Lowering blood alcohol content levels to save lives: A European case study

Road safety has become an increasing concern in developed countries due to the significant amount of fatalities and the associated economic losses. Only in 2005 these losses rose to 200,000 million euros, a considerable sum ¿ approximately 2% of GDP ¿ that easily justifies any public intervention. One measure taken by governments to address this issue is to enact stricter policies and regulations. Since drunk driving is one of the greatest concerns among public authorities in this field, several European countries have lowered their illegal Blood Alcohol Content (BAC) levels to 0.5 mg/ml during the last decade. This study is the first evaluation of the effectiveness of this transition using European panel-based data (CARE) for the period 1991-2003 with the differences-in-differences method in a fixed effects estimation that allows for any pattern of correlation (Cluster-Robust). The results reveal a positive impact on certain groups of road users and on the whole population when the policy is accompanied by enforcement interventions. Moreover, positive results appeared after a time lag of over two years. Finally, I state the importance of controlling for serial correlation in the evaluation of this type of policy.

Lowering blood alcohol content levels to save lives: A European case study

Road safety has become an increasing concern in developed countries due to the significant amount of fatalities and the associated economic losses. Only in 2005 these losses rose to 200,000 million euros, a considerable sum ¿ approximately 2% of GDP ¿ that easily justifies any public intervention. One measure taken by governments to address this issue is to enact stricter policies and regulations. Since drunk driving is one of the greatest concerns among public authorities in this field, several European countries have lowered their illegal Blood Alcohol Content (BAC) levels to 0.5 mg/ml during the last decade. This study is the first evaluation of the effectiveness of this transition using European panel-based data (CARE) for the period 1991-2003 with the differences-in-differences method in a fixed effects estimation that allows for any pattern of correlation (Cluster-Robust). The results reveal a positive impact on certain groups of road users and on the whole population when the policy is accompanied by enforcement interventions. Moreover, positive results appeared after a time lag of over two years. Finally, I state the importance of controlling for serial correlation in the evaluation of this type of policy.

Safety and sustainability research for university schools of fine arts

Designing new teaching programs for both undergraduate and graduate university studies involves integrating concepts and methodologies regarding quality, work safety and hazard prevention, and environmental protection. One of the challenges facing Spanish research within the realm of European Higher Education concerns health and safety issues in the Arts.In the case of Fine Arts, student exploration is one of the fundamental pillars of the study program; therefore it is imperative that art studios be optimized. This optimization affects both designated resources (infrastructures, materials, equipment, etc.) and organization of the teaching force.In this context, the aim of our research is to improve educational practices by designing quality measures that are both friendly to the environment and hazardous free. The aim here is to assure adequate art studio and laboratory management, and provide students with hazard free health and environmentally safe concepts that can be incorporated in their professional lives.The school of Fine Arts at the University of Barcelona is part of a pilot program, where our experience in educational innovation and research is serving as a reference for the implantation of OSHAS 18001 norms.

Safety and sustainability research for university schools of fine arts

Designing new teaching programs for both undergraduate and graduate university studies involves integrating concepts and methodologies regarding quality, work safety and hazard prevention, and environmental protection. One of the challenges facing Spanish research within the realm of European Higher Education concerns health and safety issues in the Arts.In the case of Fine Arts, student exploration is one of the fundamental pillars of the study program; therefore it is imperative that art studios be optimized. This optimization affects both designated resources (infrastructures, materials, equipment, etc.) and organization of the teaching force.In this context, the aim of our research is to improve educational practices by designing quality measures that are both friendly to the environment and hazardous free. The aim here is to assure adequate art studio and laboratory management, and provide students with hazard free health and environmentally safe concepts that can be incorporated in their professional lives.The school of Fine Arts at the University of Barcelona is part of a pilot program, where our experience in educational innovation and research is serving as a reference for the implantation of OSHAS 18001 norms.

Safety and sustainability research for university schools of fine arts

Designing new teaching programs for both undergraduate and graduate university studies involves integrating concepts and methodologies regarding quality, work safety and hazard prevention, and environmental protection. One of the challenges facing Spanish research within the realm of European Higher Education concerns health and safety issues in the Arts.In the case of Fine Arts, student exploration is one of the fundamental pillars of the study program; therefore it is imperative that art studios be optimized. This optimization affects both designated resources (infrastructures, materials, equipment, etc.) and organization of the teaching force.In this context, the aim of our research is to improve educational practices by designing quality measures that are both friendly to the environment and hazardous free. The aim here is to assure adequate art studio and laboratory management, and provide students with hazard free health and environmentally safe concepts that can be incorporated in their professional lives.The school of Fine Arts at the University of Barcelona is part of a pilot program, where our experience in educational innovation and research is serving as a reference for the implantation of OSHAS 18001 norms.

Clinical and biochemical responses after Gamma Knife surgery for a dopamine-secreting paraganglioma: case report.

The efficacy of Gamma Knife surgery (GKS) in local tumor control of non-secreting paragangliomas (PGLs) has been fully described by previous studies. However, with regard to secreting PGL, only one previous case report exists advocating its efficacy at a biological level. The aims of this study were: 1) to evaluate the safety/efficacy of GKS in a dopamine-secreting PGL; 2) to investigate whether the biological concentrations of free methoxytyramine could be used as a marker of treatment efficacy during the follow-up. We describe the case of a 62-year-old man diagnosed with left PGL. He initially underwent complete surgical excision. Thirty months after, he developed recurrent biological and neuroradiological disease; the most sensitive biomarker for monitoring the disease, concentration of plasma free methoxytyramine, started to increase. GKS was performed at a maximal marginal dose of 16 Gy. During the following 30 months, concentration of free methoxytyramine gradually decreased from 0.14 nmol/l (2*URL) before GKS to 0.09 nmol/l, 6 months after GKS and 0.07 nmol/l at the last follow-up after GKS (1.1*URL), confirming the efficacy of the treatment. Additionally, at 30 months there was approximately 36.6% shrinkage from the initial target volume. The GKS treatment was safe and effective, this being confirmed clinically, neuroradiologically and biologically. The case illustrates the importance of laboratory tests taking into account methoxytyramine when analyzing biological samples to assess the biochemical activity of a PGL. In addition, the identification of methoxytyramine as a unique positive biomarker could designate it for the monitoring of tumor relapse after treatments, including Gamma Knife surgery.

Social Preferences and Transport Policy: The case of US speed limits

This article, in reviewing the longrunning US debate on speed limits, illustrates how a different valuation of the trade-off between private mobility needs and safety concerns can shape transport policies. It is argued that the regulatory decentralization debate, together with the speed limit in force in each state, obey the social preferences and valuation given to this tradeoff. Such a view is consistent with evidence that higher speed limits are to be found in states with greater private mobility needs, even though their fatality rates might be among the highest in the country. By contrast, lower speed limits and supporters of a low national speed limit are to be found in states that show a greater concern for safety outcomes and which are less dependent on private mobility. By reviewing these events and examining the role played by the main actors and analyzing their motivations, the article identifies important lessons for similar future discussions on transport policy.

Thermal-Hydraulic Studies on the Safety Of VVER-440 Type Nuclear Power Plants

This thesis includes several thermal hydraulic analyses related to the Loviisa WER 440 nuclear power plant units. The work consists of experimental studies, analysis of the experiments, analysis of some plant transits and development of a calculational model for calculation of boric acid concentrations in the reactor. In the first part of the thesis, in the case of won of boric acid solution behaviour during long term cooling period of LOCAs, experiments were performed in scaled down test facilities. The experimental data together with the results of RELAPS/MOD3 simulations were used to develop a model for calculations of boric acid concentrations in the reactor during LOCAs. The results of calculations showed that margins to critical concentrations that would lead to boric acid crystallization were large, both in the reactor core and in the lower plenum. This was mainly caused by the fact that water in the primary cooling circuit includes borax (Na)BsO,.IOHZO), which enters the reactor when ECC water is taken from the sump and greatly increases boric acid solubility in water. In the second part, in the case of simulation of horizontal steam generators, experiments were performed with PACTEL integral test loop to simulate loss of feedwater transients. The PACTEL experiments, as well as earlier REWET III natural circulation tests, were analyzed with RELAPS/MOD3 Version Sm5 code. The analysis showed that the code was capable of simulating the main events during the experiments. However, in the case of loss of secondary side feedwater the code was not completely capable to simulate steam superheating in the secondary side of the steam generators. The third part of the work consists of simulations of Loviisa VVER reactor pump trip transients with RELAPSlMODI Eur, RELAPS/MOD3 and CATHARE codes. All three codes were capable to simulate the two selected pump trip transients and no significant differences were found between the results of different codes. Comparison of the calculated results with the data measured in the Loviisa plant also showed good agreement.

Foodstuffs and medicines as legal categories in the EU and China. Functional foods as a borderline case

The thesis discusses the regulation of foodstuffs and medicines, and particularly the regulation of functional foods. Legal systems investigated are the EU and China. Both are members of the WTO and Codex Alimentarius, which binds European and Chinese rules together. The study uses three Chinese berries as case examples of how product development faces regulation in practice. The berries have traditional uses as herbal medicines. Europe and China have similar nutrition problems to be resolved, such as obesity, cardiovascular disease, and diabetes. The three berries might be suitable raw materials for functional foods. Consumer products with health-enhancing functions, such as lowering blood pressure, might legally be classifi ed either as foodstuffs or medicines. The classifi cation will depend on functions and presentation of the product. In our opinion, food and medicine regulation should come closer together so the classifi cation issue would no longer be an issue. Safety of both foodstuffs and medicines is strictly regulated. With medicines, safety is a more relative concept, where benefi ts of the product are compared to side-effects in thorough scientifi c tests and trials. Foods, on the other hand, are not allowed to have side-effects. Hygiene rules and rules on the use of chemicals apply. In China, food safety is currently at focus as China has had several severe food scandals. Newly developed foods are called novel foods, and are specifi cally regulated. The current European novel food regulation from 1997 treats traditional third country products as novel. The Chinese regulation of 2007 also defi nes novel foods as something unfamiliar to a Chinese consumer. The concepts of novel food thus serve a protectionist purpose. As regards marketing, foods are allowed to bear health claims, whereas medicines bear medicinal claims. The separation is legally strict: foods are not to be presented as having medicinal functions. European nutrition and health claim regulation exists since 2006. China also has its regulation on health foods, listing the permitted claims and how to substantiate them. Health claims are allowed only on health foods. The European rules on medicines include separate categories for herbal medicines, traditional herbal medicines, and homeopathic medicines, where there are differing requirements for scientifi c substantiation. The scientifi c and political grounds for the separate categories provoke criticism. At surface, the Chinese legal system seems similar to the European one. To facilitate trade, China has enacted modern laws. Laws are needed as the country moves from planned economy to market economy: ‘rule of law’ needs to replace ‘rule of man’. Instead of being citizens, Chinese people long were subordinates to the Emperor. Confucius himself advised to avoid confl ict. Still, Chinese people do not and cannot always trust the legal system, as laws are enforced in an inconsistent manner, and courts are weak. In China, there have been problems with confl icting national and local laws. In Europe, the competence of the EU vs. the competence of the Member States is still not resolved, even though the European Commission often states that free trade requires harmonisation. Food and medicine regulation is created by international organisations, food and medicine control agencies, standards agencies, companies and their organisations. Regulation can be divided in ‘hard law’ and ‘soft law’. One might claim that hard law is in crisis, as soft law is gaining importance. If law is out of fashion, regulation certainly isn’t. In the future, ‘law’ might mean a process where rules and incentives are created by states, NGOs, companies, consumers, and other stakeholders. ‘Law’ might thus refer to a constant negotiation between public and private actors. Legal principles such as transparency, equal treatment, and the right to be heard would still be important.

Internet pankkipalveluiden markkinointi ja laatuarviointi pk-yritysten näkökulmasta - Case: Handelsbanken

Internet pankkipalveluiden laatuun kiinnitetään yhä enemmän huomiota. Pankkipalveluiden siirtyessä Internetiin pankit pitävät Internet pankkipalveluiden laatua yhä tärkeämpänä kilpailuelementtinä. Vuosittain tehtävät tutkimukset ja niiden tutkimustulokset Internet pankkipalveluiden laadusta kuvaavat palveluiden kehitystä ja tämänhetkistä tilannetta. Pk-yritysten saaman palvelun laadun arviointi onkin erittäin tärkeää tuottoisan asiakassegmenttinsä ansiosta. Tämän tutkielman tarkoituksena on selvittää Handelsbankenin Internet pankkipalveluiden laatu ja sen ulottuvuudet pk-yrityksille, palvelun markkinoinnin viitekehyksessä. Tutkielman teoreettinen osa perustuu Internet pankkipalveluiden laatua ja toimivuutta käsittelevään tieteelliseen kirjallisuuteen ja artikkeleihin. Empiirisessä osassa tutkitaan sitä, mistä ulottuvuuksista palvelun laatu markkinoinnin kontekstissa muodostuu ja mikä on laadun ulottuvuuksien suhde asiakastyytyväisyyteen ja kehitysmahdollisuuksiin. Empiiriseen tutkimukseen kuuluu kaksi eri osa-aluetta, haastattelututkimus sekä elektronisella kyselylomakkeella toteutettu kyselytutkimus, jossa muun muassa selvitettiin pk-yritysten käsityksiä eri laadun ulottuvuuksista sekä heidän kokemuksiaan palvelun laadusta. Tutkimusote on kvantitatiivinen ja osin myös kvalitatiivinen. Perinteisten pankkipalveluiden laadun ulottuvuuksien lisäksi tutkimuksen tuloksista havaittiin, että Internet pankkipalveluiden laadun uusia ulottuvuuksia ovat palvelualttius, yksilöllinen ja kehittyvä palvelu, palvelun luotettavuus, käytettävyys, saavutettavuus, ”rahoille vastinetta” ja turvallisuus. Tutkimustulokset osoittavat, että Internet pankkipalveluiden laadulla ja etenkin havaituilla uusilla ulottuvuuksilla on yhteys pk-yritysten asiakastyytyväisyyteen.

APROS model validation in case of fast transients in a boiling water reactor

This Master´s thesis investigates the performance of the Olkiluoto 1 and 2 APROS model in case of fast transients. The thesis includes a general description of the Olkiluoto 1 and 2 nuclear power plants and of the most important safety systems. The theoretical background of the APROS code as well as the scope and the content of the Olkiluoto 1 and 2 APROS model are also described. The event sequences of the anticipated operation transients considered in the thesis are presented in detail as they will form the basis for the analysis of the APROS calculation results. The calculated fast operational transient situations comprise loss-of-load cases and two cases related to a inadvertent closure of one main steam isolation valve. As part of the thesis work, the inaccurate initial data values found in the original 1-D reactor core model were corrected. The input data needed for the creation of a more accurate 3-D core model were defined. The analysis of the APROS calculation results showed that while the main results were in good accordance with the measured plant data, also differences were detected. These differences were found to be caused by deficiencies and uncertainties related to the calculation model. According to the results the reactor core and the feedwater systems cause most of the differences between the calculated and measured values. Based on these findings, it will be possible to develop the APROS model further to make it a reliable and accurate tool for the analysis of the operational transients and possible plant modifications.

Satamatoimijoiden riskienhallinta alusrajapinnassa, case HaminaKotkan kaasu- ja nestesatama

This study examined the risk management of port operators in the surface of vessel and terminal. This study was specially focused on the safety aspects as well as operational risks in surface of port of HaminaKotka liquid bulk terminal. Operational risks are examined during loading and unloading only. The theory of this study is based on strategy and competence of organizations and introducing different kind of methods of risk analysis. In addition, safety and directives of liquid bulk terminal is examined. Process scenario is represented concerning risks and risk management occurring in the surface of vessel and terminal. Finally the affect of human errors for the occurred accidents are examined. The method of explore was survey method. Survey was implemented via e-mail and enquiry was formatted as multiple choice enquiries. The main outcome of this study was that security level among enterprises operating in the liquid bulk terminal is high. Each enterprise has chosen the best risk analysis methods, which are suitable for their purposes. There is not one risk analysis available only used by every enterprise in the liquid bulk terminal. Using coherent risk analysis would clear out the everyday activities on that area. Greater presence of port master would also be desirable during every day activities in liquid bulk terminal.

Establishment of a health and safety management system according to the OHSAS 18001 standard

The thesis develops guidelines for the implementation of the health and safety management system according to the OHSAS 18001 standard, as well as the feasible threat analysis, project proposal schedule, future system quality improvements and organizational change evaluation. The theoretical part clarifies determination of occupational health and safety, its management system, the OHSAS 18001 standard and integrated management system compounded of triple ISO 14001, ISO 9001 and OHSAS 18001 standards. The literature includes such important aspects as human factor, organizational policies, possible benefits, threats, organizational safety culture, Deming’s quality improvement cycle, system implementation, maintenance and cost matters. The empirical part demonstrates real-life situation by using Andritz Pulp & Paper Oy as a case study. Prior the thesis proposal, Andritz Group is analysed including separate business areas, acquisition and integration strategies, current status of the health and safety management and parallel experiences of the largest business area Andritz Hydro. The proposal is aimed at improving the current health and safety system for the permanent and sub-contracted employees at Andritz Pulp & Paper both in Finland and in various projects globally.

Dam safety guide

A new Dam Safety Act (494/2009) came into force on 1st October 2009 and a Government Decree on Dam Safety (319/2010) on 5th May 2010. This Dam Safety Guide replaces the Dam Safety Code of Practice (Publication of the Ministry of Agriculture and Forestry 7/1997), removed from circulation on 1st October 2009. The Dam Safety Guide is not binding on the dam owner; the purpose is to complement and elucidate the relevant law and and decree through examples and descriptions. The Guide takes up questions concerning dam design, for instance hydrological dimensioning and technical safety requirements, dam construction and use, the dam break hazard analysis and the dam owner’s emergency action plan, maintenance, use, monitoring as well as the annual and periodic inspections. Dams are classified according to the hazard they pose into class 1, 2 or 3 dams. The classification is not needed, if, according to the dam safety authority, the dam poses no danger. The owner of a classified dam must prepare a monitoring programme, to be approved by decision of the dam safety authority. To establish the hazard caused by a dam, the owner of a class 1 dam must prepare an analysis of the dam hazard to humans and property as well as to the environment. The dam safety authority may also require a dam break hazard analysis for a dam other than class 1 dam if deemed necessary for classification. The owner of a class 1 dam must prepare a plan of measures in case of emergency or operational failure. The plan shall present the dam owner’s state of preparedness to act on their own initiative in the situations described above. In each case, the rescue authorities make a separate assessment for the need to prepare a plan as set out in the Rescue Act. The dam owner must provide the information specified in the Dam Safety Decree to be entered into the dam safety information system. The dam safety authority and the owner of the dam must keep up-to-date printouts in their own dam safety files from the information system for each dam as well as other important documents connected with dam safety to ensure that these are readily available in case of disturbance.

Rigorous development of safety-critical systems

Nowadays, computer-based systems tend to become more complex and control increasingly critical functions affecting different areas of human activities. Failures of such systems might result in loss of human lives as well as significant damage to the environment. Therefore, their safety needs to be ensured. However, the development of safety-critical systems is not a trivial exercise. Hence, to preclude design faults and guarantee the desired behaviour, different industrial standards prescribe the use of rigorous techniques for development and verification of such systems. The more critical the system is, the more rigorous approach should be undertaken. To ensure safety of a critical computer-based system, satisfaction of the safety requirements imposed on this system should be demonstrated. This task involves a number of activities. In particular, a set of the safety requirements is usually derived by conducting various safety analysis techniques. Strong assurance that the system satisfies the safety requirements can be provided by formal methods, i.e., mathematically-based techniques. At the same time, the evidence that the system under consideration meets the imposed safety requirements might be demonstrated by constructing safety cases. However, the overall safety assurance process of critical computerbased systems remains insufficiently defined due to the following reasons. Firstly, there are semantic differences between safety requirements and formal models. Informally represented safety requirements should be translated into the underlying formal language to enable further veri cation. Secondly, the development of formal models of complex systems can be labour-intensive and time consuming. Thirdly, there are only a few well-defined methods for integration of formal verification results into safety cases. This thesis proposes an integrated approach to the rigorous development and verification of safety-critical systems that (1) facilitates elicitation of safety requirements and their incorporation into formal models, (2) simplifies formal modelling and verification by proposing specification and refinement patterns, and (3) assists in the construction of safety cases from the artefacts generated by formal reasoning. Our chosen formal framework is Event-B. It allows us to tackle the complexity of safety-critical systems as well as to structure safety requirements by applying abstraction and stepwise refinement. The Rodin platform, a tool supporting Event-B, assists in automatic model transformations and proof-based verification of the desired system properties. The proposed approach has been validated by several case studies from different application domains.