Evolution of representation of the hands in plastic arts

A interação entre arte e ciência foi intensa durante o Renascimento, sofrendo declínio nos anos posteriores com retomada significativa no século XX, principalmente com o uso de técnicas de identificação, datação de obras de arte e o desenvolvimento de novos materiais. O relacionamento entre artes plásticas e Cirurgia da Mão mantêm-se intenso , sendo freqüente o uso de reproduções artísticas da mão nas ilustrações de textos científicos. Objetivando compreender o papel da mão nas artes plásticas, reproduções de obras de artes (esculturas e pinturas) representativas de vários estilos ou períodos da história da arte foram analisadas com enfoque no estudo das mãos. Detalhes anatômicos, relacionamento com outras estruturas do corpo humano, papel na composição e aspectos simbólicos das mãos foram estudados no contexto histórico e artístico de obras de arte do período paleolítico (pré-história) até o século XX. A representação da mão nas artes plásticas está diretamente relacionada ao estilo ou período da obra e à capacidade individual de interpretação e execução do artista.

Detection of enterotoxin genes of Staphylococcus sp isolated from nasal cavities and hands of food handlers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Electromyographic study in Erector spinae, Rectus abdominis, Glutaeous maximus and Rectus femuris muscles, in standing and static posture with load on hands

Observe the loads associates application with in position of body, in the static or dynamic postures. Methods: the electromyographic study in erector spinae, rectus abdominis, glutaeous maximus and rectus femoris muscles was accomplished in female volunteers from 18 have 27 years old, previously selected. The muscles electric activities was gotten with surface electrodes, in standing and static posture, with the parallels and horizontal upper limbs with load on their hands. Conclusion: In this study it was clearly observed influence of the load and distance there is over studied musculature associated with standing erect posture.

The natural history of carpal tunnel syndrome: A study of 20 hands evaluated 4 to 9 years after initial diagnosis

Carpal tunnel syndrome (CTS) is the most frequent entrapment neuropathy. In the last decade several papers have been published on epidemiology, clinical aspects, diagnosis, and treatment, but little is known about its natural history. The objective of this work was to study the natural history of CTS syndrome. From 358 patients with clinical and conduction study diagnosis of CTS, 12 cases were identified that had refused surgical treatment, had not used anti-inflammatory medications, and had not undergone orthopaedic procedures, such as immobilization or anaesthetic infiltration. These 12 patients have 20 compromised hands which have been followed up for between 4 and 9 years. In all cases sensory and motor conduction studies were performed on the median nerve, at the beginning and end of follow-up period. Electrical improvement was marked in 5 hands and slight in 3; there was no significant change in 10, and deterioration in 2. As 8 hands (7 patients) showed improved clinical symptoms and conduction studies over several years, this brings the universally accepted procedure of surgical treatment into doubt.

High tech garbage can help engineering colleges to improve hands-on education

This paper presents a discussion on the potential use of high tech garbage, including electronic waste (e-waste), as a source of mechanisms, sensors and actuators, that can be adapted to improve the reality of microprocessor systems labs, at low cost. By means of some examples, it is shown that entire subsystems withdrawn of high tech equipments can be easily integrated into existing laboratory infrastructure. As examples, first a precision positioning mechanism is presented, which was taken from a discarded commercial ink jet printer and interfaced with a microprocessor board used in the laboratory classes. Secondly, a read/write head and its positioning mechanism has been withdrawn of a retired CD/DVD drive and again interfaced with the microprocessor board. Students who have been using these new experiments strongly approve their inclusion in the lab schedules. © 2011 IEEE.

Mental rotation of anthropoid hands: a chronometric study

It has been shown that mental rotation of objects and human body parts is processed differently in the human brain. But what about body parts belonging to other primates? Does our brain process this information like any other object or does it instead maximize the structural similarities with our homologous body parts? We tried to answer this question by measuring the manual reaction time (MRT) of human participants discriminating the handedness of drawings representing the hands of four anthropoid primates (orangutan, chimpanzee, gorilla, and human). Twenty-four right-handed volunteers (13 males and 11 females) were instructed to judge the handedness of a hand drawing in palm view by pressing a left/right key. The orientation of hand drawings varied from 0º (fingers upwards) to 90º lateral (fingers pointing away from the midline), 180º (fingers downwards) and 90º medial (finger towards the midline). The results showed an effect of rotation angle (F(3, 69) = 19.57, P < 0.001), but not of hand identity, on MRTs. Moreover, for all hand drawings, a medial rotation elicited shorter MRTs than a lateral rotation (960 and 1169 ms, respectively, P < 0.05). This result has been previously observed for drawings of the human hand and related to biomechanical constraints of movement performance. Our findings indicate that anthropoid hands are essentially equivalent stimuli for handedness recognition. Since the task involves mentally simulating the posture and rotation of the hands, we wondered if "mirror neurons" could be involved in establishing the motor equivalence between the stimuli and the participants' own hands.

The influence of handrim design on the contact forces on hands'surface: a preliminary study

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Using a pressure mapping system to evaluate contact pressure on hands during use of axillary crutches

The aim of this study was to evaluate different handles used in axillary crutches with a Pressure Mapping System. The Grip Versatek system from Tekscan Inc. was used to measure the levels and the distribution of contact pressure in the hands during a simulated activity of ambulation with crutches. The sample included ten able-bodied subjects: five men and five women. The results show that the different models of handles appear to have influenced the pressure levels measured during the activity. Therefore, the measurement equipment provides parameters that allow the comparison among different designs and assess their contribution to the comprehension of the demands of ergonomic handles.

Bacteria on the hands of school-age children at a Pediatric Hospitalization Unit

Objective. To estimate the prevalence of bacteria isolated in samples from the hands of school-age children at a hospitalization unit. Methodology. In 2009, strains were cultured from the hands of 90 school-age children at the pediatric hospitalization unit of Hospital Estadual Bauru (São Paulo, Brazil). After culture of the samples, the isolated bacteria were identified. Results. In 98% of the samples taken from the children, bacteria were isolated. Coagulase-negative Staphilococcus was isolated in 64% of the samples, followed by Staphilococcus aureus (5%) and Pseudomonas aeruginosa (1%). Conclusion. In most of the samples from the children’s hands, bacteria were isolated. Therefore, educative actions about hygiene habits in- and outside the hospital environment should be reinforced, aimed at children and their companions.

Hands-on experiments in the Practicum: repositioning student teachers' autonomy.

Following a worldwide trend, the Initial Teacher Education (ITE) Programmes in Brazil are recently searching for ways of integrating practice into curriculum. It raises question about what practice must be integrated and how. Notably, university-based courses are disconnected from school and have low commitment with school issues (Zeichner, 2009).The student teacher induction into school daily life is not an easy task, mainly when the practitioners are transforming physics classroom practice toward an active learning. Drawing on cultural-historical framework (Wolff-Michael Roth & Lee, 2007; Vygotsky, 1978) this study addresses the articulation between Practicum in Physics Classes and the Hands-on Experiments (HoE) used throughout the Practicum. Although in a different level, both Practicum and HoE are linked with an idea of practice. Particularly, this study focuses on how HoE might foster student teachers' autonomy and agency in the Practicum. Data was gathered in the course Practice of Physics Teaching at University of São Paulo/Brazil in 2010; in a cohort of 60 student teachers doing a year-long Practicum in urban school in São Paulo city. Data was analysed using qualitative research methods (Roth, 2005), based on 14 interviews and video records of the student teacher preparing the HoE for Practicum we will present in general lines the role of HoE for student teacher autonomy.

Design and Control of Robotic Hands

The application of dexterous robotic hands out of research laboratories has been limited by the intrinsic complexity that these devices present. This is directly reflected as an economically unreasonable cost and a low overall reliability. Within the research reported in this thesis it is shown how the problem of complexity in the design of robotic hands can be tackled, taking advantage of modern technologies (i.e. rapid prototyping), leading to innovative concepts for the design of the mechanical structure, the actuation and sensory systems. The solutions adopted drastically reduce the prototyping and production costs and increase the reliability, reducing the number of parts required and averaging their single reliability factors. In order to get guidelines for the design process, the problem of robotic grasp and manipulation by a dual arm/hand system has been reviewed. In this way, the requirements that should be fulfilled at hardware level to guarantee successful execution of the task has been highlighted. The contribution of this research from the manipulation planning side focuses on the redundancy resolution that arise in the execution of the task in a dexterous arm/hand system. In literature the problem of coordination of arm and hand during manipulation of an object has been widely analyzed in theory but often experimentally demonstrated in simplified robotic setup. Our aim is to cover the lack in the study of this topic and experimentally evaluate it in a complex system as a anthropomorphic arm hand system.

Sistemi hands-free basati su smart-glass a supporto di attivita di customer care di un'impresa

Da alcuni anni in ambito business ed enterprise si sta diffondendo l'utilizzo di dispositivi wearable al fine di rendere più efficiente ed efficace la gestione di molteplici attività e processi aziendali. I sistemi hand-held comunemente utilizzati in ambito lavorativo, tra cui smartphone e tablet, spesso non risultano idonei in contesti in cui un operatore debba interagire con il dispositivo mentre ha le proprie mani impegnate con attrezzature e strumenti di lavoro. I sistemi hands-free rimediano a tali problematiche supportando tecniche di interazione non convenzionali che consentono all'operatore di mantenere libere le proprie mani durante la consultazione del dispositivo e di rimanere concentrato sull'attività che sta svolgendo. I sistemi basati su smart-glass, oltre ad offrire funzionalità hands-free, presentano l'ulteriore vantaggio di poter presentare all'interno del campo visivo dell'utente importanti informazioni di supporto inerenti all'attività che sta svolgendo, avvalendosi anche dell'utilizzo di tecnologie di realtà aumentata. La sinergia tra dispositivi basati su smart-glass e tecniche di realtà aumentata sta destando un crescente interesse sia in ambito accademico che industriale; esiste la possibilità che in un prossimo futuro questa tipologia di sistemi divenga la nuova piattaforma computazionale enterprise di riferimento. L'obiettivo di questo lavoro di tesi è stato lo studio e la progettazione di una soluzione hands-free basata su smart-glass in grado di supportare alcune attività di customer care del Gruppo Loccioni, una società che si occupa dello sviluppo di sistemi automatici di misura e controllo per migliorare la qualità, l'efficienza e la sostenibilità di prodotti, processi ed edifici. In particolare, il sistema sviluppato ha consentito di migliorare la gestione dei processi di manutenzione e riparazione degli impianti energetici sostenibili che il Gruppo Loccioni installa presso le sedi di imprese clienti.

Studio e Progettazione di Sistemi Hands-free basati su Tecnologie Wearable: Un Caso di Studio in Ambito Healthcare

Il percorso intrapreso per la scrittura della tesi, si snoda essenzialmente in due fasi e nove capitoli. La prima fase ha avuto come scopo l’analisi dal punto di vista tecnologico dell’evoluzione tecnologica avuta nel campo di realtà aumentata e dispositivi wearable in particolare orientandosi verso una tipologia di interazioni hands-free. Questo ha portato ad una ricognizione sullo stato dell’arte permettendo di attenere una base di conoscenza solida per la costruzione del sistema presentato all’interno del caso di studi. I capitoli successivi, in particolare dal quinto, introducono alla seconda fase ed hanno lo scopo di progettare e realizzare il sistema proposto, partendo da un’attenta analisi delle caratteristiche richieste passando per la prototipazione e successiva definizione delle caratteristiche atte alla valutazione del sistema stesso.

Active processes, morphology, and dynamics of icy debris fans: Landform evolution along rapidly degrading escarpments in alpine regions undergoing recent deglaciation

In the past few decades the impacts of climate warming have been significant in alpine glaciated regions. Many valley glaciers formerly linked as distributary glaciers to high-level icecaps have decoupled at their icefalls, exposing major escarpments and generating a suite of dynamic landforrns dominated by mass wasting. Ice-dominated landforms, here termed icy debris fans, develop rapidly by ice avalanching, rockfall, and icy debris flow. Field-based reconnaissance studies at two alpine settings, the Wrangell Mountains of Alaska and the Southern Alps of New Zealand, provide a preliminary morphogenetic model of spatial and temporal evolution of icy debris fans in a range of alpine settings. The influence of these processes on landform evolution is largely unrecognized in the literature dealing with post-glacial landform adjustment known as the paraglacial. A better understanding of these dynamic processes will be increasingly important because of the extreme geohazards characterizing these areas. Our field studies show that after glacier decoupling, icy debris fans begin to form along the base of bedrock escarpments at the mouths of catchments and prograde over valley glaciers. The presence of a distinct catchment, apex, and fan morphology distinguishes these landforms from other landforms common in periglacial hillslope settings receiving abundant clastic debris and ice. Ice avalanching is the most abundant process involved in icy debris fan formation. Fans developed below weakly incised catchments are dominated by ice avalanching and are composed primarily of ice with minor lithic detritus. Typically, avalanches fall into the fan catchments where sediments transform into grainflows that flow onto the fans. Once on the fans, avalanche deposits ablate rapidly, flattening and concentrating lithic fragments at the surface. Icy debris fans may become thick enough to become glaciers with splay crevasse systems. Fans developed below larger, more complex catchments are composed of higher proportions of lithic detritus resulting from temporary storage of ice and lithic detritus deposits within the catchment. Episodic outbursts of meltwater from the icecap may mix with the stored sediments and mobilize icy debris flows (mixture of ice and lithic clasts) onto the fans. Our observations indicate that the entire evolutionary cycle of icy debris fans probably occurs during an early paraglacial interval (i.e., decades to 100 years). Observations comparing avalanche frequency, volume, and fan morphologic evolution at the Alaska site between 2006 and 2010 illustrate complex response between icy debris fans even within the same cirque - where one fan may be growing while others are downwasting because of differences in ice supply controlled by their respective catchments and icecap contributions. As ice supply from the icecap diminishes through time, icy debris fans rapidly downwaste and eventually evolve into talus cones that receive occasional but ephemeral ice avalanches.