874 resultados para Propriedades físico-químicas


Relevância:

100.00% 100.00%

Publicador:

Resumo:

The dried beef is a food traditionally eaten by Northeastern and has an extensive trade in the city of Natal-RN. It is usually produced in an empirical manner, without any standardization in production. Characterized as partially dehydrated meat product, so that the activity of water present is not sufficient to prevent microbial growth, degradation or the production of microbial toxins. The guarantee that the market dried beef is to provide a quality product hygienic, microbiological, physicochemical and sensory stable and adequate for the safety and consumer satisfaction, which has been increasingly attracted to food with natural preservatives. Thus, the meat industries are replacing the current seasonings and natural preservatives for similar, with it without affecting the shelf life of products. Lactic acid has been used to meet these requirements. In this sense, this study aimed to evaluate the effect of lactic acid on the physico-chemical, microbiological and sensory, besides knowing the consumer profile of dried meat of the City of Natal / RN. The results demonstrated that the use of lactic acid in concentrations of 1% and 2% during the processing of dried meat, had statistically significant effect (p < 0.05) on the physico-chemical (pH and water activity) and consequently reduced the microbial count does not alter the taste of the new product developed. Regarding the results on the consumer profile, it was found that the majority of respondents (71.75%) did not observe the presence of the stamp of the Federal Inspection Service (SIF) to buy this meat food that 81.55% of consumers check the hygiene conditions of the site and handlers, however, a large proportion of respondents not concerned with the guarantee of origin of typical regional products featuring a hazard to food safety for consumers of the city of Natal-RN

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Cutting fluids are lubricants used in metal-mechanical industries. Their complex composition varies according to the type of operation carried out, also depending on the metals under treatment or investigation. Due to the high amount of mineral oil produced in Northeastern Brazil, we have detected the need to better use this class of material. In this work, two novel formulations have been tested, both based on naphthenic mineral oil and additives, such as: an emulsifying agent (A), an anticorrosion agent (B), a biocide (C) and an antifoam agent (D). Each formulation was prepared by mixing the additives in the mineral oil at a 700-rpm stirring velocity for 10 min, at 25°C, employing a 24 factorial planning. The formulations were characterized by means of density, total acid number (TAN), viscosity, flash point and anticorrosion activity. In a subsequent study, oil-in-water emulsions were prepared from these novel formulations. The emulsions were analyzed in terms of stability, corrosion degree, percentage of foam formation, conductivity, accelerated stability and particle size. The samples were appropriately labeled, and, in special, two of them were selected for featuring emulsion properties which were closer to those of the standards chosen as references (commercial cutting oils). Investigations were undertaken on the ability of NaCl and CaCl2 to destabilize the emulsions, at concentrations of 2%, 5% and 10%, at an 800-rpm stirring velocity for 5 min and temperatures of 25º, 40º, 50º and 60ºC. The recovered oils were chemically altered by reincorporating the same additives used in the original formulations, followed by preparation of emulsions with the same concentrations as those of the initial ones. The purpose was to assess the possibility of reusing the recovered oil. The effluents generated during the emulsion destabilization step were characterized via turbidity index, contents of oil and grease, pH, and contents of anions and cations, observing compliance with the parameters established by the current environmental legislation (Brazil s CONAMA 357/05 resolution). It could be concluded that the formulations presented excellent physicochemical properties as compared to commercial cutting fluids, showing that the quality of the newly-prepared fluids is superior to that of the formulations available in the market, enabling technically and environmentally-safe applications

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The pulps are products that add economic value enjoy the fruits of the surplus productions of the same. Have good market acceptance because of its practicality and diversity of flavors available year round. In order to assess the quality of the fruit pulp through the physical and chemical parameters and the characteristics of manufacturing industry, we analyzed 36 samples of frozen fruit pulp of three brands marketed in RIO Grande do Norte, 14 brand A, 12 of 10 brand B and brand C, which corresponded to 14 different flavors, of which 10 have identity Standards and Quality (ISQ S) established by the Ministério da Agricultura, Pecuária e Abastecimento (MAPA), totaling 27 samples with ISQ s. We conducted the following physicalchemical analyzes on samples of fruit pulp: Total solids, total soluble solids, pH, titratable acidity, total sugars and the determination of ascorbic acid. The percentage of failure for each parameter evaluated was 37, 04% in total soluble solids, 22,22% for total solids and titratable acidity, 7,40% in relation to pH. The total sugars were within the requirements demanded by the MAPA and ascorbic acid content, determined only in the pulp of acerola and cashew, presented a non compliance in the pulp of brand B. The percentage of failures of the pulps with ISQ S was 59% with brand A, B and C accounted for 3,70%, 33,33% and 22,22% respectively. The pulps which have no established atandards such as pineapple pulp, showed similar values between brands and literature data unlike the pulp of plum, jackfruit and tamarind which diverged greatly in parameters such as total solids and total soluble solids. The study demonstrates the need for greater quality control by the producers with respect to raw materials, processing, packing, stored and the importance of ISQ S to establish the flavors have not yet covered by existing legislation, but already highly commercialized

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

O objetivo deste trabalho foi avaliar: (i) a relação entre a degradação de pastagens de colonião manejadas com queima, e as modificações nas propriedades físicas e morfológicas de um Argissolo Vermelho-Amarelo da Amazônia; (ii) o crescimento radicular de pastagens com diferentes níveis de degradação; (iii) o potencial de recuperação de pastagens degradadas de colonião com a introdução de andropógon. Numa propriedade rural da Região de Marabá, PA, foram estudados quatro tipos de pastagem: pastagem produtiva de colonião (Panicum maximum Jacq.); pastagem de colonião em declínio produtivo; pastagem de colonião degradada (capoeira); pastagem de colonião degradada e recuperada com andropógon (Andropogon gayanus Kunth). Como referência das propriedades do solo antes do desmatamento, estudou-se, também, uma reserva de mata nativa. A queima das pastagens foi prática usual, e apesar disso, estas não foram adubadas. A degradação da pastagem diminuiu a cobertura do solo e o deixou exposto à chuva e ao pisoteio do gado, o que resultou em aumento da densidade do solo na camada superficial e diminuição do grau de floculação da argila e da porosidade total. A diminuição da produção da parte aérea na pastagem degradada foi acompanhada de diminuição do número de raízes no perfil do solo, e da concentração do sistema radicular próximo à superfície. O andropógon demonstrou bom potencial para recuperação das áreas de pastagens degradadas, na Região Amazônica.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The region of Aracá River (Middle and Upper Rio Negro-AM) has peculiar characteristics, having soils with atypical profile and high organic matter contents in great deep. The levels of aluminum and iron in the soil samples increased as a function of depth and concentrations of mercury ranged from 0.097 to 0.964 µg g-1. Statistical analysis showed the degree of similarity between soil samples collected. The highest concentrations of mercury in soil samples are directly related to soil higher content of organic matter, directly influencing the fate and bioavailability of mercury species to the environment.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Compararam-se a espectroscopia de ultra-som (US) e os métodos tradicionais (MT) utilizados para a determinação de características físico-químicas do leite e estimaram-se as correlações entre esses métodos e suas acurácias. As características densidade, extrato seco desengordurado (ESD), teor de proteínas e teor de gordura foram determinadas em 65 amostras de leite cru por ambos os métodos. As densidades médias determinadas pelo US e pelos MT não diferiram entre si (P=0,14), e a correlação encontrada entre os dois métodos para a determinação da densidade não foi significativa (P= 0,08). Os teores médios de ESD, proteína e gordura encontrados pelo US e pelos MT foram diferentes (P=0,04, P<0,0001 e P<0,0001, respectivamente), as correlações entre os dois métodos utilizados para a análise dessas características foram positivas e significativas (r=0,0109, r=0,0007, r= <0,0001, respectivamente) e as acurácias dos métodos para essas determinações foram de 0,160, 0,062 e 0,145, respectivamente. Foi determinada a equação de regressão linear, que associa o teor de gordura obtido no método de espectroscopia de ultra-som ao do método butirométrico, que apresentou coeficiente de determinação de 0,5936.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The instability of cassava culinary quality is a problem in the market. This work had the purpose of evaluating the interference of the productivity, rain precipitation and physical-chemical characteristics on the cooking time of the IAC 576-70 cultivar, from the 6(th) to the 12(th) month after the planting. The physical parameters evaluated were: difficulty in peeling (easy, medium, and hard), difficulty in cutting in long, thin sticks with a manual machine, being those cut in a subjective way. In the analysis of the cooked root, the percentage of water absorbed into the cassava pieces, the color, white points formed inside the pieces of cassava, gel formation around the pieces of cassava, and cooking time were evaluated. The pH, acidity, moisture, ashes, fibers, ether extract, protein, reducing sugars, and starch of the roots were also monthly evaluated. From the results obtained in the present work, it may be concluded that the cassava IAC 576-70, when planted in July, in Botucatu-SP area, must be harvested at the age of nine months, without damage to the productivity, starch level and root cooking, and the harvest could be extended up to ten months. The producers should follow the sum of precipitation index ten days before the harvest, and this value should be the smallest as it may be and the producers should not harvest when this value is more than 100 mm, in order not to hinder the cooking of the root.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

One hundred twenty-six milk samples from 63 apparently healthy cows, but positive in the California Mastitis Test were submitted to determinations of pH, acidity, density, butter-fat, total solids, non-fat solids, cryoscopic point, caseine level, chloride level and polymorphonuclear leukocytes. Forty-one cows were infected by coagulase-positive Staphylococcus and 22 by coagulase-negative Staphylococcus. The results obtained in the milk sample analysis from the healthy quarters and infected by coagulase-positive Staphylococcus showed variations of all constituents investigated. However only the pH values (F=4.17*) and the polymorphonuclear leukocytes (F=11.35**) showed significant differences. On the other hand, between the milk samples from healthy quarters and infected quarters by coagulase-negative Staphylococcus, only the polymorphonuclear leukocytes (F=16.29**) showed significant differences.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The objective of this study was to evaluate the effect of beta-lactoglobulin polymorphism, breed and seasonality on physico-chemical characteristics and stability of bovine milk. Six Holstein-Zebu (H-Z) and five Holstein dairy herds were selected, of which 660 Holstein and 293 crossbred Holstein-Zebu milk and blood samples were collected, adding up 953 samples, distributed in two collecting periods at rainy and two at dry seasons. Each milk sample was analyzed for titratable acidity, pH, freezing point and milk ethanol stability, at the following ethanol concentrations: 70, 76, 80 and 84GL. Individual blood samples were submitted to polymerase chain reaction (PCR) for the determination of beta-lactoglobulin polymorphism. No effect of beta-lactoglobulin polymorphism was observed in physico-chemical characteristics of milk, in both studied breed. Breed effect for Holstein and H-Z, respectively, was observed on titratable acidity (16.16 and 17.07°D, while effect of seasonality (for rainy and dry seasons, respectively) was also observed on freezing point (-0.5411 and -0.5376°H). Effects of breed and seasonality on milk stability were observed (Holstein-Zebu milk was less stable on dry season), however, no effect of beta-lactoglobulin on milk stability was observed.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The compaction behavior of powdered solids used in tablets can be dominated by the physical-chemical properties of the excipients because, frequently, they are present in much larger amounts than the drug in tablet formulation. The aim of this study was to evaluate the influence of the size of lactose granules on the physical characteristics of tablets produced in punches of various diameters, since this relation has not been explored in the literature. Granules were produced in several sizes by wet granulation and compressed in punches of different diameters by applying different forces. Size distribution, apparent density and flow of granules were evaluated, as well as the physical characteristics of the tablets (weight, friability, hardness and disintegration time). The results indicate that in situations where excipient characteristics predominate due to low drug content, as in the 7 mm punch, the selection of granule size is important for the mechanical strength of tablet. On the other hand, with the 9, 11 and 13mm punches, it was possible to produce strong tablet from all sizes of granules.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The intensive use of the land for agricultural propose causes a series of modifications in attributes, which can take to soil degradation. In this context, the main goal of this research was to evaluate the influence of the soil tillage systems and management on its physical and hydric characteristics. The evaluations were carried out in July of 1999, at experimental plots of a Latossolo vermelho, a clay oxisoil, in the Faculdade de Engenharia Agrícola of the UNICAMP, at the county of Campinas, state of São Paulo. These plots were managed with the following treatments, along a period of eight years: no-tillage, chisel ploughing, conventional system with disk ploughing and revolving hoe. The evaluated physical and hydric parameters of the soil were: soil bulk density, particle density, total porosity, macro-porosity, micro-porosity, soil-water retention curve, hydraulic conductivity and basic infiltration. Significant differences were observed between the treatments on soil bulk density, infiltration, total porosity, macro-porosity and the micro-porosity. The chisel ploughing and no-tillage systems presented the higher values of soil bulk density; nevertheless in these conservationist systems were observed the higher values of basic infiltration.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The present study evaluated the effect of the use of natural antioxidants in different spent hens processed meat, the physical-chemical and sensory characteristics of product were analyzed. The experiment was conducted at the Technology Laboratory of Animal Products, Department of Technology - FCAV/Unesp - Campus of Jaboticabal. Forty-five laying hens with approximately 80 weeks of age were used, distributed in a completely randomized experimental design in a 4x4 factorial arrangement, 4 condiment types (control, rosemary, clove and oregano, and the last three natural antioxidants) and 4 storage times (0; 3; 6 and 9 days at 4°C), with sixteen treatments and tree repetitions. It were evaluated the characteristics of humidity, pH, color, cooking loss, shear force, TBARS number and sensory analyze. The averages were obtained by Tukey test 5% of significance. The results showed an interaction between the storage time and condiments types in all analyzed parameters. It was concluded that oregano use decreased the processed meat oxidation, also pleased the judges in sensory analysis. The lowest notes in sensory analysis were obtained with the treatment that contained clove.