The geopolitical economy of social policy in the Philippines: securitisation, emerging powers and multilateral policies

Recent geopolitical and economic changes have altered global social policy formation. Bretton Woods multilateral development agencies (MDAs) have selectively incorporated ideas that have emerged from developing country states and decision makers. Recent years have witnessed an increased acceptance of social transfers as part of renewed efforts at poverty alleviation policies based on social risk management. There has been an instance in the use and promotion of conditional cash transfer (CCT) policies by MDAs. One case is the Philippines. CCTs were a product of the emergence of a neostructuralist welfare regime (understood as an ideal type) in Latin America. There was an attempt to reconcile neoliberal strategies of development with aspirations for guaranteed minimum incomes. The Bretton Woods and regional development bank MDAs have facilitated the adoption of CCTs in other developing country contexts. In the Philippines, a combination of actions by national political actors and MDAs resulted in the implementation of a securitised and compliance-focused version of CCTs derived from the Colombian security state. Although poor households welcome income assistance, CCTs have acted to enforce further state monitoring without altering the national-based political and economic processes that replicate poverty.

Effect of cooling rate on phase transformations in a high-strength low-alloy steel studied from the liquid phase

The phase transformation and precipitation in a high-strength low-alloy steel have been studied over a large range of cooling rates, and a continuous cooling transformation (CCT) diagram has been produced. These experiments are unique because the measurements were made from samples cooled directly from the melt, rather than in homogenized and re-heated billets. The purpose of this experimental design was to examine conditions pertinent to direct strip casting. At the highest cooling rates which simulate strip casting, the microstructure was fully bainitic with small regions of pearlite. At lower cooling rates, the fraction of polygonal ferrite increased and the pearlite regions became larger. The CCT diagram and the microstructural analysis showed that the precipitation of NbC is suppressed at high cooling rates, and is likely to be incomplete at intermediate cooling rates.

A decentralised multi-agent approach to enhance the stability of smart microgrids with renewable energy

This paper presents the impact of large penetration of wind power on the transient stability through a dynamic evaluation of the critical clearing times (CCTs) by using intelligent agent-based approach. A decentralised multi-agent-based framework is developed, where agents represent a number of physical device models to form a complex infrastructure for computation and communication. They enable the dynamic flow of information and energy for the interaction between the physical processes and their activities. These agents dynamically adapt online measurements and use the CCT information for relay coordination to improve the transient stability of power systems. Simulations are carried out on a smart microgrid system for faults at increasing wind power penetration levels and the improvement in transient stability using the proposed agent-based framework is demonstrated.

Interações econômicas entre capital humano e fecundidade

O primeiro artigo desta tese procura medir o impacto do programa Bolsa Familia sobre a gravidez juvenil, discutindo também a utilização de programas de transferência condicional de renda para a diminuição da fecundidade em áreas de pobreza. O segundo artigo realiza um exercício contrafactual para estimar o impacto de aumentos no investimento em educação sobre o consumo, considerando não só o aumento da produtividade, mas também o impacto da nova educação sobre a fecundidade das pessoas.

Dimensionamento de sistema de corte, carregamento e transporte do eucalipto

O objetivo deste trabalho foi dimensionar o sistema de corte, carregamento e transporte do eucalipto (CCT) para uma empresa florestal localizada no Oeste Baiano com a finalidade de processar a madeira para queima como biomassa. O sistema considerado foi o chamado “Americano”, que conta com o feller-buncher (corte), o skidder (arraste), o processador florestal (processamento), o carregador florestal (carregamento e descarregamento) e o caminhão (transporte). Os custos encontrados nos equipamentos envolvidos neste processo foram somados, visando-se identificar o módulo padrão, representado pelo conjunto com a maior produtividade e o menor custo, obtendo-se, desta forma, a maior margem sobre o valor da venda da madeira. Os resultados encontrados indicam que o custo de CCT, a partir do módulo padrão de processamento de madeira de 40.000 m3/mês, oscilou entre 26,60% e 34,36% do valor da madeira entregue ao cliente final, dependendo da região onde a mesma é comercializada. Dessa forma, os resultados encontram-se em níveis médios sugeridos pela literatura. Outro ponto que reforça a importância de se analisar estes custos operacionais, é que entre 65,64% e 74,40% do custo de venda da madeira entregue foi formado no período de 5 a 7 anos (prazo de crescimento médio de uma árvore de eucalipto, dependendo da finalidade da utilização da madeira), enquanto que a diferença é formada em apenas 60 dias, prazo este correspondente ao corte, carregamento e transporte desta madeira até o cliente final. Foi feita a análise de sensibilidade das principais variáveis identificadas. Os resultados revelaram que a distância percorrida de ida e volta para entregar a madeira ao cliente final foi a variável que mais impactou na oscilação do custo final do CCT. O aumento ou a redução dos dias trabalhados por mês e o aumento ou a diminuição da produtividade mensal foram as outras duas variáveis que se demostraram mais sensíveis nesta formação de custo.

Rolezinho pelo funk ostentação: um retrato da identidade do jovem da periferia paulistana

Essa pesquisa explora a identidade do jovem da periferia paulistana retratada pelo movimento Funk Ostentação, que foi contextualizado e analisado sob a perspectiva teórica da Consumer Culture Theory (CCT), com foco nas teorias de identidade relacionadas ao consumo, como self estendido, self expandido, consumo aspiracional e consumo compensatório. Entrevistas e grupo de foco com jovens frequentadores de bailes funk (chamados funkeiros) somaram-se às transcrições de videoclipes de Funk Ostentação e programas com participação de MCs (cantores de funk) e foram analisados e codificados de forma livre, seguindo os preceitos de Strauss e Corbin (2008). Como resultado, foi desenvolvido um modelo teórico no qual os MCs expressam sua identidade por meio de marcas, objetos, lugares e pessoas (self estendido) e expandem aspectos de sua identidade para os funkeiros (self expandido), principalmente pelos videoclipes disponibilizados no YouTube. As relações de fama, admiração e inveja, encontradas nos videoclipes e reforçadas pelo discurso dos entrevistados, mostram aspectos da identidade dos MCs e funkeiros enquanto grupo. Enquanto para os MCs o consumo mostrado nos videoclipes é algo real, os funkeiros afirmam que consomem somente as roupas, acessórios e bebidas, sendo que automóveis, motos, joias e grandes casas fazem parte de suas aspirações de consumo. Foi encontrada diferença na expressão do self masculino e feminino, sendo que o consumo e exibição dos objetos de desejo estão relacionados à identidade masculina e as garotas apenas demonstram interesse em estar com rapazes que possuam os itens desejados, não em adquiri-los. Concluiu-se que o consumo e exibição dos objetos e marcas está relacionado ao consumo compensatório. Os jovens têm no consumo uma forma de preencher alguns aspectos frágeis de seu self e validar seu acesso a determinados locais que antes não se achavam aptos a frequentar, como shoppings centers. Nenhum deles mostrou interesse no consumo ou utilização de produtos não cantados pelo Funk Ostentação, ainda que relacionados ao entretenimento, como itens para prática de esportes e videogames, o que evidencia o consumo compensatório como substituto ao consumo de objetos não relacionados simbolicamente às fragilidades do self dos indivíduos. Também não demonstraram interesse em consumir outros itens que podem lhes trazer aumento de renda, como o investimento em educação, de forma que o consumo compensatório, que remedia os efeitos da exclusão social que sentem, parece substituir a real resolução do problema.

Estudo da produção de pectinase por fermentação em estado sólido utilizando pedúnculo de caju como substrato

Pectinolytic enzymes, or simply pectinases, are complex enzymes that degrade pectic polymers. They have many uses, such as fruit juice extraction and purification, textile fiber treatment and vegetal oil extraction. The aim of this work was to study the kinetics of pectinases production by solid-state fermentation, using dry cashew apple residue as substrate and the microorganism Aspergillus niger CCT 0916. The influence of the initial medium moisture and medium supplementation with a source of nitrogen and phosphorus was evaluated using the factorial experimental planning and response surface methodology. Ammonia sulphate and potassium phosphate were used as nitrogen and phosphorus source, respectively. The variables time of contact (T) and ratio volume solvent/fermented medium (RZ), in systems with and without agitation, were evaluated in order to study the best extraction condition of the produced enzyme. Washed and unwashed cashew apple residues were tested as the growth medium. The unwashed residue was obtained by drying the residue after the extraction of the juice, while the washed residue was obtained by water washing 5 times using the proportion of 1 kg pulp/2 liters of water. Samples were taken every 12 hours for moisture content, pH, protein, reducing sugars, polygalacturonase activity (PG) and viscosity reduction. The physical-chemical composition of the residues had different sugar and pectin levels. For the unwashed residue, the peak activity was reached with 40% of initial moisture content, 1% of nitrogen supplementation without phosphorus addition after 30 hours of process. These conditions led to 16 U/g of PG activity and 82% of viscosity reduction. The calculated models reached similar values to the experimental ones in the same process conditions: 15.55 U/g of PG and 79.57% of viscosity eduction. Similarly, the greatest enzyme production for washed residue was reached with 40% initial moisture content, 1% nitrogen supplementation without phosphorus addition after 22 hours of cultivation. In this condition it was obtained polygalacturonase activity of 9.84 U/g and viscosity reduction of 81.36%. These values are close to experimental values that were of 10.1 U/g and 81%, respectively. The conditions that led to the best PG activity results was the agitated one and the best extraction condition was obtained with 100 minutes of solvent/medium contact and RZ of 5 (mL/g)

Quantificação da floculação de Saccharomyces cerevisiae por bactérias contaminantes da fermentação alcoólica

O assentamento de células de leveduras no fundo das dornas e perdas de células nas centrífugas podem ser causadas por bactérias floculantes, contaminantes naturais da fermentação alcoólica industrial. Estes problemas levam a queda no rendimento e produtividade do etanol. O presente trabalho visa a caracterização da floculação de Saccharomyces cerevisiae por Lactobacillus fermentum CCT 1396. As células de leveduras e bactérias foram misturadas e a floculação das células quantificadas por espectrofotometria. Concentrações de bactérias numa faixa de 0,4 a 3,8g/L (biomassa seca) foram testadas a fim de determinar a ótima concentração de bactérias necessária para provocar a floculação das leveduras. O efeito de pH na floculação das células de leveduras e bactérias foi determinado. 1,38g/L de bactéria foi necessário para a floculação, de 65,4g/L de células de levedura com tempo de contato entre as células (sob agitação) de 15 minutos e repouso de 20 minutos. No pH 3,0 pouco efeito na floculação celular foi detectado e as células continuaram floculadas, mas na faixa de pH 2,0 -- 2,5 a floculação foi próxima de zero. Esta técnica pode ser utilizada para o controle da floculação de leveduras de indústrias de produção de álcool, para determinar a origem desta floculação, já que trata-se de uma técnica fácil, econômica e rápida.

THE EFFECT of IMMEDIATE DENTIN SEALING on THE MARGINAL ADAPTATION and BOND STRENGTHS of TOTAL-ETCH and SELF-ETCH ADHESIVES

Statement of problem. Sealing ability and bond strengths of total-etch and self-etch dentin adhesives used for immediate dentin sealing have not been assessed and established.Purpose. The purpose of this study was to determine the effectiveness of immediate dentin sealing (IDS) using total-etch or self-etch dentin adhesives on microleakage and microtensile bond strength.Material and methods. Twenty recently extracted molars were selected, and standard MOD inlay preparations were made with the gingival margins located below the cemento-enamel unction. The teeth were assigned to 4 experimental groups (n=5) according to the indirect composite restoration cementation technique used: (1) immediate dentin sealing with Adper Single Bond (TEBI); (2) conventional adhesive cementation technique using Adper Single Bond (TEAI); (3) immediate dentin sealing using Adper Prompt L-Pop (SEBI); or (4) conventional adhesive cementation technique using Adper Prompt L-Pop (SEAI). The restored teeth were thermal cycled 1,000 times between 5 degrees and 55 degrees C and then immersed in 50% ammoniacal silver nitrate. Three specimens per restoration were evaluated for microleakage, according to predefined scores, and submitted to Friedman's test (alpha-.05). The specimens were then sectioned to obtain 0.8 +/- 0.2-mm-thick sticks (with n ranging from 32 to 57 specimens) and submitted to microtensile bond strength (mu TBS) testing. The obtained data were submitted to 2-way ANOVA test (alpha=.05).Results. None of the experimental groups demonstrated complete elimination of marginal microleakage. There were significant differences in microleakage of the tested adhesives (P>.001). IDS microleakage scores were similar to those obtained using the conventional cementation technique (CCT) for both adhesives. The highest mean bond strengths were obtained with TEBI (51.1 MPa), whereas SEAI showed the lowest mean bond strengths (1.7 MPa). IDS resulted in significantly higher bond strengths than CCT (P<.001).Conclusions. Total-etch and self-etch adhesives have a significant effect on IDS. IDS resulted in high bond strengths for both adhesives; however, the microleakage was similar to that obtained with CCT (J Prosthet Dent 2009;102:1-9)

Studies on the electrochemical disinfection of water containing Escherichia coli using a Dimensionally Stable Anode

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Uso de caldo de cana-de-açúcar para produção de levana por Zymomonas mobilis CCT4494

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Austenite decomposition of C-Mn steel containing boron by continuous cooling

The austenite decomposition in C-Mn steel containing boron was studied by continuous cooling from 1100 and 845 degreesC using the Jominy test. The results indicate that the different cooling speeds and the presence of boron refine and change the percentage of ferrite microstructure, martensite, and fine pearlite. (C) 2001 Elsevier B.V. B.V. All rights reserved.

Effect of 3,4,4 '-trichlorocarbanilide on growth of lactic acid bacteria contaminants in alcoholic fermentation

3,4,4'-trichlorocarbanilide (TCC) was rested as a new method of bacterial growth control for S. cerevisiae alcoholic fermentations of diluted high test molasses (HTM). Minimal inhibitory concentration (MIC) was tested to determine the necessary concentration of TCC to control bacterial growth. The fed-batch alcoholic fermentation process was used with cell recycle similar to industrial conditions and Lactobacillus fermentum CCT 1407 was mixed in the first inoculum to grow with the yeast. Yeast extract was added into the must to stimulate bacterial growth. The best results of TCC's MIC to bacterial growth of Lactobacillus fermentum and Leuconostoc mesenteroides (< 0.125-1.0 mu g/ml) and Saccharomyces cerevisiae (16 mu g/ml) occurred when it was combined with sodium dodecylsulphate (SDS) in a 1: 4 TCC/SDS ratio (wt/wt) in distilled water solution. 1.8 g/l TCC entrapped in calcium alginate added to the must with yeast extract inhibited the growth of Lactobacillus fermentum CCT 1407 maintaining a controlled acidity, higher yeast viability and up to 20.8% of improvement in the average of alcoholic efficiency. Addition of 0.075 g/l TCC entrapped in calcium alginate and 1.67 mg/l SDS in the wort with yeast extract (0-5.0 g/l), inhibited and controlled the extensive bacterial contamination for 19 cycles of fermentation. (C) 1998 Published by Elsevier B.V. Ltd.

Maxi-K channels contribute to urinary potassium excretion in the ROMK-deficient mouse model of Type II Bartter's syndrome and in adaptation to a high-K diet

Type II Bartter's syndrome is a hereditary hypokalemic renal salt-wasting disorder caused by mutations in the ROMK channel (Kir1.1; Kcnj1), mediating potassium recycling in the thick ascending limb of Henle's loop (TAL) and potassium secretion in the distal tubule and cortical collecting duct (CCT). Newborns with Type II Bartter are transiently hyperkalemic, consistent with loss of ROMK channel function in potassium secretion in distal convoluted tubule and CCT. Yet, these infants rapidly develop persistent hypokalemia owing to increased renal potassium excretion mediated by unknown mechanisms. Here, we used free-flow micropuncture and stationary microperfusion of the late distal tubule to explore the mechanism of renal potassium wasting in the Romk-deficient, Type II Bartter's mouse. We show that potassium absorption in the loop of Henle is reduced in Romk-deficient mice and can account for a significant fraction of renal potassium loss. In addition, we show that iberiotoxin (IBTX)-sensitive, flow-stimulated maxi-K channels account for sustained potassium secretion in the late distal tubule, despite loss of ROMK function. IBTX-sensitive potassium secretion is also increased in high-potassium-adapted wild-type mice. Thus, renal potassium wasting in Type II Bartter is due to both reduced reabsorption in the TAL and K secretion by max-K channels in the late distal tubule. © 2006 International Society of Nephrology.

Production of monoclonal antibodies against Streptococcus mutans antigens

Several studies have been conducted in the last decades aiming to obtain an anti-canies vaccine, however some studies have demonstrated cross reactivity between Streptococcus mutans surface antigens and the human cardiac tissue. In this work, the reactivity of five anti-Streptococcus mutans monoclonal antibodies (MoAb) (24A, 56G, G8, E8 and F6) was tested against oral streptococci, cardiac antigens and skeletal and cardiac myosins, aiming to evaluate the specificity of these MoAb. The hybrid producers of immunoglobulins of the IgG 2b class were cloned by limit dilution and expanded in vivo. MoAb were tested by ELISA. The hybrid 24A reacted with S. mutans CCT 1910, S. salivarius CCT 0365 and S. pyogenes T23. No reactivity difference was observed among the tested species. Cross reactivity with heart and cardiac myosin was not confirmed and only reaction with myosin of skeletal muscle was observed (p = 0.0381). The hybrid 56G reacted with all the tested microorganisms and there was statistically significant difference between S. mutans and S. pyogenes T23 (p < 0.001). This hybrid also reacted with myosin of skeletal muscle (p = 0.0095). C8, E8 and F6 presented low reactivity against oral streptococci strains and no reactivity against cardiac antigens. The data of this study showed that the 24A and 56G anti-S. mutans MoAb presented reactivity with S. pyogenes and S. salivarius, reinforcing the occurrence of common antigens between these species. The tested MoAb presented low cross-reactivity with myosin of skeletal muscle, but anti-heart activity could not be confirmed.