Efeito do processo de descafeinação de café arábica em meio aquoso auxiliado por ultrassom sobre a composição química e o perfil sensorial

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Características químico-mineralógicas e cerâmicas da matéria-prima utilizada pelo polo cerâmico de Rio Verde de Mato Grosso, MG

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Atividade antioxidante do extrato seco de cacau orgânico (Theobroma cacao): estudo de estabilidade e teste de aceitação de cremes acrescidos deste extrato

Conselho Nacional de Desevolvimento Científico e Tecnológico (CNPq)

Da margem ao centro dos holofotes: o arcabouço legal dos/as catadores/as de material reiclável e reutilizável

Pós-graduação em Serviço Social - FCHS

Bamboo as sustainable material used in design and civil construction: species, management, characterization and applications

The use of bamboo as construction and raw material for producing products can be considered a feasible alternative to the abusive use of steel, concrete and oil byproducts. Its use can also reduce the pressure on the use of wood from native and planted forests. Although there are thousands of bamboo species spread about the world and Brazil itself has hundreds of native species, the use and basic knowledge of its characteristics and applications are still little known and little disseminated. This paper's main objective is to introduce the species, the management phases, the physical and mechanical characteristics and the experiences in using bamboo in design and civil construction as per the Bamboo Project implemented at UNESP, Bauru campus since 1994. The results are divided into: a) Field activities - description of the technological species of interest, production chain flows, types of preservative treatments and clump management practices for the development, adaptation and production of different species of culms; b) Lab experiments - physical and mechanical characterization of culms processed as laminated strips and as composite material (glue laminated bamboo – glubam); c) Uses in projects - experiences with natural bamboo and glubam in design, architecture and civil construction projects. In the final remarks, the study aims to demonstrate, through practical and laboratory results, the material's multi-functionality and the feasibility in using bamboo as a sustainable material.

Viabilidade econômica do uso do biogás proveniente da suinocultura em substituição a fontes externas de energia

The swine culture potentially generates waste with high organic load and pollutants, being responsible for the spread of pathogens, contamination of rivers, groundwater and soils, besides it produces foul odors and emit greenhouse gases. However, the high amount of organic matter, which expresses the amount of pollutant load, reflects the energetic potential of these wastes used as raw material in biogas generation through technology of digesters. The properly use of theses digesters provides the production of clean energy and promotes the conservation of the environment. The economic viability of the implantation of an Indian model digester on a small swine farm was verified based on the value from initial investments of deployment, maintenance costs, depreciation, and on the interest and revenues arising from the system. Besides, the amount of biogas produced daily and the average consumption of biogas by the most common used devices such as refrigerator, stove, water heater, and generator of electricity was calculated.. For a backdrop of 10 years, the results of economic indicators NPV of BRL 57,598.95, IRR of 48.38%, Simple Payback of 2.06 years, and Discounted Payback of 2.3 years, demonstrated a favorable outlook for the use of this technology, with the possibility to generate economic, social and environmental benefits.

Vegetables biofortified with iodine: chemical, agronomic and qualitative aspects of raw and fried potatoes

Iodine is an essential microelement for human health because it is a constituent of the thyroid hormones that regulate growth and development of the organism. Iodine Deficiency Disorders (IDDs) are believed to be one of the commonest preventable human health problems in the world today, according to the World Health Organization: that diseases include endemic goiter, cretinism and fetal abnormalities, among others, and they are caused by lack of iodine in the diet, that is the main source of iodine. Since iodine intake from food is not enough respect to human needs, this can be remedied through dietary diversification, mineral supplementation, food fortification, or increasing the concentration and/or bioavailability of mineral elements in the edible portions of crops through agricultural intervention or genetic selection (biofortification). The introduction of iodized salt is a strategy widely used and accepted to eradicate iodine deficiency, because it is an inexpensive source of stable iodine. Since the intake of salt, though iodized, must still be limited according to the risk of cardiovascular disease, so the increase of iodine content in plants for the production of functional foods is representing a field of study of particular interest and a potential market. In Italy potatoes enriched with iodine are produced by a patented procedure of agronomic biofortification for the fresh market since several years, furthermore they are recently accepted and recommended by Italian Thyroid Association, as an alternative source of iodine. Researches performed during the PhD course intended to characterize this innovative vegetables products, focusing the attention on different aspects, such as chemistry, agriculture, and quality of fresh and fried potatoes. For this purpose, lipid fraction of raw material was firstly investigated, in order to assess whether the presence of iodine in plant metabolism can affect fatty acid or sterol biosynthesis, according to the hypothesis that iodine can be bounded to polyunsaturated fatty acids of cell membranes, protecting them from peroxydation; phytosterols of plant sterol are also studied because their importance in reducing serum cholesterol, especially in potato plant sterols are also involved in synthesis of glycoalkaloid, a family of steroidal toxic secondary metabolites present in plants of the Solanaceae family. To achieve this goal chromatographic analytical techniques were employed to identify and quantify fatty acids and sterols profile of common and iodine enriched row potatoes. Another aim of the project was to evaluate the effects of frying on the quality of iodine-enriched and common potatoes. Since iodine-enriched potatoes are nowadays produced only for the fresh market, preliminary trials of cultivation under controlled environment were carried out to verify if potato varieties suitable for processing were able to absorb and accumulate iodine in the tuber. In a successive phase, these varieties were grown in the field, to evaluate their potential productivity and quality at harvest and after storage. The best potato variety to be destined for processing purposes, was finally subjected to repeated frying cycles; the effects of lipid oxidation on the composition and quality of both potatoes and frying oil bath were evaluated by chromatographic and spectrophotometric analytical techniques. Special attention were paid on volatile compounds of fried potatoes.

Wheat and low-input agriculture: agronomic, nutritional and nutraceutical implications

Recently, the increasing interest in organic food products and environmental friendly practices has emphasized the importance of selecting crop varieties suitable for the low-input systems. Additionally, in recent years the relationship between diet and human health has gained much attention among consumers, favoring the investigations on food nutraceutical properties. Among cereals, wheat plays an important role in human nutrition around the world and contributes to the daily intake of essential nutrients such as starch and protein. Moreover, whole grain contains several bioactive compounds that confer to wheat-derived products unique nutraceutical properties (dietary fibre, antioxidants). The present research provided interesting insights for the selection of wheat genotypes suitable for low-input systems and the development of specific breeding programs dedicated to organic farming. The investigation involved 5 old not dwarf genotypes (Andriolo, Frassineto, Gentil rosso, Inallettabile, Verna) and 1 modern dwarf variety (Palesio), grown under biodynamic management, over two consecutive growing seasons (2009/2010, 2010/2011). Results evidenced that under low-input farming some investigated old wheat genotypes (Frassineto, Inallettabile) were comparable to the modern cultivar in terms of whole agronomic performance. As regards the nutritional and nutraceutical properties, some old genotypes (Andriolo, Gentil rosso, Verna) emerged for their relevant content of several investigated phytochemicals (such as insoluble dietary fibre, polyphenols, flavonoids, in vitro antioxidant activity) and nutrients (protein, lipid, minerals). Despite of the low technological features, the six wheat varieties grown under low-input management may efficiently provide raw material for the preparation of traditionally processed bread with valuable sensory and nutritional properties. Results highlighted that old wheat varieties have peculiar phytochemical composition and may be a valuable source of nutraceutical compounds. Some of the genetic material involved in the present study may be used in breeding programs aimed at selecting varieties suitable for low-input farming and rich in health-promoting compounds.

Production of Ethanol from Hardwood

Diminishing crude oil and natural gas supplies, along with concern about greenhouse gas are major driving forces in the search for efficient renewable energy sources. The conversion of lignocellulosic biomass to energy and useful chemicals is a component of the solution. Ethanol is most commonly produced by enzymatic hydrolysis of complex carbohydrates to simple sugars followed by fermentation using yeast. C6Hl0O5 + H2O −Enxymes→ C6H12O6 −Yeast→ 2CH3CH2OH + 2C02 In the U.S. corn is the primary starting raw material for commercial ethanol production. However, there is insufficient corn available to meet the future demand for ethanol as a gasoline additive. Consequently a variety of processes are being developed for producing ethanol from biomass; among which is the NREL process for the production of ethanol from white hardwood. The objective of the thesis reported here was to perform a technical economic analysis of the hardwood to ethanol process. In this analysis a Greenfield plant was compared to co-locating the ethanol plant adjacent to a Kraft pulp mill. The advantage of the latter case is that facilities can be shared jointly for ethanol production and for the production of pulp. Preliminary process designs were performed for three cases; a base case size of 2205 dry tons/day of hardwood (52 million gallons of ethanol per year) as well as the two cases of half and double this size. The thermal efficiency of the NREL process was estimated to be approximately 36%; that is about 36% of the thermal energy in the wood is retained in the product ethanol and by-product electrical energy. The discounted cash flow rate of return on investment and the net present value methods of evaluating process alternatives were used to evaluate the economic feasibility of the NREL process. The minimum acceptable discounted cash flow rate of return after taxes was assumed to be 10%. In all of the process alternatives investigated, the dominant cost factors are the capital recovery charges and the cost of wood. The Greenfield NREL process is not economically viable with the cost of producing ethanol varying from $2.58 to $2.08/gallon for the half capacity and double capacity cases respectively. The co-location cases appear more promising due to reductions in capital costs. The most profitable co-location case resulted in a discounted cash flow rate of return improving from 8.5% for the half capacity case to 20.3% for the double capacity case. Due to economy of scale, the investments become more and more profitable as the size of the plant increases. This concept is limited by the amount of wood that can be delivered to the plant on a sustainable basis as well as the demand for ethanol within a reasonable distance of the plant.

Sewage sludge gasification. Dolomite performance under different operating conditions

Gasification is a technology that can replace traditional management alternatives used up to date to deal with this waste (landfilling, composting and incineration) and which fulfils the social, environmental and legislative requirements. The main products of sewage sludge gasification are permanent gases (useful to generate energy or to be used as raw material in chemical synthesis processes), liquids (tars) and char. One of the main problems to be solved in gasification is tar production. Tars are organic impurities which can condense at relatively high temperatures making impossible to use the produced gases for most applications. This work deals with the effect of some primary tar removal processes (performed inside the gasifier) on sewage sludge gasification products. For this purpose, analysis of the gas composition, tar production, cold gas efficiency and carbon conversion were carried out. The tests were performed with air in a laboratory scale plant consisting mainly of a bubbling bed gasifier. No catalyzed and catalyzed (10% wt of dolomite in the bed and in the feeding) tests were carried out at different temperatures (750ºC, 800ºC and 850ºC) in order to know the effect of these parameters in the gasification products. As far as tars were concerned, qualitative and quantitative tar composition was determined. In all tests the Equivalence Ratio (ER) was kept at 0.3. Temperature is one of the most influential variables in sewage sludge gasification. Higher temperatures favoured hydrogen and CO production while CO2 content decreased, which might be partially explained by the effect of the cracking, Boudouard and CO2 reforming reactions. At 850ºC, cold gas efficiency and carbon conversion reached 49% and 76%, respectively. The presence of dolomite as catalyst increased the production of H2 reaching contents of 15.5% by volume at 850 °C. Similar behaviour was found for CO whereas CO2 and CnHm (light hydrocarbons) production decreased. In the presence of dolomite, a tar reduction of up to 51% was reached in comparison with no catalyzed tests, as well as improvements on cold gas efficiency and carbon conversion. Several assays were developed in order to test catalyst performance under more rough gasification conditions. For this purpose, the throughput value (TR), defined as kg sludge “as received” fed to the gasifier per hour and per m2 of cross sectional area of the gasifier, was modified. Specifically, the TR values used were 110 (reference value), 215 and 322 kg/h·m2. When TR increased, the H2, CO and CH4 production decreased while the CO2 and the CnHm production increased. Tar production increased drastically with TR during no catalysed tests what is related to the lower residence time of the gas inside the reactor. Nevertheless, even at TR=322 kg/h·m2, tar production decreased by nearly 50% with in-bed use of dolomite in comparison with no catalyzed assays under the same operating conditions. Regarding relative tar composition, there was an increase in benzene and naphthalene content when temperature increased while the content of the rest of compounds decreased. The dolomite seemed to be effective all over the range of molecular weight studied showing tar removal efficiencies between 35-55% in most cases. High values of the TR caused a significant increase in tar production but a slight effect on tar composition.

Potencial de producción de biochar en España a partir de residuos de la industria papelera, de lodos de E.D.A.R., de residuos sólidos urbanos y de residuos ganaderos: Estudio de la fijación de carbono

El biochar es un material rico en carbono que se obtiene tras la pirólisis de la biomasa. Este material ha despertado en los últimos años un gran interés en la comunidad científica principalmente por su capacidad para mejorar la productividad de los suelos, influenciando las propiedades fisicoquímicas de los mismos y como medio de fijación de carbono, reduciendo, por tanto, las emisiones de CO2 a la atmósfera. Sin embargo, lo cierto es que hasta la fecha, no existen conclusiones claras o avances definitivos que permitan crear una estandarización para la comercialización del biochar, debido a la variabilidad de sus propiedades (considerando la materia prima de origen y las condiciones de reacción en la pirólisis). En este estudio, partiendo de un análisis exhaustivo de las distintas publicaciones existentes sobre la materia, se trata de dar respuesta a la pregunta sobre cuál sería el verdadero potencial de producción de biochar en España, al tiempo que se trata de cuantificar cuál sería la reducción de las emisiones de CO2 a la atmósfera que conllevaría gestionar los residuos (industria papelera, lodos de EDAR, RSU y residuos ganaderos) a través de la pirólisis. En particular, se ha cuantificado la reducción de las emisiones de CO2 a la atmósfera y se ha evaluado cuánto biochar se debería producir a partir de residuos papeleros, lodos de EDAR o residuos ganaderos para aumentar en un 1% la cantidad de materia orgánica en un suelo y para llevar el contenido en materia orgánica de los suelos agrícolas españoles a un 3,5%. En primer lugar, sobre la cuantificación de la reducción de las emisiones, cabe concluir que, en todos los residuos estudiados, y bajo todas las condiciones de reacción consideradas, la reducción de las emisiones de CO2 a la atmósfera sería realmente notable, oscilando entre un 22,53% y un 96,12 %. En segundo lugar, para aumentar en un 1% el contenido medio en materia orgánica de la superficie agrícola española, sería necesario un aporte de 2,03816*108 t de materia orgánica, que supondría una demanda mínima de biochar de 255.408.361 t en el caso de la aplicación de biochar de estiércol de vacuno a Por otro lado, para llevar la materia orgánica de los suelos agrícolas a un 3,5%, la demanda de biochar variaría entre un mínimo de 158.937 t en el (Comunidad Autónoma con menor necesidad de aporte de materia orgánica) illa la Mancha (Comunidad Autónoma que, por el contrario, necesitaría mayor aporte). ABSTRACT Biochar is a carbon-rich material obtained after a biomass pyrolysis procedure. This material has aroused in recent years a great interest in the scientific community, mainly for its ability to improve the productivity of soils, influencing the physico-chemical properties of soils and as means of carbon storage, reducing emissions of CO2 into the atmosphere). Despite the interest that may raise this matter, the fact is that to date, no clear conclusions or definitive progress have been done to create a standardization for the commercialization of biochar, due to the variability of its properties (considering the raw material and the reaction conditions in the pyrolysis). This study, based on a thorough analysis of the various existing literature on the subject and, leaving other approaches that could have been taken of the interest of the subject in question, attempts to provide answers to the question about what would be the true potential production of biochar in Spain and what would be the reduction of CO2 emissions into the atmosphere, which would entail waste management through pyrolysis. In particular, this study has identified the reduction of CO2 emissions into the atmosphere and has analyzed whether the production of biochar could increase the organic matter content of Spanish agricultural soils. Firstly, regarding the quantification of emissions reductions, by referring to the values contained in the work, it can be concluded that the reduction of CO2 emissions to the atmosphere would be really remarkable, ranging from 22.53% to 96.12%. Secondly, to increase by 1% the average content of organic matter in the spanish agricultural area would require a contribution of 2.03816*108 t of organic matter, which would demand a minimum of 255.408.361 t of cattle manure biochar and a maximum demand of 1.746.494.190 t of deinking sludge pyrolyzed at 500C. On the other hand, to reach a 3.5%, the demand for biochar would vary from a minimum of 158.937 t, in case of cattle manure biochar at C applied to the Canary Islands (Autonomous Community with less need for input of organic matter), and a maximum of 694.695.081 in case of applying deinking sludge biochar at C to Castilla la Mancha (Autonomous Region, which needs the highest contribution).

Gaseificação de vinhaça em água supercrítica.

A gaseificação utiliza o conteúdo intrínseco de carbonos e hidrogênios das matérias primas sólidas ou líquidas na geração de uma mistura de hidrogênio (H2), monóxido de carbono (CO), dióxido de carbono (CO2) e metano (CH4). Tal mistura pode ser utilizada como matéria prima na síntese de novos produtos ou como combustível. A gaseificação pode ser utilizada no processamento de uma gama variada de produtos, independentemente de suas características ou estado físico. A utilização de biomassa como insumo da gaseificação vem sendo cada vez mais explorada e estudada, já que apresenta benefícios não somente na esfera ambiental, mas também em âmbitos econômicos e sociais. A vinhaça é um subproduto do processo de produção de álcool, que contém grandes concentrações de nutrientes e matéria orgânica em sua composição. A sua utilização hoje está limitada a fertirrigação e a aplicações isoladas em biodigestão e outros, que não são suficientes para o consumo da produção anual crescente do resíduo. Seu uso na gaseificação permitiria o aproveitamento do conteúdo orgânico da mesma e a produção de gases de alto valor agregado. Como a umidade do insumo interfere negativamente na eficiência da gaseificação clássica, a aplicação da mesma para matérias primas com alto teor de líquidos não é recomendada. Uma alternativa viável seria a utilização do meio gaseificante supercrítico, que resulta em rendimentos constantes, independentemente da umidade da corrente de entrada do reator. O presente trabalho consiste no projeto de um módulo de gaseificação de vinhaça em água supercrítica, a ser instalado como uma unidade anexa a usinas de açúcar e álcool. Ele compreende o projeto conceitual e análise de viabilidade deste módulo, incluindo estimativas de CAPEX (Capital Expenditure) e OPEX (Operation Expenditure) e uma análise de sensibilidade dos mesmos. O estudo apresenta ainda o estado da arte do conhecimento e da tecnologia de gaseificação com água supercrítica (SCWG), relacionando os gargalos a serem resolvidos, assim como os ganhos intrínsecos da definição conceitual do projeto.

Obtenção de álcool alílico (PROP-2-EN-1-OL) a partir da glicerina derivada do biodiesel de óleo de mamona

In this work, biodiesel was produced from castor oil that was a byproduct glycerin. The molar ratio between oil and alcohol, as well as the use of (KOH) catalyst to provide the chemical reaction is based on literature. The best results were obtained using 1 mol of castor oil (260g) to 3 moles of methyl alcohol (138g), using 1.0% KOH as catalyst at a temperature of 260 ° C and shaken at 120 rpm. The oil used was commercially available, the process involves the reaction of transesterification of a vegetable oil with methyl alcohol. The product of this reaction is an ester, biodiesel being the main product and the glycerin by-product which has undergone treatment for use as raw material for the production of allyl alcohol. The great advantage of the use of glycerin to obtain allyl alcohol is that its use eliminates the large amount of waste of the biodiesel and various forms of insult to the environment. The reactions for the formation of allyl alcohol was conducted from formic acid and glycerin in a ratio 1/1, at a temperature of 260oC in a heater blanket, being sprayed by a spiral condenser for a period of 2 hours and the product obtained contains mostly the allylic alcohol .. The monitoring of reactions was performed by UV-Visible Spectrophotometer: FTIR Fourier transform, the analysis showed that these changes occur spectrometer indicating the formation of the product allylic alcohol (prop-2-en-1-ol) in the presence of water, This alcohol was appointed Alcohol GL. The absorption bands confirms that the reaction was observed in (υ C = C) 1470 -1600 cm -1 and (υ CO), 3610-3670 attributed to C = C groups and OH respectively. The thermal analysis was carried out in a thermogravimetric analyzer SDT Q600, where the mass and temperature are displayed against time, that allows checking the approximate rate of heating. The innovative methodology developed in the laboratory (LABTAM, UFRN), was able to treat the glycerine produced by transesterification of castor oil and used as raw material for production of allyl alcohol, with a yield of 80%, of alcohol, the same is of great importance in the manufacture of polymers, pharmaceuticals, organic compounds, herbicides, pesticides and other chemicals

Synthesis and characterization of prussian blue analogue materials for post-Li ion batteries

Energy issues have always been a subject of concern to people. During the past 30 years, rechargeable Li-ion batteries (LIBs) have been widely used in portable electronic devices and power tools because of their high energy density and efficiency among practical secondary batteries. While the unevenly distribution of Lithium sources and the increasing cost of lithium-raw material can not satisfy the requirement for further cost reduction, especially for the grid-scale energy storage. Post-lithium ion batteries as promising replacement for LIBs have attracted wide attention, owing to their high abundant resources and adequate insertion potential. Similar with Li-ion batteries, finding a suitable electrode material is the key for the research and application of the post-Li ion batteries. In our project, we focus our study on Prussian blue analogues (PBAs), with formula AxM[M’(CN)6]1-y□y•zH2O (0≤x≤2, 0organic framework, with 3D frameworks which allow for a facile insertion/ extraction of ions with negligible lattice strain. By substituting the metal sites with different transition metals, we can get a series of compounds that can be used as both cathode and anode material for both Li-ion and post-Li batteries. The most commonly studied PBAs are metal haxacyanoferrate, with the carbon-sites of -CN- ligands fix connected with Fe. Here, we synthesized three different PBAs: manganese hexacynoferrate (MnHCF), zinc hexacynoferrate (ZnHCF) and titanium hexacynoferrate (TiHCF), using co-precipitation method, and their electrochemical properties were tested in both aqueous Na+, K+, Mg2+, Zn2+ and organic Li+, Na+ electrolytes. Various X-ray techniques were employed to study their electronic and structural properties of electrodes and electrochemical reaction mechanism during cycling.

Characterization and management of particular classes of waste at a regional level. case study: Marche region

There are various methods to analyse waste, which differ from each other according to the level of detail of the compositio. Waste composed by plastic and used for packaging, for example, can be classified by chemical composition of the polymer used for the specific product. At a more basal level, before dividing a waste according to the specific chemical material of which it is composed it is possible and also important to classify it according to the material category. So, if the secondary aim is to consider the particular polymer that constitutes a plastic waste, or what kind of natural polymer composes a specific waste made of wood, the first aim is to classify the product category of the material that makes up the waste, so, if it is wood made, or plastic, or glass made or metal, or organic. There are not specific instruments to make this subdivision, not specific chemical tests, but only a manual recognition of the material that makes up the product or waste. The first steps of this study is a recognition of the materials of which the waste is composed, the second is a the quantification of differentiated and unsorted waste produced in the area under study, the third is a mass balance of the portions of waste sent for recovery in order to obtain information on quantities that can be effectively recovered and ready for new life cycle as raw material; the fourth and last step is an environmental assessment that provides information on the environmental cost of the recovery process. This process scheme is applied to various specific kinds of waste from separate collection generated in a specific area with the aim to find a model analysis appliable to other portions of territory in order to improve knowledge of recovery technologies.