Aircraft Engines Maintenance Costs and Reliability: An Appraisal of the Decision Process to Remove an Engine for a Shop Visit Aiming at Minimum Maintenance Unit Cost

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Estatística e Gestão de Informação.

Gestão de infra-estruturas e avaliação de equipamentos laboratoriais

RESUMO: A confiabilidade e qualidade dos resultados clínicos de um laboratório, estão dependentes da qualidade do equipamento onde estes são processados. A qualidade de um equipamento consiste em apresentar resultados com uma confiabilidade metrológica de acordo com os processos de medição realizados. Desta forma, os equipamentos de medição devem conter características metrológicas de acordo com os requisitos dos processos que estão inseridos, tais como: erro máximo, incerteza, resolução… Todos os equipamentos por muito bons que sejam, apresentam perdas das suas características metrológicas ao longo do tempo, o que se torna importante a determinação periódica das suas calibrações, manutenções e o seu respectivo ajuste. A periodicidade das calibrações, devem ser baseadas, em critérios bem estabelecidos de modo a evitar a ocorrência da não conformidade, devido às medições com os equipamentos fora das suas especificações, garantindo-se assim, a confiabilidade metrológica e o aumento da produtividade devido ao controlo dos processos, evitando-se desta forma qualquer tipo de avaria por parte destes. Os normativos de Qualidade e Certificação estabelecem como requisito a calibração dos equipamentos de medição em intervalos adequados, mas não definem claramente qual o intervalo adequado. O importante é gerir as etapas de calibração e manutenção de acordo com os equipamentos de modo a garantir que os resultados emitidos por estes sejam mantidos em condições confiáveis, dentro do período entre calibrações e manutenções, de modo a que nãoocorra uma condição de falha, e por conseguinte, medições com grande quantidade de erros.------------ ABSTRACT: The reliability and quality of the results of a clinical laboratory, are dependent on the quality of the equipment where they are processed. The quality of a product is to present results with a metrological reliability according to the measuring processes carried out. Thus, measuring equipment must contain metrological characteristics according to the requirements of the processes that are included, such as: maximum error, uncertainty, resolution ... All equipment for very good they are, show losses of its metrological characteristics over time, it becomes important to determine its periodic calibrations, maintenance and its adjustment. The frequency of calibrations should be based on well-established criteria in order to avoid the occurrence of non-compliance due to the measurements with the equipment beyond its specifications, thus ensuring the metrological reliability and increased productivity due to the control of processes, thus avoiding any kind of damage on the part thereof. The normative and Quality Certification as a requirement to establish calibration of measuring equipment at appropriate intervals, but not clearly stipulate the proper range. It is important to manage the steps of calibration and maintenance equipment according to ensure that the results emitted by these conditions are maintained in trusted within the period between calibrations and maintenance, sothat there occurs a fault condition, and therefore, large amount of measurements with errors.

Implementação, documentação e avaliação da aplicação de Lean Maintenance no Sistema de Armas Epsilon

Dissertação para obtenção do Grau de Mestre em Engenharia Mecânica

In vitro maintenance of Angiostrongylus costaricensis does not provide physiological conditions for egg laying

Fifteen pairs (male/female) of Angiostrongylus costaricensis were kept in vitro in Waymouth medium for three days to evaluate the amount and duration of egg laying. At 24, 48 and 72 hours, the mean egg counts were 321, 24 and 4 eggs/10 microliters, respectively. Most of the eggs were eliminated within the first 24 hours, suggesting they are expelled under non-physiological conditions. These results indicate that in vitro conditions are not appropriate for drug trials of egg-laying inhibitors for treatment of abdominal angiostrongylosis.

Basic sanitation, socioeconomic conditions, and degree of risk for the presence and maintenance of malaria in a low-transmission area in the Brazilian Amazon

ABSTRACTINTRODUCTION:This study aimed to evaluate basic sanitation and socioeconomic indicators, reported cases of malaria, and risk of contracting malaria in the Ananindeua municipality, State of Pará.METHODS:Data on basic sanitation and socioeconomic dimensions were taken from the Brazilian Institute of Geography and Statistics [ Instituto Brasileiro de Geografia e Estatística (IBGE)] 2010 census. Epidemiological malaria information was taken from the Epidemiological Malaria Surveillance Information System [ Sistema de Informação de Vigilância Epidemiológica de Malária (SIVEP/Malaria)], between 2003 and 2013 of the Ministry of Health and from the SIVEP/Malaria forms of the municipality's Endemic Diseases Unit for 2,013 cases.RESULTS:Our data do not confirm the correlation among indicators of basic sanitation, socioeconomic conditions, and water supply with malaria cases. Of the 1,557 cases evaluated, most were caused by Plasmodium vivax , with rare cases of Plasmodium falciparum and mixed infections. There were 756 notifications in 2003. The number of reported cases was sharply reduced between 2006 and 2012, but a 142-case outbreak occurred in 2013. Ananindeua municipality's Annual Parasite Index indicated low risk in 2003 and no risk in other years, and the 2,013 cases were predominantly male individuals aged ≥40 years.CONCLUSIONS:Our data confirm the non-endemicity of malaria in the Ananindeua municipality, as the Annual Parasite Indices described for the years 2004-2013 classify it as a risk-free area. However, the 2013 outbreak indicates the need to strengthen prevention, surveillance, and control activities to reduce the risk of new outbreaks and consequent economic and social impacts on the population.

Development of autonomous maintenance in a furniture company

This article presents a work performed in the maintenance department of a furniture company in Portugal, in order to develop and implement autonomous maintenance. The main objective of the project was related to the objective to increase and make effective the autonomous maintenance tasks performed by production operators, and in this way avoiding unplanned downtime due to equipment failures. Although some autonomous maintenance tasks were already carried out within the company, a preliminary study revealed weaknesses in the application of this tool. In the initial phase of this pilot project, the main problems encountered at the level of autonomous maintenance were related to the lack of time to carry out these tasks, showing that the stipulated procedures were far from the real needs of the company. To solve these problems a pilot project was conducted, making several changes in the performance of autonomous maintenance tasks, making them standard and adapted to reality of each production line. There was a general improvement in the factory indicators, and essentially there was a behavioral change, since the operators felt that their opinions were taking into account and began to understand the importance of small tasks performed by them.

Fuzzy maintenance costs of a wind turbine pitch control device

This paper deals with the problem of estimation maintenance costs for the case of the pitch controls system of wind farms turbines. Previous investigations have estimated these costs as (traditional) “crisp” values, simply ignoring the uncertainty nature of data and information available. This paper purposes an extended version of the estimation model by making use of the Fuzzy Set Theory. The results alert decision-makers to consequent uncertainty of the estimations along with their overall level, thus improving the information given to the mainte-nance support system.

Effect of oscillatory breathing on the variability of the RR Intervals and its prognostic importance in individuals with left ventricular global systolic dysfunction

OBJECTIVE: To assess the effect of the oscillatory breathing on the variability of RR intervals (VRR) and on prognostic significance after one year follow-up in subjects with left ventricular global systolic dysfunction. METHODS: We studied 76 subjects, whose age ranged from 40 to 80 years, paired for age and gender, divided into two groups: group I - 34 healthy subjects; group II - 42 subjects with left ventricular global systolic dysfunction (ejection fraction < 0.40). The ECG signals were acquired during 600s in supine position, and analyzed the variation of the thoracic amplitude and the VRR. Clinical and V-RR variables were applied into a logistic multivariate model to foretell survival after one year follow-up. RESULTS: Oscillatory breathing was detected in 35.7% of subjects in vigil state of group II, with a concentration of the spectral power in the very low frequency band, and was independent of the presence of diabetes, functional class, ejection fraction, cause of ventricular dysfunction and survival after one year follow-up. In the logistic regression model, ejection fraction was the only independent variable to predict survival. CONCLUSION: 1) Oscillatory breathing pattern is frequent during wakefulness in the left ventricular global systolic dysfunction and concentrates spectral power in the very low band of V-RR; 2) it does not relate to severity and cause of left ventricular dysfunction; 3) ejection fraction is the only independent predictive variable for survival in this group of subjects.

maintenance model for systems with phase-type distributed times to failure

Magdeburg, Univ., Fak. für Mathematik, Diss., 2010

Assessing the role of Piccolo and Bassoon zinc finger domains on synapse vesicle recycling and maintenance

Magdeburg, Univ., Fak. für Naturwiss., Diss., 2013

Maintenance of rattlesnakes in captivity / by James B. Murphy and Barry L. Armstrong.

no.3 (1978)

La incidència de l’afinació en el reconeixement auditiu dels intervals harmònics: una experiència a l’inici dels estudis musicals especialitzats de grau mitjà.

L’article presenta una investigació sobre la incidència de l’afinació vocal en el reconeixement auditiu dels intervals harmònics. La recerca s’ha realitzat durant el curs acadèmic 2006-07 en el context del Conservatori Professional de Música de Girona, concretant-se la mostra d’estudi en els alumnes de primer curs de grau mitjà. S’hi exposen en primer lloc les línies bàsiques del concepte d’educació de l’oïda musical, que seguidament s’especifiquen en l’afinació i el reconeixement auditiu dels intervals musicals. Posteriorment es relata el procediment metodològic que s’ha dut a terme en aquest estudi de cas, detallant-se els resultats musicals obtinguts a través de la realització d’un test de nivell de reconeixement auditiu harmònic. Aquest test s’ha efectuat prèviament i posterior a un breu treball d’intervenció vocal. L’estratègia de recerca es completa mitjançant unes enquestes adreçades als alumnes i als seus corresponents professors especialitzats en Llenguatge Musical. Les conclusions de la investigació ens permeten confirmar que l’afinació vocal ha incidit positivament en el reconeixement auditiu dels intervals harmònics.

Catalan's intervals and realizers of triangulations

The Stanley lattice, Tamari lattice and Kreweras lattice are three remarkable orders defined on the set of Catalan objects of a given size. These lattices are ordered by inclusion: the Stanley lattice is an extension of the Tamari lattice which is an extension of the Kreweras lattice. The Stanley order can be defined on the set of Dyck paths of size n as the relation of being above. Hence, intervals in the Stanley lattice are pairs of non-crossing Dyck paths. In a former article, the second author defined a bijection Φ between pairs of non-crossing Dyck paths and the realizers of triangulations (or Schnyder woods). We give a simpler description of the bijection Φ. Then, we study the restriction of Φ to Tamari’s and Kreweras’ intervals. We prove that Φ induces a bijection between Tamari intervals and minimal realizers. This gives a bijection between Tamari intervals and triangulations. We also prove that Φ induces a bijection between Kreweras intervals and the (unique) realizers of stack triangulations. Thus, Φ induces a bijection between Kreweras intervals and stacktriangulations which are known to be in bijection with ternary trees.