Three-dimensional reconstruction of fracture surfaces: Area matching algorithms for automatic parallax measurements

This paper describes two solutions for systematic measurement of surface elevation that can be used for both profile and surface reconstructions for quantitative fractography case studies. The first one is developed under Khoros graphical interface environment. It consists of an adaption of the almost classical area matching algorithm, that is based on cross-correlation operations, to the well-known method of parallax measurements from stereo pairs. A normalization function was created to avoid false cross-correlation peaks, driving to the true window best matching solution at each region analyzed on both stereo projections. Some limitations to the use of scanning electron microscopy and the types of surface patterns are also discussed. The second algorithm is based on a spatial correlation function. This solution is implemented under the NIH Image macro programming, combining a good representation for low contrast regions and many improvements on overall user interface and performance. Its advantages and limitations are also presented.

Use of one-bottle adhesive as an intermediate bonding layer to reduce sealant microleakage on saliva-contaminated enamel

Purpose: To evaluate the influence of three different adhesives, each used as an intermediary layer, on microleakage of sealants applied under condition of salivary contamination. Materials and Methods: Six different experimental conditions were compared, 3 with adhesives and 3 without. After prophylaxis and acid etching of enamel, salivary contamination was placed for 10 s. In Group SC the sealant was applied after saliva without bonding agent and then light-cured. In Group SCA, after saliva, the surface was air dried, and then the sealant was applied and cured. In Groups ScB, SB and PB, a bonding agent (Scotchbond Dual Cure/3M, Single Bond/3M and Prime & Bond 2.1/Dentsply, respectively) was applied after the saliva and prior to the sealant application and curing. After storage in distilled water at 37°C for 24 hrs, the teeth were submitted to 500 thermal cycles (5°C and 55°C), and silver nitrate was used as a leakage tracer. Leakage data were collected on cross sections as percentage of total enamel-sealant interface length. Representative samples were evaluated under SEM. Results: Sealants placed on contaminated enamel with no bonding agent showed extensive microleakage (94.27% in SC; 42.65% in SCA). The SEM revealed gaps as wide as 20 μm in areas where silver nitrate leakage could be visualized. In contrast, all bonding agent groups showed leakage less than 6.9%. Placement of sealant with a dentin-bonding agent on contaminated enamel significantly reduced microleakage (P< 0.0001). The use of a bonding agent as an intermediary layer between enamel and sealant significantly reduced saliva's effect on sealant microleakage.

Analysis of combining ability in soybean cultivars

Eight soybean cultivars (Doko, Bossier, Ocepar-4, BR-15, FT-Cometa, Savana, Paraná and Cristalina) were crossed in a diallel design. Plants of the F1 generation and their parents were evaluated under short-day conditions for the determination of the general (GCA) and specific (SCA) combining ability. The estimated GCA and SCA values were significant for the evaluated traits except for the total cycle. Highest GCA effects for the traits days to flowering, plant height, insertion height, number of branches and total cycle were estimated for the cultivars Doko, Cristalina and Savana. The variability observed in the trait days to flowering can, for the most part, be explained by additive effects.

The millennium development goals: strategic implications for the Latin American and Caribbean statistical systems

Includes bibliography

Persistence of epoxy-based sealer residues in dentin treated with different chemical removal protocols

The presence of residual endodontic sealer in the pulp chamber may cause discoloration of the dental crown and interfere with the adhesion of restorative materials. The aim of this study was to compare the efficacy of different solvents in removing residues of an epoxy resin-based sealer (AH Plus) from the dentin walls of the pulp chamber, by scanning electron microscopy (SEM). Forty-four bovine incisor dental crown fragments were treated with 17% EDTA and 2.5% NaOCl. Specimens received a coating of AH Plus and were left undisturbed for 5 min. Then, specimens were divided in four groups (n = 10) and cleaned with one of the following solutions: isopropyl alcohol, 95% ethanol, acetone solution, or amyl acetate solution. Negative controls (n = 2) did not receive AH Plus, while in positive controls (n = 2) the sealer was not removed. AH Plus removal was evaluated by SEM, and a score system was applied. Data were analyzed by Kruskal-Wallis and Dunn tests. None of the solutions tested was able to completely remove AH Plus from the dentin of the pulp chamber. Amyl acetate performed better than 95% ethanol and isopropyl alcohol (p < 0.05), but not better than acetone (p > 0.05) in removing the sealer from dentin. No significant differences were observed between acetone, 95% ethanol, and isopropyl alcohol (p > 0.05). It was concluded that amyl acetate and acetone may be good options for cleaning the pulp chamber after obturation with AH Plus. SCANNING 35:17-21, 2013. © 2012 Wiley Periodicals, Inc. © Wiley Periodicals, Inc.

A brief discussion about image quality and SEM methods for quantitative fractography of polymer composites

The methodology for fracture analysis of polymeric composites with scanning electron microscopes (SEM) is still under discussion. Many authors prefer to use sputter coating with a conductive material instead of applying low-voltage (LV) or variable-pressure (VP) methods, which preserves the original surfaces. The present work examines the effects of sputter coating with 25 nm of gold on the topography of carbon-epoxy composites fracture surfaces, using an atomic force microscope. Also, the influence of SEM imaging parameters on fractal measurements is evaluated for the VP-SEM and LV-SEM methods. It was observed that topographic measurements were not significantly affected by the gold coating at tested scale. Moreover, changes on SEM setup leads to nonlinear outcome on texture parameters, such as fractal dimension and entropy values. For VP-SEM or LV-SEM, fractal dimension and entropy values did not present any evident relation with image quality parameters, but the resolution must be optimized with imaging setup, accompanied by charge neutralization. © Wiley Periodicals, Inc.

Draft biennial programme of regional and international cooperation activities of the Statistical Conference of the Americas of ECLAC, 2007-2009

Includes bibliography

Plan estratégico 2005-2015 (Cuarta Conferencia Estadística de las Américas)

Incluye Bibliografía

Activities report of the initiative group of the working group on environmental statistics

Includes bibliography

Strategic plan 2005-2015

Documento de trabajo (Español e Inglés); / Working document (Spanish and English); Third meeting of the SCA-ECLAC. Santiago, Chile, 1-3 June 2005 The purpose of this document is to provide the necessary background information and a proposal for a long-term strategic plan to guide the activities of the Statistical Conference of the Americas of the Economic Commission for Latin America and the Caribbean (ECLAC); in order to support the development of official statistics in Latin America and the Caribbean.

Draft programme of regional statistical work for Latin America and the Caribbean, July 2005-June 2007

Includes bibliography

Draft programme of statistical work of the ECLAC system, 2006-2007

Includes bibliography

Development of national statistical systems and the responsibilities of national statistical offices

Includes bibliography

Pressão intra-abdominal como preditor de lesão renal aguda no pós-operatório de cirurgias abdominais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Polimorfismos nos genes TGFB e TNFA e sua relação com crises vaso-oclusivas e disfunção endotelial em pacientes com anemia falciforme

Pós-graduação em Genética - IBILCE