Magnetospheric access of solar particles and the configuration of the distant geomagnetic field

The access of 1.2-40 MeV protons and 0.4-1.0 MeV electrons from interplanetary space to the polar cap regions has been investigated with an experiment on board a low altitude, polar orbiting satellite (OG0-4).

A total of 333 quiet time observations of the electron polar cap boundary give a mapping of the boundary between open and closed geomagnetic field lines which is an order of magnitude more comprehensive than previously available.

Persistent features (north/south asymmetries) in the polar cap proton flux, which are established as normal during solar proton events, are shown to be associated with different flux levels on open geomagnetic field lines than on closed field lines. The pole in which these persistent features are observed is strongly correlated to the sector structure of the interplanetary magnetic field and uncorrelated to the north/south component of this field. The features were observed in the north (south) pole during a negative (positive) sector 91% of the time, while the solar field had a southward component only 54% of the time. In addition, changes in the north/south component have no observable effect on the persistent features.

Observations of events associated with co-rotating regions of enhanced proton flux in interplanetary space are used to establish the characteristics of the 1.2 - 40 MeV proton access windows: the access window for low polar latitudes is near the earth, that for one high polar latitude region is ~250 R_⊕ behind the earth, while that for the other high polar latitude region is ~1750 R_⊕ behind the earth. All of the access windows are of approximately the same extent (~120 R_⊕). The following phenomena contribute to persistent polar cap features: limited interplanetary regions of enhanced flux propagating past the earth, radial gradients in the interplanetary flux, and anisotropies in the interplanetary flux.

These results are compared to the particle access predictions of the distant geomagnetic tail configurations proposed by Michel and Dessler, Dungey, and Frank. The data are consistent with neither the model of Michel and Dessler nor that of Dungey. The model of Frank can yield a consistent access window configuration provided the following constraints are satisfied: the merging rate for open field lines at one polar neutral point must be ~5 times that at the other polar neutral point, related to the solar magnetic field configuration in a consistent fashion, the migration time for open field lines to move across the polar cap region must be the same in both poles, and the open field line merging rate at one of the polar neutral points must be at least as large as that required for almost all the open field lines to have merged in 0 (one hour). The possibility of satisfying these constraints is investigated in some detail.

The role played by interplanetary anisotropies in the observation of persistent polar cap features is discussed. Special emphasis is given to the problem of non-adiabatic particle entry through regions where the magnetic field is changing direction. The degree to which such particle entry can be assumed to be nearly adiabatic is related to the particle rigidity, the angle through which the field turns, and the rate at which the field changes direction; this relationship is established for the case of polar cap observations.

Parametric excitation of Rb-87 atoms in a quadrupole-Ioffe-configuration trap

We have experimentally studied the parametric excitation of Rb-87 atoms in a quadrupole-Ioffe-configuration trap. The temperature of an atomic cloud and number of trapped atoms versus time and modulation frequency of the parametric excitation field have been measured. We also noticed that the contribution of atomic collisions to the energy distributions can not be ignored in the case of weak excitation, which results in a lower temperature of the atomic cloud than by Gehm [Phys. Rev. A 58, 3914 (1998)] predicted.

Effects of injection nozzle configuration on secondary injection into supersonic flow

Gaseous nitrogen and argon were injected into a primary stream of air moving at Mach 2.56. The gases were injected at secondary to primary total pressure ratios from 3.2 to 28.6 through four different nozzles. Two nozzles, one sonic and one supersonic (M = 3.26), injected normal to the primary stream; and two sonic nozzles injected at 45° angles to the primary flow, one injecting upstream and the other downstream. Data consisted of static pressure measurements on the wall near the injector, total pressure profiles in the wake of the injectant plume, and concentration measurements downstream of the flow. Scale parameters were calculated based upon an analytical model of the flow field and their validity verified by experimental results. These scale heights were used to compare normalized wall side forces for the different nozzles and to compare the mixing of the two streams.

Comparison of Yb-doped fiber laser with one-end and double-end pumping configuration

A high-power Ytterbium-doped fiber laser (YDFL) with homemade double clad fiber (DCF) is introduced in this paper. The output power characteristics of a linear cavity fiber laser have been studied theoretically by solving the rate equations and experimentally tested with single- and double-end-pumping configurations. When both ends of the fiber are pumped by two high-power laser diodes with a launched power of similar to 300 W each, a maximum CW output of 444 W is obtained with a slope efficiency of similar to 75%. (c) 2006 Elsevier Ltd. All rights reserved.

Enhancement of near-band-edge photoluminescence of ZnO thin films in sandwich configuration at room temperature

ZnO/ITO/ZnO sandwich structure films were fabricated. The effects of buffer layer on the structure and optical properties of ZnO films were investigated by x-ray diffraction (XRD), photoluminescence, optical transmittance, and absorption measurements. XRD spectra indicate that a buffer layer has the effects of lowering the grain orientation of ZnO films and increasing the residual stresses in the films. The near-band-edge emissions of ZnO films deposited on both single indium tin oxide (ITO) buffer and ITO/ZnO double buffers are significantly enhanced compared with that deposited on a bare substrate due to the quantum confinement effect. (C) 2006 American Institute of Physics.

Prosomal-width-to-weight relationships in American horseshoe crabs (Limulus polyphemus): examining conversion factors used to estimate landings

Horseshoe crabs (Limulus polyphemus) are valued by many stakeholders, including the commercial fishing industry, biomedical companies, and environmental interest groups. We designed a study to test the accuracy of the conversion factors that were used by NOAA Fisheries and state agencies to estimate horseshoe crab landings before mandatory reporting that began in 1998. Our results indicate that the NOAA Fisheries conversion factor consistently overestimates the weight of male horseshoe crabs, particularly those from New England populations. Because of the inaccuracy of this and other conversion factors, states are now mandated to report the number (not biomass) and sex of landed horseshoe crabs. However, accurate estimates of biomass are still necessary for use in prediction models that are being developed to better manage the horseshoe crab fishery. We recommend that managers use the conversion factors presented in this study to convert current landing data from numbers to biomass of harvested horseshoe crabs for future assessments.

Experiments in gear configuration to reduce bycatch in an estuarine squid-trawl fishery

Three experiments were performed in an estuarine squid-trawl fishery in New South Wales, Australia, to test modifications to trawl nets. Lateral mesh openings were experimentally increased and physical bycatch reduction devices (BRDs) were placed in codends. These modifications aimed to reduce nontargeted catches of fish, while maintaining catches of the targeted broad squid (Photololigo etheridgei) and bottle squid (Loliolus noctiluca). Compared to conventional codends made with 41-mm diamond mesh, codends made with different posterior circumferences and larger 45-mm mesh had no significant effect on the catches of any species. The best performing configurations involved the installation of BRDs designed to separate organisms according to differences in behavior. In particular, versions of a composite square-mesh panel reduced the total weight of bycatch by up to 71% and there was no significant effect on the catches of squid. The results are discussed in terms of the probable differences in behavior between fish and squid in codends. After this study, a square-mesh panel BRD was voluntarily adopted throughout the fishery.

Abundance of adult horseshoe crabs (Limulus polylphemus) in Delaware Bay estimated from a bay-wide mark-recapture study

Estimates of the abundance of American horseshoe crabs (Limulus polyphemus) are important to determine egg production and to manage populations for the energetic needs of shorebirds that feed on horseshoe crab eggs. In 2003, over 17,500 horseshoe crabs were tagged and released throughout Delaware Bay, and recaptured crabs came from spawning surveys that were conducted during peak spawning. We used two release cohorts to test for a temporary effect of tagging on spawning behavior and we adjusted the number of releases according to relocation rates from a telemetry study. The abundance estimate was 20 million horseshoe crabs (90 % confidence interval: 13−28 million), of which 6.25 million (90% CI: 4.0−8.8 million) were females. The combined harvest rate for Delaware, New Jersey, Virginia, and Maryland in 2003 was 4% (90% CI: 3−6%) of the abundance estimate. Over-wintering of adults in Delaware Bay could explain, in part, differences in estimates from ocean-trawl surveys. Based on fecundity of 88,000 eggs per female, egg production was 5.5×1011 (90% CI: 3.5×1011, 7.7×1011), but egg availability for shorebirds also depended on overlap between horseshoe crab and shorebird migrations, density-dependent bioturbation, and wave-mediated vertical transport.

A production modeling approach to the assessment of the horseshoe crab (Limulus polyphemus) population in Delaware Bay

Horseshoe crab (Limulus polyphemus) is harvested commercially, used by the biomedical industry, and provides food for migrating shorebirds, particularly in Delaware Bay. Recently, decreasing crab population trends in this region have raised concerns that the stock may be insufficient to fulfill the needs of these diverse user groups. To assess the Delaware Bay horseshoe crab population, we used surplus production models (programmed in ASPIC), which incorporated data from fishery-independent surveys, fishery-dependent catch-per-unit-of-effort data, and regional harvest. Results showed a depleted population (B2003/=0.03−0.71) BMSY and high relative fishing mortality /FMSY=0.9−9.5). Future harvest (F2002strategies for a 15-year period were evaluated by using population projections with ASPICP software. Under 2003 harvest levels (1356 t), population recovery to BMSY would take at least four years, and four of the seven models predicted that the population would not reach BMSY within the 15year period. Production models for horseshoe crab assessment provided management benchmarks for a species with limited data and no prior stock assessment

Potential causes of mortality for horseshoe crabs (Limulus polyphemus) during the biomedical bleeding process

Biomedical companies catch and bleed horseshoe crabs for the production of Limulus amebocyte lysate (LAL), a product used for protecting public health (Berkson and Shuster, 1999). LAL is a clotting agent, derived solely from horseshoe crab blood cells, which is used to detect the presence of pathogenic gramnegative bacteria in injectable drugs and implantable medical and dental devices (Mikkelsen, 1988; Novitsky, 1991). In addition, LAL is used in many diagnostic tests for such illnesses as gram-negative bacterial meningitis and typhoid fever (Ding and Ho, 2001). Because the LAL test allows one to detect femtogram levels of endotoxin (Ding and Ho, 2001), it is the most effective test for detecting endotoxin contamination, and its increasing use in medical and pharmaceutical laboratories makes it a highly valued product.