Fluctuation characteristics of arc voltage and jet flow in a non-transferred dc plasma generated at reduced pressure

A torch with a set of inter-electrode inserts between the cathode and the anode/nozzle with a wide nozzle exit was designed to generate plasma jets at chamber pressures of 500–10 000 Pa. The variation of the arc voltage was examined with the change in working parameters such as gas flow rate and chamber pressure. The fluctuation in the arc voltage was recorded with an oscilloscope, and the plasma jet fluctuation near the torch exit was observed with a high-speed video camera and detected with a double-electrostatic probe. Results show that the 300 Hz wave originated from the tri-phase rectified power supply was always detected under all generating conditions. Helmholtz oscillations over 3000 Hz was detected superposed on the 300 Hz wave at gas flow rates higher than 8.8 slm with a peak to valley amplitude lower than 5% of the average voltage value. No appreciable voltage fluctuation caused by the irregular arc root movement is detected, and mechanisms for the arc voltage and jet flow fluctuations are discussed.

The formation mechanism of low leaching glassy slag during plasma arc vitrification treatment of fly ash

In this paper, the glass formation theory is applied to study the formation mechanism of the low leaching glassy slag during the process of plasma waste treatment. The research shows that SiO2 acts as network former to form a 3-dimensional Si-O tetrahedral network in which heavy metals are bonded or encapsulated, so the Si-O tetrahedron protect heavy metals against leaching from the vitrified slag or acid corrosion. For given chemical compositions of waste, the formation ability of the vitrified slag can be represented by the ratio of the whole oxygen ions to the whole network former ions in glass (O/Si) which is appropriate in the range of 2~3. A plasma arc reactor is used to conduct the vitrification experiments of two kinds of fly ashes with additives in which effects of various parameters including arc power, cooling speed, treatment temperature are studied. The chemical compositions of fly ashes are analyzed by X-ray fluorescence (XRF) spectrometry. The experimental results show that both cooling speed and O/Si have important influence on the formation of the vitrified slag, which is qualitatively in accordance with the predictions of the glass formation theory.

THE FORMATION MECHANISM OF THE VITRIFIED SLAG IN A PLASMA ARC REACTOR FOR HAZARDOUS WASTE TREATMENT

Various hazardous wastes with additives have been vitrified to investigate the formation mechanism of the glassy slag by a 30 kW DC plasma-arc reactor developed by the Institute of Mechanics, Chinese Academy of Sciences. The average temperature in the reaction area is controlled at 1500°C. The chemical compositions of three sorts of fly ashes are analyzed by XRF (X-Ray Fluorescence). Fly ashes with vitrifying additives can be vitrified to form glassy slag, which show that the ratio of the whole oxygen ions to the whole network former ions in glass (R) is appropriate in the range of 2~3 to form durable vitrified slag. In this experiment, the arc power is controlled below 5 kW to inhibit waste evaporation. To enhance the effects of heat transfer to wastes, ferrous powder has been added into the graphite crucible, which aggregates as ingot below the molten silicate after vitrification. The slag fails to form glass if the quenching rate is less than 1 K/min. Therefore, the slag will break into small chips due to the sharp quenching rate, which is more than 100 K/sec.

Development of arc root attachment in the nozzle of 1 kW N2 and H2-N2 arcjet thrusters

Arc root behavior affects the energy transfer and nozzle erosion in an arcjet thruster. To investigate the development of arc root attachment in 1 kW class N2 and H2-N2 arcjet thrusters from the time of ignition to the stably working condition, a kinetic series of end-on view images of the nozzle obtained by a high-speed video camera was analyzed. The addition of hydrogen leads to higher arc voltage levels and the determining factor for the mode of arc root attachment was found to be the nozzle temperature. At lower nozzle temperatures, constricted type attachment with unstable motions of the arc root was observed, while a fully diffused and stable arc root was observed at elevated nozzle temperatures.

A small arc-heated plasma testing facility for thermal protection materials

Experimental research on a 150 kW arc-heated plasma testing facility was conducted. Stable plasma jets with different gas compositions, temperatures and velocities were obtained at chamber pressure between 400 Pa – 100 kPa. Stagnation ablation experiments were conducted on samples of typical super alloys used for thermal protection systems. The microstructure and hardness of alloys before and after ablation were compared.

An investigation of various types of arc welded joints

In the last few years there has been much discussion as to the relative merits or arc welded joints as compared to riveted joints. There is an old precedent which must be removed before arc welding will come into its own. The purpose of this paper is to help establish confidence in this process of fabrication with special regard to strength and reliability.

A short thesis on arc-welding

During the past few years the attention of architects, engineers and others encased in or connected with the building industry has been attracted to the possibilities of the application of welding processes to the joining of structural members. As oxy-acetylene welding was developed before electric arc welding became perfected it was only natural that the gas torch should be first considered. It developed however on examination of the two processes that while acetylene welding gave better results in most cases it was only in the hands of experts that it could consistently outscore the arc as a welding medium. Arc-welding has the advantage over the acetylene process, where each individual operator must use his own judgement as to the proper flame, in that a squad of arc-welders can work under the direction of a single expert supervisor who accepts the responsibility of fixing the current value and of determining the proper size of welding rod to be used on any given type of work.

SYSTEMATICS OF GROUNDWATER OLIGOCHAETES (ANNELIDA, CLITELLATA) IN KARSTIC AREAS OF THE CANTABRIAN REGION/ ERREGIO KANTAURIARREKO EREMU KARSTIKOETAN DAUDEN LURPEKO OLIGOKETO (ANNELIDA, CLITELLATA) URT

This thesis deals with the oligochaete taxa (Annelida, Clitellata) from several karst units in the Cantabrian region, northern Iberian Peninsula. Groundwater oligochaetes are still poorly known fauna and the area seems to be a promising hotspot for groundwater taxa. Metodology is based on both morphological and molecular analyses. More than 7,000 specimens were collected from five karst units and >60 taxa were identified. Stygobiont oligochaete fauna in the northern Iberian Peninsula is diverse and mostly endemic (range areas <300 km). Three new stygogiont oligochaete species are described: Gianius navarroi Rodriguez & Achurra, 2010, Isochaetides gianii Rodriguez & Achurra, 2010 and Troglodrilus jugeti Achurra et al., 2012; and another four new taxa will be described in the near future. Taxonomic remarks on Lophochaeta ignota Stolc, 1886 and Troglodrilus galarzai (Giani & Rodriguez, 1988) are provided. The controversial separation of L. ignota and Heterochaeta costata Claparède, 1863 from Tubifex Lamarck, 1816 is corroborated by mitochondrial molecular data. Following the DNA barcoding method, individuals of the stygoxene species Stylodrilus heringianus Claparède, 1862 from different geographic areas are shown to represent a single metapopulation. The first phylogenetic analysis of the subfamily Tubificinae based on molecular data is attemped, which although incompletely resolved, evidences for the first time a close relationship between a stygobiont oligochaete (Troglodrilus Juget et al. 2006) and an estuarine especies (Heterochaeta costata Claparéde, 1863). A marine ancestor is hypothesised for Troglodrilus. Finally, Ereñozar karst unit (Biscay) is suggested to be a hotspot for groundwater oligochaetes (11 stygobiont taxa, of which 4 are endemic to the karst unit) and several biodiversity indices (Species richness, Rarity, Vulnerability and Complementarity) are shown to be useful tools for conservation management of groundwater habitats in that karst area.

Modelization and analysis of the electric arc in low voltage circuit breakers

246 p.

Two new species of Zospeum Bourguignat, 1856 from the Basque-Cantabrian Mountains, Northern Spain (Eupulmonata, Ellobioidea, Carychiidae)

Two new species of the genus Zospeum Bourguignat, 1856 are described from caves in the Sierra de Aitzgorri (Gipuzkoa) and the Sierra Salvada (Burgos) in Northern Spain. The taxa Z. vasconicum sp. n. and Z. zaldivarae sp. n. have recently, without a formal name, been included in a molecular study of worldwide members of the Carychiidae. In the present paper, the shell morphology and variation of these species is described and illustrated.