Tailoring microstructure and physical properties of poly(vinylidene fluoride–hexafluoropropylene) porous films

This paper presents a systematic study for the production of poly(vinylidene fluoride-hexafluoropropylene), P(VDF-HFP), porous films using solvent evaporation (SE) and non-solvent induced phase separation (NIPS) techniques. Parameters such as volume fraction of the copolymer solution, film thickness, time exposure to air, non-solvent and temperature of the coagulation bath were investigated on the morphology, crystallization and mechanical properties of the samples. Films with different porous morphologies including homogeneous pore sizes, macrovoids and spherulites were obtained depending on the processing conditions, which in turn affect the wettability and mechanical properties of the material. Knowing that the phase content of the films also depends on the processing conditions, this paper shows that P(VDF-HFP) films with tailored porous morphology, electroactive phase content, hydrophobicity, cristallinity and mechanical properties can be achieved for a specific application using the adequate SE and NIPS techniques conditions.

Tailoring poly(vinylidene fluoride-co-chlorotrifluoroethylene) microstructure and physicochemical properties by exploring its binary phase diagram with dimethylformamide

Poly(vinylidene fluoride-co-chlorotrifluoroethylene), PVDF-CTFE, membranes were prepared by solven casting from dimethylformamide, DMF. The preparation conditions involved a systematic variation of polymer/solvent ratio and solvent evaporation temperature. The microstructural variations of the PVDF-CTFE membranes depend on the different regions of the PVDF-CTFE/DMF phase diagram, explained by the Flory-Huggins theory. The effect of the polymer/solvent ratio and solvent evaporation temperature on the morphology, degree of porosity, β-phase content, degree of crystallinity, mechanical, dielectric and piezoelectric properties of the PVDF-CTFE polymer were evaluated. In this binary system, the porous microstructure is attributed to a spinodal decomposition of the liquid-liquid phase separation. For a given polymer/solvent ratio, 20 wt%, and higher evaporation solvent temperature, the β-phase content is around 82% and the piezoelectric coefficient, d33, is - 4 pC/N.

Poly(vinylidene fluoride-trifluoroethylene) porous films: tailoring microstructure and physical properties by solvent casting strategies

A systematic study for the production of porous poly(vinylidene fluoride-trifluoroethylene), P(VDF-TrFE), films using solvent evaporation and non-solvent induced phase separation techniques is presented. Processing parameters such as copolymer volume fraction, solvent, preset exposure time to air before immersion, and non-solvent and temperature of the coagulation bath were varied and the corresponding sample morphology, hydrophobicity, thermal and mechanical properties were determined. Film morphologies including homogeneous pore distributions, micropores, microvoids, spherulites and non-porous films were obtained. The morphology variations strongly influence sample hydrophobicity and mechanical properties. All samples crystallize in the electroactive β-phase with a degree of crystallinity around 30 %.

Hand gesture recognition system based in computer vision and machine learning: Applications on human-machine interaction

Tese de Doutoramento em Engenharia de Eletrónica e de Computadores

Digital literacy, technology and social inclusion: making sense of one-to-one computer programmes around the world

This book was produced in the scope of a research project entitled “Navigating with ‘Magalhães’: Study on the Impact of Digital Media in Schoolchildren”. This study was conducted between May 2010 and May 2013 at the Communication and Society Research Centre, University of Minho, Portugal and it was funded by the Portuguese Foundation for Science and Technology (PTDC/CCI-COM/101381/2008).

Foreword [to Digital literacy, technology and social inclusion: making sense of one-to-one computer programmes around the world]

(Excerto) In times past, learning to read, write and do arithmetic was to get on course to earn the “writ of emancipation” in society. These skills are still essential today, but are not enough to live in society. Reading and critically understanding the world we live in, with all its complexity, difficulties and challenges, require not only other skills (learning to search for and validate information, reading with new codes and grammar, etc) but, to a certain extent, also metaskills, matrixes and mechanisms that are transversal to the different and new literacies, are necessary. They are needed not just to interpret but equally to communicate and participate in the little worlds that make up our everyday activities as well as, in a broader sense, in the world of the polis, which today is a global world.

Introduction [to Digital literacy, technology and social inclusion: making sense of one-to-one computer programmes around the world]

This book was produced in the scope of a research project entitled “Navigating with ‘Magalhães’: Study on the Impact of Digital Media in Schoolchildren”. This study was conducted between May 2010 and May 2013 at the Communication and Society Research Centre, University of Minho, Portugal and it was funded by the Portuguese Foundation for Science and Technology (PTDC/CCI-COM/101381/2008). As we shall explain in more detail later in this book, the main objective of that research project was to analyse the impact of the Portuguese government programme named ´e-escolinha´ launched in 2008 within the Technological Plan for Education. This Plan responds to the principles of the Lisbon Strategy signed in 2000 and rereleased in the Spring European Council of 2005.

A 3D computer assisted Orthopedic Surgery Planning approach based on planar radiography

Dissertação de mestrado integrado em Engenharia Biomédica (área de especialização em Informática Médica)

Computer integrated testing for the transport refrigeration systems industry.

This is a study of a state of the art implementation of a new computer integrated testing (CIT) facility within a company that designs and manufactures transport refrigeration systems. The aim was to use state of the art hardware, software and planning procedures in the design and implementation of three CIT systems. Typical CIT system components include data acquisition (DAQ) equipment, application and analysis software, communication devices, computer-based instrumentation and computer technology. It is shown that the introduction of computer technology into the area of testing can have a major effect on such issues as efficiency, flexibility, data accuracy, test quality, data integrity and much more. Findings reaffirm how the overall area of computer integration continues to benefit any organisation, but with more recent advances in computer technology, communication methods and software capabilities, less expensive more sophisticated test solutions are now possible. This allows more organisations to benefit from the many advantages associated with CIT. Examples of computer integration test set-ups and the benefits associated with computer integration have been discussed.

Supportive presentation for computer games

Supportive presentation, computer games, non-photorealistic rendering camera control, camera AI, human factors, user interfaces, action summary, action replay, non-photorealistic rendering case studies, psychology

Frame-coherent 3D stippling for non-photorealistic computer graphics

Stipping, non-photorealistic rendering, non-photorealistic computer graphics

Embedding metadata in computer graphics for interaction

Illustration Watermarks, Image annotation, Virtual data exploration, Interaction techniques

Children, computer and creativity : usability guidelines for designing a game authoring tool for children

Magdeburg, Univ., Fak. für Informatik, Diss., 2009

Virtual Reality zur Untersuchung neuronaler Prozesse : Entwicklung und Validierung einer adaptiven Hirn-Computer-Schnittstelle zur dynamischen Interaktion mit Virtual Reality Paradigmen

Magdeburg, Univ., Fak. für Informatik, Diss., 2013