958 resultados para Appellate procedure
Resumo:
Dehydroamino acids are important precursors for the synthesis of a number of unnatural amino acids and are structural components in many biologically active peptide derivatives. However, efficient synthetic procedures for their production in large amounts and without side reactions are limited. We report here an improved procedure for the synthesis of dehydroalanine and dehydroamino butyric acid from the carbonate derivatives of serine and threonine using TBAF. The antiselective E-2 elimination of the carbonate derivatives of serine and threonine using TBAF is milder and more efficient than other available procedures. The elimination reaction is completed in less than 10 min with various carbonate derivatives studied and the methodology is very efficient for the synthesis of dehydroamino acids and dehydropeptides. The procedure thus provides an easy access to key synthetic precursors and can be used to introduce interesting structural elements to designed peptides. Copyright
Resumo:
Micromachined antennas are recieving great interest as carrier frequencies move higher into the frequency spectrum due to their superior performance and amenability for integration with active devices. However their design is cumbersome owing to the complexity of the structure. To overcome this, in this paper, an iterative procedure is suggested to facilitate fast design of micromachined patch antennas based on a simulation study. A microstrip line on a micromachined Silicon substrate is simulated in a full wave simulator by solving for the ports only. From the obtained propagation constant, the effective dilectric constant for the micromachined substrate is estimated. The process is repeated for a number of values of the width of the microstrip and a plot is made for the variation of the effective dielectric constant with the microstrip width. Then an iterative method in combination with the extrapolated permittivity which includes the effect of cavity extensions in all the directions, is used to obtain the width and the corresponding effective dielectric constant. This method has been verified to be quite accurate by comparison with full wave simulations and hence it can function as a good starting point for designers to design micromachined antennas.
Resumo:
In this paper, we have first given a numerical procedure for the solution of second order non-linear ordinary differential equations of the type y″ = f (x;y, y′) with given initial conditions. The method is based on geometrical interpretation of the equation, which suggests a simple geometrical construction of the integral curve. We then translate this geometrical method to the numerical procedure adaptable to desk calculators and digital computers. We have studied the efficacy of this method with the help of an illustrative example with known exact solution. We have also compared it with Runge-Kutta method. We have then applied this method to a physical problem, namely, the study of the temperature distribution in a semi-infinite solid homogeneous medium for temperature-dependent conductivity coefficient.
Resumo:
A simple and accurate method for the determination of 0.25 to 1.0 μg. of manganese (in samples containing 1 to 4 μg. of manganese) has been developed by modifying the conditions for the reaction between permanganate and benzidine. Manganese is oxidized with potassium periodate in orthophosphoric acid and selectively estimated in the presence of excess oxidant with benzidine in formic acid. The procedure is applicable for estimation of manganese in biological samples, with recoveries in the range 97.5 to 106.1%.
Resumo:
Inductors are important energy storage elements that are used as filters in switching power converters. The operating efficiency of power inductors depend on the initial design choices and they remain as one of the most inefficient elements in a power converter. The focus of this paper is to explore the inductor design procedure from the point of efficiency and operating temperature. A modified form of the area product approach is used as starting point for the inductor design. The equations which estimate the power loss in core and copper winding are described. The surface temperature of the inductor is modelled using heat transfer equations for radiation and natural convection. All design assumptions are verified by actual experimental data and results show a good match with the analysis.
Resumo:
Reconstructions in optical tomography involve obtaining the images of absorption and reduced scattering coefficients. The integrated intensity data has greater sensitivity to absorption coefficient variations than scattering coefficient. However, the sensitivity of intensity data to scattering coefficient is not zero. We considered an object with two inhomogeneities (one in absorption and the other in scattering coefficient). The standard iterative reconstruction techniques produced results, which were plagued by cross talk, i.e., the absorption coefficient reconstruction has a false positive corresponding to the location of scattering inhomogeneity, and vice-versa. We present a method to remove cross talk in the reconstruction, by generating a weight matrix and weighting the update vector during the iteration. The weight matrix is created by the following method: we first perform a simple backprojection of the difference between the experimental and corresponding homogeneous intensity data. The built up image has greater weightage towards absorption inhomogeneity than the scattering inhomogeneity and its appropriate inverse is weighted towards the scattering inhomogeneity. These two weight matrices are used as multiplication factors in the update vectors, normalized backprojected image of difference intensity for absorption inhomogeneity and the inverse of the above for the scattering inhomogeneity, during the image reconstruction procedure. We demonstrate through numerical simulations, that cross-talk is fully eliminated through this modified reconstruction procedure.
Resumo:
A general method for generation of base-pairs in a curved DNA structure, for any prescribed values of helical parameters--unit rise (h), unit twist (theta), wedge roll (theta R) and wedge tilt (theta T), propeller twist (theta p) and displacement (D) is described. Its application for generation of uniform as well curved structures is also illustrated with some representative examples. An interesting relationship is observed between helical twist (theta), base-pair parameters theta x, theta y and the wedge parameters theta R, theta T, which has important consequences for the description and estimation of DNA curvature.
Resumo:
This thesis explores the particular framework of evidentiary assessment of three selected appellate national asylum procedures in Europe and discusses the relationship between these procedures, on the one hand, and between these procedures and other legal systems, including the EU legal order and international law, on the other. A theme running throughout the thesis is the EU strivings towards approximation of national asylum procedures and my study analyses the evidentiary assessment of national procedures with the aim of pinpointing similarities and differences, and the influences which affect these distinctions. The thesis first explores the frames construed for national evidentiary solutions by studying the object of decision-making and the impact of legal systems outside the national. Second, the study analyses the factual evidentiary assessment of three national procedures - German, Finnish and English. Thirdly, the study explores the interrelationship between these procedures and the legal systems influencing them and poses questions in relation to the strivings of EU and methods of convergence. The thesis begins by stating the framework and starting points for the research. It moves on to establish keys of comparison concerning four elements of evidentiary assessment that are of importance to any appellate asylum procedure, and that can be compared between national procedures, on the one hand, and between international, regional and national frameworks, on the other. Four keys of comparison are established: the burden of proof, demands for evidentiary robustness, the standard of proof and requirements for the methods of evidentiary assessment. These keys of comparison are then identified in three national appellate asylum procedures, and in order to come to conclusions on the evidentiary standards of the appellate asylum procedures, relevant elements of the asylum procedures in general are presented. Further, institutional, formal and procedural matters which have an impact on the evidentiary standards in the national appellate procedures are analysed. From there, the thesis moves on to establish the relationship between national evidentiary standards and the legal systems which affect them, and gives reasons for similarities and divergences. Further, the thesis studies the impact of the national frameworks on the regional and international level. Lastly, the dissertation makes a de lege ferenda survey of the relationship between EU developments, the goal of harmonization in relation to national asylum procedures and the particular feature of evidentiary standards in national appellate asylum procedures. Methodology The thesis follows legal dogmatic methods. The aim is to analyse legal norms and legal constructions and give them content and context. My study takes as its outset an understanding of the purposes for legal research also regarding evidence and asylum to determine the contents of valid law through analysis and systematization. However, as evidentiary issues traditionally are normatively vaguely defined, a strict traditional normative dogmatic approach is not applied. For the same reason a traditionalist and strict legal positivism is not applied. The dogmatics applied to the analysis of the study is supported by practical analysis. The aim is not only to reach conclusions concerning the contents of legal norms and the requirements of law, but also to study the use and practical functioning of these norms, giving them a practcial context. Further, the study relies on a comparative method. A functionalist comparative method is employed and keys of comparison are found in evidentiary standards of three selected national appellate asylum procedures. The functioning equivalences of German, Finnish and English evidentiary standards of appellate asylum procedures are compared, and they are positioned in an European and international legal setting. Research Results The thesis provides results regarding the use of evidence in national appellate asylum procedures. It is established that evidentiary solutions do indeed impact on the asylum procedure and that the results of the procedure are dependent on the evidentiary solutions made in the procedures. Variations in, amongst other things, the interpretation of the burden of proof, the applied standard of proof and the method for determining evidentiary value, are analysed. It is established that national impacts play an important role in the adaptation of national appellate procedures to external requirements. Further, it is established that the impact of national procedures on as well the international framework as on EU law varies between the studied countries, partly depending on the position of the Member State in legislative advances at the EU level. In this comparative study it is, further, established that the impact of EU requirements concerning evidentiary issues may be have positive as well as negative effects with regard to the desired harmonization. It is also concluded that harmonization using means of convergence that primaly target legal frameworks may not in all instances be optimal in relation to evidentiary standards, and that more varied and pragmatic means of convergence must be introduced in order to secure harmonization also in terms of evidence. To date, legal culture and traditions seem to prevail over direct efforts at procedural harmonization.
Resumo:
Stereospecific synthesis of 4-formylcarane (2) has been achieved through hydroboration-carbonylation of DELTA-3-carene. Both the reactions are optimised using sodium borohydride. The method is utilised for the synthesis of sandatrile (3), a novel perfumery chemical.
Resumo:
In linear elastic fracture mechanics (LEFM), Irwin's crack closure integral (CCI) is one of the signficant concepts for the estimation of strain energy release rates (SERR) G, in individual as well as mixed-mode configurations. For effective utilization of this concept in conjunction with the finite element method (FEM), Rybicki and Kanninen [Engng Fracture Mech. 9, 931 938 (1977)] have proposed simple and direct estimations of the CCI in terms of nodal forces and displacements in the elements forming the crack tip from a single finite element analysis instead of the conventional two configuration analyses. These modified CCI (MCCI) expressions are basically element dependent. A systematic derivation of these expressions using element stress and displacement distributions is required. In the present work, a general procedure is given for the derivation of MCCI expressions in 3D problems with cracks. Further, a concept of sub-area integration is proposed which facilitates evaluation of SERR at a large number of points along the crack front without refining the finite element mesh. Numerical data are presented for two standard problems, a thick centre-cracked tension specimen and a semi-elliptical surface crack in a thick slab. Estimates for the stress intensity factor based on MCCI expressions corresponding to eight-noded brick elements are obtained and compared with available results in the literature.
Resumo:
In this work, a procedure is presented for the reconstruction of biological organs from image sequences obtained through CT-scan. Although commercial software, which can accomplish this task, are readily available, the procedure presented here needs only free software. The procedure has been applied to reconstruct a liver from the scan data available in literature. 3D biological organs obtained this way can be used for the finite element analysis of biological organs and this has been demonstrated by carrying out an FE analysis on the reconstructed liver.