Three-phase current-source shunt active power filter with solar photovoltaic grid interface

This paper presents the proposal of a three phase current source shunt active power filter (CS-SAPF) with photovoltaic grid interface. The proposed system combines the compensation of reactive power and harmonics with the injection of energy from a solar photovoltaic array into the electrical power grid. The proposed equipment presents the advantage of giving good use to the current source inverter, even when the solar photovoltaic array is not producing energy. The paper describes the control system of the CS SAPF, the energy injection control strategy, and the current harmonics and power factor compensation strategy. Simulation results to assess the performance of the proposed system are also presented.

Producción in vitro de Embriones Bovinos Transgénicos mediante Inyección Intracitoplasmática de Espermatozoides (ICSI) con Enzimas de Restricción. In vitro Production of Transgenic Bovine Embryos using Intracitoplasmic Sperm Injection (ICSI) and Restriction Enzymes

La ingeniería genética y la reprogramación de organismos vivos representan las nuevas fronteras biotecnológicas que permitirán generar animales con modificaciones precisas en sus genomas para un sinnúmero de aplicaciones biomédicas y agropecuarias. Las técnicas para inducir modificaciones génicas intencionales en animales, especialmente en especies mayores de interés agropecuario, se encuentran rezagadas si se compara con los avances significativos que se han producido en el área de la transgénesis de roedores de laboratorio, especialmente el ratón. Es así que, el presente proyecto persigue desarrollar y optimizar protocolos para generar embriones bovinos transgénicos para aplicaciones biotecnológicas. La estrategia propuesta, se basa en conseguir la presencia simultánea en el interior celular de una enzima de restricción (I-SceI) más un transgén (formado por casetes de expresión de una proteína fluorescente -ZsGreen1- y neomicina fosfotransferasa). Específicamente, proyectamos estudiar una vía alternativa para generar embriones bovinos transgénicos mediante la incorporación del transgén (casetes ZsGreen1 y neo) flanqueado por sitios I-SceI más la enzima I-SceI al interior del ovocito junto con el espermatozoide durante la técnica conocida como inyección intracitoplasmática de espermatozoides (ICSI). Los embriones así generados se cultivarán in vitro, inspeccionándolos diariamente para detectar la emisión de fluorescencia, indicativa de la expresión de la proteína ZsGreen1. Los embriones que alcancen el estado de blastocisto y expresen el transgén se transferirán quirúrgicamente al útero de ovejas sincronizadas y se mantendrán durante 7 días. Al cabo de este período, los embriones se recolectarán quirúrgicamente del útero ovino y se transportarán al laboratorio para determinar el número de sitios de integración y número de copias del transgén mediante el análisis de su ADN por Southern blot. Se prevé que los resultados de esta investigación permitirán sentar las bases para el desarrollo de métodos eficientes para obtener modificaciones precisas en el genoma de los animales domésticos para futuras aplicaciones biotecnológicas. Genetic engineering and reprogrammed organisms represent the new biotechnological frontiers which will make possible to generate animals with precise genetic modifications for agricultural and biomedical applications. Current methods used to generate genetically modified large animals, lay behind those used in laboratory animals, specially the mouse. Therefore, we seek to develop and optimize protocols to produce transgenic bovine embryos through the use of a non-viral vector. The strategy involves the simultaneous presence inside the cell of a restriction enzyme (I-SceI) and a transgene (carrying cassettes for a fluorescent protein -ZsGreen1- and neomycin phosphotransferase) flanked by restriction sites for the endonuclease. We plan to develop an alternative approach to generate transgenic bovine embryos by coinjecting the transgene flanked by I-SceI restriction sites plus the enzyme I-SceI along with the spermatozoon during the technique known as intracytoplasmic sperm injection (ICSI). Embryos will be cultured in vitro and inspected daily with a fluorescence microscope to characterize transgene expression. Embryos that reach the blastocyst stage and express the transgene will be surgically transfer to the uterus of a synchronized ewe. After 7 days, the embryos will be flushed out the ovine uterus and transported to the laboratory to determine the number of integration sites and transgene copies by Southern blot. We anticipate that results from this research will set the stage for the development of efficient strategies to achieve precise genetic modifications in large domestic animals for future biotechnological applications.

Model analític de les característiques DC de transistors de doble porta

En aquest treball s’implementa un model analític de les característiques DC del MOSFET de doble porta (DG-MOSFET), basat en la solució de l’equació de Poisson i en la teoria de deriva-difussió[1]. El MOSFET de doble porta asimètric presenta una gran flexibilitat en el disseny de la tensió llindar i del corrent OFF. El model analític reprodueix les característiques DC del DG-MOSFET de canal llarg i és la base per construir models circuitals tipus SPICE.

The role of dentritic cells in leishmania infection : use of novel DC lines for the development of monoclonal antibodies

Les cellules dendritiques (DCs) sont des cellules multifonctionnelles qui font le lien entre le sytème immunitaire inné et adaptatif chez les mammifères. Il existe plusieurs sous-types de DCs basés sur leurs fonctions et l'endroit où elles se situent dans le corps. Dans le cadre de cette thèse, nous avons étudié le rôle de ces cellules face à une infection parasitaire. La Leishmania est un parasite causant une maladie appelée Leishmaniose, maladie endémique de l'Afrique, de l'Asie et de certaines régions de l'Amérique du Sud. Certaines espèces causent des lésions cutanées, alors que d'autres causent des lésions dans les muqueuses ou dans les organes internes. Le système immunitaire répond en générant une réponse inflammatoire qui élimine l'infection. Lors d'une réponse non-inflammatoire (de type cytokines, chemokines), cela va amener à une persistance du parasite sur le long terme. Les DC s'activant en présence du parasite dans la peau, vont le transporter vers un ganglion. A cet endroit, se trouvent différents sous-types de DC qui ont la particularité de présenter l'antigène (spécifique à la Leishmaniose) aux lymphocytes T, ce qui va alors amener à une réponse immunitaire puissante contre le parasite. Nous avons comparé différentes espèces de Leishmaniose dans leur façon d'activer les DC et différents modèles de souris ont été utilisé dans ce but-là. Les souris du type C57BL/6 sont connues pour être résistantes à L. major et sensibles à L. mexicana, alors qu'au contraire, les souris Balb/c sont connues pour être sensibles à ces deux espèces. En utilisant des parasites fluorescents transgéniques, nous avons comparé ces deux espèces de parasites (L. major et L. mexicana) en recherchant quelles cellules elles sont capables d'infecter in-vivo dans un modèle murin. Le rôle général des DC dans une infection à L. major a déjà été décrit. Dans notre étude, nous avons étudié le besoin en DC CD8a+ dans les ganglions afin d'engendrer une réponse face à une infection à L. major. Les souris qui n'ont pas ce sous-type de DC sont beaucoup plus sensibles à l'infection : elles ont des marqueurs inflammatoires plus bas et des lésions plus grandes. Nous avons également remarqué que les DC CD8a+ jouent un rôle crucial dans une phase plus avancée de l'infection. Dans notre laboratoire, nous avons la chance d'avoir une source illimitée de DCs de sous-type CD8a+ provenant d'une souris génétiquement modifiée par nos soin. Grâce à cela, nous avons utilisé ces cellules CD8a+ pour immuniser des rats afin de produire des anticorps monoclonaux ayant des propriétés spécifiques comme l'identification de protéines uniques présentes à la surface des DC et qui ensuite, modulent une réponse immunitaire in-vivo. Nous sommes actuellement en phase de caractérisation de plus de 750 hybridomes générés dans notre laboratoire. - Les cellules dendritiques (DCs) constituent le lien entre le système inné et adaptatif de la réponse immunitaire, car elles sont capables de présenter l'antigène, de donner la co- stimulation et de relâcher des cytokines et chimokines. Au cours de cette thèse, nous avons exploré différentes familles de DC lors d'infections parasitaires, telles que la Leishmaniose, parasite intracellulaire qui infecte les mammifères. La plupart des lésions cutanées résistantes sont caractérisées par une réponse pro-inflammatoire générée par l'IL-12. A l'inverse, pour la forme non résistante, la réponse est générée par l'IL-4 et l'IL-10, dans les modèles murins vulnérables. L'infection avec Lmajor a été caractérisée chez la souris C57BL/6 (Thl) et chez la souris Balb/c (Th2). Chez la souris C57BL/6 la lésion guérit, alors que chez la souris Balb/c, la lésion est au contraire non-cicatrisante. Nous avons comparé l'activation causée dans l'ensemble des DC par différentes espéces de Leishmania, et plus spécifiquement dans les DC CD8a+ présentes dans les ganglions lymphatiques et leur rôle dans la vulnérabilité à L. major. Ces cellules sont spécialisées dans la présentation croisée d'antigènes exogènes par le CMH-I et le haut taux de production d'IL-12 après activation. En utilisant des DC dérivées de moelle osseuse, nous avons constaté que L. guyanensis V+ (transportant un retrovirus) était le plus efficace pour l'activation des DC in-vitro comparé à L. major, L. mexicana et L. guyanensis (V-). Toutefois, in-vivo, les souris infectées avec L. major ont vu la taille de leur ganglions lymphatiques drainants augmentée, 3-6 semaines après l'infection dans les deux espèces de souris (les C57BL/6 résistantes et les Balb/c sensibles). En utilisant un parasite fluorescent transgénique, nous avons trouvé que les souris C57BL/6 sensibles à Lmexicana ont un nombre plus important de cellules Β infectées et un plus petit nombre de DC dérivées des monocytes inflammatoires, comparé au souris infectées avec L. major. Les conséquences de ces observations sont encore à l'étude. Des souris déficientes en CD8ct+DC et CD103+ sont plus sensibles à L. major que les souris WT: leurs lésions sont plus grandes et la charge parasitaire est plus importante. Nous avons généré une chimère de moelles osseuse CD11-DTR et Batf3-/- en mélangeant les moelles de ces deux souris, afin de déterminer le temps après infection où le manque de DC's CD8a+ contribue le plus à l'augmentation de la vulnérabilité chez la souris KO. Ces souris produisent plus d'IgG1 et IgE, font une réponse Th2 plus forte et Thl moins forte. Nous avons constaté que les souris déficientes en DC CD8a+ au début de la réponse immunitaire adaptive (trois semaines après injection) maintiennent un haut taux de lésions de grande taille, semblable à celui des souris chez qui les cellules ont été déplétées avant l'injection. Cela indique que les DC CD8a+ sont nécessaires pour l'efficacité de l'immunité dans la phase chronique de l'infection à L. major. Parallèlement à cela, nous avons aussi commencé une génération d'anticorps monoclonaux dirigés contre les DC CD8a+ activés en utilisant des souches établies dans notre laboratoire. En partant d'une librairie de 763 hybridomes, nous avons identifié plusieurs clones dignes d'intérêt avec une capacité fonctionnelle à moduler la prolifération et la sécrétion de cytokines des cellules T, ainsi que les molécules de co-stimulation présentes à la surface des DC activées elle-même. - Dendritic cells (DCs) are the bridge between the innate and the adaptive arms of the immune systems. They are professional antigen presentation cells and have important cytokine/chemokine release functions. In this dissertation we have focussed on the study of the different subsets of DCs in parasitic infection immunity. Leishmania are intra-cellular parasites of many different species that infect mammals. Most cutaneous lesions that are self- healing are characterized with a pro-inflammatory response with IL-12 while high levels of cytokines such as IL-4 and IL-10 characterized in susceptible mouse models. In mice L. major infection has been well characterized in C57BL/6 mice (Thl) that form healing lesions while Balb/c mice (Th2) form non-healing lesions. This thesis is focussed on comparing DC activation at large by different strains of Leishmania and more specifically, dLN resident CD8a+ DCs and their role in L. major susceptibility. This subset is specialized in cross- presentation of exogenous antigens in the MHC-I pathway and produce high levels of EL-12. Using bone marrow derived DCs we found that L. guyanensis V+ (carrying a retro-virus) was the most efficient at activating DCs in-vitro. In-vivo however L. major infected mice had the largest dLNs 3-6 weeks after infection in both genetically resistant C57BL/6 and susceptible Balb/c mice. Using transgenic fluorescent parasites, we found that C57BL/6 mice which are susceptible to L. mexicana had more number of infected Β cells and fewer number of infected inflammatory monocyte derived DCs in contrast to L. major infection. Using mice deficient in CD8a+ DCs, we found that these mice were more susceptible to L. major than their WT counterparts. They made larger lesions, had higher parasite burdens, higher levels of Th2 indicating immunolgloblins as measured by higher serie IgE levels and lower CD4+ IFNy+ cells. A mixed bone marrow chimera system of CDllc-DTR and Batf3~'~ was generated to determine the time point at which the lack of CD8a+ DCs most contributes to the increased susceptibility in KO mice. We found that mice depleted of CD8a+ DCs at the advent of the adaptive response (3 weeks after infection) maintained the significantly higher lesion size similar to mice whose cells were depleted from the onset of infection. This indicates that CD8a+ DCs are required for effective immunity in the chronic phase of L. major infection. We also began the generation of a valuable tool of monoclonal antibodies against activated CD8a+ DCs using our in-house DC line. From a library of 763 hybridomas we have identified several interesting clones with a functional ability to modulate Τ cell proliferation and cytokine secretion as well as down-modulating co-stimulatory molecules on activated DC cells themselves.

Bradykinin, but not muscarinic, inhibition of M-current in rat sympathetic ganglion neurons involves phospholipase C-β4

Rat superior cervical ganglion (SCG) neurons express low-threshold noninactivating M-type potassium channels (I-K(M)), which can be inhibited by activation of M-1 muscarinic receptors (M-1 mAChR) and bradykinin (BK) B-2 receptors. Inhibition by the M1 mAChR agonist oxotremorine methiodide (Oxo-M) is mediated, at least in part, by the pertussis toxin-insensitive G-protein G alpha (q) (Caulfield et al., 1994; Haley et al., 1998a), whereas BK inhibition involves G alpha (q) and/or G alpha (11) (Jones et al., 1995). G alpha (q) and G alpha (11) can stimulate phospholipase C-beta (PLC-beta), raising the possibility that PLC is involved in I-K(M) inhibition by Oxo-M and BK. RT-PCR and antibody staining confirmed the presence of PLC-beta1, - beta2, - beta3, and - beta4 in rat SCG. We have tested the role of two PLC isoforms (PLC-beta1 and PLC-beta4) using antisense-expression constructs. Antisense constructs, consisting of the cytomegalovirus promoter driving antisense cRNA corresponding to the 3'-untranslated regions of PLC-beta1 and PLC-beta4, were injected into the nucleus of dissociated SCG neurons. Injected cells showed reduced antibody staining for the relevant PLC-beta isoform when compared to uninjected cells 48 hr later. BK inhibition of I-K(M) was significantly reduced 48 hr after injection of the PLC-beta4, but not the PLC-beta1, antisense-encoding plasmid. Neither PLC-beta antisense altered M-1 mAChR inhibition by Oxo-M. These data support the conclusion of Cruzblanca et al. (1998) that BK, but not M-1 mAChR, inhibition of I-K(M) involves PLC and extends this finding by indicating that PLC-beta4 is involved.

Drug-eluting beads loaded with antiangiogenic agents for chemoembolization: in vitro sunitinib loading and release and in vivo pharmacokinetics in an animal model.

PURPOSE: The combination of embolic beads with a multitargeted tyrosine kinase inhibitor that inhibits tumor vessel growth is suggested as an alternative and improvement to the current standard doxorubicin-eluting beads for use in transarterial chemoembolization. This study demonstrates the in vitro loading and release kinetics of sunitinib using commercially available embolization microspheres and evaluates the in vitro biologic efficacy on cell cultures and the resulting in vivo pharmacokinetics profiles in an animal model. MATERIALS AND METHODS: DC Bead microspheres, 70-150 µm and 100-300 µm (Biocompatibles Ltd., Farnham, United Kingdom), were loaded by immersion in sunitinib solution. Drug release was measured in saline in a USP-approved flow-through apparatus and quantified by spectrophotometry. Activity after release was confirmed in cell culture. For pharmacokinetics and in vivo toxicity evaluation, New Zealand white rabbits received sunitinib either by intraarterial injection of 100-300 µm sized beads or per os. Plasma and liver tissue drug concentrations were assessed by liquid chromatography-tandem mass spectroscopy. RESULTS: Sunitinib loading on beads was close to complete and homogeneous. A total release of 80% in saline was measured, with similar fast-release profiles for both sphere sizes. After embolization, drug plasma levels remained below the therapeutic threshold (< 50 ng/mL), but high concentrations at 6 hours (14.9 µg/g) and 24 hours (3.4 µg/g) were found in the liver tissue. CONCLUSIONS: DC Bead microspheres of two sizes were efficiently loaded with sunitinib and displayed a fast and almost complete release in saline. High liver drug concentrations and low systemic levels indicated the potential of sunitinib-eluting beads for use in embolization.

Transscleral Coulomb-controlled iontophoresis of methylprednisolone into the rabbit eye: influence of duration of treatment, current intensity and drug concentration on ocular tissue and fluid levels.

The major problems associated with the use of corticosteroids for the treatment of ocular diseases are their poor intraocular penetration to the posterior segment when administered locally and their secondary side effects when given systemically. To circumvent these problems more efficient methods and techniques of local delivery are being developed. The purposes of this study were: (1) to investigate the pharmacokinetics of intraocular penetration of hemisuccinate methyl prednisolone (HMP) after its delivery using the transscleral Coulomb controlled iontophoresis (CCI) system applied to the eye or after intravenous (i.v.) injection in the rabbit, (2) to test the safety of the CCI system for the treated eyes and (3) to compare the pharmacokinetic profiles of HMP intraocular distribution after CCI delivery to i.v. injection. For each parameter evaluated, six rabbit eyes were used. For the CCI system, two concentrations of HMP (62.5 and 150mg ml(-1)), various intensities of current and duration of treatment were analyzed. In rabbits serving as controls the HMP was infused in the CCI device but without applied electric current. For the i.v. delivery, HMP at 10mg kg(-1)as a 62.5mg ml(-1)solution was used. The rabbits were observed clinically for evidence of ocular toxicity. At various time points after the administration of drug, rabbits were killed and intraocular fluids and tissues were sampled for methylprednisolone (MP) concentrations by high pressure liquid chromatography (HPLC). Histology examinations were performed on six eyes of each group. Among groups that received CCI, the concentrations of MP increased in all ocular tissues and fluids in relation to the intensities of current used (0.4, 1.0 and 2.0mA/0.5cm(2)) and its duration (4 and 10min). Sustained and highest levels of MP were achieved in the choroid and the retina of rabbit eyes treated with the highest current and 10min duration of CCI. No clinical toxicity or histological lesions were observed following CCI. Negligible amounts of MP were found in ocular tissues in the CCI control group without application of current. Compared to i.v. administration, CCI achieved higher and more sustained tissue concentrations with negligible systemic absorption. These data demonstrate that high levels of MP can be safely achieved in intraocular tissues and fluids of the rabbit eye, using CCI. With this system, intraocular tissues levels of MP are higher than those achieved after i.v. injection. Furthermore, if needed, the drug levels achieved with CCI can be modulated as a function of current intensity and duration of treatment. CCI could therefore be used as an alternative method for the delivery of high levels of MP to the intraocular tissues of both the anterior and posterior segments.

Converter-flux-based current control of voltage source PWM rectifiers - analysis and implementation

Pulsewidth-modulated (PWM) rectifier technology is increasingly used in industrial applications like variable-speed motor drives, since it offers several desired features such as sinusoidal input currents, controllable power factor, bidirectional power flow and high quality DC output voltage. To achieve these features,however, an effective control system with fast and accurate current and DC voltage responses is required. From various control strategies proposed to meet these control objectives, in most cases the commonly known principle of the synchronous-frame current vector control along with some space-vector PWM scheme have been applied. Recently, however, new control approaches analogous to the well-established direct torque control (DTC) method for electrical machines have also emerged to implement a high-performance PWM rectifier. In this thesis the concepts of classical synchronous-frame current control and DTC-based PWM rectifier control are combined and a new converter-flux-based current control (CFCC) scheme is introduced. To achieve sufficient dynamic performance and to ensure a stable operation, the proposed control system is thoroughly analysed and simple rules for the controller design are suggested. Special attention is paid to the estimationof the converter flux, which is the key element of converter-flux-based control. Discrete-time implementation is also discussed. Line-voltage-sensorless reactive reactive power control methods for the L- and LCL-type line filters are presented. For the L-filter an open-loop control law for the d-axis current referenceis proposed. In the case of the LCL-filter the combined open-loop control and feedback control is proposed. The influence of the erroneous filter parameter estimates on the accuracy of the developed control schemes is also discussed. A newzero vector selection rule for suppressing the zero-sequence current in parallel-connected PWM rectifiers is proposed. With this method a truly standalone and independent control of the converter units is allowed and traditional transformer isolation and synchronised-control-based solutions are avoided. The implementation requires only one additional current sensor. The proposed schemes are evaluated by the simulations and laboratory experiments. A satisfactory performance and good agreement between the theory and practice are demonstrated.

Analysis of the voltage source inverter with small DC-link capacitor

IIn electric drives, frequency converters are used to generatefor the electric motor the AC voltage with variable frequency and amplitude. When considering the annual sale of drives in values of money and units sold, the use of low-performance drives appears to be in predominant. These drives have tobe very cost effective to manufacture and use, while they are also expected to fulfill the harmonic distortion standards. One of the objectives has also been to extend the lifetime of the frequency converter. In a traditional frequency converter, a relatively large electrolytic DC-link capacitor is used. Electrolytic capacitors are large, heavy and rather expensive components. In many cases, the lifetime of the electrolytic capacitor is the main factor limiting the lifetime of the frequency converter. To overcome the problem, the electrolytic capacitor is replaced with a metallized polypropylene film capacitor (MPPF). The MPPF has improved properties when compared to the electrolytic capacitor. By replacing the electrolytic capacitor with a film capacitor the energy storage of the DC-linkwill be decreased. Thus, the instantaneous power supplied to the motor correlates with the instantaneous power taken from the network. This yields a continuousDC-link current fed by the diode rectifier bridge. As a consequence, the line current harmonics clearly decrease. Because of the decreased energy storage, the DC-link voltage fluctuates. This sets additional conditions to the controllers of the frequency converter to compensate the fluctuation from the supplied motor phase voltages. In this work three-phase and single-phase frequency converters with small DC-link capacitor are analyzed. The evaluation is obtained with simulations and laboratory measurements.

Scientific evidence on the usefulness of intraarticular hyaluronic acid injection in the management of temporomandibular dysfunction

Hyaluronic acid (HA) is found in high concentrations in cartilage and synovial fluid, and is an important component of the extracellular matrixes- exerting joint lubrication and buffering actions thanks to its viscoelastic properties. The present study examines the scientific evidence found in the current literature on the usefulness of the intraarticular injection of HA in patients with temporomandibular dysfunction. A literature search was made up until May 2008 in the following databases: PubMed / MEDLINE. Of the articles found in the literature, the present review included 18 relevant studies on the application of HA in the temporomandibular joint (TMJ). The quality, level of evidence and strength of recommendation of the articles was evaluated based on the"Strength of Recommendation Taxonomy" criteria. It is concluded that type A level of recommendation exists in favor of the intraarticular injection of HA in dysfunction of the TMJ. However, further studies are needed to establish the true therapeutic effects and to identify the best dosing regimen.

Définition et prise en charge de l'échec d'une première injection de toxine botulique Botox(®) 200 U pour hyperactivité détrusorienne neurogène : résultats de l'enquête DETOX [Definition of botulinum toxin failure in neurogenic detrusor overactivity: Preliminary results of the DETOX survey].

OBJECTIVE: There is currently no guideline regarding the management of neurogenic detrusor overactivity (NDO) refractory to intra-detrusor botulinum toxin injections. The primary objective of the present study was to find a consensus definition of failure of botulinum toxin intra-detrusor injections for NDO. The secondary objective was to report current trends in the managment of NDO refractory to botulinum toxin. METHODS: A survey was created, based on data drawn from current literature, and sent via e-mail to all the experts form the Group for research in neurourology in french language (GENULF) and from the comittee of neurourology of the French urological association (AFU). The experts who did not answer to the first e-mail were contacted again twice. Main results from the survey are presented and expressed as numbers and proportions. RESULTS: Out of the 42 experts contacted, 21 responded to the survey. Nineteen participants considered that the definition of failure should be a combination of clinical and urodynamics criteria. Among the urodynamics criteria, the persistence of a maximum detrusor pressure>40cm H2O was the most supported by the experts (18/21, 85%). According to the vast majority of participants (19/21, 90.5%), the impact of injections on urinary incontinence should be included in the definition of failure. Regarding the management, most experts considered that the first line treatment in case of failure of a first intra-detrusor injection of Botox(®) 200 U should be a repeat injection of Botox(®) at a higher dosage (300 U) (15/20, 75%), regardless of the presence or not of urodynamics risk factors of upper tract damage (16/20, 80%). CONCLUSION: This work has provided a first overview of the definition of failure of intra-detrusor injections of botulinum toxin in the management of NDO. For 90.5% of the experts involved, the definition of failure should be clinical and urodynamic and most participants (75%) considered that, in case of failure of a first injection of Botox(®) 200 U, repeat injection of Botox(®) 300 U should be the first line treatment. Level of proof 4.

Eletrodissolução de ligas de latão empregando sistemas de análise em fluxo para a determinação de cobre, zinco e chumbo por ICP-AES

An on-line electrodissolution procedure implemented in a flow injection system for determination of copper, zinc and lead in brasses alloys by ICP-AES is described. Sample dissolution procedure was carried out by using a PTFE chamber and a DC power supply with constant current. Solid sample was attached to chamber as anode and a gold tubing coupled in the chamber was used as cathode. An electrolytic solution flowing through the gold tubing closed the electric circuit with sample, in order to provide condition for electric dissolution when the DC power supply was switched on. The best results were achieved by using a 1.5 mol l-1 nitric acid solution as electrolyte and a 2.5 A current intensity. The procedure presented a good performance characterized by a relative standard deviation better than < 5% (n=5) and a sample throughput of 180 determinations per hour for Cu, Zn and Pb. Results were in agreement with those obtained by conventional acid dissolution (99% confidence level).

Eletrodissolução anódica em sistema de injeção em fluxo: uma alternativa rápida e eficiente para dissolução de ligas metálicas

Anodic electrodissolution procedure in a flow injection system for determination of constituents in alloys is discussed. This approach implement sample preparation procedure by using a chamber and a DC power supply with constant direct current. Solid sample was attached to chamber as anode. In this review a general overview of these procedure is presented. The procedure presented a good performance characterized by a high sample throughput determinations, good accuracy and relative standard deviation.