Water use and wastewater discharge of industrial sector in China

Problem of water scarcity has been increasingly severe in China. Though industrial sectors play important role for the rapid economic growth, and they consumes water and discharge wastewater. The purpose of this study is to examine the efficiency of water use and wastewater discharge in comparison with those of other inputs and production output in Chinese industry. Measuring efficiency of each input and output factor from 2002 to 2008, we find the average inefficiencies of industrial water use and industrial wastewater discharge are higher than those of capital, labor, and production output in China. In addition, the productivity levels to save water in the water shortage areas are not higher compared to the others. The water use inefficiency has a high dispersion especially in the regions where the amounts of water resources per capita is less than 3000 cubic meter.

A novel experimental method to assess industrial aerosol deposition in idealized porous channels

A novel and economical experimental technique has been developed to assess industrial aerosol deposition in various idealized porous channel configurations. This judicious examination on aerosol penetration in porous channels will assist engineers to better optimize designs for various engineering applications. Deposition patterns differ with porosity due to geometric configurations of the channel and superficial inlet velocities. Interestingly, it is found that two configurations of similar porosity exhibit significantly higher deposition fractions. Inertial impaction is profound at the leading edge of all obstacles, whereas particle build-up is observed at the trailing edge of the obstructions. A qualitative analysis shows that the numerical results are in good agreement with experimental results.

Post-industrial Intervention : An Activity-Theoretical Expedition Tracing the Proximal Development of Forms of Conducting Interventions

Ei saatavilla

Near infrared spectroscopy as a rapid non-invasive tool for agricultural and industrial process management with special reference to avocado and sandalwood industries

Near infrared spectroscopy (NIRS) can play a vital role as a cost effective, rapid, non-invasive, reproducible diagnostic tool for many environmental management, agricultural and industrial waste water monitoring applications. In this paper we highlight the ability of NIRS technology to be used as a diagnostic tool in agricultural and environmental applications through the successful assessment of Fourier Transform NIRS to predict α santalol in sandalwood chip samples, and maturity of ‘Hass’ avocado fruit based on dry matter content. Presented at the Third International Conference on Challenges in Environmental Science & Engineering, CESE-2010. 26 September – 1 October 2010, The Sebel, Cairns, Queensland, Australia.

Econometric models of Finnish non-industrial private forest owners' timber supply and timber stock

This dissertation examines the short- and long-run impacts of timber prices and other factors affecting NIPF owners' timber harvesting and timber stocking decisions. The utility-based Faustmann model provides testable hypotheses of the exogenous variables retained in the timber supply analysis. The timber stock function, derived from a two-period biomass harvesting model, is estimated using a two-step GMM estimator based on balanced panel data from 1983 to 1991. Timber supply functions are estimated using a Tobit model adjusted for heteroscedasticity and nonnormality of errors based on panel data from 1994 to 1998. Results show that if specification analysis of the Tobit model is ignored, inconsistency and biasedness can have a marked effect on parameter estimates. The empirical results show that owner's age is the single most important factor determining timber stock; timber price is the single most important factor in harvesting decision. The results of the timber supply estimations can be interpreted using utility-based Faustmann model of a forest owner who values a growing timber in situ.

Industrial Removal Office records undated, 1899-1922

Contains Board of Directors minutes (1903, 1907), Executive Committee minutes (1907), Removal Committee minutes (1903-1917), Annual Reports (1910, 1913), Monthly Reports (1901-1919), Monthly Bulletins (1914-1915), studies of those removed, Bressler's "The Removal Work, Including Galveston," and several papers relating to the IRO and immigration. Financial papers include a budget (1914), comparative per capita cost figures (1909-1922), audits (1915-1918), receipts and expenditures (1918-1922), investment records, bank balances (1907-1922), removal work cash book (1904-1911), office expenses cash account (1903-1906), and the financial records of other agencies working with the IRO (1906). Includes also removal case records of first the Jewish Agricultural Society (1899-1900), and then of the IRO (1901-1922) when it took over its work, family reunion case records (1901-1904), and the follow-up records of persons removed to various cities (1903-1914). Contains also the correspondence of traveling agents' contacts throughout the U.S. from 1905-1914, among them Stanley Bero, Henry P. Goldstein, Philip Seman, and Morris D. Waldman.

The ghost in the city industrial complex: Le Corbusier and the fascist theory of Urbanisme

Le Corbusier participated in an urban dialogue with the first group in France to call itself fascist: the journalist Georges Valois’s militant Faisceau des Combattants et Producteurs (1925-1927), the “Blue Shirts,” inspired by the Italian “Fasci” of Mussolini. Le Corbusier’s portrait photograph materialised on the front cover of the January 1927 issue of the Faisceau League’s newspaper Le Nouveau Siècle edited by the former anarcho-syndicalist journalist Georges Valois, its leader, who fashioned himself as the French Mussolini. Le Corbusier was described in the Revue as one of les animateurs (the “organisers”) of the Party1 – meaning a member of the technical elite who would drive the Faisceau’s plans. On 1 May 1927, the Nouveau Siècle printed a full-page feature “Le Plan Voisin” on Le Corbusier’s 1922 redesign of Paris : the architect’s single-point perspective sketch appeared below an extract lifted from the architect’s original polemic Le Centre de Paris on the pages of Le Corbusier’s second book Urbanisme published two years earlier, a treatise on urbanism.2 Three weeks later, Le Corbusier presented a slide show of his urban plans at a fascist rally for the inauguration of the Faisceau’s new headquarters on the rue du faubourg Poissonniere, thereby crystalising the architect’s hallowed status in the league...

Ultrastructure of Biofilms Formed by Bacteria from Industrial Processes

Microorganisms exist predominantly as sessile multispecies communities in natural habitats. Most bacterial species can form these matrix-enclosed microbial communities called biofilms. Biofilms occur in a wide range of environments, on every surface with sufficient moisture and nutrients, also on surfaces in industrial settings and engineered water systems. This unwanted biofilm formation on equipment surfaces is called biofouling. Biofouling can significantly decrease equipment performance and lifetime and cause contamination and impaired quality of the industrial product. In this thesis we studied bacterial adherence to abiotic surfaces by using coupons of stainless steel coated or not coated with fluoropolymer or diamond like carbon (DLC). As model organisms we used bacterial isolates from paper machines (Meiothermus silvanus, Pseudoxanthomonas taiwanensis and Deinococcus geothermalis) and also well characterised species isolated from medical implants (Staphylococcus epidermidis). We found that coating of steel surface with these materials reduced its tendency towards biofouling: Fluoropolymer and DLC coatings repelled all four biofilm formers on steel. We found great differences between bacterial species in their preference of surfaces to adhere as well as their ultrastructural details, like number and thickness of adhesion organelles they expressed. These details responded differently towards the different surfaces they adhered to. We further found that biofilms of D. geothermalis formed on titanium dioxide coated coupons of glass, steel and titanium, were effectively removed by photocatalytic action in response to irradiation at 360 nm. However, on non-coated glass or steel surfaces irradiation had no detectable effect on the amount of bacterial biomass. We showed that the adhesion organelles of bacteria on illuminated TiO2 coated coupons were complety destroyed whereas on non-coated coupons they looked intact when observed by microscope. Stainless steel is the most widely used material for industrial process equipments and surfaces. The results in this thesis showed that stainless steel is prone to biofouling by phylogenetically distant bacterial species and that coating of the steel may offer a tool for reduced biofouling of industrial equipment. Photocatalysis, on the other hand, is a potential technique for biofilm removal from surfaces in locations where high level of hygiene is required. Our study of natural biofilms on barley kernel surfaces showed that also there the microbes possessed adhesion organelles visible with electronmicroscope both before and after steeping. The microbial community of dry barley kernels turned into a dense biofilm covered with slimy extracellular polymeric substance (EPS) in the kernels after steeping in water. Steeping is the first step in malting. We also presented evidence showing that certain strains of Lactobacillus plantarum and Wickerhamomyces anomalus, when used as starter cultures in the steeping water, could enter the barley kernel and colonise the tissues of the barley kernel. By use of a starter culture it was possible to reduce the extensive production of EPS, which resulted in a faster filtration of the mash.

Pulp and Paper Fiction: On the Discursive Legitimation of Global Industrial Restructuring

Despite the central role of legitimacy in social and organizational life, we know little of the subtle meaning-making processes through which organizational phenomena, such as industrial restructuring, are legitimated in contemporary society. Therefore, this paper examines the discursive legitimation strategies used when making sense of global industrial restructuring in the media. Based on a critical discourse analysis of extensive media coverage of a revolutionary pulp and paper sector merger, we distinguish and analyze five legitimation strategies: (1) normalization, (2) authorization, (3) rationalization, (4) moralization, and (5) narrativization. We argue that while these specific legitimation strategies appear in individual texts, their recurring use in the intertextual totality of the public discussion establishes the core elements of the emerging legitimating discourse.

The Nature and Change of Bonds in Industrial Business Relationships

A focus on cooperative industrial business relationships has become increasingly important in studies of industrial relationships. If the relationships between companies are strong it is usually a sign that companies will cooperate for a longer time and that may affect companies’ competitive and financial strength positively. As a result the bonds between companies become more important. This is due to the fact that bonds are building blocks of relationships and thus affect the stability in the cooperation between companies. Bond strength affect relationship strength. A framework regarding how bonds develop and change in an industrial business relationship has been developed in the study. Episodes affect the bonds in the relationship strengthening or weakening the bonds in the relationship or preserving status quo. Routine or critical episodes may lead to the strengthening or weakening of bonds as well as the preservation of status quo. The method used for analyzing bond strength trying to grasp the nature and change of bonds was invented by systematically following the elements of the definitions of bonds. A system with tables was drawn up in order to find out if the bond was weak, of medium strength or strong. Bonds are important regulators of industrial business relationships. By influencing the bonds one may have possibilities to strengthen or weaken the business relationship. Strengthen the business relationship in order to increase business and revenue and weaken the relationship in order to terminate business where the revenue is low or where there may be other problems in the relationship. By measuring the strength of different bonds it can be possible to strengthen weak bonds in order to strengthen the relationship. By using bond management it is possible to strategically strengthen or weaken the bonds between the cooperating companies in order to strengthen the cooperation and tie the customer or supplier to the company or weaken the cooperation in order to terminate the relationship. The instrument for the management of bonds is to use the created bond audit in order to know which bonds resources should be focused on in order to increase or decrease their strength.

Customer Needing - Conceptualising Industrial Service from a Customer Perspective

Views on industrial service have conceptually progressed from the output of the provider’s production process to the result of an interaction process in which the customer also is involved. Although there are attempts to be customer-oriented, especially when the focus is on solutions, an industrial company’s offering combining goods and services is inherently seller-oriented. There is, however, a need to go beyond the current literature and company practices. We propose that what is needed is a genuinely customer-based parallel concept to offering that takes the customer’s view and put forward a new concept labelled customer needing. A needing is based on the customer’s mental model of their business and strategies which will affect priorities, decisions, and actions. A needing can be modelled as a configuration of three dimensions containing six functions that create realised value for the customer. These dimensions and functions can be used to describe needings which represent starting points for sellers’ creation of successful offerings. When offerings match needings over time the seller should have the potential to form and sustain successful buyer relationships.

Re-Conceptualizing Value-Creation From Industrial Business Logic to Service Business Logic

There is an urgent interest in marketing to move away from neo-classical value definitions suggesting that value creation is a process of exchanging goods for money. In the present paper, value creation is conceptualized as an integration of two distinct, yet closely coupled processes. First, actors co-create what this paper calls an underlying basis of value. This is done by interactively re-configuring resources. By relating and combining resources, activity sets, and risks across actor boundaries in novel ways actors create joint productivity gains – a concept very similar to density (Normann, 2001). Second, actors engage in a process of signification and evaluation. Signification implies co-constructing the meaning and worth of joint productivity gains co-created through interactive resource re-configuration, as well as sharing those gains through a pricing mechanism as value to involved actors. The conceptual framework highlights an all-important dynamics associated with ´value creation´ and ´value´ - a dynamics the paper claims has eluded past marketing research. The paper argues that the framework presented here is appropriate for the interactive service perspective, where value and value creation are not objectively given, but depend on the power of involved actors´ socially constructed frames to mobilize resources across actor boundaries in ways that ´enhance system well-being´ (Vargo et al., 2008). The paper contributes to research on Service Logic, Service-Dominant Logic, and Service Science.