Reducing residual amplitude modulation in electro-optic phase modulators by erasing photorefractive scatter

Residual amplitude modulation (RAM) is an unwanted noise source in electro-optic phase modulators. The analysis presented shows that while the magnitude of the RAM produced by a MgO:LiNbO3 modulator increases with intensity, its associated phase becomes less well defined. This combination results in temporal fluctuations in RAM that increase with intensity. This behaviour is explained by the presented phenomenological model based on gradually evolving photorefractive scattering centres randomly distributed throughout the optically thick medium. This understanding is exploited to show that RAM can be reduced to below the 10-5 level by introducing an intense optical beam to erase the photorefractive scatter.

Form prevailing over substance?

The decision of the Court of Appeal in Kellas-Sharpe v PSAL Ltd [2012] QCA 371 considered a not unusual provision in a loan agreement, being a provision whereby a lender agrees to accept a lower or concessional rate of interest in circumstances of prompt payment by the borrower. The loan agreement in question provided for the borrower to pay a standard rate of interest of 7.5% per month. However, if the borrower was not in default, the lender agreed to accept interest at a concessional rate of interest of 4% per month. The issue for determination by the Court of Appeal (McMurdo P, Gotterson JA and Fryberg J) was whether the clause was subject to the equitable jurisdiction to relieve against penalties, and, if so, if the interest rate provision should be treated as a penalty making the interest rate provision void. In mounting this argument, the borrower was seeking to overturn a long line of authority which has repeatedly upheld the semantic distinction between an increase in the rate of interest (which attracts the doctrine concerning penalties) and an incentive to the borrower by way of a reduction in the interest rate for prompt payment (which does not attract the doctrine)...

Very sensitive fiber Bragg grating accelerometer using transverse forces with an easy over-range protection and low cross axial sensitivity

The first fiber Bragg grating (FBG) accelerometer using direct transverse forces is demonstrated by fixing the FBG by its two ends and placing a transversely moving inertial object at its middle. It is very sensitive because a lightly stretched FBG is more sensitive to transverse forces than axial forces. Its resonant frequency and static sensitivity are analyzed by the classic spring-mass theory, assuming the axial force changes little. The experiments show that the theory can be modified for cases where the assumption does not hold. The resonant frequency can be modified by a linear relationship experimentally achieved, and the static sensitivity by an alternative method proposed. The principles of the over-range protection and low cross axial sensitivity are achieved by limiting the movement of the FBG and were validated experimentally. The sensitivities 1.333 and 0.634 nm/g were experimentally achieved by 5.29 and 2.83 gram inertial objects at 10 Hz from 0.1 to 0.4 g (g = 9.8 m/s 2), respectively, and their resonant frequencies were around 25 Hz. Their theoretical static sensitivities and resonant frequencies found by the modifications are 1.188 nm/g and 26.81 Hz for the 5.29 gram one and 0.784 nm/g and 29.04 Hz for the 2.83 gram one, respectively.

Cascaded DC-DC converter connection of photovoltaic modules

New residential scale photovoltaic (PV) arrays are commonly connected to the grid by a single dc-ac inverter connected to a series string of pv panels, or many small dc-ac inverters which connect one or two panels directly to the ac grid. This paper proposes an alternative topology of nonisolated per-panel dc-dc converters connected in series to create a high voltage string connected to a simplified dc-ac inverter. This offers the advantages of a "converter-per-panel" approach without the cost or efficiency penalties of individual dc-ac grid connected inverters. Buck, boost, buck-boost, and Cu´k converters are considered as possible dc-dc converters that can be cascaded. Matlab simulations are used to compare the efficiency of each topology as well as evaluating the benefits of increasing cost and complexity. The buck and then boost converters are shown to be the most efficient topologies for a given cost, with the buck best suited for long strings and the boost for short strings. While flexible in voltage ranges, buck-boost, and Cu´k converters are always at an efficiency or alternatively cost disadvantage.

Prevalence and characteristics of Indigenous drink-driving convictions in Queensland, Australia

Alcohol-involved accidents are one of the leading contributors towards high injury rates among Indigenous Australians. However, there is limited information available to inform existing policies to change current rates. The study aims to provide information about the prevalence and the characteristics of such behaviour. Drink driving convictions from 2006-2010 were extracted from the Queensland Department of Justice and Attorney General database. Convictions were regrouped by gender, age, Accessibility/Remoteness Index of Australia classification (using court location) and sentence severity. A number of cross tabulations were carried out to identify relationships between variables. Standardised adjusted residuals were calculated for each cell in order to determine cell differences that contributed to the chi-square test results. Analysis revealed there were 9,323 convictions, of which the majority were for offences by males (77.5%). In relation to age, 52.6% of the convictions were of persons under 25 years of age. Age was significantly different across the five regions for males only (χ2=90.8, p<0.001), with a larger number of convictions in the ‘very remote’ region of persons over 40+ years of age. Increased remoteness was linked with high range BAC convictions for both males (χ2=168.4, p<0.001) and females (χ2=22.5, p=0.004). Monetary penalties were the primary sentence received for both males and females in all regions. The findings identify the Indigenous drink driving conviction rate to be 6 times that of the general Queensland rate and indicate that a multipronged approach is needed, with tailored strategies for remote offenders, young adults and offenders with alcohol misuse and dependency issues. Further attention is warranted in this area of road safety.

Optical data encryption using time-dependent dynamics of refractive index changes in LiNbO3

We present a method for optical encryption of information, based on the time-dependent dynamics of writing and erasure of refractive index changes in a bulk lithium niobate medium. Information is written into the photorefractive crystal with a spatially amplitude modulated laser beam which when overexposed significantly degrades the stored data making it unrecognizable. We show that the degradation can be reversed and that a one-to-one relationship exists between the degradation and recovery rates. It is shown that this simple relationship can be used to determine the erasure time required for decrypting the scrambled index patterns. In addition, this method could be used as a straightforward general technique for determining characteristic writing and erasure rates in photorefractive media.

Cascaded DC-DC converter connection of photovoltaic modules

New residential scale photovoltaic (PV) arrays are commonly connected to the grid by a single DC-AC inverter connected to a series string of PV modules, or many small DC-AC inverters which connect one or two modules directly to the AC grid. This paper shows that a "converter-per-module" approach offers many advantages including individual module maximum power point tracking, which gives great flexibility in module layout, replacement, and insensitivity to shading; better protection of PV sources, and redundancy in the case of source or converter failure; easier and safer installation and maintenance; and better data gathering. Simple nonisolated per-module DC-DC converters can be series connected to create a high voltage string connected to a simplified DC-AC inverter. These advantages are available without the cost or efficiency penalties of individual DC-AC grid connected inverters. Buck, boost, buck-boost and Cuk converters are possible cascadable converters. The boost converter is best if a significant step up is required, such as with a short string of 12 PV modules. A string of buck converters requires many more modules, but can always deliver any combination of module power. The buck converter is the most efficient topology for a given cost. While flexible in voltage ranges, buck-boost and Cuk converters are always at an efficiency or alternatively cost disadvantage

The significance of owner participation for a successful detached housing development in Malaysia

The detached housing scheme is a unique and exclusive segment of the residential property market in Malaysia. Generally, the product is expensive and for many Malaysians who can afford them, owning a detached house is a once in a lifetime opportunity. In spite of this, most of the owners failed to fully comprehend the specific need of this type of housing scheme, increasing the risk of it being a problematic undertaking. Unlike other types of pre-designed "mass housing" schemes, the detached housing scheme may be built specifically to cater the needs and demands of its owner. Therefore, owner participation during critical development stages is vital to guarantee the success of the development as a whole. In addition, due to its unique design the house would have to individually comply with the requirements and regulations of relevant authorities. Failure by the owner to recognise this will result in delays, penalties, disputes and ultimately cost overruns. These circumstances highlight the need for a research to guide the owner through participation during the critical development stages of a detached house. Therefore, this research aims to develop a guideline to improve owner participation for a successful detached house development in Malaysia. To achieve the aim, questionnaire surveys and semi-structured interviews were employed to collect the detached house owners' and consultants' & contractors' responses through their experiences in developing detached houses in Malaysia. Stratified and random sampling were utilised to gather information from both parties to represent Malaysian detached house participants. The questionnaire responses were analysed through the application of quantitative analysis such as descriptive analysis, factor analysis and structural equation modelling which were substantiated through qualitative analysis procedure such as content analysis. This research had identified that in order to produce a successful outcome detached house owners are required to participate during critical stages of the development. In the planning stage, the owner needs to provide proper specific input to the consultant regarding his/her expectations of the cost for the entire development, its detailed specification and general idea of the internal and external design of the detached house and its compound. In the contracting stage, the owner must make the appropriate choice of selecting the right contractor for the job. This decision may be taken after recommendations from the consultants or from the owner's personal contacts or experiences but it is not recommended for the owner to select a contractor primarily on the basis of the lowest bid. In the completion stage, the owner may need to attend a number of important site meetings to ensure that the progress of the works is according to what had been planned and the completion date is achievable. By having the owners undertake an active role during critical stages of the development, not only the quality and delivery of the development improved but also there is an increase in satisfaction to the owners themselves.

Alcohol-related driving offences, crashes, and traffic policing strategies in Zhejiang Province, China

Context Alcohol-related traffic offences and associated trauma have attracted attention in China in recent years, culminating in changes to national legislation in May 2011. Harsher penalties were introduced, particularly for offences where blood alcohol concentration (BAC) levels above 80mg/100mL are recorded. Deemed to be drunk under the law, this is now a criminal offence attracting penalties including large monetary fines, licence suspension for 5 years and imprisonment. Objective This paper outlines key statistics about alcohol-related road trauma in Zhejiang Province and strategies used to combat drink- and drunk-driving. Key Outcomes Zhejiang Province, in China’s south east, has a population of approximately 54, 426,000; 22.36% hold a driving licence. Rapid motorisation is occurring there. In 2011, 1,383,318 new licences were issued, representing a 16.78% increase from the previous year. In 2012, there were a total of 65,000 police officers throughout the Province, 12,307 of whom (18.9%) were traffic police. Responsibility for conducting alcohol testing is the responsibility of all traffic police. The number of alcohol breath tests conducted per year was not available. However, traffic police are actively enforcing alcohol-related laws. In 2011, 89,228 drivers were charged with drink-driving (DUI;20-80mg/100 mL) and 10,014 with the more serious drunk-driving offence (DWI;>80mg/100mL) (Zhejiang Traffic Management Department, 2012). These numbers decreased from the previous year (221,262 and 26,390 respectively). For all crashes recorded in 2011 (n=20,176), 2% involved alcohol-impaired road users. Information on the role of alcohol in crashes from previous years was not available. Discussion Various strategies are employed to detect alcohol-impaired drivers including: targeting vehicles from hotels/restaurants; using sense of smell to screen drivers for further testing; passive alcohol sensors to test drivers; and blood tests for crash-involved drivers where a fatality occurred. Although resources to promote road safety are limited, various government initiatives promote awareness of the dangers of alcohol-related driving and more are needed in future.

What makes juvenile offenders different from adult offenders?

Historically, children in criminal justice proceedings were treated much the same as adults and subject to the same criminal justice processes as adults. Until the early twentieth century, children in Australia were even subjected to the same penalties as adults, including hard labour and corporal and capital punishment (Carrington & Pereira 2009). Until the mid-nineteenth century, there was no separate category of ’juvenile offender’ in Western legal systems and children as young as six years of age were incarcerated in Australian prisons (Cunneen & White 2007). It is widely acknowledged today, however, both in Australia and internationally, that juveniles should be subject to a system of criminal justice that is separate from the adult system and that recognises their inexperience and immaturity. As such, juveniles are typically dealt with separately from adults and treated less harshly than their adult counterparts. The United Nations’ (1985: 2) Standard Minimum Rules for the Administration of Juvenile Justice (the ‘Beijing Rules’) stress the importance of nations establishing a set of laws, rules and provisions specifically applicable to juvenile offenders and institutions and bodies entrusted with the functions of the administration of juvenile justice and designed to meet the varying needs of juvenile offenders, while protecting their basic rights. In each Australian jurisdiction, except Queensland, a juvenile is defined as a person aged between 10 and 17 years of age, inclusive. In Queensland, a juvenile is defined as a person aged between 10 and 16 years, inclusive. In all jurisdictions, the minimum age of criminal responsibility is 10 years. That is, children under 10 years of age cannot be held legally responsible for their actions.

Effective punishment experiences : the need for a more comprehensive approach to conceptualising behavioural punishers and reinforcers in a road safety context

Determining what consequences are likely to serve as effective punishment for any given behaviour is a complex task. This chapter focuses specifically on illegal road user behaviours and the mechanisms used to punish and deter them. Traffic law enforcement has traditionally used the threat and/or receipt of legal sanctions and penalties to deter illegal and risky behaviours. This process represents the use of positive punishment, one of the key behaviour modification mechanisms. Behaviour modification principles describe four types of reinforcers: positive and negative punishments and positive and negative reinforcements. The terms ‘positive’ and ‘negative’ are not used in an evaluative sense here. Rather, they represent the presence (positive) or absence (negative) of stimuli to promote behaviour change. Punishments aim to inhibit behaviour and reinforcements aim to encourage it. This chapter describes a variety of punishments and reinforcements that have been and could be used to modify illegal road user behaviours. In doing so, it draws on several theoretical perspectives that have defined behavioural reinforcement and punishment in different ways. Historically, the main theoretical approach used to deter risky road use has been classical deterrence theory which has focussed on the perceived certainty, severity and swiftness of penalties. Stafford and Warr (1993) extended the traditional deterrence principles to include the positive reinforcement concept of punishment avoidance. Evidence of the association between punishment avoidance experiences and behaviour has been established for a number of risky road user behaviours including drink driving, unlicensed driving, and speeding. We chose a novel way of assessing punishment avoidance by specifying two sub-constructs (detection evasion and punishment evasion). Another theorist, Akers, described the idea of competing reinforcers, termed differential reinforcement, within social learning theory (1977). Differential reinforcement describes a balance of reinforcements and punishments as influential on behaviour. This chapter describes comprehensive way of conceptualising a broad range of reinforcement and punishment concepts, consistent with Akers’ differential reinforcement concept, within a behaviour modification framework that incorporates deterrence principles. The efficacy of three theoretical perspectives to explain self-reported speeding among a sample of 833 Australian car drivers was examined. Results demonstrated that a broad range of variables predicted speeding including personal experiences of evading detection and punishment for speeding, intrinsic sensations, practical benefits expected from speeding, and an absence of punishing effects from being caught. Not surprisingly, being younger was also significantly related to more frequent speeding, although in a regression analysis, gender did not retain a significant influence once all punishment and reinforcement variables were entered. The implications for speed management, as well as road user behaviour modification more generally, are discussed in light of these findings. Overall, the findings reported in this chapter suggest that a more comprehensive approach is required to manage the behaviour of road users which does not rely solely on traditional legal penalties and sanctions.

Lexis Nexis Questions and Answers : Equity and Trusts [4th Ed.]

"LexisNexis Questions and Answers: Equity and Trusts provides students with a clear and systematic approach to successfully analysing and answering assessment questions on equity and trusts. Each chapter commences with a discussion of key principles and issues including a summary of relevant leading cases and legislation for effective revision. Examples of written questions with fact scenarios follow, each with a suggested answer plan, sample answer and comments on how the answer might be viewed by an examiner. Readers are provided with advice on common errors to avoid when answering questions and practical hints and tips on how to achieve higher marks. Features • Summary of key issues helps students revise key areas before attempting problem questions • Sample questions with model answers assist students with effective exam study preparation"--publisher website

Developing a Libyan information privacy framework

This thesis considers how an information privacy system can and should develop in Libya. Currently, no information privacy system exists in Libya to protect individuals when their data is processed. This research reviews the main features of privacy law in several key jurisdictions in light of Libya's social, cultural, and economic context. The thesis identifies the basic principles that a Libyan privacy law must consider, including issues of scope, exceptions, principles, remedies, penalties, and the establishment of a legitimate data protection authority. This thesis concludes that Libya should adopt a strong information privacy law framework and highlights some of the considerations that will be relevant for the Libyan legislature.

Road safety knowledge exchange and capacity building between China and Australia

Road traffic injuries are one of the major public health burdens worldwide. The United Nations Decade of Action for Road Safety (2011-2020) implores all nations to work to reduce this burden. This decade represents a unique and historic period of time in the field of road safety. Information exchange and co-operation between nations is an important step in achieving the goal. The burden of road crashes, fatalities and injuries is not equally distributed. We know that low and middle-income countries experience the majority of the road trauma burden. Therefore it is imperative that these countries learn from the successes of others that have developed and implemented road safety laws, public education campaigns and countermeasures over many years and have achieved significant road trauma reductions as a result. China is one of the countries experiencing a large road trauma burden. Vulnerable road users such as pedestrians and cyclists make up a large proportion of fatalities and injuries in China. Speeding, impaired/drug driving, distracted driving, vehicle overloading, inadequate road infrastructure, limited use of safety restraints and helmets, and limited road safety training have all been identified as contributing to the problem. Some important steps have been taken to strengthen China’s approach, including increased penalties for drunk driving in May 2011 and increased attention to school bus safety in 2011/12. However, there is still a large amount of work needed to improve the current road safety position in China. This paper provides details of a program to assist with road safety knowledge exchange between China and Australia that was funded by the Australian Government which was undertaken in the latter part of 2012. The four month program provided the opportunity for the first author to work closely with key agencies in Australia that are responsible for policy development and implementation of a broad range of road safety initiatives. In doing so, an in-depth understanding was gained about key road safety strategies in Australia and processes for developing and implementing them. Insights were also gained into the mechanisms used for road safety policy development, implementation and evaluation in several Australian jurisdictions. Road traffic law and enforcement issues were explored with the relevant jurisdictional transport and police agencies to provide a greater understanding of how Chinese laws and practices could be enhanced. Working with agencies responsible for public education and awareness campaigns about road safety in Australia also provided relevant information about how to promote road safety at the broader community level in China. Finally, the program provided opportunities to work closely with several world-renowned Australian research centres and key expert researchers to enhance opportunities for ongoing road safety research in China. The overall program provided the opportunity for the first author to develop knowledge in key areas of road safety strategy development, implementation and management which are directly relevant to the current situation in China. This paper describes some main observations and findings from participation in the program.

Enhancement of optical absorption in thin-film solar cells through the excitation of higher-order nanoparticle plasmon modes

Recent research in the rapidly emerging field of plasmonics has shown the potential to significantly enhance light trapping inside thin-film solar cells by using metallic nanoparticles. In this article it is demonstrated the plasmon enhancement of optical absorption in amorphous silicon solar cells by using silver nanoparticles. Based on the analysis of the higher-order surface plasmon modes, it is shown how spectral positions of the surface plasmons affect the plasmonic enhancement of thin-film solar cells. By using the predictive 3D modeling, we investigate the effect of the higher-order modes on that enhancement. Finally, we suggest how to maximize the light trapping and optical absorption in the thin-film cell by optimizing the nanoparticle array parameters, which in turn can be used to fine tune the corresponding surface plasmon modes.