K-T transition in Deccan traps of central India marks major marine seaway across India.

Deccan intertrappean sediments in central India are generally considered as terrestrial deposits of Maastrichtian age, but the Cretaceous–Tertiary (K–T) position is still unknown. Here we report the discovery of the K–T transition, a marine incursion and environmental changes preserved within the intertrappean sediments at Jhilmili, Chhindwara District, Madhya Pradesh. Integrative biostratigraphic, sedimentologic, mineralogic and chemostratigraphic analyses reveal the basal Danian in the intertrappean sediments between lower and upper trap basalts that regionally correspond to C29r and the C29R/C29N transition, respectively. Intertrappean deposition occurred in predominantly terrestrial semi-humid to arid environments. But a short aquatic interval of fresh water ponds and lakes followed by shallow coastal marine conditions with brackish marine ostracods and early Danian zone P1a planktic foraminifera mark this interval very close to the K–T boundary. This marine incursion marks the existence of a nearby seaway, probably extending inland from the west through the Narmada and Tapti rift valleys. The Jhilmili results thus identify the K–T boundary near the end of the main phase of Deccan eruptions and indicate that a major seaway extended at least 800 km across India.

Barriers to “industrialisation” for interwar British retailing? The case of Marks & Spencer Ltd.

Research on international differences in retail productivity has highlighted formidable environmental barriers to the ‘industrialisation’ of mass retailing as a driver of declining British interwar productivity growth in this sector (and in services more generally). We examine evidence for such barriers, using a case study of a firm that built its interwar expansion strategy on ‘American’ retail methods – Marks & Spencer (M&S). We find that, rather than facing barriers to the adoption of American mass retail practices, M&S reaped major productivity gains from this process. This adds further evidence to an emerging literature rejecting the barriers to industrialisation thesis for retailing.

A comparison of two bench-scale anaerobic systems used for the treatment of dairy effluents

The objective of this work was to compare two anaerobic reactor conflgurations, a hybrid upflow anaerobic sludge blanket (UASBh) reactor and an anaerobic sequencing batch reactor with immobilised biomass (ASBBR) treating dairy effluents. The reactors were fed with effluent from the milk pasteurisation process (effluent 1-E1) and later with effluent from the same process combined with the one from the cheese manufacturing (effluent 2-E2). The ASBBR reactor showed average organic matter removal efficiency of 95.2% for E1 and 93.5% for E2, while the hybrid UASB reactor showed removal efficiencies of 90.3% and 80.1% respectively.

Real time video segmentation for recognising paint marks on bad wooden railway sleepers

Wooden railway sleeper inspections in Sweden are currently performed manually by a human operator; such inspections are based on visual analysis. Machine vision based approach has been done to emulate the visual abilities of human operator to enable automation of the process. Through this process bad sleepers are identified, and a spot is marked on it with specific color (blue in the current case) on the rail so that the maintenance operators are able to identify the spot and replace the sleeper. The motive of this thesis is to help the operators to identify those sleepers which are marked by color (spots), using an “Intelligent Vehicle” which is capable of running on the track. Capturing video while running on the track and segmenting the object of interest (spot) through this vehicle; we can automate this work and minimize the human intuitions. The video acquisition process depends on camera position and source light to obtain fine brightness in acquisition, we have tested 4 different types of combinations (camera position and source light) here to record the video and test the validity of proposed method. A sequence of real time rail frames are extracted from these videos and further processing (depending upon the data acquisition process) is done to identify the spots. After identification of spot each frame is divided in to 9 regions to know the particular region where the spot lies to avoid overlapping with noise, and so on. The proposed method will generate the information regarding in which region the spot lies, based on nine regions in each frame. From the generated results we have made some classification regarding data collection techniques, efficiency, time and speed. In this report, extensive experiments using image sequences from particular camera are reported and the experiments were done using intelligent vehicle as well as test vehicle and the results shows that we have achieved 95% success in identifying the spots when we use video as it is, in other method were we can skip some frames in pre-processing to increase the speed of video but the segmentation results we reduced to 85% and the time was very less compared to previous one. This shows the validity of proposed method in identification of spots lying on wooden railway sleepers where we can compromise between time and efficiency to get the desired result.

Zebrafish SPI-1 marks a site of myeloid development independent of primitive erythropoiesis: implications for axial patterning.

The mammalian transcription factor SPI-1 (synonyms: SPI1, PU.1, or Sfpi1) plays a critical role in myeloid development. To examine early myeloid commitment in the zebrafish embryo, we isolated a gene from zebrafish that is a SPI-1 orthologue on the basis of homology and phylogenetic considerations. The zebrafish spi1 (pu1) gene was first expressed at 12 h postfertilization in rostral lateral plate mesoderm (LPM), anatomically isolated from erythroid development in caudal lateral plate mesoderm. Fate-mapping traced rostral LPM cells from the region of initial spi1 expression to a myeloid fate. spi1 expression was lost in the bloodless mutant cloche, but rostral spi1 expression and myeloid development were preserved in the mutant spadetail, despite its complete erythropoietic failure. This dissociation of myeloid and erythroid development was further explored in studies of embryos overexpressing BMP-4, or chordin, in bmp-deficient swirl and snailhouse mutants, and chordin-deficient chordino mutants. These studies demonstrate that, in zebrafish, spi1 marks a rostral population of LPM cells committed to a myeloid fate anatomically separated from and developmentally independent of erythroid commitment in the caudal LPM. Such complete anatomical and developmental dissociation of two hematopoietic lineages adds an interesting complexity to the understanding of vertebrate hematopoietic development and presents significant implications for the mechanisms regulating axial patterning.

Chronic heart failure programs : does more equal less? (BENCH study)

The national multi-centre study (49 programs, 1158 patients) developed a quality score (HF-IS) and the national benchmarks for heart programs. The higher a program scored on the HF-IS the greater the reduction in hospital admissions and mortality. This score has the potential to change national nursing practice and improve health outcomes of patients.

The recognition and protection of well-known trade marks in Indonesia

Legal context The recognition and protection of well-known marks in Indonesia has improved over the last few years for a variety of reasons.

Key points First, the Asian Crisis resulted in the creation of a Commercial Court, which is a clear improvement over the previously responsible District Courts. Secondly, the increasingly frequent publication of court decisions has improved transparency and consistency of those decisions. Well-known marks are now clearly protected against use for similar goods/services. Protection is extended to dissimilar goods/services by applying Article 16(3) TRIPS directly or by arguing that registration occurred in bad faith. Nevertheless, decisions thus far concern almost exclusively revocation and invalidity of registrations. Civil remedies such as damages and interim injunctions are hardly used, because the outdated civil procedural law has not familiarised judges with such legal instruments. Clearing the register of infringing registrations is another matter of concern. Cancellation for non-use for three consecutive years can be difficult, because the plaintiff is required to provide evidence of the last use in the production of the goods/services rather than in the course of trade more generally.

Practical significance While it has become much easier to protect well-known marks in Indonesia, much work remains to be done regarding the procedural framework of civil infringement proceedings and regarding the clearing of the register.

An approach to assign individual marks from a team mark : the case of Australian grading system at universities

This study uses a new approach to assign individual marks from a team mark using individual contributions to a teamwork product. A team member’s contribution to a teamwork product, in the form of an individual weighting factor, is calculated using team members’ co‐assessment. A comparison of the proposed approach with existing methods has been discussed with the help of a typical teamwork example. The approach has been refined to make it applicable for the Australian grading system at universities. It has been implemented in a large undergraduate engineering course to observe its effectiveness in practice. The results show that the method encourages teamwork, penalises below‐average contributions and rewards above‐average contributions. An analysis of a students’ perception survey shows that students prefer the approach over alternative approaches.

Advances in infection and immunity : from bench to bedside

Following the successful inaugural Lorne Infection and Immunity Conference in 2011, scientists have gathered again on 15–17 February 2012 for a second round of this multidisciplinary international meeting. Sessions covered a range of different topics, including innate and adaptive immune responses to infection, host–pathogen interactions, systems biology, as well as clinical and translational research. Here we summarize some of the main concepts discussed at the meeting and the progress on the development of new therapeutic approaches for the control of infectious diseases.

A review of mathematical equations to assign individual marks from a team mark

BACKGROUND : Team-based learning is an integral part of engineering education today. Development of team skills is now a part of the curriculum at universities as employers demand these skills on graduates. Higher education institutions enforce academic staff to teach, practise and assess team skills, and at the same time, they ask academic staff to supply individual marks and/or grades. Allocating individual marks from a team mark is a very complex and sensitive task that may adversely affect both individual and team performance. A number of both qualitative and quantitative methods are available to address this issue. Quantitative mathematical methods are favoured over qualitative subjective methods as they are more straightforward to explain to the students and they may help minimise conflicts between assessors and students. PURPOSE : This study presents a review of commonly used mathematical equations to allocate individual marks from a team mark. Quantitative analytical equations are favoured over qualitative subjective methods because they are more straightforward to explain to the students and if explained to the students in advance, they may help minimise conflicts between assessors and students. Some of these analytical equations focus primarily on the assessment of the quality of teamwork product (product assessment) while the others put greater emphasis on the assessment of teamwork performance (process assessment). The remaining equations try to strike a balance between product assessment and process assessment. The primary purpose of this study is to discuss the qualitative aspects of quantitative equations. DESIGN/METHOD : This study simulates a set of scenarios of team marks and individual contributions that collectively cover all possible teamwork assessment environments. The available analytical equations are then applied to each case to examine their relative merits with respect to a set of evaluation criteria with exhaustive graphical plots. RESULTS : Although each analytical equations discussed and analysed in this study has its own merits for a particular application scenario, the recent methods such as knee formula in SPARKPLUS and cap formula, are relatively better in terms of a number of evaluation criteria such as fairness, teamwork attitude, balance between process and product assessments etc. In addition to having all favourable properties of knee formula, cap formula explicitly considers the quality of teamwork (i.e., team mark) while allocating individual marks. Cap formula may, however, be difficult to explain to the students due to relatively complex mathematical equations involved. CONCLUSIONS : Not all existing analytical equations that allocate individual marks from a team mark have similar characteristics. Recent methods, knee formula and cap formula, are advantageous in terms of a number of evaluation criteria and are recommended to apply in practice. However, it is important to examine these equations with respect to enhancing students’ learning achievements rather than the students and academic staff’s preferences.