Análise do processo de lixamento tubular da madeira de Corymbia citriodora

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo sobre os efeitos de tensões residuais na vida em fadiga da liga de alumínio 6013-T6, em perfil tubular, submetidas a shot peening

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito dos parâmetros de pulso sobre as características geométricas e desempenho da soldagem com arame tubular autoprotegido e corrente pulsada

Pós-graduação em Engenharia Mecânica - FEB

Avaliação funcional e histológica do enxerto tubular de matriz acelular arterial heteróloga como substituto da uretra em coelhos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da função tubular do prematuro na primeira semana da vida pela relação urinária sódio/creatina

Pós-graduação em Pediatria - FMB

Efeitos da vibração simultânea nas propriedades mecânicas de juntas de aço ASTM A131 soldadas pelo processo arame tubular (FCAW)

Pós-graduação em Engenharia Mecânica - FEG

Bothropoides insularis venom cytotoxicity in renal tubular epithelia cells

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização microestrutural de uma estrutura tubular aeronáutica submetida a sucessivos reparos de solda TIG

This work examines the possible effects of successive repair procedures on the microstructure of welded steel SAE 4130 by TIG welding process. Discussions and results were made about the metallographic analysis , non-metallic inclusions and microhardness tests , which were conducted on samples taken from the cradle engine component after the end of its life , a model airplane T-27 Tucano , made by EMBRAER and belonging were performed FAB . The choice of such component is due to the fact that this is critical to flight safety since it provides support for the aircraft engine . Thus regions of the weld metal , base metal and heat affected , with samples of the original weld bead , free of weld bead and also with four rework procedures for TIG welding zone were analyzed . It was found that after the fourth rework there is an increase in the amount of martensite , which may weaken the material with respect to resistance to fatigue. It was also found that the regions of the heat affected zone and weld metal have higher microhardness values when compared to those found in the base metal due to favoring the formation of ferritic and tempered martensite microstructures . Moreover, a welding process promotes a region with less non-metallic inclusions than metal base , which also explains the difference in the results obtained

Bothropoides pauloensis venom effects on isolated perfused kidney and cultured renal tubular epithelial cells

Coordenadação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudio de las caracteristicas de oclusión de niños de 12 años del municipio de Cáceres, Mato Grosso, Brasil

The aim of this study was to evaluate the occlusal condition of 12 year-old children examined by the Oral Health Brazil 2003 Project in Cáceres city. The sample consisted of 170 children, boys and girls, selected at random among 20 schools that took part in this project. It was used for the analysis of the occlusal condition the Dental Aesthetic Index (DAI), as manual of basic epidemic rising in Oral Health extolled by the World Health Organization which describes the occlusal conditions in relation to dentition, space and occlusion of the permanent dentition. It was observed that the prevalence of the normal occlusion and of the malocclusion were, respectively, 21.18% and 78.82%. This last one was present due to the tooth crowding (74.93%), spacing in the incisor segment (23.88%), diastema (17.17%), anterior maxillary misalignment (58.95%) and anterior mandibular (61.19%), excessive overjet (11.94%), negative overjet (4.47%), open bite (1.5%) and molar relationship Class II or III (26.87%). It was concluded that the studied sample presents a high index of factors to compose the malocclusion.

A influência das variáveis do lixamento tubular na qualidade das peças de Eucalyptus grandis

In 2010, the Brazilian forest sector is represented by about 30,000 companies producing US$ 21 billion annually and account for approximately 5% of the gross domestic product (GDP) in the country. The sanding process is highly demanded in various stages of industrialization of the wood, when there is a need for a better quality surface finishing. The objective of this work was to analyze the influence of cutting speed and sandpaper granulometry on both the surface finishing of pieces of Eucalyptus grandis processed through tubular sanding and on the sanding efforts (force and power of sanding). Four cutting speeds were used (19.5, 22.7, 26 and 28.1 m/s), one advance speed (16 m/min) and three sets of sandpaper (80-100, 80-120 and 100-120) being one for chipping and another for finishing, respectively. A central data acquisition system was set up to capture the variables (cutting power, acoustic emission and vibration) in real time. The cutting force was obtained indirectly, through a frequency inverter. The roughness of the parts was measured by a roughness meter before and after sanding. The highest cutting speed used (28.1 m/s) consumed more power and generated more acoustic emission among the four speeds tested. Regarding the vibration, the lower cutting speed (19.5 m/ s) generated the highest vibration in the sander machine. It is concluded that the range of 100-120 sandpapers resulted in values of average roughness (Ra) lower than the other sets of sandpaper used, as it resulted in better surface finishing.

Avaliação técnica e econômica de um biodigestor de fluxo tubular: estudo de caso do modelo implantado na etec "orlando quagliato" em Santa Cruz do Rio Pardo, SP

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Kinetic and thermodynamic investigation of Arthrospira (Spirulina) platensis fed-batch cultivation in a tubular photobioreactor using urea as nitrogen source

BACKGROUND: Fed-batch culture allows the cultivation of Arthrospira platensis using urea as nitrogen source. Tubular photobioreactors substantially increase cell growth, but the successful use of this cheap nitrogen source requires a knowledge of the kinetic and thermodynamic parameters of the process. This work aims at identifying the effect of two independent variables, temperature (T) and urea daily molar flow-rate (U), on cell growth, biomass composition and thermodynamic parameters involved in this photosynthetic cultivation. RESULTS: The optimal values obtained were T = 32 degrees C and U = 1.16 mmol L-1 d-1, under which the maximum cell concentration was 4186 +/- 39 mg L-1, cell productivity 541 +/- 5 mg L-1 d-1 and yield of biomass on nitrogen 14.3 +/- 0.1 mg mg-1. Applying an Arrhenius-type approach, the thermodynamic parameters of growth (?H* = 98.2 kJ mol-1; ?S* = - 0.020 kJ mol-1 K-1; ?G* = 104.1 kJ mol-1) and its thermal inactivation (Delta H-D(0) =168.9 kJ mol-1; Delta S-D(0) = 0.459 kJ mol-1 K-1; Delta G(D)(0) =31.98 kJ mol-1) were estimated. CONCLUSIONS: To maximize cell growth T and U were simultaneously optimized. Biomass lipid content was not influenced by the experimental conditions, while protein content was dependent on both independent variables. Using urea as nitrogen source prevented the inhibitory effect already observed with ammonium salts. Copyright (c) 2012 Society of Chemical Industry

Arthrospira (Spirulina) platensis cultivation in tubular photobioreactor: Use of no-cost CO2 from ethanol fermentation

The present study aimed at evaluating the production of Arthrospira platensis in tubular photobioreactor using CO2 from ethanol fermentation. The results of these cultivations were compared to those obtained using CO2 from cylinder at different protocols of simultaneous ammonium sulfate and sodium nitrate feeding. Maximum cell concentration (X-m), cell productivity (P-x), nitrogen-to-cell conversion factor (Y-X/N), and biomass composition (total lipids and proteins) were selected as responses and evaluated by analysis of variance. The source of CO2 did not exert any significant statistical influence on these responses, which means that the flue gas from ethanol fermentation could successfully be used as a carbon source as well as to control the medium pH, thus contributing to reduce the greenhouse effect. The results taken as a whole demonstrated that the best combination of responses mean values (X-m = 4.543 g L-1; P-x = 0.460 g L-1 d(-1); Y-X/N = 15.6 g g(-1); total lipids = 8.39%; total proteins = 18.7%) was obtained using as nitrogen source a mixture of 25% NaNO3 and 75% (NH4)(2)SO4, both expressed as nitrogen. (C) 2011 Elsevier Ltd. All rights reserved.

High Cholesterol Feeding May Induce Tubular Dysfunction Resulting in Hypomagnesemia

Background/Aims: Hypomagnesemia may induce hypercholesterolemia, but the contrary has not been described yet. Thus, magnesium homeostasis was evaluated in rats fed a cholesterol-enriched diet for 8 days. This study has a relevant clinical application if hypomagnesemia, due to hypercholesterolemia, is confirmed in patients with long-term hypercholesterolemia. Methods: Both hypercholesterolemic (HC) and normocholesterolemic rats (NC) were divided into sets of experiments to measure hemodynamic parameters, physiological data, maximum capacity to dilute urine (C-H2O), variations (Delta) in [Ca2+](i) and the expression of transporter proteins. Results: HC developed hypomagnesemia and showed high magnesuria in the absence of hemodynamic abnormalities. However, the urinary sodium excretion and C-H2O in HC was similar to NC. On the other hand, the responses to angiotensin II by measuring Delta [Ca2+](i) were higher in the thick ascending limb of Henle's loop (TAL) of HC than NC. Moreover, high expression of the cotransporter NKCC2 was found in renal outer medulla fractions of HC. Taken together, the hypothesis of impairment in TAL was excluded. Actually, the expression of the epithelial Mg2+ channel in renal cortical membrane fractions was reduced in HC. Conclusion: Impairment in distal convoluted tubule induced by hypercholesterolemia explains high magnesuria and hypomagnesemia observed in HC. Copyright (C) 2011 S. Karger AG, Basel