Obtention of injectable platelets rich-fibrin (i-PRF) and its polymerization with bone graft: technical note

The use of autologous platelet concentrates, represent a promising and innovator tools in the medicine and dentistry today. The goal is to accelerate hard and soft tissue healing. Among them, the platelet-rich plasma (PRP) is the main alternative for use in liquid form (injectable). These injectable form ofplatelet concentrates are often used in regenerative procedures and demonstrate good results. The aim of this study is to present an alternative to these platelet concentrates using the platelet-rich fibrin in liquid form (injectable) and its use with particulated bone graft materials in the polymerized form.

Outbreaks of rhinofacial and rhinopharyngeal zygomycosis in sheep in Paraíba, northeastern Brazil

Two outbreaks of zigomycosis with rhinofacial and two other with rhinopharyngeal lesions involving fungi with filamentous coaenocytic hyphae characteristic of entomoph-thoramycetous fungi are reported in the state of Paraíba, northeastern Brazil. One outbreak of rhinofacial zygomycosis occurred during the rainy season affecting 5 sheep. Another outbreak of the clinical form affected one out of 40 sheep during the dry season. Common clinical signs of the rhinofacial infection were bilateral serosanguineous nasal discharge with swelling of nostrils, upper lip, and the skin of the face. At necropsy the nasal mucosa showed dark brownish ulcerated areas which extended from the mucocutaneous region to 10cm inside the nasal vestibule. The mucosa of the hard palate was also ulcerated. The cutting surface of nostrils and palate showed a brownish or red spongeous tissue of friable consistency. One outbreak of rhinopharyngitis took place on an irrigated coconut farm; 7 out of 60 adult sheep were affected. Another outbreak affected a sheep in a flock of 80 during the dry season. Clinical signs as noisy respiration and dyspnoea due to mechanical blockage of the nasal cavities, swelling of the nostrils, and serosanguineous nasal discharge were observed. Six out of 8 sheep in this group showed exophthalmia, keratitis and unilateral corneal ulceration of the eye. The sheep either died of their infection or were euthanized after a clinical course of 7-30 days. At necropsy there was a dense yellow exudate in the nasopharyngeal area affecting the ethmoidal region, turbinate bones, paranasal sinuses, hard and soft palates, orbital cavity, pharynges, regional muscles and lymph nodes. Histopathologically both forms of the disease showed multifocal granulomas with an eosinophilic necrotic reaction (Splendore-Hoeppli phenomenon) containing ribbon-type coenocytic hyphae with 7-30mum in diameter similar to hyphae of zygomycetous fungi, possibly Conidiobolus spp. Outbreaks of both forms of mycotic rhinitis are common in northeastern Brazil and in other regions of the country.

Use of fiber-reinforced composite framework and thermochromic pigment in maxillofacial prostheses

The purpose of this investigation was to evaluate the possibility to enhance certain qualities of facial prostheses. Polymethyl methacrylate is still being used as base mate¬rial or clip carrier material, but it is hard and heavy, and debonding of the silicone from the acrylic base material is a frequent problem. This thesis aims to evaluate the use of fiber-reinforced composite (FRC) as framework material for maxillofacial silicone prostheses. FRC has been used as reinforcement in removable and fixed partial dentures since the 1990s. This material is lightweight and can be fabricated to compress the margins of the prosthesis slightly, to keep it tightly against the skin during jaw movements and facial expressions. Additionally, the use of a thermochromic pigment, colorless in room temperature and red in a cold environment, was studied in order to evaluate the possibility of using this color changing pigment in facial prostheses to mimic the color change of facial skin in cold weather. The tensile bond strength between pre-impregnated, unidirectional FRC and maxillofacial silicone elastomer was studied. Three different bonding agents or primers were compared. Bond strength was improved by one of the primers and by roughening the surface. The effect of a skin compressing glass fiber-reinforced composite framework on facial skin blood flow was studied by using a face mask, constructed with a compression pad corresponding to the outer margin of a glass fiber-reinforced framework beam of a facial prosthesis. The skin blood flow of ten healthy volunteers, aged 23-25 years, was measured during touch, light, and moderate compression of the skin, by using laser Doppler imaging technique. None of the compressions showed any marked effects on local skin blood flow. There were no significant differences between blood flow during compression and at baseline. Maxillofacial silicone elastomer was colored intrinsically with conventional color pigments: a control group containing only conventional pigments was compared to two test groups with 0.2 wt% and 0.6 wt% thermochromic pigment added. The color of the material was measured with a spectrophotometer in room temperature and after storage in a freezer. The color stability of the maxillofacial silicone elastomer colored with thermo¬chromic pigment was evaluated by artificial aging. The color dif¬ference of the L* (lightness) and a* values (redness), comparing color after the samples were stored at room temperature and in a freezer (-19°C), was statistically significant for both 0.2 wt% and 0.6 wt% thermo¬chromic pigment groups. The differences in the b* values (yellowness) were statistically significant for the 0.6 wt% group. Exposure to ultraviolet (UV) radiation led to visually noticeable and statistically signifi¬cant color changes (ΔE) in all color values in both test groups. The specimens containing thermochromic pigment were very sensitive to UV radiation. In conclusion, a framework of fiber-reinforced composite can successfully be bonded to maxillofacial silicone elastomer, and a framework beam, compressing the facial skin, did not remarkably alter the skin blood flow on healthy, young adults. The thermochromic pigment showed color change in maxillofacial silicone elastomer. However, artificial aging showed that it was too sensitive to UV radiation to be used, as such, in maxillofacial prostheses.

Development and characterization of thin printed films for gas sensing applications

The monitoring and control of hydrogen sulfide (H2S) level is of great interest for a wide range of application areas including food quality control, defense and antiterrorist applications and air quality monitoring e.g. in mines. H2S is a very poisonous and flammable gas. Exposure to low concentrations of H2S can result in eye irritation, a sore throat and cough, shortness of breath, and fluid retention in the lungs. These symptoms usually disappear in a few weeks. Long-term, low-level exposure may result in fatigue, loss of appetite, headache, irritability, poor memory, and dizziness. Higher concentrations of 700 - 800 ppm tend to be fatal. H2S has a characteristic smell of rotten egg. However, because of temporary paralysis of olfactory nerves, the smelling capability at concentrations higher than 100 ppm is severely compromised. In addition, volatile H2S is one of the main products during the spoilage of poultry meat in anaerobic conditions. Currently, no commercial H2S sensor is available which can operate under anaerobic conditions and can be easily integrated in the food packaging. This thesis presents a step-wise progress in the development of printed H2S gas sensors. Efforts were made in the formulation, characterization and optimization of functional printable inks and coating pastes based on composites of a polymer and a metal salt as well as a composite of a metal salt and an organic acid. Different processing techniques including inkjet printing, flexographic printing, screen printing and spray coating were utilized in the fabrication of H2S sensors. The dispersions were characterized by measuring turbidity, surface tension, viscosity and particle size. The sensing films were characterized using X-ray photoelectron spectroscopy, X-ray diffraction, atomic force microscopy and an electrical multimeter. Thin and thick printed or coated films were developed for gas sensing applications with the aim of monitoring the H2S concentrations in real life applications. Initially, a H2S gas sensor based on a composite of polyaniline and metal salt was developed. Both aqueous and solvent-based dispersions were developed and characterized. These dispersions were then utilized in the fabrication of roll-to-roll printed H2S gas sensors. However, the humidity background, long term instability and comparatively lower detection limit made these sensors less favourable for real practical applications. To overcome these problems, copper acetate based sensors were developed for H2S gas sensing. Stable inks with excellent printability were developed by tuning the surface tension, viscosity and particle size. This enabled the formation of inkjet-printed high quality copper acetate films with excellent sensitivity towards H2S. Furthermore, these sensors showed negligible humidity effects and improved selectivity, response time, lower limit of detection and coefficient of variation. The lower limit of detection of copper acetate based sensors was further improved to sub-ppm level by incorporation of catalytic gold nano-particles and subsequent plasma treatment of the sensing film. These sensors were further integrated in an inexpensive wirelessly readable RLC-circuit (where R is resistor, L is inductor and C is capacitor). The performance of these sensors towards biogenic H2S produced during the spoilage of poultry meat in the modified atmosphere package was also demonstrated in this thesis. This serves as a proof of concept that these sensors can be utilized in real life applications.

The effect of cationic-anionic polyelectrolyte multilayer surface treatment on inkjet ink spreading and print quality

The focus of the work reported in this thesis was to study and to clarify the effect of polyelectrolyte multilayer surface treatment on inkjet ink spreading, absorption and print quality. Surface sizing with a size press, film press with a pilot scale coater, and spray coating, have been used to surface treat uncoated wood-free, experimental wood-free and pigmentcoated substrates. The role of the deposited cationic (polydiallydimethylammonium chloride, PDADMAC) and anionic (sodium carboxymethyl cellulose, NaCMC) polyelectrolyte layers with and without nanosilica, on liquid absorption and spreading was studied in terms of their interaction with water-based pigmented and dye-based inkjet inks. Contact angle measurements were made in attempt to explain the ink spreading and wetting behavior on the substrate. First, it was noticed that multilayer surface treatment decreased the contact angle of water, giving a hydrophilic character to the surface. The results showed that the number of cationic-anionic polyelectrolyte layers or the order of deposition of the polyelectrolytes had a significant effect on the print quality. This was seen for example as a higher print density on layers with a cationic polyelectrolyte in the outermost layer. The number of layers had an influence on the print quality; the print density increased with increasing number of layers, although the increase was strongly dependent on ink formulation and chemistry. The use of nanosilica clearly affected the rate of absorption of polar liquids, which also was seen as a higher density of the black dye-based print. Slightly unexpected, the use of nanosilica increased the tendency for lateral spreading of both the pigmented and dye-based inks. It was shown that the wetting behavior and wicking of the inks on the polyelectrolyte coatings was strongly affected by the hydrophobicity of the substrate, as well as by the composition or structure of the polyelectrolyte layers. Coating only with a cationic polyelectrolyte was not sufficient to improve dye fixation, but it was demonstrated that a cationic-anionic-complex structure led to good water fastness. A threelayered structure gave the same water fastness values as a five-layered structure. Interestingly, the water fastness values were strongly dependent not only on the formed cation-anion polyelectrolyte complexes but also on the tendency of the coating to dissolve during immersion in water. Results showed that by optimizing the chemistry of the layers, the ink-substrate interaction can be optimized.

Seed anatomy and germination of Phoenix roebelenii O'Brien (Arecaceae)

The objective of this study was to investigate the morphology, anatomy and germination behaviour of Phoenix roebelenii seeds. Biometric data were obtained by measuring 100 seeds extracted from recently harvested fruits and air-dried for one day. Four replications of 50 seeds each were previously treated with Vitavax-Thiran and then put to germinate in Sphagnum sp. in plastic trays at room temperature. Morphological details of the seeds were documented with the help of a scanning electronic microscope and then drawings were made with the help of a clear camera coupled to a stereomicroscope. Permanent lamina containing embryo sections were prepared to study its anatomy. The mean dimensions of the seeds were: length of 10.32mm, width of 5.21mm and thickness of 3.91mm. The weight of one thousand seeds was of 151.1g and the mean number of units.kg-1 was 6,600. Germination started between 27 and 58 days after sowing. The seeds are of the albuminous type, the endosperm is hard and the embryo (which is not clearly differentiated) occupies a lateral and peripheral position. During seed germination, seedling protrusion begins with the opening of an operculum, through which the cotyledon petiole is emitted with the embryonic axis at its tip. The portion of the cotyledon petiole that remains inside the seeds acts as a haustorium for the absorption of nutrients from the endosperm. The plumule emerges through a rift in the posterior part of the cotyledon. Secondary roots are observed to grow from the anterior part of the primary root.

Synthesis and characterization of nanoperforated metal oxide thin films

For advanced devices in the application fields of data storage, solar cell and biosensing, one of the major challenges to achieve high efficiency is the fabrication of nanopatterned metal oxide surfaces. Such surfaces often require both precise structure at the nanometer scale and controllable patterned structure at the macro scale. Nowadays, the dominating candidates to fabricate nanopatterned surfaces are the lithographic technique and block-copolymer masks, most of which are unfortunately costly and inefficient. An alternative bottom-up approach, which involves organic/inorganic self-assembly and dip-coating deposition, has been studied intensively in recent years and has proven to be an effective technique for the fabrication of nanoperforated metal oxide thin films. The overall objective of this work was to optimize the synthesis conditions of nanoperforated TiO2 (NP-TiO2) thin films, especially to be compatible with mixed metal oxide systems. Another goal was to develop fabrication and processing of NP-TiO2 thin films towards largescale production and seek new applications for solar cells and biosensing. Besides the traditional dip-coating and drop-casting methods, inkjet printing was used to prepare thin films of metal oxides, with the advantage of depositing the ink onto target areas, further enabling cost-effective fabrication of micro-patterned nanoperforated metal oxide thin films. The films were characterized by water contact angle determination, Atomic Force Microscopy, Scanning Electron Microscopy, X-ray Photoelectron Spectroscopy and Grazing Incidence XRay Diffraction. In this study, well-ordered zinc titanate nanoperforated thin films with different Zn/Ti ratios were produced successfully with zinc precursor content up to 50 mol%, and the dominating phase was Zn2Ti3O8. NP-TiO2 structures were also obtained by a cost-efficient means, namely inkjet printing, at both ambient temperature and 60 °C. To further explore new biosensing applications of nanoperforated oxide thin films, inkjet printing was used for the fabrication of both continuous and patterned polymeric films onto NP-TiO2 and perfluorinated phosphate functionalized NP-TiO2 substrates, respectively. The NP-TiO2 films can be also functionalized with a fluoroalkylsilane, resulting in hydrophobic surfaces on both titania and silica. The surface energy contrast in the nanoperforations can be tuned by irradiating the films with UV light, which provides ideal model systems for wettability studies.

Secretory immunity in overweight and obese versus normal-weight early-and late-pubertal females

Obesity is a condition associated with a wide variety of health problems including hypertension, dyslipidemia, diabetes mellitus, certain forms of cancer, cardiovascular disease, and gallstones (157). TTiere is growing evidence that obesity may also be related to compromised immune function due to altered metabolic, psychological, and physical attributes (93). The aim of this study was to compare: a) immunity-related variables such as frequency of upper respiratory tract infections (URTI) and salivary secretory immunoglobulin A (sIgA) levels between overweight/obese (OB) and normal weight (NW) early-pubertal and late-pubertal girls, and b) stress-related variables such as Cortisol, melatonin, the melatonin/cortisol ratio, testosterone and the testosterone/cortisol ratio. Physical activity levels, stress indicators, and fatigue were used to explain potential differences in the dependent variables. It was hypothesized that the OB females would have lower melatonin (M) and higher Cortisol (C) and testosterone (T) levels compared with NW girls, regardless of maturity status. The altered levels of melatonin, Cortisol, and testosterone, would result in decreased M/C and T/C ratios, despite the increase in testosterone in OB females. It was hypothesized that this altered hormonal status results in a compromised immunity marked by higher frequency of upper respiratory tract infections (URTI) and decreased levels of secretory immunoglobulin A (sIgA). It was also hypothesized that OB girls would participate in less hours of physical activity than their NW counterparts and that this would relate to their stress and immunity levels. Forty (16 early- and 24 late-pubertal) overweight and obese females were compared to fifty-three (27 eariy- and 26 late-pubertal) age-matched normal-weight control subjects. Participants were categorized as early-pubertal (EP) or late-pubertal (LP) using Tanner self-staging of secondary sex characteristics. Subjects were classified into the two adiposity groups according to relative body fat (%BF), where normal weight (NW) subjects had a %BF less than 25%, and overweight and obese (OB) subjects had a %BF greater than 27.5%. Participants completed a number of questionnaires and information was collected on menstrual history, smoking history, alcohol and caffeine consumption, and medical history. Following the determination of maturity status, a complete anthropometric assessment was made including height, body mass, and body composition. All questionnaires and measurements were completed during a one-hour visit between 1 500 and 1900 hours Relative body fat was assessed using bioelectrical impedance analysis. Resting saliva samples were obtained and assayed (ELISA) for testosterone, Cortisol, melatonin and secretory immunoglobulin A. Physical activity was self-reported using the Godin- Shephard Leisure time questionnaire, and quantified using Actigraph GTIM accelerometers, which participants wore for seven consecutive days from the time they woke up in the morning, until the time they went to bed. Late-pubertal girls also completed questionnaires on their perceived stress and fatigue. Finally, all participants also filled out a one-month health log to record frequency of symptoms of upper respiratory tract infections (URTI). Significant age effects were found for testosterone, Cortisol, incidence of sickness, and sIgA when controlling for physical activity, however there were no significant effects of adiposity on any of the variables. There was a trend which neared-significance for an effect of adiposity on sIgA (p=0.01). There were no significant differences between the groups on the total selfreported leisure-time physical activity in METs per week, however EP girls recorded significantly greater levels of moderate, hard, and very hard physical activity from accelerometers. Results of the perceived stress and fatigue questionnaires in late-pubertal girls demonstrated that contrary to what was hypothesized, NW girls reported more stress and more fatigue than OB girls. Results of the present study suggest that excess adiposity in early- and latepubescent girls may not have a negative impact on immunity as hypothesized.

Low cost synthesis of cathode and anode materials for lithium-ion batteries

Dans cette thèse, nous démontrons des travaux sur la synthèse à faible coût des matériaux de cathode et l'anode pour les piles lithium-ion. Pour les cathodes, nous avons utilisé des précurseurs à faible coût pour préparer LiFePO4 et LiFe0.3Mn0.7PO4 en utilisant une méthode hydrothermale. Tout d'abord, des matériaux composites (LiFePO4/C) ont été synthétisés à partir d'un précurseur de Fe2O3 par une procédé hydrothermique pour faire LiFePO4(OH) dans une première étape suivie d'une calcination rapide pour le revêtement de carbone. Deuxièmement, LiFePO4 avec une bonne cristallinité et une grande pureté a été synthétisé en une seule étape, avec Fe2O3 par voie hydrothermale. Troisièmement, LiFe0.3Mn0.7PO4 a été préparé en utilisant Fe2O3 et MnO comme des précurseurs de bas coûts au sein d'une méthode hydrothermale synthétique. Pour les matériaux d'anode, nous avons nos efforts concentré sur un matériau d'anode à faible coût α-Fe2O3 avec deux types de synthèse hydrothermales, une a base de micro-ondes (MAH) l’autre plus conventionnelles (CH). La nouveauté de cette thèse est que pour la première fois le LiFePO4 a été préparé par une méthode hydrothermale en utilisant un précurseur Fe3+ (Fe2O3). Le Fe2O3 est un précurseur à faible coût et en combinant ses coûts avec les conditions de synthèse à basse température nous avons réalisé une réduction considérable des coûts de production pour le LiFePO4, menant ainsi à une meilleure commercialisation du LiFePO4 comme matériaux de cathode dans les piles lithium-ion. Par cette méthode de préparation, le LiFePO4/C procure une capacité de décharge et une stabilité de cycle accrue par rapport une synthétisation par la méthode à l'état solide pour les mêmes précurseurs Les résultats sont résumés dans deux articles qui ont été récemment soumis dans des revues scientifiques.

Nanostructures and energy conversion

The unique properties of nanostructures associated with their low dimensionality give rise to new opportunities for research on nanoscale heat transfer and energy conversion. Inspired by Majumdar’s analysis of the novel aspects of heat, mass, and charge flow across the interface between hard and soft materials, some perspectives about research frontiers in nanoscale heat transfer and energy conversion are provided.

Infrared filters and coatings for the High Resolution Dynamics Limb Sounder (6-18µm)

This paper describes the spectral design and manufacture of the narrow bandpass filters and 6-18µm broadband antireflection coatings for the 21-channel NASA EOS-AURA High Resolution Dynamics Limb Sounder (HIRDLS). A method of combining the measured spectral characteristics of each filter and antireflection coating, together with the spectral response of the other optical elements in the instrument to obtain a predicted system throughput response is presented. The design methods used to define the filter and coating spectral requirements, choice of filter materials, multilayer designs and deposition techniques are discussed.

Anxious adults vs cool children: children's view on smoking and addiction

Tobacco addiction represents a major public health problem, and most addicted smokers take up the habit during adolescence. We need to know why. With the aim of gaining a better understanding of the meanings smoking and tobacco addiction hold for young people, 85 focused interviews were conducted with adolescent children from economically deprived areas of Northern Ireland. Through adopting a qualitative approach within the community rather than the school context, the adolescent children were given the opportunity to freely express their views in confidence. Children seem to differentiate conceptually between child smoking and adult smoking. Whereas adults smoke to cope with life and are thus perceived by children as lacking control over their consumption, child smoking is motivated by attempts to achieve the status of cool and hard, and to gain group membership. Adults have personal reasons for smoking, while child smoking is profoundly social. Adults are perceived as dependent on nicotine, and addiction is at the core of the children's understanding of adult smoking. Child smoking, on the other hand, is seen as oriented around social relations so that addiction is less relevant. These ideas leave young people vulnerable to nicotine addiction. It is clearly important that health promotion efforts seek to understand and take into account the actions of children within the context of their own world-view to secure their health

Artisanal mining's democratizing directions and deviations

Artisanal miners have tended to be portrayed in the literature and media as people who work hard and play hard, not infrequently depicted as ‘rough diamonds’ likely to cross the boundaries of appropriate behaviour through pursuit of wealth and flamboyant living, often at the cost of local environmental damage. A popular alternative image is that of marginalised labourers, driven by poverty to toil in harsh conditions and pursuing mining livelihoods in the face of national governments and large-scale mining companies’ subversion of their land and mineral rights. Both views reflect partial realities, but are inclined to exaggerate the position of miners as mischief-making rogues or victims. Through documentation of the multi-faceted nature of Tanzanian artisanal miners’ work and home lives during the country’s on-going economic mineralisation, we endeavour to convey a balanced rendering of their aspirations, occupational identity and social ties. Our emphasis is on their working lives as artisans, how they organise themselves and contend with the risks of their occupation, including their engagement with government policy and large-scale mining interests.

Consumer acceptability and sensory profile of cooked broccoli with mustard seeds added to improve chemoprotective properties

Broccoli, a rich source of glucosinolates, is a commonly consumed vegetable of the Brassica family. Hydrolysis products of glucosinolates, isothiocyanates, have been associated with health benefits and contribute to the flavour of Brassica. However, boiling broccoli causes the myrosinase enzyme needed for hydrolysis to denature. In order to ensure hydrolysis, broccoli must either be mildly cooked or active sources of myrosinase, such as mustard seed powder, can be added post-cooking. In this study, samples of broccoli were prepared in six different ways; standard boiling with and without mustard seeds, sous-vide cooking at low temperature (70 °C) and sous-vide cooking at higher temperature (100 ºC) without mustard and with mustard at two different concentrations. The majority of consumers disliked the mildly cooked broccoli samples (70 ºC, 12 min, sous-vide) which had a hard and stringy texture. The highest mean consumer liking was for standard boiled samples (100 ºC, 7 min). Addition of 1% mustard seed powder developed sensory attributes such as pungency, burning sensation, mustard odour and flavour. One cluster of consumers (32%) found mustard seeds to be a good complement to cooked broccoli, however, the majority disliked the mustard-derived sensory attributes. Where the mustard seeds were partially processed, doubling the addition to 2% led to only the same level of mustard flavour and pungency as 1% unprocessed seeds, and mean consumer liking remained unaltered. This suggests that optimisation of the addition level of partially processed mustard seeds may be a route to enhance bioactivity of cooked broccoli without compromising consumer acceptability.

Enteric coated spheres produced by extrusion/spheronization provide effective gastric protection and efficient release of live therapeutic bacteria

We present a novel but simple enteric coated sphere formulation containing probiotic bacteria (Lactobacillus casei). Oral delivery of live bacterial cells (LBC) requires live cells to survive firstly manufacturing processes and secondly GI microbicidal defenses including gastric acid. We incorporated live L. casei directly in the granulation liquid, followed by granulation, extrusion, spheronization, drying and spray coating to produce dried live probiotic spheres. A blend of MCC, calcium-crosslinked alginate, and lactose was developed that gave improved live cell survival during manufacturing, and gave excellent protection from gastric acid plus rapid release in intestinal conditions. No significant loss of viability was observed in all steps except drying, which resulted in approximately 1 log loss of viable cells. Eudragit coating was used to protect dried live cells from acid, and microcrystalline cellulose (MCC) was combined with sodium alginate to achieve efficient sphere disintegration leading to rapid and complete bacterial cell release in intestinal conditions. Viability and release of L. casei was evaluated in vitro in simulated GI conditions. Uncoated spheres gave partial acid protection, but enteric coated spheres effectively protected dried probiotic LBC from acid for 2 h, and subsequently released all viable cells within 1h of transfer into simulated intestinal fluid.