Estudo da aplicação de adesivos de cura UV em conservação e restauro de vidro e vitral

Do presente trabalho resultou a submissão de um artigo, com o título UV Curing Adhesives for Conservation of Glass- Chemical and Mechanical Stability, para comunicação oral em conferência internacional intitulada Recent Advances in Glass and Ceramics Conservation, a ocorrer em Wroclaw, Polónia, de 25 a 29 de Maio de 2016, no âmbito do ICOM-CC Glass and Ceramics Working Group Interim Meeting.

Optimization of production of anti-cancer vaccines based on dendritic cells

Cancer remains as one of the top killing diseases in first world countries. It’s not a single, but a set of various diseases for which different treatment approaches have been taken over the years. Cancer immunotherapy comes as a “new” breath on cancer treatment, taking use of the patients’ immune system to induce anti-cancer responses. Dendritic Cell (DC) vaccines use the extraordinary capacity of DCs’ antigen presentation so that specific T cell responses may be generated against cancer. In this work, we report the ex vivo generation of DCs from precursors isolated from clinical-grade cryopreserved umbilical cord blood (UCB) samples. After the thawing protocol for cryopreserved samples was optimized, the generation of DCs from CD14+ monocytes, i.e., moDCs, or CD34+ hematopoietic stem cells (HSCs), i.e, CD34-derived DCs, was followed and their phenotype and function evaluated. Functional testing included the ability to respond to maturation stimuli (including enzymatic removal of surface sialic acids), Ovalbumin-FITC endocytic capacity, cytokine secretion and T cell priming ability. In order to evaluate the feasibility of using DCs derived from UCB precursors to induce immune responses, they were compared to peripheral blood (PB) moDCs. We observed an increased endocytosis capacity after moDCs were differentiated from monocyte precursors, but almost 10-fold lower than that of PB moDCs. Maturation markers were absent, low levels of inflammatory cytokines were seen and T cell stimulatory capacity was reduced. Sialidase enzymatic treatment was able to mature these cells, diminishing endocytosis and promoting higher T cell stimulation. CD34-derived DCs showed higher capacity for both maturation and endocytic capacity than moDCs. Although much more information was acquired from moDCs than from CD34-derived DCs, we conclude the last as probably the best suited for generating an immune response against cancer, but of course much more research has to be performed.

Molecular targeting of proteins by homocysteine: implications in familial and clinical hypercholesterolemia

Cardiovascular diseases (CVDs) are one of the leading causes of death and disability worldwide and one of its underlying causes is hypercholesterolemia. Hypercholesterolemia can have genetic (familial hypercholesterolemia, FH) and non-genetic causes (clinical hypercholesterolemia, CH), the first much more severe, with occurrence of premature atherosclerosis. While the pathophysiological role of homocysteine (Hcy) on CVD is still controversial, molecular targeting of protein by S and N-homocysteinylation offers a new paradigm to be considered in the vascular pathogenesis of hypercholesterolemia. On this regard, the present study aims to give new insights on protein targeting by Hcy in both CH and FH conditions. A total of 187 subjects were included: 65 normolipidemic and 122 hypercholesterolemic. Total (tHcy) and free (fHcy) fractions were quantified in serum samples after validation of an HPLCFD method, to assess S-homocysteinylation. Also, the lactonase (LACase) activity of paraoxonase-1 (PON1) was quantified by a colorimetric assay, as a surrogate of N-homocysteinylation. tHcy does not differ among groups. Nevertheless, fHcy declines in the hypercholesterolemic groups, with more evidence to the FH population. Consequently, there seems to be an increase of Shomocysteinylation, regardless of lipid lowering therapy (LLT). Also, despite of LLT use, LACase activity is lower in FH, thus the risk for protein N-homocysteinylation seems to be higher. Moreover, the decrease in LACase/ApoA1 and LACase/HDL ratios in FH, shows that HDL is dysfunctional in this population, despite its normal concentration values. Data supports that the pathophysiological role of Hcy on hypercholesterolemia may reside in its ability to post-translationally modify proteins. This role is particularly evident in FH condition. In the future, it will be interesting to identify which target proteins are modified and thus involved in vascular pathology progression.

Cerebral vasculopathy in children with sickle cell disease A study of genetic modulators of the disease

Sickle cell disease (SCD) is a genetic disorder with recessive transmission, caused by the mutation HBB:c.20A>T. It originates hemoglobin S that forms polymers inside the erythrocyte, upon deoxygenation, deforming it and ultimately leading to premature hemolysis. The disease presents with high heterogeneity of clinical manifestations, the most devastating of which, ischemic stroke, occurs in 11% of patients until 20 years of age. In this study, we tried to identify genetic modifiers of risk and episodes of stroke by studying 66 children with SCD, grouped according to the degree of cerebral vasculopathy (Stroke, Risk and Control). Association studies were performed between the three phenotypic groups and hematological and biochemical parameters of patients, as well as with 23 polymorphic regions in genes related to vascular cell adhesion (VCAM-1, THBS-1 and CD36), vascular tonus (NOS3 and ET-1) and inflammation (TNF-α and HMOX-1). Relevant data was collected from patient’s medical records. Known genetic modulators of SCD (beta-globin cluster haplotype and HBA and BCL11A genotypes) and putative genetic modifiers of cerebral vasculopathy were characterized. Differences in their distribution among groups were assessed. VCAM-1 rs1409419 allele C and NOS3 rs207044 allele C were associated to stroke events, while VCAM-1 rs1409419 allele T was found to be protective. Alleles 4a and 4b of NOS3 27 bp VNTR appeared to be respectively associated to stroke risk and protection. HMOX-1 longer STRs seemed to predispose to stroke. Higher hemoglobin F levels were found in Control group, as a result of Senegal haplotype or of BCL11A rs11886868 allele T, and higher lactate dehydrogenase levels, marker of hemolysis, were found in Risk group. Molecular mechanisms underlying the modifier functions of the relevant genetic variants are discussed.

Modelação estocástica do depósito mineral do Zambujal (Mina de Neves-Corvo): contribuição da densidade como indicador morfológico

Este estudo tem como objetivo construir um modelo estocástico de alta resolução da morfologia e dos teores em metal, do depósito mineral do Zambujal, Mina de Neves-Corvo. O depósito do Zambujal é um corpo vulcanogénico que se localiza no setor Português, na parte mais a Sul da Faixa Piritosa Ibérica, com sulfuretos maciços no topo e fissurais na base. Para construir um modelo estocástico deste depósito, onde os teores em metal evidenciam zonamento, é importante ter em conta a proporção local de sulfuretos na matriz rochosa. Como esta variável não é quantificada em laboratório, propõe-se a utilização da densidade das amostras como um indicador indireto da proporção de minérios na matriz rochosa. Conhecida esta variável, a modelação dos teores em metal pode ser feita para os chamados teores relativos (teores em metal na fração de sulfuretos). As principais etapas da metodologia proposta são: (a) para cada amostra analisada no laboratório, estimação de soluções para a variável proporção de sulfuretos na matriz rochosa ????(????), tendo em conta a paragénese principal do depósito, os teores e a densidade da rocha; (b) construção de um modelo morfológico 3D de baixa resolução com duas regiões, minérios maciços e minérios fissurais, por digitalização de limites em perfis, interpolação de superfícies e conversão para o modelo de blocos do depósito; (c) construção de um modelo morfológico 3D de alta resolução para todo o depósito da variável ????(????) por Simulação Sequencial Direta (SSD), tendo como informação condicionante os histogramas regionais de ????(????) para minérios maciços e minérios fissurais e as soluções obtidas em (a) para ????(????) na localização das sondagens; (d) SSD dos teores relativos em cobre, zinco e prata; (e) discussão dos resultados e quantificação de recursos. Os resultados foram validados por comparação com os equivalentes obtidos numa estimação por krigagem normal dos teores em metal e mostraram ser da mesma ordem de grandeza. O conjunto de imagens simuladas das variáveis ????(????) e teores permite quantificar a incerteza do conhecimento do depósito relativamente à informação disponível.

Efeito de background local e assinatura geoquímica de anomalias naturais em sedimentos de corrente e solos – aplicação à área envolvente do jazigo de urânio (Nisa, Portugal)

Na região de Nisa, concelho de Portalegre, situa-se um dos maiores e mais relevantes jazigos de urânio alguma vez descoberto em território nacional. Trata-se de um jazigo ainda inexplorado que encerra um potencial estimado em cerca de 32 milhões de toneladas de minério tal qual. Este jazigo ocorre à superfície e encontra-se em contexto metassedimentar embutido em xistos mosqueados, pertencentes ao Grupo das Beiras, nas proximidades do contacto com o granito do Maciço de Nisa. Este trabalho tem como objetivo estudar de forma qualitativa e quantitativa a dispersão geoquímica provocada por processos naturais de erosão e de transporte hidrogravítico na envolvente à anomalia geoquímica natural localmente induzida por este jazigo. Para o efeito estabeleceu-se uma metodologia com as seguintes etapas principais: (1) georreferenciação em SIG de elementos de cartografia; (2) planeamento e elaboração do plano de amostragem; (3) recolha e tratamento de amostras de solos e sedimentos; (4) ensaios não destrutivos de medição de radiação gama por SPP2 e determinações analíticas por XRF; (5) análise exploratória e tratamento estatístico de dados e análise espacial; (6) análise de resultados; (7) definição de teores geoquímicos de fundo local. As amostras de sedimentos foram retiradas de uma ribeira que intersecta a área da anomalia e alimenta uma barragem local de enrocamento; as amostras de solos foram retiradas de linhas de amostragem perpendiculares à ribeira. As determinações analíticas registaram os teores em diversos metais, como o urânio, crómio, molibdénio, nióbio, vanádio e zinco e do semimetal arsénio. Com exceção do zinco, os resultados evidenciam que as concentrações naturais nestes metais no local onde se localiza uma importante jazida de minérios de urânio são muito elevados, e quando comparados com os valores standard da norma Canadiana mostram poder existir risco para a saúde se não forem limitados os usos do local.

Modelo hidrogeológico e rede de monitorização da água subterrânea na Zona Industrial e Logística de Sines (ZILS)

Na Zona Industrial e Logística de Sines (ZILS) estão instaladas empresas e indústrias que interferem na quantidade e qualidade da água subterrânea de aquíferos da região. Estas utilizam e libertam poluentes que, consequentemente, quando não cumpridas as normas de segurança, podem causar impactes no ambiente. A ZILS situa-se no Sistema Aquífero de Sines, na Massa de Água 032-Sines, este é constituído por dois aquíferos, um superficial detrítico livre e outro carbonatado profundo confinado. Apesar de se encontrarem separados em grande parte da sua extensão, na região sul, estes aquíferos encontram-se em conexão hidráulica. Esta ocorre a este da falha da Maria das Moitas onde, a partir da qual e até ao limite com o Paleozóico, não foi reconhecida a unidade argilosa do Miocénico, aumentado assim a vulnerabilidade do sistema e a pertinente otimização da rede de monitorização. Para a realização de um estudo mais aprofundado e avaliação dos efeitos sobre as águas subterrâneas na área de estudo, definiu-se uma metodologia de trabalho que engloba 4 etapas: (i) revisão bibliográfica; (ii) recolha de dados geológicos e hidrogeológicos dos arquivos da aicep Global Parques, S.A., SNIRH e LNEG; (iii) tratamento e análise dos dados obtidos em ArcGIS e traçado de perfis geológicos interpretativos; (iv) realização do modelo geológico e hidrogeológico e respetiva adequação da rede de monitorização. O modelo hidrogeológico concebido mostra que o escoamento no Sistema Aquífero de Sines se processa, predominantemente, de E para W a partir do limite situado no contacto por falha entre as unidades do Paleozóico e Meso-Cenozóico com orientação, quase perpendicular, à ribeira dos Moinhos. A este deste alinhamento é assinalada a presença de um aquífero fissurado sob as areias do Plio-Plistocénico localizado na Formação de Mira. O escoamento neste aquífero faz-se de NE para SW, em direção ao oceano, para a praia de S. Torpes.

Potencial do Sienito Nefelínico de Monchique para incorporação na indústria cerâmica

A procura de novos materiais aumenta dia após dia, obrigando o Homem a procurar e encontrar novas soluções, tendo sempre como critério decisivo, uma exploração económica e ambiental sustentável. É neste âmbito que surge o tema desta dissertação. O objetivo é tirar um maior proveito do sienito nefelínico de Monchique (Portugal), à semelhança de países como a Rússia, Canadá e Noruega, que utilizam esta rocha a nível industrial. Neste trabalho, a investigação foi no sentido de estudar o potencial da rocha portuguesa para a indústria cerâmica. O elevado teor de alumina e álcalis que o sienito nefelínico apresenta na sua constituição, serve de substituto aos minerais atualmente utilizados neste sector, os feldspatos isolados. A alumina serve de estabilizador, promovendo a durabilidade dos materiais pelo aumento da resistência e o conteúdo em álcalis funciona como fundente, diminuindo a temperatura de queima. Desta forma, o Maciço de Monchique ganha uma nova importância económica, sendo uma mais-valia para o país. Para tal, elaboraram-se provetes cerâmicos constituídos por 0, 20, 40 e 60% em peso de sienito nefelínico em mistura com argila. Posteriormente, sujeitaram-se os provetes a três temperaturas diferentes, 900 °C, 1000 °C e 1100 °C e submeteram-se cada um deles a ensaios físicos e mecânicos, para determinar o potencial da incorporação do sienito de Monchique na indústria cerâmica. Os resultados indicaram que a adição de sienito nefelínico melhora as propriedades físicas da argila. Relativamente às propriedades mecânicas, o ensaio de resistência à flexão indicou que, dos vários teores testados, o mais positivo encontra-se na percentagem de 20% de sienito nefelínico, apresentando valores próximos da argila pura utilizada como referência.

Nanomedicines, a strategy to evade multidrug resistance

Multidrug resistance is a major problems associated with cancer chemotherapy. Efflux transports is one of the numerous mechanisms involved in multidrug resistance. P-glycoprotein is a transmembrane protein, responsible for drug efflux, which decreases drugs intracellular bioavailability, consequently decreasing their efficacy against cancer. Cancer growth and dissemination depends on the expression of transcriptional factors such as, Twist. Among other features, this protein is related with cells chemoresistance possible by regulation of multidrug resistance pathways including the P-glycoprotein expression. The herein study proposes to demonstrate if paclitaxel entrapped nanoparticles is an effective system in evading multidrug resistance mechanisms and if functionalization of a specific antibody against cancer stem cells receptors (anti-CD44v6) has the capability to target selectively these cells increasing nanoparticles efficacy. Therefore solid lipid nanoparticles were prepared and a breast cancer cell line (MDA-MB-436) was exposed to them in order to assess unloaded nanoparticles cytotoxic effects, increased pharmacologic efficacy of loaded nanoparticles relative to the free drug and their ability to evade multidrug resistance. The proposed solid lipid nanoparticles system proved to be capable of efficiently evading multidrug resistance mechanisms; however no improvement was added when these nanoparticles were functionalized with the antibody in the in vitro studies. However, the nanoparticles system is effective against multidrug resistance mechanisms.

Study of in vivo interactions between penicillin-binding proteins of Staphylococcus aureus

Staphylococcus aureus (S. aureus) is a major human pathogen that has acquired resistance to practically all classes of β-lactam antibiotics, being responsible of Multidrug resistant S. aureus (MRSA) associated infections both in healthcare (HA-MRSA) and community settings (CA-MRSA). The emergence of laboratory strains with high-resistance (VRSA) to the last resort antibiotic, vancomycin, is a warning of what is to come in clinical strains. Penicillin binding proteins (PBPs) target β-lactams and are responsible for catalyzing the last steps of synthesis of the main component of cell wall, peptidoglycan. As in Escherichia coli, it is suggested that S. aureus uses a multi-protein complex that carries out cell wall synthesis. In the presence of β-lactams, PBP2A and PBP2 perform a joint action to build the cell wall and allow cell survival. Likewise, PBP2 cooperates with PBP4 in cell wall cross-linking. However, an actual interaction between PBP2 and PBP4 and the location of such interaction has not yet been determined. Therefore, investigation of the existence of a PBP2-PBP4 interaction and its location(s) in vivo is of great interest, as it should provide new insights into the function of the cell wall synthesis machinery in S. aureus. The aim of this work was to develop Split-GFPP7 system to determine interactions between PBP2 and PBP4. GFPP7 was split in a strategic site and fused to proteins of interest. When each GFPP7 fragment, fused to proteins, was expressed alone in staphylococcal cells, no fluorescence was detectable. When GFPP7 fragments fused to different peptidoglycan synthesis (PBP2 and PBP4) or cell division (FtsZ and EzrA) proteins were co-expressed together, fluorescent fusions were localized to the septum. However, further analysis revealed that this positive result is mediated by GFPP7 self-association. We then interpret the results in light of such event and provide insights into ways of improving this system.

Historical reconstructions of raw materials based on a blue smalt coating applied to a seventeenth-century altarpiece

Based on samples cross-sections from the Main Altarpiece of the Coimbra Old Cathedral, where a blue coating performed in 1685 is observed (that was partly covered with a Prussian blue-containing overpaint), the raw materials present in this coating were reproduced and studied. Blue areas were painted with smalt in oil, according to the contract signed by Manoel da Costa Pereira in 1684 and the analysis by Le Gac in 2009. Based on these, three batches of cobalt-based glasses (S1, S2 and S3) were heated and melted in alumina crucibles in the kiln. S1 contained 6.03 % of cobalt oxide, S2 contained 2.10 %, with the addition of 1.49 % of magnesium oxide, and S3 contained 6.82 % of cobalt oxide, with the addition of 4.63% of antimony trioxide. These batches were ground mechanically with water and manually with different vehicles stated in recipes. The results were studied by means of OM, SEM-EDS, X-Ray CT, Colorimetry and Vickers HT. Different binders were also produced and analyzed by means of μ-FTIR, in order to perform their characterization and obtain Standard Spectra. Since anhydrite was identified in the ground layers, gypsum from Óbidos was also characterized by XRD. The main goal of this thesis was to study all the raw materials present in the 1685-blue coating, in order to allow the historically accurate reconstruction of the layers build-up in the next future.

Geopolymers as infill material for conservation of azulejos

The restoration materials currently used to fill gaps in architectural historical azulejos (e.g. lime or organic resin pastes) usually show serious drawbacks in terms of compatibility, effectiveness and durability. The existing solutions do not fully protect azulejos in outdoor conditions and frequently result in further deterioration. Geopolymers can be a potential solution for azulejo lacunae infill given the chemical-mineralogical similitude to the ceramic body, and also the durability and versatile range of physical properties that can be obtained through the manipulation of their formulation and curing conditions. This work presents and discusses the viability of the use of geopolymeric pastes to fill lacunae in azulejos or to act as “cold” cast ceramic tile surrogates reproducing missing azulejo fragments. The formulation of geopolymers, namely the type of activators, the aluminosilicate source, the amount of water (to meet adequate workability requirements) and curing conditions were studied. The need for post-curing desalination was also considered envisaging their application in the restoration of outdoor architectural historical azulejos frequently exposed to adverse environmental conditions. The possible advantages and disadvantages of the use of geopolymers in the conservation of azulejos are also discussed. Several techniques were used to study the chemical and physical behavior of geopolymers, namely FT-IR, XRD, MIP, SEM-EDS, WDXRF, electrical conductivity, open porosity, bending strength, adhesion strength, water vapour permeability, thermal expansion and hydric expansion. The results indicate that geopolymers are a promising material for restoration of azulejos, exhibiting some properties, such as adhesion to the ceramic substrate, higher than inorganic materials used nowadays, such as aerial lime based pastes.

Estudo da dessalinização de objetos arqueológicos de liga ferrosa por imersão em sulfito alcalino

A dessalinização é de extrema importância para a estabilização de objetos arqueológicos ferrosos contaminados por sais, principalmente quando estes envolvem cloretos, dado desencadearem um significativo aumento na sua velocidade da corrosão. Este processo de degradação pode resultar em destacamentos importantes no objeto (com perda de informação sobre a sua superfície) ou mesmo numa perda total do seu núcleo metálico. De entre os processos de dessalinização, o método do sulfito alcalino é dos mais praticados, exatamente por ser eficaz na remoção de cloretos, de baixo custo de implementação e de relativa fácil aplicação, ao contrário de outros métodos também igualmente eficazes. Até ao momento não existe no laboratório de metais do Departamento de Conservação e Restauro da Faculdade de Ciências e Tecnologia um processo eficaz de dessalinização para objetos arqueológicos à base de ferro contaminados com cloretos, estando este tipo de intervenção também ausente em muitos laboratórios de conservação que lidam com este tipo de materiais. Assim, através de um estudo e experimentação do método do sulfito alcalino, pretendeu-se adquirir alguma prática neste processo de dessalinização, implementá-lo no laboratório (construção de protótipo(s)) a custos acessíveis e, paralelemente, testar a sua eficácia.

Analysis and Treatment of a male portrait in oil and a study of the size layer with reconstructions from Vibert’s recipe (1892)

This thesis project concentrated on both the study and treatment of an early 20th century male portrait in oil from Colecção Caixa Geral de Depósitos, Lisbon, Portugal. The portrait of Januário Correia de Almeida, exhibits a tear (approximately 4.0 cm by 2.3 cm) associated with paint loss on the right upper side, where it is possible to observe an unusually thick size layer (approximately 50 microns) and an open weave mesh canvas. Size layers made from animal glue remain subject to severe dimensional changes due to changes in relative humidity (RH), thereby affecting the stability of the painting. In this case, the response to moisture of the size layer is minimal and the painting is largely uncracked with very little active flaking. This suggests that the size layer has undergone pre-treatment to render it unresponsive to moisture or water. Reconstructions based on late nineteenth century recipes using historically appropriate materials are used to explore various options for modifying the characteristics of gelatine, some of which may relate to the Portrait’s size layer. The thesis is separated into two parts: Part 1: Describes the history, condition, materials and techniques of the painting. It also details the treatment of Januário Correia de Almeida as well as the choices made and problems encountered during the treatment. Part 2: Discusses the history of commercial gelatine production, the choice of the appropriate animal source to extract the collagen to produce reconstructions of the portrait’s size layer as well as the characterization of selected reconstructions. The execution of a shallow textured infill led to one publication and one presentation: Abstract accepted for presentation and publication, International Meeting on Retouching of Cultural Heritage (RECH3), Francisco Brites, Leslie Carlyle and Raquel Marques, ‘’Hand building a Low Profile Textured Fill for a Large Loss’’.