Plasmonic nanoparticles for the protection of the final optics in inertial confinement fusion facilities: capabilities and limitations

Final lenses in laser fusion plants. Challenges for the protection of the final lenses. Plasmonic nanoparticles. Radiation resistance

Thermal and mechanical effects of different excitation modes based on low frequency laser modulation in optical hyperthermia

The low frequency modulation of the laser source (menor que30KHz) allows the generation of a pulsed signal that intermittently excites the gold nanorods. The temperature curves obtained for different frequencies and duty cycles of modulation but with equal average power and identical laser parameters, show that the thermal behavior in continuous wave and modulation modes is the same. However, the cell death experiments suggest that the percentage of death is higher in the cases of modulation. This observation allows us to conclude that there are other effects in addition to temperature that contribute to the cellular death. The mechanical effects like sound or pressure waves are expected to be generated from thermal expansion of gold nanorods. In order to study the behavior and magnitude of these processes we have developed a measure device based on ultrasound piezoelectric receivers (25KHz) and a lock-in amplifier that is able to detect the sound waves generated in samples of gold nanorods during laser irradiation providing us a voltage result proportional to the pressure signal. The first results show that the pressure measurements are directly proportional to the concentration of gold nanorods and the laser power, therefore, our present work is focused on determine the real influence of these effects in the cell death process.

Photovoltaic LiNbO3particles: Applications to Biomedicine/Biophotonics

Recently, a novel method to trap and pattern ensembles of nanoparticles has been proposed and tested. It relies on the photovoltaic (PV) properties of certain ferroelectric crystals such as LiNbO3 [1,2]. These crystals, when suitably doped, develop very high electric fields in response to illumination with light of suitable wavelength. The PV effect lies in the asymmetrical excitation of electrons giving rise to PV currents and associated space-charge fields (photorefractive effect). The field generated in the bulk of the sample propagates to the surrounding medium as evanescent fields. When dielectric or metal nanoparticles are deposited on the surface of the sample the evanescent fields give rise to either electrophoretic or dielectrophoretic forces, depending on the charge state of the particles, that induce the trapping and patterning effects [3,4]. The purpose of this work has been to explore the effects of such PV fields in the biology and biomedical areas. A first work was able to show the necrotic effects induced by such fields on He-La tumour cells grown on the surface of an illuminated iron-doped LiNbO3 crystal [5]. In principle, it is conceived that LiNbO3 nanoparticles may be advantageously used for such biomedical purposes considering the possibility of such nanoparticles being incorporated into the cells. Previous experiments using microparticles have been performed [5] with similar results to those achieved with the substrate. Therefore, the purpose of this work has been to fabricate and characterize the LiNbO3 nanoparticles and assess their necrotic effects when they are incorporated on a culture of tumour cells. Two different preparation methods have been used: 1) mechanical grinding from crystals, and 2) bottom-up sol-gel chemical synthesis from metal-ethoxide precursors. This later method leads to a more uniform size distribution of smaller particles (down to around 50 nm). Fig. 1(a) and 1(b) shows SEM images of the nanoparticles obtained with both method. An ad hoc software taking into account the physical properties of the crystal, particullarly donor and aceptor concentrations has been developped in order to estimate the electric field generated in noparticles. In a first stage simulations of the electric current of nanoparticles, in a conductive media, due to the PV effect have been carried out by MonteCarlo simulations using the Kutharev 1-centre transport model equations [6] . Special attention has been paid to the dependence on particle size and [Fe2+]/[Fe3+]. First results on cubic particles shows large dispersion for small sizes due to the random number of donors and its effective concentration (Fig 2). The necrotic (toxicity) effect of nanoparticles incorporated into a tumour cell culture subjected to 30 min. illumination with a blue LED is shown in Fig.3. For each type of nanoparticle the percent of cell survival in dark and illumination conditions has been plot as a function of the particle dilution factor. Fig. 1a corresponds to mechanical grinding particles whereas 1b and 1c refer to chemically synthesized particles with two oxidation states. The light effect is larger with mechanical grinding nanoparticles, but dark toxicity is also higher. For chemically synthesized nanoparticles dark toxicity is low but only in oxidized samples, where the PV effect is known to be larger, the light effect is appreciable. These preliminary results demonstrate that Fe:LiNbO· nanoparticles have a biological damaging effect on cells, although there are many points that should be clarified and much space for PV nanoparticles optimization. In particular, it appears necessary to determine the fraction of nanoparticles that become incorporated into the cells and the possible existence of threshold size effects. This work has been supported by MINECO under grant MAT2011-28379-C03.

Análisis de sistemas de protección y seguridad de muros de vidrio frente a cargas explosivas

El objetivo principal de este proyecto es el estudio y análisis de dos sistemas de seguridad y protección para muros de vidrio en terminales de transporte, frente a ondas de choque ocasionadas por la detonación de cargas explosivas. Se ha ensayado en primer lugar un adhesivo de seguridad y protección ("Ultra S400") colocado en la cara expuesta a la detonación y un sistema de bandejas metálicas ("kalzip"), tanto en el exterior como en el interior, en el segundo ensayo. Los ensayos se han instrumentado con captadores de presión, acelerómetros, sismógrafos y con cámaras convencionales y de alta velocidad, ésta última nos ha permitido calcular la velocidad de choque en el primero de los ensayos. El análisis de las presiones ha permitido caracterizar la explosión y compararla con los valores de referencia para el TNT del manual norteamericano UFC 3-340. El diseño de los ensayos se ha hecho conforme a las normas ISO y GSA de modo que los resultados han permitido clasificar las diferentes configuraciones de muro cortina ensayadas. ABSTRACT The main objective of this thesis is the analysis and evaluation of two safety and protective systems for glass walls at transportation terminals, against impact waves caused by the detonation of an explosive charge. It has been tested in first place, a safety and protective adhesive ("Ultra S400"), located at the exposed side of the explosion, and a system consisting of some metallic trays ("kalzip"), both inside and outside, for the second experiment. The tests have been monitored by pressure captures, accelerometer, seismographs, conventional cameras, and high-speed cameras, which allow us to determine the impact speed in the first experiment. The analysis of the pressure enables the characterization of the explosion and its comparison against typical TNT reference values from the UFC 3-340 North American manual. The design of the tests has been made according to ISO and GSA standards. Therefore, the results allow us to classify different patterns of curtain walls tested.

Evaluación del tamaño óptimo de mallado para la modelización mediante elementos finitos de losas de hormigón frente a cargas explosivas

Los elementos estructurales empleados en construcción no han sido en general diseñados para soportar acciones impulsivas, como la detonación de artefactos explosivos. Desde el siglo pasado el mundo ha sufrido ataques terroristas en los que en muchos casos se han producido explosiones que causaron víctimas, heridos y la destrucción de las construcciones próximas. Debido a este hecho, instituciones públicas y privadas comenzaron a mostrar interés por el comportamiento de los elementos estructurales que componen sus instalaciones. El hormigón armado es uno de los principales materiales utilizados en las estructuras de obras debido a sus buenas características, cuyo análisis y modelización en deformaciones dinámicas supone un campo de desafíos al que se está prestando gran atención en los últimos años. LS-DYNA® es un programa basado en elementos finitos capaz de simular problemas reales complejos en el que se han desarrollado distintos modelos de hormigón. Tres de esos modelos (K&C, RHT y CSCM) son evaluados con losas de distintos tamaños de mallado de elementos finitos frente a la detonación de 2 kg de TNT situados a 1 m de distancia. Dichos modelos son simulados y se obtienen los valores de las aceleraciones máximas en unos determinados puntos de las losas. Los valores son sometidos a la aplicación del Método GCI (Grid Convergence Index) para una relación de refinamiento de mallado no constante, cuyos resultados se comparan con aquellos registrados en los acelerómetros empleados durante la primera fase de ensayos del Proyecto SEGTRANS. Mediante el análisis de los resultados obtenidos se determina cual es el modelo de material y tamaño de mallado más adecuado que pueda emplearse en un futuro para poder modelar estructuras más complejas y con niveles de explosivo más elevados.

Functional analyses of troponin T mutations that cause hypertrophic cardiomyopathy: Insights into disease pathogenesis and troponin function

Mutations in a number of cardiac sarcomeric protein genes cause hypertrophic cardiomyopathy (HCM). Previous findings indicate that HCM-causing mutations associated with a truncated cardiac troponin T (TnT) and missense mutations in the β-myosin heavy chain share abnormalities in common, acting as dominant negative alleles that impair contractile performance. In contrast, Lin et al. [Lin, D., Bobkova, A., Homsher, E. & Tobacman, L. S. (1996) J. Clin. Invest. 97, 2842–2848] characterized a TnT point mutation (Ile79Asn) and concluded that it might lead to hypercontractility and, thus, potentially a different mechanism for HCM pathogenesis. In this study, three HCM-causing cardiac TnT mutations (Ile79Asn, Arg92Gln, and ΔGlu160) were studied in a myotube expression system. Functional studies of wild-type and mutant transfected myotubes revealed that all three mutants decreased the calcium sensitivity of force production and that the two missense mutations (Ile79Asn and Arg92Gln) increased the unloaded shortening velocity nearly 2-fold. The data demonstrate that TnT can alter the rate of myosin cross-bridge detachment, and thus the troponin complex plays a greater role in modulating muscle contractile performance than was recognized previously. Furthermore, these data suggest that these TnT mutations may cause disease via an increased energetic load on the heart. This would represent a second paradigm for HCM pathogenesis.

Slow skeletal troponin I gene transfer, expression, and myofilament incorporation enhances adult cardiac myocyte contractile function

The functional significance of the developmental transition from slow skeletal troponin I (ssTnI) to cardiac TnI (cTnI) isoform expression in cardiac myocytes remains unclear. We show here the effects of adenovirus-mediated ssTnI gene transfer on myofilament structure and function in adult cardiac myocytes in primary culture. Gene transfer resulted in the rapid, uniform, and nearly complete replacement of endogenous cTnI with the ssTnI isoform with no detected changes in sarcomeric ultrastructure, or in the isoforms and stoichiometry of other myofilament proteins compared with control myocytes over 7 days in primary culture. In functional studies on permeabilized single cardiac myocytes, the threshold for Ca2+-activated contraction was significantly lowered in adult cardiac myocytes expressing ssTnI relative to control values. The tension–Ca2+ relationship was unchanged from controls in primary cultures of cardiac myocytes treated with adenovirus containing the adult cardiac troponin T (TnT) or cTnI cDNAs. These results indicate that changes in Ca2+ activation of tension in ssTnI-expressing cardiac myocytes were isoform-specific, and not due to nonspecific functional changes resulting from overexpression of a myofilament protein. Further, Ca2+-activated tension development was enhanced in cardiac myocytes expressing ssTnI compared with control values under conditions mimicking the acidosis found during myocardial ischemia. These results show that ssTnI enhances contractile sensitivity to Ca2+ activation under physiological and acidic pH conditions in adult rat cardiac myocytes, and demonstrate the utility of adenovirus vectors for rapid and efficient genetic modification of the cardiac myofilament for structure/function studies in cardiac myocytes.

Alternative splicing, muscle calcium sensitivity, and the modulation of dragonfly flight performance

Calcium sensitivity of myosin cross-bridge activation in striated muscles commonly varies during ontogeny and in response to alterations in muscle usage, but the consequences for whole-organism physiology are not well known. Here we show that the relative abundances of alternatively spliced transcripts of the calcium regulatory protein troponin T (TnT) vary widely in flight muscle of Libellula pulchella dragonflies, and that the mixture of TnT splice variants explains significant portions of the variation in muscle calcium sensitivity, wing-beat frequency, and an index of aerodynamic power output during free flight. Two size-distinguishable morphs differ in their maturational pattern of TnT splicing, yet they show the same relationship between TnT transcript mixture and calcium sensitivity and between calcium sensitivity and aerodynamic power output. This consistency of effect in different developmental and physiological contexts strengthens the hypothesis that TnT isoform variation modulates muscle calcium sensitivity and whole-organism locomotor performance. Modulating muscle power output appears to provide the ecologically important ability to operate at different points along a tradeoff between performance and energetic cost.

Descrição morfológica e posicionamento filogenético de um lagarto (Reptilia, Squamata) do Mioceno Inferior da Formação Chichínales, General Roca, Província de Río Negro, Argentina

Embora os escamados sejam comumente encontrados em sítios fossilíferos cenozóicos sul−americanos, materiais esqueléticos completos são raros. Apenas alguns poucos exemplares assim foram registrados, com a maioria dos achados representando materiais fragmentários de crânio e mandíbulas ou vértebras isoladas. Dentre as localidades provedoras de vertebrados fósseis na América do Sul, a Formação Chichínales se destaca pela recente descoberta, em seus sedimentos, de um crânio quase completo de um lagarto teiídeo previamente desconhecido. Dada a fauna associada, a idade da formação é definida como Mioceno Temprano (Colhuehuapense). No presente estudo, conclui−se, através de uma análise filogenética contendo 39 espécies viventes e fósseis de escamados e 149 caracteres osteológicos, que este material pertence a uma nova espécie do gênero contemporâneo Callopistes. Uma descrição morfológica detalhada do fóssil, obtida através de análises estereoscópicas e de microtomografia computadorizada de alta resolução (CT Scan), também é apresentada. A matriz morfológica foi analisada com o auxílio do software TNT Versão 1.1, seguindo o princípio de máxima parcimônia, com todos os caracteres tratados com a mesma pesagem, resultando em quatro árvores igualmente parcimoniosas, que foram então utilizadas para a construção de uma árvore de consenso estrito. Em todas as quatro árvores, o novo táxon posicionou−se dentro da família Teiidae como um membro do clado formado pelas demais espécies viventes de Callopistes. Entretanto, não foi possível estabelecer uma relação de grupo−irmão inequívoca entre as duas espécies de Callopistes presentes na análise e o fóssil. A atual distribuição das duas espécies viventes de Callopistes e a localidade de onde foi recuperado o fóssil em estudo indicam que esse gênero possuía uma distribuição muito mais ampla no passado, chegando a áreas patagônicas cis−Andinas, diferentemente das áreas trans−Andinas de altitude onde as duas espécies atuais estão restritas

Ballistic spin-valves with Ni nanocontacts

Poster presented in TNT 2005 "Trends in Nanotechnology", Oviedo, Spain, 29 August-02 September, 2005.

Screen-printed electrode-based electrochemical detector coupled with in-situ ionic-liquid-assisted dispersive liquid–liquid microextraction for determination of 2,4,6-trinitrotoluene

A novel method is reported, whereby screen-printed electrodes (SPELs) are combined with dispersive liquid–liquid microextraction. In-situ ionic liquid (IL) formation was used as an extractant phase in the microextraction technique and proved to be a simple, fast and inexpensive analytical method. This approach uses miniaturized systems both in sample preparation and in the detection stage, helping to develop environmentally friendly analytical methods and portable devices to enable rapid and onsite measurement. The microextraction method is based on a simple metathesis reaction, in which a water-immiscible IL (1-hexyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide, [Hmim][NTf2]) is formed from a water-miscible IL (1-hexyl-3-methylimidazolium chloride, [Hmim][Cl]) and an ion-exchange reagent (lithium bis[(trifluoromethyl)sulfonyl]imide, LiNTf2) in sample solutions. The explosive 2,4,6-trinitrotoluene (TNT) was used as a model analyte to develop the method. The electrochemical behavior of TNT in [Hmim][NTf2] has been studied in SPELs. The extraction method was first optimized by use of a two-step multivariate optimization strategy, using Plackett–Burman and central composite designs. The method was then evaluated under optimum conditions and a good level of linearity was obtained, with a correlation coefficient of 0.9990. Limits of detection and quantification were 7 μg L−1 and 9 μg L−1, respectively. The repeatability of the proposed method was evaluated at two different spiking levels (20 and 50 μg L−1), and coefficients of variation of 7 % and 5 % (n = 5) were obtained. Tap water and industrial wastewater were selected as real-world water samples to assess the applicability of the method.

NT-proBNP in patients with out-of-hospital cardiac arrest: Results from the FINNRESUSCI Study

AIM To assess whether the established cardiovascular biomarker N-terminal pro-B-type natriuretic peptide (NT-proBNP) provides prognostic information in patients with out-of-hospital cardiac arrest due to ventricular tachycardia or fibrillation (OHCA-VT/VF). METHODS We measured NT-proBNP levels in 155 patients with OHCA-VT/VF enrolled into a prospective multicenter observational study in 21 ICUs in Finland. Blood samples were drawn <6h of OHCA-VT/VF and later after 24h, 48h, and 96h. The end-points were mortality and neurological outcome classified according to Cerebral Performance Category (CPC) after one year. NT-proBNP levels were compared to high-sensitivity troponin T (hs-TnT) levels and established risk scores. RESULTS NT-proBNP levels were higher in non-survivors compared to survivors on study inclusion (median 1003 [quartile (Q) 1-3 502-2457] vs. 527 [179-1284]ng/L, p=0.001) and after 24h (1913 [1012-4573] vs. 1080 [519-2210]ng/L, p<0.001). NT-proBNP levels increased from baseline to 96h after ICU admission (p<0.001). NT-proBNP levels were significantly correlated to hs-TnT levels after 24h (rho=0.27, p=0.001), but not to hs-TnT levels on study inclusion (rho=0.05, p=0.67). NT-proBNP levels at all time points were associated with clinical outcome, but only NT-proBNP levels after 24h predicted mortality and poor neurological outcome, defined as CPC 3-5, in models that adjusted for SAPS II and SOFA scores. hs-TnT levels did not add prognostic information to NT-proBNP measurements alone. CONCLUSION NT-proBNP levels at 24h improved risk assessment for poor outcome after one year on top of established risk indices, while hs-TnT measurements did not further add to risk prediction.

Intentional forgetting in depressed states

The aim of this thesis was to extend previous research on intentional forgetting in depressed states. The first experiment used the think/no-think paradigm, and found that although dysphoric individuals were significantly worse at suppressing emotional (positive and negative) words than non-dysphoric individuals, both groups were unsuccessful at direct thought suppression. However, there was no effect of rumination on dysphoric individuals' ability to intentionally forget material. Furthermore, there was also no group differences in attentional measures of Stroop and IDEO. The second experiment involved modifying the TNT task, by including the use of substitute words in the suppression phase, in order to determine whether recalling substitute words during suppression would increase the level of forgetting. The findings from the study revealed that both dysphoric and non-dysphoric individuals were successful at intentionally forgetting neutral words using a thought substitution strategy. However, both groups were impaired at suppressing words in the direct thought substitution condition. The third experiment investigated the influence of thought substitution on intentional forgetting of emotional words in dysphoria. The study replicated experiment two, but used emotional (i.e. positive and depression-relevant) words instead of neutral words. The study found that dysphoric individuals were still impaired in their ability to suppress emotional material. Furthermore, dysphoric individuals were recalling significantly more depression­ relevant respond and previously-suppressed words. The fourth experiment examined the role of executive control in intentional forgetting. In the study, dysphoric and non­ dysphoric participants were categorised as having good or poor executive control based on their scores on the operation span with words task (OSPAN). The study found that non-dysphoric individuals with good control demonstrated successful suppression. However, dysphoric individuals with good control were unsuccessful at suppression. The fifth experiment investigated whether experimentally induced changes in mood state would alter an individual's ability to intentionally forget emotional material. Non-dysphoric healthy participants were given a positive or negative autobiographical memory and music mood induction. They completed two modified think/no-think tasks, one prior to the mood induction and one after the mood induction. The study found that transient negative mood state impaired intentional forgetting of depression-relevant material. Summary: Taken together, the findings suggest that individuals in a depressed mood are impaired in their ability to intentionally forget emotional material, even with the use of a thought substitution strategy. Furthermore, the findings implicate poor executive control and negative mood state in impaired intentional forgetting. An important theme emerging from the findings was the role of an inhibitory mechanism in intentional forgetting. The findings reported in this thesis suggest that thought substitution involves engaging an inhibitory control mechanism that contributes to successful intentional forgetting. The findings have clear implications on depressed individuals everyday functioning, and suggest that even with the presence of effective distraction, dysphoric indivduals are imapired in their ability to suppress emotional material. Furthermore, it is suggested that impaired intentional forgetting of emotional material may contribute to the maintenance of depressed mood, and could potentially worsen ongoing depression.

Intentional forgetting in dysphoria:investigating the inhibitory effects of thought substitution using independent cues

Background Individuals with clinical and subclinical depression (dysphoria) exhibit problems intentionally forgetting unwanted memories on the think/no-think (TNT) paradigm (Anderson & Green, 2001). However, providing substitute words to think about instead of the to-be-forgotten targets can improve forgetting in depressed patients. Objectives To determine if thought substitution can enhance forgetting in dysphoric participants and to examine the potential mechanisms (blocking or inhibition) that might underpin successful forgetting. Methods Thirty-six dysphoric and 36 non-dysphoric participants learned neutral word-pairs and then practiced responding with the targets to some cues (think trials) and suppressing responses to others (no think trials). Half the participants were provided with substitute words to recall instead of the original targets (aided suppression) and half were simply told to avoid thinking about the targets (unaided suppression). Finally, participants completed two recall tests for the targets; one cued with the original probes and one with independent probes. Results Regardless of suppression condition (aided or unaided), dysphoric participants exhibited impaired forgetting, relative to their non-dysphoric counterparts, but only when cued with the original probes. Furthermore, higher depression scores were associated with poorer forgetting. In the aided condition, successful forgetting was observed on both the original and independent probe tasks, which supports the inhibitory account of thought substitution. Limitations Non-clinical status of the dysphoric participants was not confirmed using a validated measure. Conclusions Findings do not support the utility of thought substitution as a method of improving the forgetting in depressed participants, but do support the inhibition account of thought substitution.

Improving the scientific reliability of biological detection of explosives by Canis familiaris: Active odour signatures and their implications

The use of canines as a method of detection of explosives is well established worldwide and those applying this technology range from police forces and law enforcement to humanitarian agencies in the developing world. Despite the recent surge in publication of novel instrumental sensors for explosives detection, canines are still regarded by many to be the most effective real-time field method of explosives detection. However, unlike instrumental methods, currently it is difficult to determine detection levels, perform calibration of the canines' ability or produce scientifically valid quality control checks. Accordingly, amongst increasingly strict requirements regarding forensic evidence admission such as Frye and Daubert, there is a need for better scientific understanding of the process of canine detection. ^ When translated to the field of canine detection, just like any instrumental technique, peer reviewed publication of the reliability, success and error rates, is required for admissibility. Commonly training is focussed towards high explosives such as TNT and Composition 4, and the low explosives such as Black and Smokeless Powders are added often only for completeness. ^ Headspace analyses of explosive samples, performed by Solid Phase Microextraction (SPME) paired with Gas Chromatography - Mass Spectrometry (GC-MS), and Gas Chromatography - Electron Capture Detection (GC-ECD) was conducted, highlighting common odour chemicals. The odour chemicals detected were then presented to previously trained and certified explosives detection canines, and the activity/inactivity of the odour determined through field trials and experiments. ^ It was demonstrated that TNT and cast explosives share a common odour signature, and the same may be said for plasticized explosives such as Composition C-4 and Deta Sheet. Conversely, smokeless powders were demonstrated not to share common odours. An evaluation of the effectiveness of commercially available pseudo aids reported limited success. The implications of the explosive odour studies upon canine training then led to the development of novel inert training aids based upon the active odours determined. ^