Software Licensing: Implementing Electronic Licensing in Medical Technology Company

The purpose of this thesis is to examine software licensing, how a software developer can benefit from it and to define specifications for licensing system of software based medical technology product. The thesis has been divided into theoretical and empirical parts. In the theoretical part the concept of software licensing and different aspects that are connected to it are examined with a help of research material. On the ground of this research, in the empirical part, a licensing system for a medical software product called iCentral is designed. The empirical part is based on interviews, questionnaire and on authors own experience gained while working for the case-company.The thesis has great practical importance for the case-company by proposing both an ideal, and more importantly, practical implementation for a licensing system of a product. Thesis shows that electronic licensing is a viable option to sell medical technology products without a need to revise existing procedures or the enterprise resource system in the case company.

Tuotantofilosofiat

Työssä esitellään käytetyimpiä tuotantofilosofioita. Tuotantofilosofia on hyvin laaja käsite ja sen vuoksi myös jotkin esiteltävistä menetelmistä ovat hyvin kaukana toisistaan. Työ koostuu teoriaosiosta, jossa on esitelty kukin tuotantofilosofia ja lopuksi johtopäätöksiä-osiossa käsitellään sitä, kuinka menetelmät liittyvät toisiinsa. Työssä esitellään JIT/JOT-tuotanto, Lean-tuotanto, Monozukuri, Modulointi, Standardointi, Strategiatyö, Six Sigma, TQM, TPM, QFD, MFD, Simulointi, Digitaalinen valmistus, DFX ja ns. uudet tuotantofilosofiat. Eri menetelmistä löytyvää lähdemateriaalia on tarjolla monipuolisesti, josta johtuen menetelmistä on voitu esitellä vain pääpiirteet. Tuotantofilosofioiden avulla voidaan saavuttaa monia eri asioita. Osa menetelmistä on luotu tuotannon tehostamiseksi ja yksinkertaistamiseksi, osa puolestaan lisää tuotannon tai koko yrityksen laatutasoa ja osa puolestaan helpottaa tuotteiden suunnittelu-työtä. Moni esiteltävistä filosofioista ei istu yksinomaan yhteen edellä mainituista kategorioista vaan kattaa laajempia alueita pitäen sisällään jopa kaikkia kolmea mainittua tulosta. Näiden lisäksi työssä on esitelty lyhyesti uusia tuotantofilosofioita, jotka ovat hieman irrallisia kokonaisuuksia verrattuna muihin työssä esiteltäviin filosofioihin. Työn tarkoituksena on auttaa hahmottamaan suurta kokonaisuutta jonka tuotantofilosofiat tuottavat. On tärkeää osata hahmottaa filosofioiden riippuvuus toisistaan ja se, että otettaessa käyttöön jotain tuotantofilosofiaa, tarkoittaa se myös mahdollisesti monen muunkin asian huomioonottamista. Tätä näkökantaa selvennetään johtopäätöksissä.

Distribution development in global business environment

The purpose of this master’s thesis was to analyze a case company’s distribution and its elements. With different distribution structure options a customer can be served with different ways. However, cost elements and service elements create different trade-offs. In this work the case company’s distribution’s present state was analyzed and conclusions were made. Based on these conclusions different alternatives for distribution were created. These different alternatives were analyzed through simulations and with more traditional calculations to compose the total operative costs of each alternative. Also other aspects were considered, such as required organizational changes and the possible better customer service. With the suggested 3-stock distribution structure shorter delivery times and possibly more punctual deliveries for products kept in stock could be achieved with the same operative costs as in current direct delivery model. Also, similar benefits could be achieved with other products with the 3-stock model.

ZigBee-verkot ja evaluointilaitteen suunnittelu

In this thesis a closer look at ZigBee wireless network protocol was made and a ZigBee evaluation device was designed and built for testing it. ZigBee is a digital wireless network technology published in 2004, which was developed for wireless control and automation systems. It is based on the IEEE 802.15.4-2003 standard, and its aim was to create a reliable wireless networking protocol with secure data transmissions, low power consumption and low manufacturing costs. The low power consumption requirement has also led to a slow data rate and a short range, but in a ZigBee network individual network devices can route messages to each other, so short range is not a problem. In automation and control systems a fast data rate is not usually an important requirement either. ZigBee network can form automatically and one ZigBee network can theoretically include thousands of devices, all of which can communicate with each other. ZigBee network is also self-healing, so an individual device dropping out of the network, like breaking down, does not affect functionality of the network. Evaluation device was designed and implemented in four different versions, which were tested with six different antenna designs. All antennas were tested at a range of 100 meters in an open terrain using two different frequencies and transmission powers. Also a range test was performed for selected antennas using transmission power of 4,5 dBm, which was maximum power of the ZigBee chip used in the evaluation device. Range test resulted in a measured range of several hundred meters, which can be considered as a good result for a short-range technology.

Utilization of Automatic Meter Reading in the Improvement of a District Heating System

A district heating system comprises production facilities, a distribution network, and heat consumers. The utilization of new energy metering and reading system (AMR) is increasing constantly in district heating systems. This heuristic study shows how the AMR system can be exploited in finding optimization opportunities in district heating system. In this study, the district heating system is mainly considered from the viewpoint of operational optimization. The focus is on the core processes, heat production and distribution. Three objectives were set to this study. The first one was to examine general optimization opportunities in district heating systems. Second, to figure out the benefits of AMR for general optimization opportunities. Finally, to define a methodology for process improvement endeavors. This study shows, through a case study, the usefulness of AMR in specifying current deficiencies in a district heating system. Based on a literature review, the methodology for the improvement of business processes is presented. Additionally, some issues related to future competitiveness of district heating are concerned. As a conclusion, some optimization objectives are considered more desirable than others. Study shows that AMR is useful in the specification of optimization targets in the district heating system. Further steps in optimization process were not examined in detail. That would seem to be interesting topic for further studies.

Asiakasliittymän tilannekatsaus

Esitys Oulun kirjastopäivillä 9.6.2011

Costs and Benefits of a Shared Digital Long-Term Preservation System

Paper presented at the 40th Annual Conference of LIBER (Ligue des Bibliothèques Européennes de Recherche - Association of European Research Libraries) on July 1st, 2011; with the slides used at the presentation.

Enterprise architecture – the foundation for a strategy

This artcle describes work done with enterprise architecture of the National Digital Library. The National Digital Library is an initiative of the Finnish Ministry of Education and Culture. Its purpose is to promote the availability of the digital information resources of archives, libraries and museums, and to develope the long-term preservation of digital cultural heritage materials. Enterprise architectures are a tool for strategic management and planning. An enterprise architecture also functions as an aid at a more practical level. It shows, for example, what kind of changes and improvements may be made in one system without overlap or conflict with other systems.

Digitoitavan aineiston elinkaaren hallinta

Esitys Lapin yleisten kirjastojen koulutustilaisuudessa.

KDK-asiakasliittymä 2. aallon keskustelu- ja tiedotustilaisuus 20.10.2011

Heli Kautosen esitys KDK:n asiakasliittymän 2. aallon keskustelu- ja tiedotustilaisuudessa 20.11.2011

KDK-hanke ja asiakasliittymäkonsortio

Tapani Sainion esitys KDK-asiakasliittymän 2. aallon keskustelu- ja tiedotustilaisuudessa 20.10.2011

KDK:n Asiakasliittymän Primon tilanne 20.10.2011

Ari Rouvarin esitys KDK-asiakasliittymän 2. aallon keskustelu- ja tiedotustilaisuudessa 20.10.2011