Characterization of micro-bubble size distribution and flow configuration in DAF contact zone by a non-intrusive image analysis system and tracer tests

This paper aims to investigate the influence of some dissolved air flotation (DAF) process variables (specifically: the hydraulic detention time in the contact zone and the supplied dissolved air concentration) and the pH values, as pretreatment chemical variables, on the micro-bubble size distribution (BSD) in a DAF contact zone. This work was carried out in a pilot plant where bubbles were measured by an appropriate non-intrusive image acquisition system. The results show that the obtained diameter ranges were in agreement with values reported in the literature (10-100mm), quite independently of the investigated conditions. The linear average diameter varied from 20 to 30mm, or equivalently, the Sauter (d(3,2)) diameter varied from 40 to 50mm. In all investigated conditions, D(50) was between 75% and 95%. The BSD might present different profile (with a bimodal curve trend), however, when analyzing the volumetric frequency distribution (in some cases with the appearance of peaks in diameters ranging from 90-100mm). Regarding volumetric frequency analysis, all the investigated parameters can modify the BSD in DAF contact zone after the release point, thus potentially causing changes in DAF kinetics. This finding prompts further research in order to verify the effect of these BSD changes on solid particle removal efficiency by DAF.

Mock circulatory system for the evaluation of left ventricular assist devices, endoluminal prostheses, and vascular diseases

A new digital computer mock circulatory system has been developed in order to replicate the physiologic and pathophysiologic characteristics of the human cardiovascular system. The computer performs the acquisition of pressure, flow, and temperature in an open loop system. A computer program has been developed in Labview programing environment to evaluate all these physical parameters. The acquisition system was composed of pressure, flow, and temperature sensors and also signal conditioning modules. In this study, some results of flow, cardiac frequencies, pressures, and temperature were evaluated according to physiologic ventricular states. The results were compared with literature data. In further works, performance investigations will be conducted on a ventricular assist device and endoprosthesis. Also, this device should allow for evaluation of several kinds of vascular diseases.

Expert system application on preliminary design of water retaining structures

Design of liquid retaining structures involves many decisions to be made by the designer based on rules of thumb, heuristics, judgment, code of practice and previous experience. Various design parameters to be chosen include configuration, material, loading, etc. A novice engineer may face many difficulties in the design process. Recent developments in artificial intelligence and emerging field of knowledge-based system (KBS) have made widespread applications in different fields. However, no attempt has been made to apply this intelligent system to the design of liquid retaining structures. The objective of this study is, thus, to develop a KBS that has the ability to assist engineers in the preliminary design of liquid retaining structures. Moreover, it can provide expert advice to the user in selection of design criteria, design parameters and optimum configuration based on minimum cost. The development of a prototype KBS for the design of liquid retaining structures (LIQUID), using blackboard architecture with hybrid knowledge representation techniques including production rule system and object-oriented approach, is presented in this paper. An expert system shell, Visual Rule Studio, is employed to facilitate the development of this prototype system. (C) 2002 Elsevier Science Ltd. All rights reserved.

Modalidades síncronas e assíncronas no ensino da radiologia do sistema nervoso: estilos e resultados de aprendizagem

Lidar com as problemáticas da saúde, implica um domínio dos processos cognitivos (raciocínio, resolução de problemas e tomada de decisão) e de desempenhos práticos, o que obriga a afectação de um conjunto de atitudes e comportamentos específicos. Este estudo, implementou e avaliou o impacto de experiências pedagógicas desenvolvidas com os estudantes da unidade curricular Radiologia do Sistema Nervoso (RSN) da Escola Superior de Tecnologia da Saúde de Lisboa (ESTeSL). Aplicaram-se metodologias de ensino mistas (presenciais e virtuais) utilizadas na leccionação teórica e prática no ano curricular 2008/2009. Para a avaliação do perfil de aprendizagem dos estudantes foi aplicado o método de Honey & Munford e para a avaliação e monitorização dos conhecimentos aplicaram-se check list baseadas nos conteúdos programáticos. A monitorização das ferramentas da plataforma moodle complementaram a restante informação. Verificou-se uma progressão de aprendizagem positiva para um grupo de estudantes maioritariamente do estilo reflexivo (média=10,6 estudantes). As conclusões apontaram para um impacto positivo quanto à aplicação das metodologias híbridas com maior índice de sucesso para a metodologia assíncrona. Verificou-se também mais flexibilidade no acesso aos conteúdos porém com algumas limitações tais como residência inicial por parte dos estudantes, maior carga de trabalho para os docentes, falta de terminais para acesso à plataforma e pouca experiência de todos os envolvidos no domínio e manipulação da plataforma. ABSTRACT - This study focused on the role of cognitive processes (reasoning, problem solving and decision making) and performance practice in the formation of attitudes and behaviours relating to health issues. It was conducted to evaluate the effects of pedagogical experiences on students who participated in the course in radiography in the Nervous System Imaging Unit (RSN) of the Lisbon Health School of Technology. Mixed (face-to-face and virtual) teaching methodologies were used in theory and practice sessions. Honey and Munford’s method was used to evaluate the learning profile of students. To monitor and evaluate students’ knowledge acquisition, check lists based on program topics were applied. Other information was supplied through the learning platform of Moodle. The student group with mostly a reflective learning style increased their knowledge. The asynchronous method was shown to produce a higher success rate and more flexibility in accessing content but also registered some limitations such as resistance by students, increased workload for teachers, lack of access to the platform and inexperience of all involved in handling the platform.

TINSEL – a web-based intelligent tutoring system on electrical installation design

This paper presents a project consisting on the development of an Intelligent Tutoring System, for training and support concerning the development of electrical installation projects to be used by electrical engineers, technicians and students. One of the major goals of this project is to devise a teaching model based on Intelligent Tutoring techniques, considering not only academic knowledge but also other types of more empirical knowledge, able to achieve successfully the training of electrical installation design.

Intelligent management of end consumers loads including electric vehicles through a SCADA system

The large penetration of intermittent resources, such as solar and wind generation, involves the use of storage systems in order to improve power system operation. Electric Vehicles (EVs) with gridable capability (V2G) can operate as a means for storing energy. This paper proposes an algorithm to be included in a SCADA (Supervisory Control and Data Acquisition) system, which performs an intelligent management of three types of consumers: domestic, commercial and industrial, that includes the joint management of loads and the charge/discharge of EVs batteries. The proposed methodology has been implemented in a SCADA system developed by the authors of this paper – the SCADA House Intelligent Management (SHIM). Any event in the system, such as a Demand Response (DR) event, triggers the use of an optimization algorithm that performs the optimal energy resources scheduling (including loads and EVs), taking into account the priorities of each load defined by the installation users. A case study considering a specific consumer with several loads and EVs is presented in this paper.

Combined heat and power and consumption optimization in a SCADA-based system

The operation of power systems in a Smart Grid (SG) context brings new opportunities to consumers as active players, in order to fully reach the SG advantages. In this context, concepts as smart homes or smart buildings are promising approaches to perform the optimization of the consumption, while reducing the electricity costs. This paper proposes an intelligent methodology to support the consumption optimization of an industrial consumer, which has a Combined Heat and Power (CHP) facility. A SCADA (Supervisory Control and Data Acquisition) system developed by the authors is used to support the implementation of the proposed methodology. An optimization algorithm implemented in the system in order to perform the determination of the optimal consumption and CHP levels in each instant, according to the Demand Response (DR) opportunities. The paper includes a case study with several scenarios of consumption and heat demand in the context of a DR event which specifies a maximum demand level for the consumer.

Sistema pericial para o estudo de composição de betões

O betão é o material de construção feito pelo Homem mais utilizado no mundo. A sua composição é um processo complexo que exige um conhecimento teórico sólido e muita experiência prática, pelo que poucas pessoas estão habilitadas para o fazer e são muito requisitadas. No entanto não existe muita oferta actual de software que contemple alguns dos aspectos importantes da composição do betão, nomeadamente para o contexto europeu. Nesse sentido, foi desenvolvido um sistema de apoio à decisão chamado Betacomp, baseado num sistema pericial, para realizar estudos de composição de betão. Este contempla as normas legais portuguesas e europeias, e a partir da especificação do betão apresenta toda a informação necessária para se produzir um ensaio de betão. A aquisição do conhecimento necessário ao sistema contou com a colaboração de um especialista com longa e comprovada experiência na área da formulação e produção do betão, tendo sido construída uma base de conhecimento baseada em regras de produção no formato drl (Drools Rule Language). O desenvolvimento foi realizado na plataforma Drools.net, em C# e VB.net. O Betacomp suporta os tipos de betão mais comuns, assim como adições e adjuvantes, sendo aplicável numa grande parte dos cenários de obra. Tem a funcionalidade de fornecer explicações sobre as suas decisões ao utilizador, auxiliando a perceber as conclusões atingidas e simultaneamente pode funcionar como uma ferramenta pedagógica. A sua abordagem é bastante pragmática e de certo modo inovadora, tendo em conta parâmetros novos, que habitualmente não são considerados neste tipo de software. Um deles é o nível do controlo de qualidade do produtor de betão, sendo feito um ajuste de compensação à resistência do betão a cumprir, proporcional à qualidade do produtor. No caso dos produtores de betão, permite que indiquem os constituintes que já possuem para os poderem aproveitar (caso não haja impedimentos técnicos) , uma prática muito comum e que permitirá eventualmente uma aceitação maior da aplicação, dado que reflecte a forma habitual de agir nos produtores.

Aparato para experimentação remota do lançamento de projéteis

Num sistema de ensino cada vez mais exigente, a experimentação assume um papel fundamental na aquisição e validação do conhecimento. No ensino da Física, a necessidade de compreender a influência do meio num dado conceito teórico leva a que a experimentação tenha um carácter obrigatório. Neste contexto, surgem três cenários capazes de suportar a aprendizagem dos conceitos teóricos adquiridos. A simulação que faz uso da velocidade e capacidades de cálculo do computador para obter o resultado de uma experiência, a experimentação tradicional em laboratório, na qual o aluno executa, presencialmente, a sua experiência e por último a experimentação remota, que permite a execução de uma experiência real sem a presença física do aluno. Esta dissertação apresenta o projeto de um aparato para experimentação remota do “Lançamento de projéteis”. De forma a providenciar um meio de ensino de Física mais flexível, o aparato desenvolvido permite, aos alunos, a determinação da aceleração da gravidade e o estudo da dependência do movimento de um projétil num conjunto de parâmetros. Este aparato, operado remotamente, é acedido via web, onde primeiramente é reservado um intervalo de tempo. O conjunto de parâmetros (“Bola”, “Altura de lançamento” e “Ângulo de lançamento”) da máquina permite suportar vários cenários de ensino da Física, com diferentes complexidades.

Knowledge management in multinational companies: the repatriates’ role in the competitive advantage in subsidiaries

This paper addresses the topic of knowledge management in multinational companies (MNCs). Its purpose is to examine the role of expatriates in knowledge acquisition and transfer within MNCs. Specifically it focuses on knowledge acquisition and transfer from one MNC head office located in Germany to two Portuguese subsidiaries as a basis for competitive advantage in their Portuguese subsidiaries. A qualitative research methodology is used, specifically through an exploratory case study approach, which examines how international assignments are important for the role of expatriates In knowledge acquisition and transfer between foreign head offices and their Portuguese subsidiaries. The data were collected through semi structured interviews to 10 Portuguese repatriates from two Portuguese subsidiaries of one foreign MNC. The findings suggest that the reasons that lead to expatriating employees from Portuguese subsidiaries to foreign head offices are connected to (1) knowledge management strategies to development the subsidiary’s performance; (2) new skills and knowledge acquisition by future team leaders and business/product managers in Portuguese subsidiaries; (3) procuring knowledge, from agents in head office, to be disseminated amongst co-workers in Portuguese subsidiaries; (4) acquiring global management skills, impossible to acquire locally and; (5) developing global projects within MNC. Also our results show that knowledge acquisition and transfer from foreign head office, through subsidiaries’ expatriates, contributes directly to the Portuguese subsidiaries’ innovation, improved performance, competitive advantage and growth in the economic sectors in which they operate. Moreover, evidence reveals that expatriation is seen as a strategy to fulfil some of the main organisational objectives through their expatriates (e.g., create new products and business markets, develop and incorporate new organisational techniques and processes, integrate global teams within multinational corporation with a responsibility on the definition of global objectives). The results obtained suggest that expatriates have a central role in acquiring and transferring strategic knowledge from MNC head office to their subsidiaries located in Portugal. Based on the findings, the paper discusses in detail the main theoretical and managerial implications. Suggestions for further research are also presented. The study’s main limitation is the small size of the sample, but its findings and methodology are quite original and significant.

Virtual Communities of Practice: Design and Development of Support Platforms and Participation Fostering

Mestrado em Engenharia Informática - Área de Especialização em Sistemas Gráficos e Multimédia

A knowledge-based framework to facilitate E-training implementation

Dissertação para obtenção do Grau de Mestre em Engenharia Eletrotécnica e de Computadores

Sistema de predição de avarias em máquinas de unidades fabris globalmente dispersas

Tese de Doutoramento Ramo Engenharia Industrial e de Sistemas

Desenvolvimento de rede neuronal artificial para o diagnóstico de doenças neurodegenerativas

Dissertação de mestrado integrado em Engenharia Eletrónica Industrial e Computadores

Diseño del subsistema RF para el receptor SAR biestático en banda-C SABRINA

Este proyecto tiene como objetivo diseñar un nuevo receptor SAR biestático para el sistema SABRINA (SAR Bistatic fixed Receiver for INterferometric Applications) caracterizando el sistema que ya existía. El nuevo dispositivo deberá cumplir con las características y requisitos del escenario teniendo en cuenta la potencia recibida y el ruido de cuantificación de la tarjeta digitalizadora. Con este fin se introducen previamente conocimientos de teoría RADAR y SAR. Además, se deberá compactar al máximo el sistema para conseguir un receptor autocontenido que facilite su traslado. Para tal fin se ha incorporado a la caja del receptor un sintetizador programable que actúa de oscilador local de las cadenas de recepción y una fuente de alimentación que provee la tensión a todos los componentes activos del dispositivo. Por otra parte el proyecto ilustra las diferentes campañas de experimentos que se han realizado durante el periodo de trabajo.