A proposed parameterization of interface discontinuity factors depending on neighborhood for pin-by-pin diffusion computations for LWR

There exists an interest in performing full core pin-by-pin computations for present nuclear reactors. In such type of problems the use of a transport approximation like the diffusion equation requires the introduction of correction parameters. Interface discontinuity factors can improve the diffusion solution to nearly reproduce a transport solution. Nevertheless, calculating accurate pin-by-pin IDF requires the knowledge of the heterogeneous neutron flux distribution, which depends on the boundary conditions of the pin-cell as well as the local variables along the nuclear reactor operation. As a consequence, it is impractical to compute them for each possible configuration. An alternative to generate accurate pin-by-pin interface discontinuity factors is to calculate reference values using zero-net-current boundary conditions and to synthesize afterwards their dependencies on the main neighborhood variables. In such way the factors can be accurately computed during fine-mesh diffusion calculations by correcting the reference values as a function of the actual environment of the pin-cell in the core. In this paper we propose a parameterization of the pin-by-pin interface discontinuity factors allowing the implementation of a cross sections library able to treat the neighborhood effect. First results are presented for typical PWR configurations.

Parameterization of the atmospheric boundary layer for offshore wind resource assessment with a limited length-scale k-ε model

The structure of the atmospheric boundary layer (ABL) is modelled with the limited- length-scale k-ε model of Apsley and Castro. Contrary to the standard k-ε model, the limited-length-scale k-ε model imposes a maximum mixing length which is derived from the boundary layer height, for neutral and unstable atmospheric situations, or by Monin-Obukhov length when the atmosphere is stably stratified. The model is first verified reproducing the famous Leipzig wind profile. Then the performance of the model is tested with measurements from FINO-1 platform using sonic anemometers to derive the appropriate maximum mixing length.

Ampliación de un portal Wordpress para el diseño de cursos basados en la metodología PBL

La metodología PBL propone el aprendizaje basado en problemas. A grandes rasgos sugiere que el estudiante sea el protagonista de su propio aprendizaje mediante el desarrollo de proyectos. Con esa idea, el grupo de innovación educativa DMAE-DIA (Desarrollo de nuevas Metodologías de Aprendizaje/Evaluación del Departamento de Informática Aplicada), comenzó la construcción de un portal web para mostrar los principios de dicha metodología, que permitiese a los usuarios del mismo conocerla y aprender a utilizarla en un entorno colaborativo. El objetivo de este trabajo es ampliar este portal para que los usuarios sean capaces de crear, eliminar y mantener sus propios proyectos para posteriormente utilizarlos como base para su práctica docente. El trabajo se ha planteado siguiendo el paradigma de la orientación a objetos, mediante la metodología UML y siguiendo el ciclo de vida del software y se ha implementado utilizando como base el CMS Wordpress y desarrollando con los lenguajes que más adelante se especificarán. Wordpress por su parte es un sistema de gestión de contenidos dotado de gran potencia que permite, de una manera muy sencilla, construir entornos web con el mínimo esfuerzo. ABSTRACT The PBL methodology proposed problem-based learning. Roughly suggests that the student is the protagonist of their own learning by developing projects. With that, the group of educational innovation DMAE-DIA (Development of new Learning/Assessment methodologies, Department of Applied Computing) began building a web portal to show the principles of this methodology, which would allow users to know and learn to use it in a collaborative environment. The aim of this work is to extend this website so that users are able to create, delete and maintain their own projects for later use as the basis for their teaching practice. The work has been raised following the paradigm of object orientation, by following the UML methodology and software life cycle and has been implemented using as a basis the CMS Wordpress and developed with the languages that will be specified later. Meanwhile Wordpress is a content management system endowed with great power that allows,in a very simple way to build web environments with minimal effort.

A web-based application for the management and evaluation of tutoring requests in PBL-based massive laboratories

One important steps in a successful project-based-learning methodology (PBL) is the process of providing the students with a convenient feedback that allows them to keep on developing their projects or to improve them. However, this task is more difficult in massive courses, especially when the project deadline is close. Besides, the continuous evaluation methodology makes necessary to find ways to objectively and continuously measure students' performance without increasing excessively instructors' work load. In order to alleviate these problems, we have developed a web service that allows students to request personal tutoring assistance during the laboratory sessions by specifying the kind of problem they have and the person who could help them to solve it. This service provides tools for the staff to manage the laboratory, for performing continuous evaluation for all students and for the student collaborators, and to prioritize tutoring according to the progress of the student's project. Additionally, the application provides objective metrics which can be used at the end of the subject during the evaluation process in order to support some students' final scores. Different usability statistics and the results of a subjective evaluation with more than 330 students confirm the success of the proposed application.

NURBS-Based Geometry Parameterization for Aerodynamic Shape Optimization

La motivación de esta tesis es el desarrollo de una herramienta de optimización automática para la mejora del rendimiento de formas aerodinámicas enfocado en la industria aeronáutica. Este trabajo cubre varios aspectos esenciales, desde el empleo de Non-Uniform Rational B-Splines (NURBS), al cálculo de gradientes utilizando la metodología del adjunto continuo, el uso de b-splines volumétricas como parámetros de diseño, el tratamiento de la malla en las intersecciones, y no menos importante, la adaptación de los algoritmos de la dinámica de fluidos computacional (CFD) en arquitecturas hardware de alto paralelismo, como las tarjetas gráficas, para acelerar el proceso de optimización. La metodología adjunta ha posibilitado que los métodos de optimización basados en gradientes sean una alternativa prometedora para la mejora de la eficiencia aerodinámica de los aviones. La formulación del adjunto permite calcular los gradientes de una función de coste, como la resistencia aerodinámica o la sustentación, independientemente del número de variables de diseño, a un coste computacional equivalente a una simulación CFD. Sin embargo, existen problemas prácticos que han imposibilitado su aplicación en la industria, que se pueden resumir en: integrabilidad, rendimiento computacional y robustez de la solución adjunta. Este trabajo aborda estas contrariedades y las analiza en casos prácticos. Como resumen, las contribuciones de esta tesis son: • El uso de NURBS como variables de diseño en un bucle de automático de optimización, aplicado a la mejora del rendimiento aerodinámico de alas en régimen transónico. • El desarrollo de algoritmos de inversión de punto, para calcular las coordenadas paramétricas de las coordenadas espaciales, para ligar los vértices de malla a las NURBS. • El uso y validación de la formulación adjunta para el calculo de los gradientes, a partir de las sensibilidades de la solución adjunta, comparado con diferencias finitas. • Se ofrece una estrategia para utilizar la geometría CAD, en forma de parches NURBS, para tratar las intersecciones, como el ala-fuselaje. • No existen muchas alternativas de librerías NURBS viables. En este trabajo se ha desarrollado una librería, DOMINO NURBS, y se ofrece a la comunidad como código libre y abierto. • También se ha implementado un código CFD en tarjeta gráfica, para realizar una valoración de cómo se puede adaptar un código sobre malla no estructurada a arquitecturas paralelas. • Finalmente, se propone una metodología, basada en la función de Green, como una forma eficiente de paralelizar simulaciones numéricas. Esta tesis ha sido apoyada por las actividades realizadas por el Área de Dinámica da Fluidos del Instituto Nacional de Técnica Aeroespacial (INTA), a través de numerosos proyectos de financiación nacional: DOMINO, SIMUMAT, y CORESFMULAERO. También ha estado en consonancia con las actividades realizadas por el departamento de Métodos y Herramientas de Airbus España y con el grupo Investigación y Tecnología Aeronáutica Europeo (GARTEUR), AG/52. ABSTRACT The motivation of this work is the development of an automatic optimization strategy for large scale shape optimization problems that arise in the aeronautics industry to improve the aerodynamic performance; covering several aspects from the use of Non-Uniform Rational B-Splines (NURBS), the calculation of the gradients with the continuous adjoint formulation, the development of volumetric b-splines parameterization, mesh adaptation and intersection handling, to the adaptation of Computational Fluid Dynamics (CFD) algorithms to take advantage of highly parallel architectures in order to speed up the optimization process. With the development of the adjoint formulation, gradient-based methods for aerodynamic optimization become a promising approach to improve the aerodynamic performance of aircraft designs. The adjoint methodology allows the evaluation the gradients to all design variables of a cost function, such as drag or lift, at the equivalent cost of more or less one CFD simulation. However, some practical problems have been delaying its full implementation to the industry, which can be summarized as: integrability, computer performance, and adjoint robustness. This work tackles some of these issues and analyse them in well-known test cases. As summary, the contributions comprises: • The employment of NURBS as design variables in an automatic optimization loop for the improvement of the aerodynamic performance of aircraft wings in transonic regimen. • The development of point inversion algorithms to calculate the NURBS parametric coordinates from the space coordinates, to link with the computational grid vertex. • The use and validation of the adjoint formulation to calculate the gradients from the surface sensitivities in an automatic optimization loop and evaluate its reliability, compared with finite differences. • This work proposes some algorithms that take advantage of the underlying CAD geometry description, in the form of NURBS patches, to handle intersections and mesh adaptations. • There are not many usable libraries for NURBS available. In this work an open source library DOMINO NURBS has been developed and is offered to the community as free, open source code. • The implementation of a transonic CFD solver from scratch in a graphic card, for an assessment of the implementability of conventional CFD solvers for unstructured grids to highly parallel architectures. • Finally, this research proposes the use of the Green's function as an efficient paralellization scheme of numerical solvers. The presented work has been supported by the activities carried out at the Fluid Dynamics branch of the National Institute for Aerospace Technology (INTA) through national founding research projects: DOMINO, SIMUMAT, and CORESIMULAERO; in line with the activities carried out by the Methods and Tools and Flight Physics department at Airbus and the Group for Aeronautical Research and Technology in Europe (GARTEUR) action group AG/52.

Aprendizaje basado en proyectos (PBL) aplicado a la docencia de sistemas tecnológicos de última generación

El planteamiento general de la docencia de asignaturas cuyo contenido es eminentemente tecnológico, presenta el reto del constante y rápido cambio asociado a los avances en desarrollo tecnológico. Dentro de este contexto, se plantea emplear un método basado en la generación de herramientas que permitan un seguimiento autónomo de los cambios frente a opciones más descriptivas del estado actual de los sistemas estudiados. Sobre esta base, se estudia la idoneidad de un contexto basado en el desarrollo de proyectos que, si bien tienen necesariamente que abordar una temática particular, supone una forma a priori interesante de generar las habilidades necesarias para el aprendizaje autónomo y continuado.

O sistema PBL, problem-based learning, no ensino de medicina no Brasil : análise bibliográfica sobre a sua execução

Introdução: Entre as estratégias de ensino e aprendizagem utilizadas nas práticas pedagógicas, a Problem Based Learning (PBL) (Aprendizagem Baseada em Problemas) é utilizada desde 1960, em especial nos cursos de Medicina. Mesmo sendo uma estratégia valiosa, um dos seus obstáculos é a pouca prática dos alunos em atividades autodirigidas, pesquisa e construção coletiva do conhecimento. Objetivo: Rastrear elementos constitutivos da PBL através de dados colhidos em artigos pesquisados em sítios de divulgação científica; Avaliar, nos estudos selecionados, os aspectos positivos e negativos que estejam relacionados com a metodologia do Sistema PBL aplicada ao ensino médico no Brasil. Metodologia: Estudo bibliográfico de 13 textos utilizando um modelo de desconstrução, denominada Análise Textual Discursiva (ATD) que consiste em: transformação dos artigos em pedaços menores; análise textual; identificação de padrões convergentes e divergentes em relação a PBL; organização e síntese dos dados, culminando com a elaboração de estratégia adaptativa da PBL para o curso de Medicina. Resultados: Foram encontradas 116 citações que convergiam para referências positivos acerca da metodologia PBL e 40 citações que divergiam acerca dos pontos positivos. Os aspectos positivos como o desenvolvimento de atitudes e habilidades; desenvolvimento de competências anteriores ao curso; efeitos positivos depois de terminada a graduação, como autonomia de estudo e a articulação entre currículo e realidade profissional, representam pontos a serem reforçados na aula. Em contraponto, foi observado que dentre os negativos a não compreensão do papel do professor como tutor; necessidade de conteúdo formal tradicional pelos alunos e a expectativa que o professor retire as suas dúvidas são pontos a serem evitados. Conclusões: A metodologia PBL deverá servir como metodologia ativa para aproveitar ao máximo as habilidades que os alunos já apresentam, potencializando o aprendizado na educação médica em sala de aula. Palavras-Chave: PBL; curso de medicina; metodologia ativa; educação médica.

A study of stratosphere-to-troposphere transfer using radioactive tracer data in a one-dimensional parameterization /

"Report no. FAA-EE-80-06."