Lead contamination and associated disease in captive and reintroduced red kites Milvus milvus in England

Since 1989, a red kite Milvus milvus reintroduction programme has been underway in the United Kingdom, with 4-6 week old nestlings brought into captivity and held for 6-8 weeks before reintroduction. As scavengers, red kites may consume unretrieved game, and ingest shot or lead (Pb) fragments in their prey's flesh. We evaluated exposure to Pb in captive and wild red kites by taking blood samples from 125 captive young red kites prior to release, through analysing 264 pellets (regurgitated by wild birds) collected from under a roost site, and analysing Pb concentrations in livers and/or bones of 87 red kites found dead between 1995 and 2003. Lead isotope analyses of livers were also conducted in an effort to identify Pb exposure routes. Forty-six (36.8%) kites sampled prior to release had elevated blood Pb concentrations (201-3340 microg l(-1)). The source of this Pb was probably small fragments of lead ammunition in the carcasses of birds or mammals either fed to the nestlings by their parents or, more likely, subsequently whilst in captivity. Once released, kites were also exposed to lead shot in their food, and a minimum of 1.5-2.3% of regurgitated pellets contained Pb gunshot. Seven of 44 red kites found dead or that were captured sick and died within a few days had elevated (>6 mg kg(-1) dry weight [d.w.]) liver Pb concentrations, and six of these (14%) had concentrations of >15 mg kg(-1) d.w., compatible with fatal Pb poisoning. Post-mortem analyses indicated that two of these birds had died of other causes (poisoning by rodenticide and a banned agricultural pesticide); the remaining four (9%) probably died of Pb poisoning. Bone samples from 86 red kites showed a skewed distribution of Pb concentration, and 18 samples (21%) had Pb concentrations >20 mg kg(-1) d.w., indicating elevated exposure to Pb at some stage in the birds' life. Lead isotopic signatures (Pb (208/206); Pb (206/207)) in liver samples of the majority of kites were compatible with those found in lead shot extracted from regurgitated pellets. Lead isotope ratios found in the livers of kites with very low Pb concentrations were distinct from UK petrol Pb isotopic signatures, indicating that birds were exposed to little residual petrol Pb. We conclude that the primary source of Pb to which red kites are exposed is lead ammunition (shotgun pellets or rifle bullets), or fragments thereof, in their food sources; in some cases exposure appears sufficient to be fatal. We make recommendations to reduce Pb poisoning in both captive and wild red kites and other scavenging species.

Lead isotopes and lead shot ingestion in the globally threatened marbled teal (Marmaronetta angustirostris) and white-headed duck (Oxyura leucocephala)

Lead isotope ratios ((206)Pb/(207)Pb and (208)Pb/(207)Pb) and concentrations in the livers and bones of marbled teal and white-headed duck found dead or moribund were determined in order to establish the main lead source in these waterfowl species. Lead concentrations in bone (dry weight) and liver (wet weight) were found to be very high in many of the white-headed ducks (bone: geometric mean=88.9 ppm, maximum=419 ppm; liver: geometric mean=16.8 ppm, maximum=57.0 ppm). Some of the marbled teal had high lead levels in the bones but liver lead levels were all low (bone: geometric mean=6.13 ppm, maximum=112 ppm; liver: geometric mean=0.581 ppm, maximum=4.77 ppm). Ingested lead shot were found in 71% of the white-headed duck and 20% of the marbled teal. The (206)Pb/(207)Pb ratio in livers and bones of white-headed ducks and marbled teals showed no significant differences compared to the ratios obtained from lead shot. The (206)Pb/(207)Pb ratio in bones of marbled teal ducklings with the highest lead concentrations tended to resemble the ratios of lead shot, which supports our hypothesis that the lead was derived from the hens. We also found that the lead ratios of lead shot and lead ratios described for soils in the area overlapped, but also that the isotopic ratio (206)Pb/(207)Pb in lead shot used in Spain has a narrow range compared with those used in North America. The principal source of lead in many of these birds was, however, most likely lead shot, as supported by the similar isotopic ratios, high lead concentrations in tissues and evidence of ingested shot.

Delay times and rates for Type Ia supernovae and thermonuclear explosions from double-detonation sub-Chandrasekhar mass models

We present theoretical delay times and rates of thermonuclear explosions that are thought to produce Type Ia supernovae (SNe Ia), including the double-detonation sub-Chandrasekhar mass model, using the population synthesis binary evolution code startrack. If detonations of sub-Chandrasekhar mass carbon-oxygen white dwarfs following a detonation in an accumulated layer of helium on the white dwarf's surface ('double-detonation' models) are able to produce thermonuclear explosions which are characteristically similar to those of SNe Ia, then these sub-Chandrasekhar mass explosions may account for at least some substantial fraction of the observed SN Ia rate. Regardless of whether all double-detonations look like 'normal' SNe Ia, in any case the explosions are expected to be bright and thus potentially detectable. Additionally, we find that the delay time distribution of double-detonation sub-Chandrasekhar mass SNe Ia can be divided into two distinct formation channels: the 'prompt' helium-star channel with delay times

Arsenic, cadmium, and lead pollution and uptake by rice (Oryza sativa L.) grown in greenhouse

Purpose: Hunan province is well-known for its extensive base-metal extraction and smelting industries. However, the legacies of excavation operations, transportation, and selective smelting activities within Hunan have resulted in the generation of large quantities of mine wastes, which will become the sources of metal contamination in the environment. Thus, there is an increasingly important health issue underlying the study of arable land pollution and transfer of As, Cd, and Pb in the paddy soil–rice system.
Materials and methods: Paddy soils collected from mining- and smelting-impacted areas in Hunan province and rice seed (Oryza sativa L. cv Jia Hua-1) were used for pot experiments under greenhouse conditions. One 30-day-old seedling was transplanted into one pot containing 5.0 kg pretreated soil. At harvest, rice grains and shoots were washed with distilled water to remove surface soil, and oven-dried at 65°C for 96 h until a constant weight was reached. Roots were washed carefully with distilled water for the next process of extracting iron plaque using dithionite–citrate–bicarbonate solution. Total concentrations of As, Cd, and Pb in soil and rice plant tissues were measured by inductively coupled plasma mass spectrometer.
Results and discussion: Total concentrations of As, Cd, and Pb in the soils collected from 12 mining- and smelting-impacted areas in Hunan province were much higher than Hunan background values and exceeded the maximum concentration limit for soils set by the Ministry of Environmental Protection. The yields of rice grain from Pb/Zn mining and smelting sites were negatively correlated to overall pollution scores. Distributions of As, Cd, and Pb in rice plant followed: root >> shoot > husk > whole grain. About 30.1–88.1% of As, 11.2–43.5% of Cd, and 14.0–33.9% of Pb were accumulated in iron plaque on root surfaces.
Conclusions: High concentrations of As, Cd, and Pb are observed in paddy soils from mining- and smelting-impacted areas in Hunan province, indicating those paddy soils suffer serious combined heavy metal contamination. In particular, Cd is the dominant contaminant followed by As and Pb in paddy soils from most locations. The distributions of As, Cd, and Pb in rice tissue were: root >> shoot > husk > whole grain. Concentrations of Pb in all whole grain and of As and Cd in 50% of whole grain samples exceeded Chinese Hygienic Standard values for food.

A Lead-Free and High-Energy Density Ceramic for Energy Storage Applications

In this work, we demonstrate a very high-energy density and high-temperature stability capacitor based on SrTiO3-substituted BiFeO3 thin films. An energy density of 18.6 J/cm3 at 972 kV/cm is reported. The temperature coefficient of capacitance (TCC) was below 11% from room temperature up to 200°C. These results are of practical importance, because it puts forward a promising novel and environmentally friendly, lead-free material, for high-temperature applications in power electronics up to 200°C. Applications include capacitors for low carbon vehicles, renewable energy technologies, integrated circuits, and for the high-temperature aerospace sector. © 2013 Crown copyright

The determination of optimal processing conditions for PLA and PLA/CaCO3 in twin screw extrusion using DoE and multivariate analysis

Biodegradable polymers, such as PLA (Polylactide), come from renewable resources like corn starch and if disposed of correctly, degrade and become harmless to the ecosystem making them attractive alternatives to petroleum based polymers. PLA in particular is used in a variety of applications including medical devices, food packaging and waste disposal packaging. However, the industry faces challenges in melt processing of PLA due to its poor thermal stability which is influenced by processing temperatures and shearing.
Identification and control of suitable processing conditions is extremely challenging, usually relying on trial and error, and often sensitive to batch to batch variations. Off-line assessment in a lab environment can result in high scrap rates, long lead times and lengthy and expensive process development. Scrap rates are typically in the region of 25-30% for medical grade PLA costing between €2000-€5000/kg.
Additives are used to enhance material properties such as mechanical properties and may also have a therapeutic role in the case of bioresorbable medical devices, for example the release of calcium from orthopaedic implants such as fixation screws promotes healing. Additives can also reduce the costs involved as less of the polymer resin is required.
This study investigates the scope for monitoring, modelling and optimising processing conditions for twin screw extrusion of PLA and PLA w/calcium carbonate to achieve desired material properties. A DAQ system has been constructed to gather data from a bespoke measurement die comprising melt temperature; pressure drop along the length of the die; and UV-Vis spectral data which is shown to correlate to filler dispersion. Trials were carried out under a range of processing conditions using a Design of Experiments approach and samples were tested for mechanical properties, degradation rate and the release rate of calcium. Relationships between recorded process data and material characterisation results are explored.

Selection and combination of biomarkers to control and prevent the risk of occupational exposure to the mixture of lead, arsenic and manganese

Tese de doutoramento, Farmácia (Toxicologia), Universidade de Lisboa, Faculdade de Farmácia, 2014

Studying Your Own Country. Social Scientific Knowledge For Our Times and Places; Presidential Address to the Canadian Political Science Association, St Catharines, May 28, 2014

Political science is both a generalizing and an anchored, nationally defined, discipline. Too often, the first perspective tends to crowd out the latter, because it appears more prestigious, objective, or scientific. Behind the international/national dichotomy, there are indeed rival conceptions of social science, and important ontological, epistemological and methodological assumptions. This article discusses these assumptions and stresses the critical contribution of idiographic, single-outcome studies, the importance of producing relevant, usable knowledge, and the distinctive implications of studying one’s own country, where a scholar is also a citizen, involved in more encompassing national conversations. The aim is not to reject the generalizing, international perspective, or even the comparative approach, but rather to reaffirm the importance of maintaining as well, and in fact celebrating, the production of social scientific knowledge directly relevant for our own times and places.

T-Policy in Reliability and Inventory

In this thesis T-policy is implemented to the inventory system with random lead time and also repair in the reliability of k-out-of-n system. Inventory system may be considered as the system of keeping records of the amounts of commodities in stock. Reliability is defined as the ability of an entity to perform a required function under given conditions for a given time interval. It is measured by the probability that an entity E can perform a required function under given conditions for the time interval. In this thesis considered k-out-of-n system with repair and two modes of service under T-policy. In this case first server is available always and second server is activated on elapse of T time units. The lead time is exponentially distributed with parameter  and T is exponentially distributed with parameter  from the epoch at which it was inactivated after completion of repair of all failed units in the previous cycle, or the moment n-k failed units accumulate. The repaired units are assumed to be as good as new. In this study , three different situations, ie; cold system, warm system and hot system. A k-out-of-n system is called cold, warm or hot according as the functional units do not fail, fail at a lower rate or fail at the same rate when system is shown as that when it is up.

Investigations On The Preparation And Properties Of Reactively Evaporated Lead Sulphide And Tin Telluride Thin Films

The work reported in this thesis is the preparation, and the structural, electrical and optical properties of reactively evaporated lead sulphide and tin telluride thin films. The three temperature method had been used for the preparation of these semiconductor thin films. In this preparation technique constituent elements are evaporated from separate sources with the substrate kept at a particular temperature. when one of the constituent element is a gas near room temperature, the method is often called reactive evaporation. It has been found for many materials that a stoichiometric interval exists with a limited range of flux and substrate temperature. Usually this technique is used for the preparation of thin films of high melting point compounds or of materials which decompose during evaporation. Tin telluride and lead sulphide are neither high melting point materials nor do they decompose on melting. But even than reactive evaporation offers the possibility of changing the ratios of the flux of the constituent elements within a wide range and studying its effect on the properties of the films

Beyond Student Voice : Patterns of Partnership and the Demands of Deep Democracy. 'Más allá de la voz del alumnado : patrones de colaboración y las exigencias de la democracia profunda'.

Monográfico con el título: 'Las posibilidades de la voz del alumnado para el cambio y la mejora educativa'. Resumen basado en el de la publicación