Glyphosate tolerant volunteer corn control at two development stages

The loss of grains during the harvest of glyphosate tolerant corn may generate volunteer plants, which can interfere in the conventional or glyphosate crop in succession. The current work aim to evaluate the control of the volunteer corn glyphosate tolerant under two weed stages. Aimed to evaluate the control of volunteer glyphosate tolerant corn in two stages of development. There were conducted two experiments with hybrid 2B688 HR (lepidoptera and glyphosate tolerant), the application were at V5 and V8 stage. The experiment was randomized block design with four replicates, using the treatments: haloxyfop at 25, 50 and 62 g ha-1 alone and associated with 2,4-D at 670 g ha-1 or fluroxypyr at 200 g ha-1. The standard was clethodim at 84 g ha-1 with 2,4-D and fluroxypyr at same rates. The applications of haloxyfop and clethodim both isolated or in a mixture with 2,4-D and fluroxypyr at V5 stage showed total control (100%) at 32 and 39 days after the application, except for haloxyfop + 2,4-D (25 + 670 g ha-1) mixture, which did not provided adequate control. At V8 stage, haloxyfop + 2,4-D (50 + 670 g ha-1) and haloxyfop + 2,4-D (62 + 670 g ha-1) mixtures took up to 6 and 10 days or longer to reach adequate to excellent control, when compared to haloxyfop isolated applications in the same doses, respectively. Either isolated clethodim or mixed with 2, 4-D and fluroxypyr did not show adequate control. The treatments showed efficient control on volunteer corn plants at V5 stage, except for haloxyfop + 2, 4-D (25 + 670 g ha-1) mixture. At V8 stage applications, haloxyfop either isolated or mixture with fluroxypyr demonstrated excellent control on every evaluated dose. The mixture with 2, 4-D can reduce haloxyfop efficiency at low doses. Clethodim alone or mixed with 2,4-D or furoxypyr did not provide acceptable level of control.

Use of grass carp (Ctenopharyngodon idella) as a biological control agent for submerged aquatic macrophytes

This study aimed to evaluate feed preference and control efficacy of grass carp (Ctenopharyngodon idella) on the aquatic macrophytes Ceratophyllum demersum, Egeria densa and Egeria najas. An experiment was carried out at mesocosms conditions with 2,000 liters capacity and water residence time of 2.8 days. C. demersum, E. densa e E. najas biomasses were offered individually with sixty g and coupled in similar quantities of 30 g of each species, evaluated during 81 days, envolving 6 treatments. (1 - C. demersum, 2 - E. najas, 3 -E. densa, 4 - C. demersum + E. najas, 5 - C. demersum + E. densa and 6 - E. najas + E. densa). When offered individually, E. najas and C. demersum presented the same predation rate by grass carp, which was higher than E. densa predation rate. When plants were tested in pairs, the order of feed preference was C. demersum > E. najas > E. densa. E. najas and C. demersum percentage control ranged from 73 to 83%. No relation between biomass consumption and grass carp body weight gain was observed, probably due to differences in nutritional quality among macrophyte species according to fish necessities. Therefore, it is concluded that the use of grass carp is one excellent technique to control submersed macrophytes in Brazil.

Selectivity of chemical weed control systems in conventional cotton

Cotton is highly susceptible to the interference imposed by weed community, being therefore essential to adopt control measures ensuring the crop yield. Herbicides are the primary method of weed control in large-scale areas of production, and usually more than one herbicide application is necessary due to the extensive crop cycle. This study aimed to evaluate the selectivity of different chemical weed control systems for conventional cotton. The experiment took place in the field in a randomized block design, with twenty nine treatments and four replications in a split plot layout (adjacent double check). Results showed that triple mixtures in pre-emergence increased the chance of observing reductions in the cotton yield. To avoid reductions in crop yield, users should proceed to a maximum mixture of two herbicides in pre-emergence, followed by S-metolachlor over the top, followed by one post-emergence mixture application of pyrithiobac-sodium + trifloxysulfuron-sodium.

Chemical control of different Digitaria insularis populations and management of a glyphosate-resistant population

This study aimed to control different populations of Digitaria insularisby glyphosate herbicide, isolated and mixed, besides the combination of methods (chemical and mechanical) to manage resistant adult plants. Three experiments were conducted, one in pots which were maintained under non-controlled conditions and two under field conditions. In the experiment in pots, twelve populations of D. insularis were sprayed with isolated glyphosate (1.44 and 2.16 kg a.e. ha-1) and mixed (1.44 and 2.16 kg a.e. ha-1) with quizalofop-p tefuryl (0.12 kg i.a. ha-1). The treatment of 1.44 kg a.e. ha-1 of glyphosate plus 0.12 kg a.i. ha-1 of quizalofop was sufficient for adequate control (>95%) of all populations. Population 11 (area of grain production in Itumbiara, GO) was considered sensitive to glyphosate. Others populations were moderately sensitive or tolerant to the herbicide. In the field, the plants of D. insularis of one of the experiments were mowed and, in the other, there were not. Eight treatments with herbicides [isolated glyphosate (1.44 and 2.16 kg a.e. ha-1) and mixed (1.44 and 2.16 kg a.e. ha-1) with quizalofop-p-tefuryl at 0.12 kg a.i. ha-1), clethodim at 0.108 kg a.i. ha-1) or nicosulfuron at 0.06 kg a.i. ha-1)] were assessed, in combination with or without sequential application of the standard treatment, sprayed 15 days after the first application. The combination of the mechanic control with the application of glyphosate (2.16 and 1.44 kg a.e. ha-1) plus quizalofop-p-tefuryl (0.12 kg a.i. ha-1) or clethodim (0.108 kg a.i. ha-1), associated to the sequential application, was the most effective strategy for the management of adult plants of resistant D. insularis.

INFLUENCE OF PRECIPITATION AND SUGARCANE STRAW IN AMINOCYCLOPYRACHLOR AND INDAZIFLAM CONTROL EFFICIENCY

ABSTRACTThe raw sugarcane harvesting system has changed the dynamics of weed tillage for this crop, changing the predominant weed species and providing a barrier between the herbicide and the soil. Thus, this study has aimed to assess the influence of precipitation and sugarcane straw in the aminocyclopyrachlor and indaziflam herbicides control efficiency for the species Ipomoea trilobaand Euphorbia heterophylla. There were two trials, one for aminocyclopyrachlor and one for the indaziflam, both in the greenhouse at the campus of Faculdade Integrado in the Brazilian city of Campo Mourão, PR. Each experiment consisted of eight treatments with four replications. The treatments consisted of the combination of the presence of straw (10 t ha-1), capillary irrigation and rainfall simulation (20 mm). Assessments of control percentage of I.triloba and E.heterophylla were carried out, as well as the number of plants per pot. The aminocyclopyrachlor and indaziflam herbicides applied directly to the soil were efficient in controlling these species. The 20 mm rainfall simulation or daily irrigation on the straw are indispensable to promote the removal of aminocyclopyrachlor and indaziflam from the straw and provide satisfactory control of I.triloba and E.heterophylla.

ANTAGONISM IS THE PREDOMINANT EFFECT OF HERBICIDE MIXTURES USED FOR IMIDAZOLINONE-RESISTANT BARNYARDGRASS (Echinochloa crus-galli) CONTROL

ABSTRACTHerbicides mixtures are used in many situations without the adequate knowledge related with the effect on major target weeds. The objective of this study was to evaluate the effects of different herbicides mixtures used in irrigated rice in order to establish the adequate combinations for the prevention and management of herbicide resistance in barnyardgrass (Echinochloa crus-galli). Three experiments were performed at field conditions with all major post-emergent herbicides used in irrigated rice in Brazil. The first experiment was performed with barnyardgrass resistant to imidazolinone herbicides and herbicides applied at label rates. The second and third experiments were performed with barnyardgrass resistant and susceptible to imidazolinone herbicides applied at doses of 50 or 75% of the label rates. The occurrence of additive, synergistic and antagonistic effects was identified at 18, 18 and 64%, respectively, among the total of 50 different associations of herbicide and rates evaluated. In general, the mixture of ACCase inhibitors with ALS inhibitors, quinclorac, clomazone + propanil or thiobencarb resulted in antagonism. Sinergic mixtures were found in clomazone with propanil + thiobencarb, profoxydim with cyhalofop-butyl or clomazone, and quinclorac with imazapyr + imazapic, bispyribac-sodium or cyhalofop-butyl. The mixtures of quinclorac with profoxydim were antagonic. Rice grain yield varied according to the efficiency of weed control. Seveveral mixtures were effective for imidazolinone resistant barnyardgrass control.

Application Volumes and Sizes of Droplets for the Application of Diquat Herbicide in the Control of Eichhornia crassipes

The objective of this study was to evaluate the efficiency of application and the efficacy of control of water hyacinth (Eichhornia crassipes) with the use of the diquat herbicide done with two application volumes associated to three droplets classes. Three experiments were conducted; in the first, the application efficiency was evaluated; in the second, the control efficiency and; in the third, the droplet spectrum. They were conducted in a completely randomized design with five, four and six replicates, respectively. The treatments were arranged in a 2 x 3 factorial design, with two application volumes (100 and 200 L ha-1) and three droplets classes (fine, extremely coarse and ultra-coarse) to the first and second experiment and the third comprised two diquat concentrations in spray solution (2 and 4 g i.a. L-1) and three droplets classes (fine, extremely coarse and ultra-coarse). The application efficiency was determined by the coverage by droplets, spray deposition and active ingredient of the herbicide (diquat). The efficacy was measured by the control and the percentage of plants with regrowth at 50 days after application. The spectrum of droplets produced per each nozzle model used to obtain the droplets classes were analyzed. According to the parameters analyzed, using the droplets classes extremely thick and ultra thick can provide greater certainty in the application of diquat in the aquatic environment associated with the deposition of the active and sufficient coverage to control Eichhornia crassipes with both application volumes

Control of attention by a peripheral visual cue depends on whether the target is difficult to discriminate

The influence of a peripheral cue represented by a gray ring on responsivity to a subsequent target varies. When a vertical line inside a ring was a go target and a white small ring inside a ring was a no-go target, reaction time was shorter at the same location relative to a different location. However, no reaction time difference between the two locations occurred when a white cross inside the ring, instead of the white vertical line inside the ring, was the go target. We investigated whether this last finding was due to a forward masking influence of the cue, a requirement of low attention for the discrimination or a lack of attention mobilization by the cue. In Experiment 1, the intensity of the cue was reduced in an attempt to reduce forward masking. In Experiment 2, the vertical line and the cross were presented in the same block of trials so as to be dealt with a common attentional strategy. In Experiments 3 and 4, the no-go target was a 45º rotated cross inside a ring to increase the difficulty of the discrimination. No evidence was obtained that the cross was forward masked by the cue nor that it demanded less attention to be discriminated from the small ring. There was a facilitation of responsivity by the cue when the small ring was replaced by the rotated cross. The results suggest that when the discrimination to be performed is too easy the cue does not mobilize attention.

Novel control, haptic and calibration methods for teleoperated electrohydraulic servo systems

The aim of this thesis is to propose a novel control method for teleoperated electrohydraulic servo systems that implements a reliable haptic sense between the human and manipulator interaction, and an ideal position control between the manipulator and the task environment interaction. The proposed method has the characteristics of a universal technique independent of the actual control algorithm and it can be applied with other suitable control methods as a real-time control strategy. The motivation to develop this control method is the necessity for a reliable real-time controller for teleoperated electrohydraulic servo systems that provides highly accurate position control based on joystick inputs with haptic capabilities. The contribution of the research is that the proposed control method combines a directed random search method and a real-time simulation to develop an intelligent controller in which each generation of parameters is tested on-line by the real-time simulator before being applied to the real process. The controller was evaluated on a hydraulic position servo system. The simulator of the hydraulic system was built based on Markov chain Monte Carlo (MCMC) method. A Particle Swarm Optimization algorithm combined with the foraging behavior of E. coli bacteria was utilized as the directed random search engine. The control strategy allows the operator to be plugged into the work environment dynamically and kinetically. This helps to ensure the system has haptic sense with high stability, without abstracting away the dynamics of the hydraulic system. The new control algorithm provides asymptotically exact tracking of both, the position and the contact force. In addition, this research proposes a novel method for re-calibration of multi-axis force/torque sensors. The method makes several improvements to traditional methods. It can be used without dismantling the sensor from its application and it requires smaller number of standard loads for calibration. It is also more cost efficient and faster in comparison to traditional calibration methods. The proposed method was developed in response to re-calibration issues with the force sensors utilized in teleoperated systems. The new approach aimed to avoid dismantling of the sensors from their applications for applying calibration. A major complication with many manipulators is the difficulty accessing them when they operate inside a non-accessible environment; especially if those environments are harsh; such as in radioactive areas. The proposed technique is based on design of experiment methodology. It has been successfully applied to different force/torque sensors and this research presents experimental validation of use of the calibration method with one of the force sensors which method has been applied to.

Analysing the power consumption behaviour of Ethernet switch using Design of Experiment

At present, one of the main concerns of green network is to minimize the power consumption of network infrastructure. Surveys show that, the highest amount of power is consumed by the network devices during its runtime. However to control this power consumption it is important to know which factors has highest impact on this matter. This paper is focused on the measurement and modeling the power consumption of an Ethernet switch during its runtime considering various types of input parameters with all possible combinations. For the experiment, three input parameters are chosen. They are bandwidth, link load and number of connections. The output to be measured is the power consumption of the Ethernet switch. Due to the uncertain power consuming pattern of the Ethernet switch a fully-comprehensive experimental evaluation would require an unfeasible and cumbersome experimental phase. Because of that, design of experiment (DoE) method has been applied to obtain adequate information on the effects of each input parameters on the power consumption. The whole work consists of three parts. In the first part a test bed is planned with input parameters and the power consumption of the switch is measured. The second part is about generating a mathematical model with the help of design of experiment tools. This model can be used for measuring precise power consumption in different scenario and also pinpoint the parameters with higher influence in power consumption. And in the last part, the mathematical model is evaluated by comparing with the experimental values.

Effects of different concentrations of passion fruit peel (Passiflora edulis) on the glicemic control in diabetic rat

Diabetes mellitus, an endocrine disorder, is the major cause of morbidity in developing countries, and it is considered the fourth leading cause of death worldwide. The conventional therapy for diabetes is insulin treatment. The peel of the Passion fruit is rich in fiber and prevents the absorption of carbohydrates, and thus can control and reduce the blood sugar rate. The objective of this study was to analyze the effect of the passion fruit peel flour on the glicemia of diabetic rats, as well as to study the probable action mechanisms. Wistar rats were used in the experiment and were offered the flours of the passion fruit peel in three concentrations: 5, 10, and 15%, and a casein diet as control. The most significant effect on the reduction of the glicemic rate was obtained with the 5% diet. The best values of hepatic glycogen were found in the 5 and 10% diets. The results of this study suggest that the 5% passion fruit flour diet was the one that provided the best reduction of blood glucose levels (59%) and the higher increase of the hepatic glycogen level (71%). The conversion of blood glucose into hepatic glycogen was considered the probable action mechanism involved.

The neurobiology of meditation for the control of pain

La douleur est une expérience multidimensionnelle comportant des aspects sensoriels, émotionnels et cognitifs. Il a été montré que cette expérience peut être modulée par des facteurs psychologiques ou des interventions cognitives comme l’attention, la distraction, l’hypnose ou les attentes. La tradition orientale suggère également que la pratique de la méditation pourrait avoir des effets analgésiques. D’un point de vue théorique, plusieurs mécanismes pourraient expliquer ces effets. Cependant, très peu d’études ont testé ces hypothèses. Les études présentées dans cette thèse avaient donc pour objectif d’examiner les mécanismes analgésiques de la méditation. Dans un premier temps, une étude psychophysique a été réalisée afin de comparer les réponses à la douleur entre des adeptes de la méditation Zen et des sujets contrôles, dans différentes conditions attentionnelles. Durant la condition attentionnelle de type « mindful », les adeptes de la méditation ont présenté une plus faible sensibilité à la douleur, des réponses attentionnelles à la douleur atypiques et une diminution de la perception de la douleur associée à l’entraînement à la méditation. Une deuxième étude a été réalisée en imagerie par résonance magnétique fonctionnelle (IRMf) avec des groupes de participants similaires. Dans une condition sans méditation, les adeptes de la méditation ont présenté de plus fortes réponses nociceptives dans les régions primaires de la douleur. Les régions cérébrales associées aux processus d’évaluation, à la mémoire et aux émotions ont quant à elles montré une diminution d’activité. De plus, cette diminution était plus importante chez les adeptes de la méditation les plus expérimentés et elle était associée à des évaluations de douleur plus faibles. Par ailleurs, des changements de connectivité fonctionnelle entre le cortex préfrontal et une région primaires de la douleur étaient associés à la sensibilité à la douleur chez les adeptes de la méditation. Finalement, une étude d’imagerie cérébrale structurale (publiée comme deux études séparées) a été réalisée pour examiner les différences d’épaisseur corticale entre les groupes, pour des régions associées à la douleur. Les adeptes de la méditation ont présenté une épaisseur plus importante de matière grise dans plusieurs régions associées à la douleur et l’attention. De plus, ces différences étaient associées à une mesure expérientielle de l’attention, à la sensibilité à la douleur et à l’expérience de méditation. Dans l’ensemble, ces résultats suggèrent que la méditation pourrait influencer la perception de la douleur par des changements fonctionnels et physiques dans le cerveau. De plus, le patron d’activation et la modulation de l’expérience paraissent uniques en comparaison à ceux d’autres interventions, ce qui suggère qu’un état de détachement et un focus mental favorisent la dissociation entre les aspects désagréables et sensoriels d’un stimulus nociceptif.

Studies on arbuscular mycorrhiza (AM) in the Alentejo (Portugal) using pea mutants resistant to AM fungi as a control tool for field conditions

The utilization and management of arbuscular mycorrhiza (AM) symbiosis may improve production and sustainability of the cropping system. For this purpose, native AM fungi (AMF) were sought and tested for their efficiency to increase plant growth by enhanced P uptake and by alleviation of drought stress. Pot experiments with safflower (Carthamus tinctorius) and pea (Pisum sativum) in five soils (mostly sandy loamy Luvisols) and field experiments with peas were carried out during three years at four different sites. Host plants were grown in heated soils inoculated with AMF or the respective heat sterilized inoculum. In the case of peas, mutants resistant to AMF colonization were used as non-mycorrhizal controls. The mycorrhizal impact on yields and its components, transpiration, and P and N uptake was studied in several experiments, partly under varying P and N levels and water supply. Screening of native AMF by most probable number bioassays was not very meaningful. Soil monoliths were placed in the open to simulate field conditions. Inoculation with a native AMF mix improved grain yield, shoot and leaf growth variables as compared to control. Exposed to drought, higher soil water depletion of mycorrhizal plants resulted in a haying-off effect. The growth response to this inoculum could not be significantly reproduced in a subsequent open air pot experiment at two levels of irrigation and P fertilization, however, safflower grew better at higher P and water supply by multiples. The water use efficiency concerning biomass was improved by the AMF inoculum in the two experiments. Transpiration rates were not significantly affected by AM but as a tendency were higher in non-mycorrhizal safflower. A fundamental methodological problem in mycorrhiza field research is providing an appropriate (negative) control for the experimental factor arbuscular mycorrhiza. Soil sterilization or fungicide treatment have undesirable side effects in field and greenhouse settings. Furthermore, artificial rooting, temperature and light conditions in pot experiments may interfere with the interpretation of mycorrhiza effects. Therefore, the myc- pea mutant P2 was tested as a non-mycorrhizal control in a bioassay to evaluate AMF under field conditions in comparison to the symbiotic isogenetic wild type of var. FRISSON as a new integrative approach. However, mutant P2 is also of nod- phenotype and therefore unable to fix N2. A 3-factorial experiment was carried out in a climate chamber at high NPK fertilization to examine the two isolines under non-symbiotic and symbiotic conditions. P2 achieved the same (or higher) biomass as wild type both under good and poor water supply. However, inoculation with the AMF Glomus manihot did not improve plant growth. Differences of grain and straw yields in field trials were large (up to 80 per cent) between those isogenetic pea lines mainly due to higher P uptake under P and water limited conditions. The lacking N2 fixation in mutants was compensated for by high mineral N supply as indicated by the high N status of the pea mutant plants. This finding was corroborated by the results of a major field experiment at three sites with two levels of N fertilization. The higher N rate did not affect grain or straw yields of the non-fixing mutants. Very efficient AMF were detected in a Ferric Luvisol on pasture land as revealed by yield levels of the evaluation crop and by functional vital staining of highly colonized roots. Generally, levels of grain yield were low, at between 40 and 980 kg ha-1. An additional pot trial was carried out to elucidate the strong mycorrhizal effect in the Ferric Luvisol. A triplication of the plant equivalent field P fertilization was necessary to compensate for the mycorrhizal benefit which was with five times higher grain yield very similar to that found in the field experiment. However, the yield differences between the two isolines were not always plausible as the evaluation variable because they were also found in (small) field test trials with apparently sufficient P and N supply and in a soil of almost no AMF potential. This similarly occurred for pea lines of var. SPARKLE and its non-fixing mycorrhizal (E135) and non-symbiotic (R25) isomutants, which were tested in order to exclude experimentally undesirable benefits by N2 fixation. In contrast to var. FRISSON, SPARKLE was not a suitable variety for Mediterranean field conditions. This raises suspicion putative genetic defects other than symbiotic ones may be effective under field conditions, which would conflict with the concept of an appropriate control. It was concluded that AMF resistant plants may help to overcome fundamental problems of present research on arbuscular mycorrhiza, but may create new ones.

Face and content validity of smoking-related and matched control pictures

Smoking-related pictures and matched controls are useful tools in experimental tasks of attentional bias. Noteworthy the procedures used to produce and validate these pairs of pictures are poorly reported. This study aimed to describe the production and evidence of validity of a set of smoking-related pictures and their matched controls. Two studies were conducted to assess validity. An online internet-based survey was used to assess face validity of 12 pictures related to smoking behavior and 12 matched controls. All pictures were colored and were 95mm length x 130mm width. Participants were asked if the pictures were related or not to the smoking behavior and also rated how much each picture was related to smoking behavior. The second study investigated attentional bias in smokers (n = 47) and non-smokers (n = 50), and examined how they assessed all pictures in terms of pleasantness and the 12 smoking-related pictures in terms of relevance to their own smoking behavior. Craving was assessed before and after the experiment. Results indicate that this set of pictures are valid since smoking-related pictures were considered more related to smoking behavior compared to their matched controls. Moreover, smokers showed greater attentional bias for smoking-related pictures than non-smokers. Craving and relevance of the smoking-related pictures were higher in smokers than in non-smokers. Smokers considered smoking-related pictures them less unpleasant than non-smokers. These findings provide evidence of face and content validity of this set of pictures, which will be available to researchers, contributing to maximize the standardization of future investigations.

An international experiment with eRubrics : an approach to educational assessment in two courses of the early childhood education degree

Resumen basado en el de la publicaci??n