Characterization of the temperature, load and damage effects using piezoelectric transducer patches based on fuzzy clustering

Structural Health Monitoring (SHM) denotes a system with the ability to detect and interpret adverse changes in a structure. One of the critical challenges for practical implementation of SHM system is the ability to detect damage under changing environmental conditions. This paper aims to characterize the temperature, load and damage effects in the sensor measurements obtained with piezoelectric transducer (PZT) patches. Data sets are collected on thin aluminum specimens under different environmental conditions and artificially induced damage states. The fuzzy clustering algorithm is used to organize the sensor measurements into a set of clusters, which can attribute the variation in sensor data due to temperature, load or any induced damage.

Versatile and easy-to-assemble measurement system for impedance-based structural health monitoring

In this paper we present a versatile and easy-to-assemble measurement system for structural health monitoring (SHM) based on the electromechanical impedance (EMI) technique. The hardware of the proposed system consists only of a common data acquisition (DAQ) device with external resistors and allows real-time data acquisition from multiple sensors. Besides the low-cost compared to conventional impedance analyzers, the hardware and the software are simple and easier to implement than other measurement systems that have been recently proposed.

Bioremediation of PAHs - Limitations and soultions

Introduction 1.1 Occurrence of polycyclic aromatic hydrocarbons (PAH) in the environment Worldwide industrial and agricultural developments have released a large number of natural and synthetic hazardous compounds into the environment due to careless waste disposal, illegal waste dumping and accidental spills. As a result, there are numerous sites in the world that require cleanup of soils and groundwater. Polycyclic aromatic hydrocarbons (PAHs) are one of the major groups of these contaminants (Da Silva et al., 2003). PAHs constitute a diverse class of organic compounds consisting of two or more aromatic rings with various structural configurations (Prabhu and Phale, 2003). Being a derivative of benzene, PAHs are thermodynamically stable. In addition, these chemicals tend to adhere to particle surfaces, such as soils, because of their low water solubility and strong hydrophobicity, and this results in greater persistence under natural conditions. This persistence coupled with their potential carcinogenicity makes PAHs problematic environmental contaminants (Cerniglia, 1992; Sutherland, 1992). PAHs are widely found in high concentrations at many industrial sites, particularly those associated with petroleum, gas production and wood preserving industries (Wilson and Jones, 1993). 1.2 Remediation technologies Conventional techniques used for the remediation of soil polluted with organic contaminants include excavation of the contaminated soil and disposal to a landfill or capping - containment - of the contaminated areas of a site. These methods have some drawbacks. The first method simply moves the contamination elsewhere and may create significant risks in the excavation, handling and transport of hazardous material. Additionally, it is very difficult and increasingly expensive to find new landfill sites for the final disposal of the material. The cap and containment method is only an interim solution since the contamination remains on site, requiring monitoring and maintenance of the isolation barriers long into the future, with all the associated costs and potential liability. A better approach than these traditional methods is to completely destroy the pollutants, if possible, or transform them into harmless substances. Some technologies that have been used are high-temperature incineration and various types of chemical decomposition (for example, base-catalyzed dechlorination, UV oxidation). However, these methods have significant disadvantages, principally their technological complexity, high cost , and the lack of public acceptance. Bioremediation, on the contrast, is a promising option for the complete removal and destruction of contaminants. 1.3 Bioremediation of PAH contaminated soil & groundwater Bioremediation is the use of living organisms, primarily microorganisms, to degrade or detoxify hazardous wastes into harmless substances such as carbon dioxide, water and cell biomass Most PAHs are biodegradable unter natural conditions (Da Silva et al., 2003; Meysami and Baheri, 2003) and bioremediation for cleanup of PAH wastes has been extensively studied at both laboratory and commercial levels- It has been implemented at a number of contaminated sites, including the cleanup of the Exxon Valdez oil spill in Prince William Sound, Alaska in 1989, the Mega Borg spill off the Texas coast in 1990 and the Burgan Oil Field, Kuwait in 1994 (Purwaningsih, 2002). Different strategies for PAH bioremediation, such as in situ , ex situ or on site bioremediation were developed in recent years. In situ bioremediation is a technique that is applied to soil and groundwater at the site without removing the contaminated soil or groundwater, based on the provision of optimum conditions for microbiological contaminant breakdown.. Ex situ bioremediation of PAHs, on the other hand, is a technique applied to soil and groundwater which has been removed from the site via excavation (soil) or pumping (water). Hazardous contaminants are converted in controlled bioreactors into harmless compounds in an efficient manner. 1.4 Bioavailability of PAH in the subsurface Frequently, PAH contamination in the environment is occurs as contaminants that are sorbed onto soilparticles rather than in phase (NAPL, non aqueous phase liquids). It is known that the biodegradation rate of most PAHs sorbed onto soil is far lower than rates measured in solution cultures of microorganisms with pure solid pollutants (Alexander and Scow, 1989; Hamaker, 1972). It is generally believed that only that fraction of PAHs dissolved in the solution can be metabolized by microorganisms in soil. The amount of contaminant that can be readily taken up and degraded by microorganisms is defined as bioavailability (Bosma et al., 1997; Maier, 2000). Two phenomena have been suggested to cause the low bioavailability of PAHs in soil (Danielsson, 2000). The first one is strong adsorption of the contaminants to the soil constituents which then leads to very slow release rates of contaminants to the aqueous phase. Sorption is often well correlated with soil organic matter content (Means, 1980) and significantly reduces biodegradation (Manilal and Alexander, 1991). The second phenomenon is slow mass transfer of pollutants, such as pore diffusion in the soil aggregates or diffusion in the organic matter in the soil. The complex set of these physical, chemical and biological processes is schematically illustrated in Figure 1. As shown in Figure 1, biodegradation processes are taking place in the soil solution while diffusion processes occur in the narrow pores in and between soil aggregates (Danielsson, 2000). Seemingly contradictory studies can be found in the literature that indicate the rate and final extent of metabolism may be either lower or higher for sorbed PAHs by soil than those for pure PAHs (Van Loosdrecht et al., 1990). These contrasting results demonstrate that the bioavailability of organic contaminants sorbed onto soil is far from being well understood. Besides bioavailability, there are several other factors influencing the rate and extent of biodegradation of PAHs in soil including microbial population characteristics, physical and chemical properties of PAHs and environmental factors (temperature, moisture, pH, degree of contamination). Figure 1: Schematic diagram showing possible rate-limiting processes during bioremediation of hydrophobic organic contaminants in a contaminated soil-water system (not to scale) (Danielsson, 2000). 1.5 Increasing the bioavailability of PAH in soil Attempts to improve the biodegradation of PAHs in soil by increasing their bioavailability include the use of surfactants , solvents or solubility enhancers.. However, introduction of synthetic surfactant may result in the addition of one more pollutant. (Wang and Brusseau, 1993).A study conducted by Mulder et al. showed that the introduction of hydropropyl-ß-cyclodextrin (HPCD), a well-known PAH solubility enhancer, significantly increased the solubilization of PAHs although it did not improve the biodegradation rate of PAHs (Mulder et al., 1998), indicating that further research is required in order to develop a feasible and efficient remediation method. Enhancing the extent of PAHs mass transfer from the soil phase to the liquid might prove an efficient and environmentally low-risk alternative way of addressing the problem of slow PAH biodegradation in soil.

Mapping the increasing risk of human alveolar echinococcosis in Limburg, The Netherlands

The parasite Echinococcus multilocularis was first detected in The Netherlands in 1996 and repeated studies have shown that the parasite subsequently spread in the local population of foxes in the province of Limburg. It was not possible to quantify the human risk of alveolar echinococcosis because no relationship between the amount of parasite eggs in the environment and the probability of infection in humans was known. Here, we used the spread of the parasite in The Netherlands as a predictor, together with recently published historical records of the epidemiology of alveolar echinococcosis in Switzerland, to achieve a relative quantification of the risk. Based on these analyses, the human risk in Limburg was simulated and up to three human cases are predicted by 2018. We conclude that the epidemiology of alveolar echinococcosis in The Netherlands might have changed from a period of negligible risk in the past to a period of increasing risk in the forthcoming years.

A qualitative risk assessment approach for Swiss dairy products: opportunities and limitations

Switzerland implemented a risk-based monitoring of Swiss dairy products in 2002 based on a risk assessment (RA) that considered the probability of exceeding a microbiological limit value set by law. A new RA was launched in 2007 to review and further develop the previous assessment, and to make recommendations for future risk-based monitoring according to current risks. The resulting qualitative RA was designed to ascertain the risk to human health from the consumption of Swiss dairy products. The products and microbial hazards to be considered in the RA were determined based on a risk profile. The hazards included Campylobacter spp., Listeria monocytogenes, Salmonella spp., Shiga toxin-producing Escherichia coli, coagulase-positive staphylococci and Staphylococcus aureus enterotoxin. The release assessment considered the prevalence of the hazards in bulk milk samples, the influence of the process parameters on the microorganisms, and the influence of the type of dairy. The exposure assessment was linked to the production volume. An overall probability was estimated combining the probabilities of release and exposure for each combination of hazard, dairy product and type of dairy. This overall probability represents the likelihood of a product from a certain type of dairy exceeding the microbiological limit value and being passed on to the consumer. The consequences could not be fully assessed due to lack of detailed information on the number of disease cases caused by the consumption of dairy products. The results were expressed as a ranking of overall probabilities. Finally, recommendations for the design of the risk-based monitoring programme and for filling the identified data gaps were given. The aims of this work were (i) to present the qualitative RA approach for Swiss dairy products, which could be adapted to other settings and (ii) to discuss the opportunities and limitations of the qualitative method.

Performance of Interleukin-6 and Interleukin-8 serum levels in pediatric oncology patients with neutropenia and fever for the assessment of low-risk

BACKGROUND: Patients with chemotherapy-related neutropenia and fever are usually hospitalized and treated on empirical intravenous broad-spectrum antibiotic regimens. Early diagnosis of sepsis in children with febrile neutropenia remains difficult due to non-specific clinical and laboratory signs of infection. We aimed to analyze whether IL-6 and IL-8 could define a group of patients at low risk of septicemia. METHODS: A prospective study was performed to assess the potential value of IL-6, IL-8 and C-reactive protein serum levels to predict severe bacterial infection or bacteremia in febrile neutropenic children with cancer during chemotherapy. Statistical test used: Friedman test, Wilcoxon-Test, Kruskal-Wallis H test, Mann-Whitney U-Test and Receiver Operating Characteristics. RESULTS: The analysis of cytokine levels measured at the onset of fever indicated that IL-6 and IL-8 are useful to define a possible group of patients with low risk of sepsis. In predicting bacteremia or severe bacterial infection, IL-6 was the best predictor with the optimum IL-6 cut-off level of 42 pg/ml showing a high sensitivity (90%) and specificity (85%). CONCLUSION: These findings may have clinical implications for risk-based antimicrobial treatment strategies.

Spatiotemporal dynamics: the need for an innovative approach in mountain hazard risk management

Starting with an overview on losses due to mountain hazards in the Russian Federation and the European Alps, the question is raised why a substantial number of events still are recorded—despite considerable efforts in hazard mitigation and risk reduction. The main reason for this paradox lies in a missing dynamic risk-based approach, and it is shown that these dynamics have different roots: firstly, neglecting climate change and systems dynamics, the development of hazard scenarios is based on the static approach of design events. Secondly, due to economic development and population dynamics, the elements at risk exposed are subject to spatial and temporal changes. These issues are discussed with respect to temporal and spatial demands. As a result, it is shown how risk is dynamic on a long-term and short-term scale, which has to be acknowledged in the risk concept if this concept is targeted at a sustainable development of mountain regions. A conceptual model is presented that can be used for dynamical risk assessment, and it is shown by different management strategies how this model may be converted into practice. Furthermore, the interconnectedness and interaction between hazard and risk are addressed in order to enhance prevention, the level of protection and the degree of preparedness.

A pilot test of the new Swiss regulatory procedure for categorizing clinical trials by risk: A randomized controlled trial

BACKGROUND/AIMS Several countries are working to adapt clinical trial regulations to align the approval process to the level of risk for trial participants. The optimal framework to categorize clinical trials according to risk remains unclear, however. Switzerland is the first European country to adopt a risk-based categorization procedure in January 2014. We assessed how accurately and consistently clinical trials are categorized using two different approaches: an approach using criteria set forth in the new law (concept) or an intuitive approach (ad hoc). METHODS This was a randomized controlled trial with a method-comparison study nested in each arm. We used clinical trial protocols from eight Swiss ethics committees approved between 2010 and 2011. Protocols were randomly assigned to be categorized in one of three risk categories using the concept or the ad hoc approach. Each protocol was independently categorized by the trial's sponsor, a group of experts and the approving ethics committee. The primary outcome was the difference in categorization agreement between the expert group and sponsors across arms. Linear weighted kappa was used to quantify agreements, with the difference between kappas being the primary effect measure. RESULTS We included 142 of 231 protocols in the final analysis (concept = 78; ad hoc = 64). Raw agreement between the expert group and sponsors was 0.74 in the concept and 0.78 in the ad hoc arm. Chance-corrected agreement was higher in the ad hoc (kappa: 0.34 (95% confidence interval = 0.10-0.58)) than in the concept arm (0.27 (0.06-0.50)), but the difference was not significant (p = 0.67). LIMITATIONS The main limitation was the large number of protocols excluded from the analysis mostly because they did not fit with the clinical trial definition of the new law. CONCLUSION A structured risk categorization approach was not better than an ad hoc approach. Laws introducing risk-based approaches should provide guidelines, examples and templates to ensure correct application.

Temporal variability of damage potential on roads as a conceptual contribution towards a short-term avalanche risk simulation

The fatality risk caused by avalanches on road networks can be analysed using a long-term approach, resulting in a mean value of risk, and with emphasis on short-term fluctuations due to the temporal variability of both, the hazard potential and the damage potential. In this study, the approach for analysing the long-term fatality risk has been adapted by modelling the highly variable short-term risk. The emphasis was on the temporal variability of the damage potential and the related risk peaks. For defined hazard scenarios resulting from classified amounts of snow accumulation, the fatality risk was calculated by modelling the hazard potential and observing the traffic volume. The avalanche occurrence probability was calculated using a statistical relationship between new snow height and observed avalanche releases. The number of persons at risk was determined from the recorded traffic density. The method resulted in a value for the fatality risk within the observed time frame for the studied road segment. The long-term fatality risk due to snow avalanches as well as the short-term fatality risk was compared to the average fatality risk due to traffic accidents. The application of the method had shown that the long-term avalanche risk is lower than the fatality risk due to traffic accidents. The analyses of short-term avalanche-induced fatality risk provided risk peaks that were 50 times higher than the statistical accident risk. Apart from situations with high hazard level and high traffic density, risk peaks result from both, a high hazard level combined with a low traffic density and a high traffic density combined with a low hazard level. This provided evidence for the importance of the temporal variability of the damage potential for risk simulations on road networks. The assumed dependence of the risk calculation on the sum of precipitation within three days is a simplified model. Thus, further research is needed for an improved determination of the diurnal avalanche probability. Nevertheless, the presented approach may contribute as a conceptual step towards a risk-based decision-making in risk management.

Model for ranking freshwater fish farms according to their risk of infection and illustration for viral haemorrhagic septicaemia

We developed a model to calculate a quantitative risk score for individual aquaculture sites. The score indicates the risk of the site being infected with a specific fish pathogen (viral haemorrhagic septicaemia virus (VHSV); infectious haematopoietic necrosis virus, Koi herpes virus), and is intended to be used for risk ranking sites to support surveillance for demonstration of zone or member state freedom from these pathogens. The inputs to the model include a range of quantitative and qualitative estimates of risk factors organised into five risk themes (1) Live fish and egg movements; (2) Exposure via water; (3) On-site processing; (4) Short-distance mechanical transmission; (5) Distance-independent mechanical transmission. The calculated risk score for an individual aquaculture site is a value between zero and one and is intended to indicate the risk of a site relative to the risk of other sites (thereby allowing ranking). The model was applied to evaluate 76 rainbow trout farms in 3 countries (42 from England, 32 from Italy and 2 from Switzerland) with the aim to establish their risk of being infected with VHSV. Risk scores for farms in England and Italy showed great variation, clearly enabling ranking. Scores ranged from 0.002 to 0.254 (mean score 0.080) in England and 0.011 to 0.778 (mean of 0.130) for Italy, reflecting the diversity of infection status of farms in these countries. Requirements for broader application of the model are discussed. Cost efficient farm data collection is important to realise the benefits from a risk-based approach.

Risk Factors for Whole Carcass Condemnations in the Swiss Slaughter Cattle Population

We used meat-inspection data collected over a period of three years in Switzerland to evaluate slaughterhouse-level, farm-level and animal-level factors that may be associated with whole carcass condemnation (WCC) in cattle after slaughter. The objective of this study was to identify WCC risk factors so they can be communicated to, and managed by, the slaughter industry and veterinary services. During meat inspection, there were three main important predictors of the risk of WCC; the slaughtered animal's sex, age, and the size of the slaughterhouse it was processed in. WCC for injuries and significant weight loss (visible welfare indicators) were almost exclusive to smaller slaughterhouses. Cattle exhibiting clinical syndromes that were not externally visible (e.g. pneumonia lesions) and that are associated with fattening of cattle, end up in larger slaughterhouses. For this reason, it is important for animal health surveillance to collect data from both types of slaughterhouses. Other important risk factors for WCC were on-farm mortality rate and the number of cattle on the farm of origin. This study highlights the fact that the many risk factors for WCC are as complex as the production system itself, with risk factors interacting with one another in ways which are sometimes difficult to interpret biologically. Risk-based surveillance aimed at farms with reoccurring health problems (e.g. a history of above average condemnation rates) may be more appropriate than the selection, of higher-risk animals arriving at slaughter. In Switzerland, the introduction of a benchmarking system that would provide feedback to the farmer with information on condemnation reasons, and his/her performance compared to the national/regional average could be a first step towards improving herd-management and financial returns for producers.

ENVIRONMENTAL EXPOSURES AND LUNG CANCER RISK AMONG WOMEN IN HARRIS COUNTY, TEXAS, 1977-1980 (OCCUPATION, SMOKING, BYSTANDER)

Excessively high, accelerating lung cancer rates among women in Harris County, Texas, prompted this case-comparison study. Objectives were to compare patterns of employment, indirect exposures, and sociodemographic variables of lung cancer cases with comparison subjects (compeers) after standardizing for possible confounders, such as age and cigarette smoking. Lung cancer cases were microscopically confirmed, white, Harris County residents. Compeers, chosen from Medicare records and Texas Department of Public Safety records, were matched on gender, race, age, resident and vital status. Personal interviews were conducted with study subjects or next-of-kin. Industries and occupations were categorized as high risk, based on previous studies.^ Almost all cases (95.0%) and 60.0% of compeers smoked cigarettes. The odds ratio for lung cancer and smoking is 13.9. Stopping smoking between ages 30-50 years carries a lower risk than stopping at age 58 or more years. Women's employment in a high risk industry or occupation results in consistently elevated, smoking-adjusted odds ratios. Frequency and duration of employment demonstrate a moderate dose-response effect. A temporal association exists with employment in a high risk occupation during 1940-1949.^ No increased risk appeared with passive smoking. Husband's employment in a construction industry or a structural occupation significantly increased the smoking-adjusted odds ratios among cases and compeers (O.R. = 2.9, 2.2). Smoking-adjusted odds ratios increased significantly when women had resided with persons employed in cement (O.R. = 3.2) or insulation (O.R. = 5.5) manufacturing, or a high rise construction industry (O.R. = 2.4). A family history of lung cancer resulted in a two-fold increase in smoking-adjusted odds ratios. Vital status of compeers affected the odds ratios.^ Work-related exposures appear to increase the risk of lung cancer in women although cigarette smoking has the single highest odds ratio. Indirect exposure to certain employment also plays a significant role in lung cancer in women. Investigations of specific direct and indirect hazardous exposures in the workplace and home are needed. Cigarette smoking is as hazardous for women as for men. Smoking should be prevented and eliminated. ^

EPANET Input Files of New York tunnels and Pacific City used in a metamodel-based optimization study

Metamodels have proven be very useful when it comes to reducing the computational requirements of Evolutionary Algorithm-based optimization by acting as quick-solving surrogates for slow-solving fitness functions. The relationship between metamodel scope and objective function varies between applications, that is, in some cases the metamodel acts as a surrogate for the whole fitness function, whereas in other cases it replaces only a component of the fitness function. This paper presents a formalized qualitative process to evaluate a fitness function to determine the most suitable metamodel scope so as to increase the likelihood of calibrating a high-fidelity metamodel and hence obtain good optimization results in a reasonable amount of time. The process is applied to the risk-based optimization of water distribution systems; a very computationally-intensive problem for real-world systems. The process is validated with a simple case study (modified New York Tunnels) and the power of metamodelling is demonstrated on a real-world case study (Pacific City) with a computational speed-up of several orders of magnitude.

Reengenharia de sistemas na recuperação e modernização de produtos: proposta de um modelo baseado em risco.

Produtos com um tempo considerável de utilização podem ser objeto de um processo de manutenção mais amplo e profundo, que visa prolongar a sua vida útil. O termo recuperação é aplicado a este tipo de manutenção, que visa à substituição de peças defeituosas, desgastadas, e/ou com a vida útil encerrada. O surgimento de novos paradigmas e de um novo conjunto de doutrinas operacionais pode mudar as expectativas e necessidades das partes interessadas de modo que o produto pode ser proposto para uma modernização. Assim, o produto pode ser reengenheirado durante a sua recuperação. Para realizar um projeto de recuperação e modernização, propõe-se uma abordagem em seis passos centrada numa decisão baseada no risco para classificar os componentes de acordo com a ação a ser realizada. A análise do produto é desenvolvida com base em técnicas de desmontagem e uma análise da fase operacional é realizada para as tomadas de decisões. Deste modo, um componente pode sofrer manutenção, ser modernizado, ser excluído, ser inserido ou permanecer fora do escopo dos trabalhos. O processo da gestão baseada em risco também inclui duas fases de monitoramento de risco continuado: durante a produção e na fase de operação. As decisões podem ser revistas pelo uso da análise bayesiana. Um estudo de caso é proposto para ilustrar o modelo num programa de recuperação e modernização de veículos blindados realizada numa unidade do Exército Brasileiro. A aplicação da metodologia permitiu a seleção de uma alternativa de modernização, considerando riscos e benefícios. O desdobramento das análises no projeto detalhado permitiu a definição final do escopo de recuperação e modernização, observando efeitos de propagação de alterações de engenharia. A principal contribuição deste trabalho é a formalização de um estudo da recuperação e modernização como projeto específico, descrevendo suas características de uma forma a permitir a aplicação de um modelo baseado em risco.