Re-theorizing the “digital divide”: Identifying dimensions of social exclusion in contemporary media technologies

The digital divide is the disparancy in access to information, in the ability to communicate, and in the capacity to make information and communication serve full participation in the information society. Indeed, the conversation about the digital divide has developed over the last decade from a focus on connectivity and access to information and communication technologies, to a conversation that encompasses the ability to use them and to the utility that usage provides (Wei et al., 2011). However, this conversation, while transitioning from technology to the skills of the people that use them and to the fruits of their use is limited in its ability to take into account the social role of information and communication technologies (ICTs). One successful attempt in conceptualizing the social impact of the differences in access to and utilization of digital communication technologies, was developed by van Dijk (2005) whose sequential model for analyzing the divide states that: 1. Categorical inequalities in society produce an unequal distribution of resources; 2. An unequal distribution of resources causes unequal access to digital technologies; 3. Unequal access to digital technologies also depends on the characteristics of these technologies; 4. Unequal access to digital technologies brings about unequal participation in society; 5. Unequal participation in society reinforces categorical inequalities and unequal distributions of resources.” (p. 15) As van Dijk’s model demonstrates, the divide’s impact is the exclusion of individuals from participation. Still left to be defined are the “categorical inequalities,” the “resources,” the “characteristics of digital technologies,” and the different levels of “access” that result in differentiated levels of participation, as these change over time due to the evolving nature of technology and the dynamics of society. And most importantly, the meaning of “participation” in contemporary society needs to be determined as it is differentiated levels of participation that are the result of the divide and the engine of the ever-growing disparities. Our argument is structured in the following manner: We first claim that contemporary digital media differ from the previous generation of ICTs along four dimensions: They offer an abundance of information resources and communication channels when compared to the relative paucity of both in the past; they offer mobility as opposed to the stationary nature of their predecessors; they are interactive in that they provide users with the capability to design their own media environments in contrast to the dictated environs of previous architectures; and, they allow users to communicate utilizing multi forms of mediation, unlike the uniformity of sound or word that limited users in the past. We then submit that involvement in the information society calls for egalitarian access to all four dimensions of the user experience that make contemporary media different from their predecessors and that the ability to experience all four affects the levels in which humans partake in the shaping of society. The model being cyclical, we then discuss how lower levels of participation contribute to the enhancement of social inequalities. Finally, we discuss why participation is needed in order to achieve full membership in the information society and what political philosophy should govern policy solutions targeting the re-inclusion of those digitally excluded.

Media futures: A review essay on'The Future of Reputation','TV Futures', and'The Future of the Internet and How to Stop It'

In his 1987 book, The Media Lab: Inventing the Future at MIT, Stewart Brand provides an insight into the visions of the future of the media in the 1970s and 1980s. 1 He notes that Nicolas Negroponte made a compelling case for the foundation of a media laboratory at MIT with diagrams detailing the convergence of three sectors of the media—the broadcast and motion picture industry; the print and publishing industry; and the computer industry. Stewart Brand commented: ‘If Negroponte was right and communications technologies really are converging, you would look for signs that technological homogenisation was dissolving old boundaries out of existence, and you would expect an explosion of new media where those boundaries used to be’. Two decades later, technology developers, media analysts and lawyers have become excited about the latest phase of media convergence. In 2006, the faddish Time Magazine heralded the arrival of various Web 2.0 social networking services: You can learn more about how Americans live just by looking at the backgrounds of YouTube videos—those rumpled bedrooms and toy‐strewn basement rec rooms—than you could from 1,000 hours of network television. And we didn’t just watch, we also worked. Like crazy. We made Facebook profiles and Second Life avatars and reviewed books at Amazon and recorded podcasts. We blogged about our candidates losing and wrote songs about getting dumped. We camcordered bombing runs and built open‐source software. America loves its solitary geniuses—its Einsteins, its Edisons, its Jobses—but those lonely dreamers may have to learn to play with others. Car companies are running open design contests. Reuters is carrying blog postings alongside its regular news feed. Microsoft is working overtime to fend off user‐created Linux. We’re looking at an explosion of productivity and innovation, and it’s just getting started, as millions of minds that would otherwise have drowned in obscurity get backhauled into the global intellectual economy. The magazine announced that Time’s Person of the Year was ‘You’, the everyman and everywoman consumer ‘for seizing the reins of the global media, for founding and framing the new digital democracy, for working for nothing and beating the pros at their own game’. This review essay considers three recent books, which have explored the legal dimensions of new media. In contrast to the unbridled exuberance of Time Magazine, this series of legal works displays an anxious trepidation about the legal ramifications associated with the rise of social networking services. In his tour de force, The Future of Reputation: Gossip, Rumor, and Privacy on the Internet, Daniel Solove considers the implications of social networking services, such as Facebook and YouTube, for the legal protection of reputation under privacy law and defamation law. Andrew Kenyon’s edited collection, TV Futures: Digital Television Policy in Australia, explores the intersection between media law and copyright law in the regulation of digital television and Internet videos. In The Future of the Internet and How to Stop It, Jonathan Zittrain explores the impact of ‘generative’ technologies and ‘tethered applications’—considering everything from the Apple Mac and the iPhone to the One Laptop per Child programme.

The significance of brittle reaction layers in fusing of dental ceramics to titanium

This thesis comprises four intercomplementary parts that introduce new approaches to brittle reaction layers and mechanical compatibility of metalloceramic joints created when fusing dental ceramics to titanium. Several different methods including atomic layer deposition (ALD), sessile drop contact angle measurements, scanning acoustic microscopy (SAM), three-point bending (TPB, DIN 13 927 / ISO 9693), cross-section microscopy, scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS) were employed. The first part investigates the effects of TiO2 layer structure and thickness on the joint strength of the titanium-metalloceramic system. Samples with all tested TiO2 thicknesses displayed good ceramics adhesion to Ti, and uniform TPB results. The fracture mode was independent of oxide layer thickness and structure. Cracking occurred deeper inside titanium, in the oxygen-rich Ti[O]x solid solution surface layer. During dental ceramics firing TiO2 layers dissociate and joints become brittle with increased dissolution of oxygen into metallic Ti and consequent reduction in the metal plasticity. To accomplish an ideal metalloceramic joint this needs to be resolved. The second part introduces photoinduced superhydrophilicity of TiO2. Test samples with ALD deposited anatase TiO2 films were produced. Samples were irradiated with UV light to induce superhydrophilicity of the surfaces through a cascade leading to increased amount of surface hydroxyl groups. Superhydrophilicity (contact angle ~0˚) was achieved within 2 minutes of UV radiation. Partial recovery of the contact angle was observed during the first 10 minutes after UV exposure. Total recovery was not observed within 24h storage. Photoinduced ultrahydrophilicity can be used to enhance wettability of titanium surfaces, an important factor in dental ceramics veneering processes. The third part addresses interlayers designed to restrain oxygen dissolution into Ti during dental ceramics fusing. The main requirements for an ideal interlayer material are proposed. Based on these criteria and systematic exclusion of possible interlayer materials silver (Ag) interlayers were chosen. TPB results were significantly better in when 5 μm Ag interlayers were used compared to only Al2O3-blasted samples. In samples with these Ag interlayers multiple cracks occurred inside dental ceramics, none inside Ti structure. Ag interlayers of 5 μm on Al2O3-blasted samples can be efficiently used to retard formation of the brittle oxygen-rich Ti[O]x layer, thus enhancing metalloceramic joint integrity. The most brittle component in metalloceramic joints with 5 μm Ag interlayers was bulk dental ceramics instead of Ti[O]x. The fourth part investigates the importance of mechanical interlocking. According to the results, the significance of mechanical interlocking achieved by conventional surface treatments can be questioned as long as the formation of the brittle layers (mainly oxygen-rich Ti[O]x) cannot be sufficiently controlled. In summary in contrast to former impressions of thick titanium oxide layers this thesis clearly demonstrates diffusion of oxygen from sintering atmosphere and SiO2 to Ti structures during dental ceramics firing and the following formation of brittle Ti[O]x solid solution as the most important factors predisposing joints between Ti and SiO2-based dental ceramics to low strength. This among other predisposing factors such as residual stresses created by the coefficient of thermal expansion mismatch between dental ceramics and Ti frameworks can be avoided with Ag interlayers.

Visibility recovery on images acquired in attenuating media. Application to underwater, fog, and mammographic imaging

136 p.

Stable ordered mesoporous silica materials templated by high-temperature stable surfactant micelle in alkaline media

Ordered hexagonal mesoporous silica material (JLU-30) has been successfully synthesized in alkaline media at high temperature (> 160 degreesC, using cationic (1,3-dimethyl-2-imidazolidin-2-ylidene)hexadecylmethyl-ammonium bromide (DIHAB) as a template, and characterized with X-ray diffraction (XRD), transmission electron microscopy (TEM), nitrogen adsorption-desorption isotherms, differential thermal analysis (DTA), and thermogravimetric analysis (TG), as well as Al-27 and Si-29 nuclear magnetic resonance (NMR) spectroscopy. Mesoporous JLU-30 shows much higher hydrothermal stability than MCM-41. Si-29 NMR spectra indicate that the pore walls of JLU-30 samples synthesized at high temperature (160 degreesC) are fully condensed, giving a Q(4)/Q(3) ratio as high as 6.2. In contrast, MCM-41 synthesized at relatively low temperature (100 degreesC) shows the Q(4)/Q(3) + Q(2) ratio at 1.1. Such unique structural feature might be responsible for the observed highly hydrothermal stability of the mesoporous silica materials (JLU-30).

Dental topography and molar wear in Alouatta palliata from Costa Rica.

Paleoprimatologists depend on relationships between form and function of teeth to reconstruct the diets of fossil species. Most of this work has been limited to studies of unworn teeth. A new approach, dental topographic analysis, allows the characterization and comparison of worn primate teeth. Variably worn museum specimens have been used to construct species-specific wear sequences so that measurements can be compared by wear stage among taxa with known differences in diet. This assumes that individuals in a species tend to wear their molar teeth in similar ways, a supposition that has yet to be tested. Here we evaluate this assumption with a longitudinal study of changes in tooth form over time in primates. Fourteen individual mantled howling monkeys (Alouatta palliata) were captured and then recaptured after 2, 4, and 7 years when possible at Hacienda La Pacifica in Costa Rica between 1989-1999. Dental impressions were taken each time, and molar casts were produced and analyzed using dental topographic analysis. Results showed consistent decreases in crown slope and occlusal relief. In contrast, crown angularity, a measure of surface jaggedness, remained fairly constant except with extreme wear. There were no evident differences between specimens collected in different microhabitats. These results suggest that different individual mantled howling monkeys wear their teeth down in similar ways, evidently following a species-specific wear sequence. Dental topographic analysis may therefore be used to compare morphology among similarly worn individuals from different species.

Quantifying mircoorganism/organic matter interactions in saturated porous media.

Proteins and humic acids are common constituents of waste water. Latex colloids (colloids) acted as surrogates for microorganisms in multiple pulse dynamic column experiments (MPEs) that permitted colloid mobility to be quantified before and after the injection of either BSA (a protein), or Suwannee River humic acid (SRHA).
At low OM coverage colloid breakthrough curves demonstrated both BSA and SRHA reduced colloid deposition rates, but did not affect colloid irreversible deposition mechanisms. By contrast, high levels of SRHA surface coverage not only further reduced the matrix’s ability to attenuate colloids, but also resulted in reversible adsorption of a significant fraction of colloids deposited. Modelling of colloid responses using random sequential adsorption modelling suggested that 1 microgram of SRHA had the same effect as the deposition of 5.90±0.14 x109 colloids; the model suggested that adsorption of the same mass of BSA was equivalent to the deposition of between 7.1x108 and 2.3x109 colloids.
Colloid responses in MPEs where BSA coverage of colloid deposition sites approached saturation demonstrated the sand matrix remained capable of adsorbing colloids. However, in contrast to responses observed in MPEs at low surface coverage, continued colloid injection showed that the sand’s attenuation capacity increased with time, i.e. colloid concentrations declined as more were deposited (filter ripening).
Importance: Study results highlight the contrasting responses that may arise due to the interactions between colloids and OM in porous media. Results not only underscore that colloids can interact differently with various forms of deposited OM, but also that a single type of OM may generate dramatically different responses depending on the degree of surface coverage. The MPE method provides a means of quantifying the influence of OM on microorganism mobility in porous media such as filter beds, which may be used for either drinking water treatment or waste water treatment. In the wider environment study findings have potential to allow more confident predictions of the mobility of sewage derived pathogens discharging to groundwater.

Electromagnetic Focusing and Imaging in Stratified Media Using Gradient Phase Profiled Conjugating Lens

High-resolution imaging of a dipole source in stratified medium based on negative refraction is presented in this paper. Compensation of the material parameter contrast at the stratified media interface is achieved using a gradient phase profiled conjugating lens (GPCL). It is shown both analytically and numerically that the phase gradient applied across the GPCL positioned at the interface of vertically stratified media enables a high-quality image of a dipole source in a mirror symmetric position with respect to the lens plane. The analytical closed form expression of the phase gradient function is derived using Huygens-Kirchhoff principle. The result is applicable to media with arbitrary stratification and material parameters, including lossy materials. The mechanism for formation of the dipole image in the stratified medium and aberration due to the dielectric contrast at the interface, particularly electromagnetic loss, is discussed in detail. The efficacy of gradient phase and amplitude aberration compensations mechanisms available through the GPCL is articulated. The results of the study are of importance in a wide range of imaging problems in stratified media for medical, civil, and military applications.

Just noticeable differences in perceived image contrast with changes in displayed image size

An evaluation of the change in perceived image contrast with changes in displayed image size was carried out. This was achieved using data from four psychophysical investigations, which employed techniques to match the perceived contrast of displayed images of five different sizes. A total of twenty-four S-shape polynomial functions were created and applied to every original test image to produce images with different contrast levels. The objective contrast related to each function was evaluated from the gradient of the mid-section of the curve (gamma). The manipulation technique took into account published gamma differences that produced a just-noticeable-difference (JND) in perceived contrast. The filters were designed to achieve approximately half a JND, whilst keeping the mean image luminance unaltered. The processed images were then used as test series in a contrast matching experiment. Sixty-four natural scenes, with varying scene content acquired under various illumination conditions, were selected from a larger set captured for the purpose. Results showed that the degree of change in contrast between images of different sizes varied with scene content but was not as important as equivalent perceived changes in sharpness.

Media bias and central bank response. Evidence from the nominal exchange rate behavior in Colombia

Since 1991 Colombia has had a market-determined Peso - US Dollar Nominal Exchange Rate (NER), after more than 20 years of controlled and multiple exchange rates. The behavior (revaluation / devaluation) of the NER is constantly reported in news, editorials and op-eds of major newspapers of the nation with particular attention to revaluation. The uneven reporting of revaluation episodes can be explained by the existence of an interest group particulary affected by revaluation, looking to increase awareness and sympathy for help from public institutions. Using the number of news and op-eds from a major Colombian newspaper, it is shown that there is an over-reporting of revaluation episodes in contrast to devaluation ones. Secondly, using text analysis upon the content of the news, it is also shown that the words devaluation and revaluation are far apart in the distribution of words within the news; and revaluation is highly correlated with words related to: public institutions, exporters and the need of assistance. Finally it is also shown that the probability of the central bank buying US dollars to lessen revaluation effects increases with the number of news; even though the central bank allegedly intervenes in the exchange rate market only to tame volatility or accumulate international reserves.

Actitud de los escolares murcianos hacia la salud dental

Construir y validar una escala para medir la actitud de los escolares murcianos hacia la salud dental, conocer sus actitudes e identificar algunas de las variables que influyen en dicha actitud.Se hizo un muestreo aleatorio, por tipo de estudios y situaci??n del centro, y por aulas, siendo el tama??o de la muestra de 4221 alumnos. Se construyo una escala de Likert de cinco opciones para conocer la aptitud de los escolares murcianos hacia la salud dental.Como resultado final, el 6,8 por ciento de los escolares no cepilla nunca o casi nunca, mientras que el 65 por ciento lo hace una vez al d??a por lo menos. El 16,2 por ciento de la poblaci??n escolar nunca ha visitado al dentista y el 13,9 por ciento presenta ansiedad dental. La actitud media ha sido de 3,91 sobre 5, que puede considerarse regular-buena. Los escolares de EGB presentan la mejor actitud, independientemente de sus h??bitos higi??nicos dentales. En definitiva, la variable que m??s influye en la actitud es la ansiedad dental, quedando en un segundo plano la frecuencia del cepillado, la periodicidad de las visitas dentales y el sexo (las mujeres presentan mejor actitud que los hombres). Los aspectos de la salud dental mas necesitados de cambios positivos son el miedo y la preocupaci??n por la salud dental.

In vitro cytotoxicity of dental alloys and cpTi obtained by casting

Background: This study aimed to compare the cytotoxicity of base-metal dental alloys and to evaluate if the casting method could influence their cytotoxicity. Methods: Disks of base-metal dental alloys were cast by two methods: plasma, under argon atmosphere, injected by vacuum-pressure; and oxygen-gas flame, injected by centrifugation, except Ti-6Al-4V and commercially pure titanium (cpTi), cast only by plasma. SCC9 cells were cultured in culture media D-MEM/Ham`s F12 supplemented, at 37 degrees C in a humidified atmosphere of 5% carbon dioxide and 95% air, on the previously prepared disks. At subconfluence in wells without disks (control), cell number and viability were evaluated. Results: In plasma method, cpTi and Ti-6Al-4V were similar to control and presented higher number of cells than all other alloys, followed by Ni-Cr. In oxygen-gas name method, all alloys presented fewer cells than control. Ni-Cr presented more cells than any other alloy, followed by Co-Cr-Mo-W which presented more cells than Ni-Cr-Ti, Co-Cr-Mo, and Ni-Cr-Be. There were no significant differences between casting methods related to cell number. Cell viability was not affected by either chemical composition or casting methods. Conclusion: cpTi and Ti-6Al-4V were not cytotoxic while Ni-Cr-Be was the most cytotoxic among tested alloys. The casting method did not affect cytotoxicity of the alloys. (c) 2007 Wiley Periodicals, Inc.

Measurement of shrinkage of composite resin by laser speckle contrast analysis

The aim of this study was to evaluate the shrinkage of a microhybrid dental composite resin photo-activated by one LED with different power densities by means of speckle technique. The dental composite resin Filtek (TM) Z-250 (3M/ESPE) at color A(2) was used for the samples preparation. Uncured composite was packed in a metallic mold and irradiated during 20 s from 100 to 1000 mW cm(-2). For the photo-activation of the samples, it was used a LED prototype (Light Emission Diode) with wavelength centered at 470 nm and adjustable power density until 1 W cm(-2). The speckle patterns obtained from the bottom composite surfaces were monitored using a CCD camera without lens. The speckle field is recorded in a digital picture and stored by CCD camera as the carrier of information on the displacement of the tested surface. The calculated values were obtained for each pair of adjacent patterns and the changes in speckle contrast as a function of time were obtained from six repeated measurements. The speckle contrasts obtained from the bottom surface with 100 mW cm(-1) were smaller than those than the other power densities. The higher power densities provided the higher shrinkage.

Femtosecond laser ablation on dental hard tissues-Analysis of ablated profile near an interface using local effective intensity

This study evaluated the process of ablation produced by a Ti:Sapphire femtosecond laser under different average powers taking place at the enamel/dentin interface. Based on the geometry of ablated microcavities the effective intensity for ablation was obtained. This study shows the validity for the local effective intensity analysis and allows a quantification of the variation in the ablation geometry taking place at the interface of two naturally different materials. It shows that the variation of the diameter of the ablated region as a function of the cavity depth comes essentially from a mechanism of effective intensity attenuation, as a result of a series of complex effects. Additionally, our data are sufficient to predict that a discontinuity on the ablation profile will occur on the interface between two biological media: enamel-dentin, showing a suddenly jump on the ablated cavity dimensions.

Reporting Iraq's cosmopolitan society in the Australian print media : The case of the Assyrian church bombings

A series of bomb blasts that targeted a number of Assyrian churches in Baghdad and Mosul last year were reported in the Australian media and seemed to hint at the complexity of Iraq’s cosmopolitan society. This paper seeks to compare and contrast the representation of these events in four of Australia’s leading newspapers (The Australian, The Courier-Mail, The Age and The Sydney Morning Herald) by using a multi-methodological approach. The analysis reveals that Australian print coverage falls short of detailing the complexities of Iraq’s cosmopolitan society and therefore engenders an Orientalist (Said, 1978) discourse that constructs the Assyrians as powerless and anonymous victims.