in the treatment FeMU. It is concluded that the MP method provides similar results to the method of CP. The treatments with fish meal provide larger weight gains, smaller intake and better feed:gain ratio than the treatments with feather meal, staying the treatment soybean meal with intermediary daily gain.
Resumo:
Incluye Bibliografía
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)