Subjective reasons why immigrant patients attend the emergency department

Background Some patients visit a hospital’s emergency department (ED) for reasons other than an urgent medical condition. There is evidence that this practice may differ among patients from different backgrounds. The objective of this study was to examine the reasons why patients from a non-English speaking background (NESB) and patients with an English speaking background but not born in Australia (ESB-NBA) visit the ED, as compared to patients from English-speaking backgrounds but born in Australia (ESB-BA). Methods A cross-sectional survey was conducted at the ED of a tertiary hospital in metropolitan Brisbane, Queensland, Australia. Over a four-month period patients who were assigned an Australasian Triage Scale score of 3, 4 or 5 were surveyed. Pearson chi-square test and multivariate logistic regression analyses were performed to examine the differences between the ESB and NESB patients’ reported reasons for attending the ED. Results A total of 828 patients participated in this study. Compared to ESB-BA patients NESB patients were less likely to consider contacting a general practitioner (GP) before attending the ED (Odds Ratios (OR) 0.6 (95% Confidence Interval (CI) 0.4–0.8, p < .05) While ESB-NBA were more likely to consider contacting a GP 1.7 (1.1–2.5, p < .05). Both the NESB patients and the ESB-NBA patients were far more likely than ESB-BA patients to report that they had visited the ED either because they do not have a GP (OR 7.9, 95% CI 4.7–13.4, p < .001) and 2.2 (95% CI 1.1–4.4, p < .05) respectively and less likely to think that the ED could deal with their problem better than a GP(OR 0.5 (95% CI 0.3–0.8, p < .05) and 0.7 (0.3–0.9, p < .05) respectively. The NESB patients also thought it would take too long to make an appointment to consult a GP (OR 6.2, 95% CI 3.7–10.4, p < 0.001). Conclusions NESB patients were the least likely to consider contacting a GP before attending hospital EDs. Educational interventions may help direct NESB people to the appropriate health services and therefore reduce the burden on tertiary hospitals ED.

Combination chemotherapy for primary small intestinal lymphoma in the Middle East

Twelve patients with primary small intestinal lymphoma were followed prospectively for 3 years. Endoscopic abnormalities were diagnostic of lymphoma in all cases where the duodenum was involved (83%). In three cases (25%) the disease extended to the stomach. One patient (8%) had diffuse small cell cleaved and 11 (92%) diffuse large cell lymphoma stages I (8%), II (25%), III (58%) and IV (8%). Nine of them were unresectable and primarily treated with combination chemotherapy; 67% achieved complete remission, 22% partial response and 11% no response. Only one patient relapsed and achieved a second remission. All complete remission patients are currently alive and free of disease at a median follow-up of 36 months. Overall survival for all patients is 58%, and disease-free survival is 50%. No instance of chemotherapy-related bleeding or perforation was seen. Tetracycline was necessary for the treatment of IPSID-associated diarrhea and malabsorption in spite of cytotoxic chemotherapy.

Suitability of diodes for point dose measurements in IMRT/VMAT beams

This study investigated a potential source of inaccuracy for diode measurements in modulated beams; the effect of diode housing asymmetry on measurement results. The possible effects of diode housing asymmetry on the measurement of steep dose gradients were evaluated by measuring 5x5 cm2 beam profiles, with three cylindrical diodes and two commonly used ionization chambers, with each dosimeter positioned in a 3D scanning water tank with its stem perpendicular to the beam axis (horizontal) and parallel to the direction of scanning. The resulting profiles were used to compare the penumbrae measured with the diode stem pointing into (equivalent to a “stem-first” setup) and out of the field (equivalent to a “stem-last” setup) in order to evaluate the effects of dosimeter alignment and thereby identify the effects of dosimeter asymmetry. The stem-first and stem-last orientations resulted in differences of up to 0.2 mm in the measured 20-80% penumbra widths and differences of up to 0.4 mm in the off axis position of the 90% isodose. These differences, which are smaller than previously reported for older model dosimeters, were apparent in the profile results for both diodes and small volume ionization chambers. As an extension to this study, the practical use of all five dosimeters was exemplified by measuring point doses in IMRT test beams. These measurements showed good agreement (within 2%) between the diodes and the small volume ionization chamber, with all of these dosimeters being able to identify a region 3% under-dosage which was not identified by a larger volume (6 mm diameter) ionization chamber. The results of this work should help to remove some of the barriers to the use of diodes for modulated radiotherapy dosimetry in the future.

Correlates of traditional bullying and cyberbullying perpetration among Australian students

This study investigated the associations of gender, age, trait anger, moral disengagement, witnessing of interparental conflict, school connectedness and the religious makeup of the school setting in the involvement in traditional bullying and cyberbullying perpetration. Five hundred Australian students completed an anonymous self-report, paper-based questionnaire. According to the results, 25.2% of the participants reported having engaged in traditional or cyberbullying perpetration. While trait anger and moral disengagement were associated with being a traditional bully, trait anger, interparental conflicts, moral disengagement and school connectedness were associated with being a traditional bully-victim. Additionally, trait anger and moral disengagement were associated with being a traditional-and-a-cyberbully. Our findings indicated that besides individual variables, the family and school environment have an impact on traditional and cyberbullying perpetration behavior. Results imply that any prevention attempts to reduce traditional and cyberbullying should consider students’ experiences both at home and at school.

Robust principal component analysis in water quality index development

Some statistical procedures already available in literature are employed in developing the water quality index, WQI. The nature of complexity and interdependency that occur in physical and chemical processes of water could be easier explained if statistical approaches were applied to water quality indexing. The most popular statistical method used in developing WQI is the principal component analysis (PCA). In literature, the WQI development based on the classical PCA mostly used water quality data that have been transformed and normalized. Outliers may be considered in or eliminated from the analysis. However, the classical mean and sample covariance matrix used in classical PCA methodology is not reliable if the outliers exist in the data. Since the presence of outliers may affect the computation of the principal component, robust principal component analysis, RPCA should be used. Focusing in Langat River, the RPCA-WQI was introduced for the first time in this study to re-calculate the DOE-WQI. Results show that the RPCA-WQI is capable to capture similar distribution in the existing DOE-WQI.

Pumping systems: Design and energy efficiency

Pumping systems are widely used in many applications, including municipal water/wastewater services, domestic, commercial and agricultural services, and industrial processes. They are a very significant energy user and consume nearly 20% of the world’s electrical energy demand. Therefore, improving the energy efficiency of pumping systems can provide great benefits in terms of energy, environment, and cost reduction. In this entry, an overview of pump classification with pros and cons of each type of pump is presented. The procedures used to design pumping systems are also outlined. This is then followed by a discussion on the opportunities for improving the energy efficiency of pumping systems during every stage of design, selection, operation, and maintenance.

Common variants at 12q14 and 12q24 are associated with hippocampal volume

Aging is associated with reductions in hippocampal volume that are accelerated by Alzheimer's disease and vascular risk factors. Our genome-wide association study (GWAS) of dementia-free persons (n = 9,232) identified 46 SNPs at four loci with P values of <4.0 × 10 -7. In two additional samples (n = 2,318), associations were replicated at 12q14 within MSRB3-WIF1 (discovery and replication; rs17178006; P = 5.3 × 10 -11) and at 12q24 near HRK-FBXW8 (rs7294919; P = 2.9 × 10 -11). Remaining associations included one SNP at 2q24 within DPP4 (rs6741949; P = 2.9 × 10 -7) and nine SNPs at 9p33 within ASTN2 (rs7852872; P = 1.0 × 10 -7); along with the chromosome 12 associations, these loci were also associated with hippocampal volume (P < 0.05) in a third younger, more heterogeneous sample (n = 7,794). The SNP in ASTN2 also showed suggestive association with decline in cognition in a largely independent sample (n = 1,563). These associations implicate genes related to apoptosis (HRK), development (WIF1), oxidative stress (MSR3B), ubiquitination (FBXW8) and neuronal migration (ASTN2), as well as enzymes targeted by new diabetes medications (DPP4), indicating new genetic influences on hippocampal size and possibly the risk of cognitive decline and dementia.

Complex crystallization dynamics in amorphous germanium observed with dynamic transmission electron microscopy

Crystallization of amorphous germanium (a-Ge) by laser or electron beam heating is a remarkably complex process that involves several distinct modes of crystal growth and the development of intricate microstructural patterns on the nanosecond to ten microsecond time scales. Here we use dynamic transmission electron microscopy (DTEM) to study the fast, complex crystallization dynamics with 10 nm spatial and 15 ns temporal resolution. We have obtained time-resolved real-space images of nanosecond laser-induced crystallization in a-Ge with unprecedentedly high spatial resolution. Direct visualization of the crystallization front allows for time-resolved snapshots of the initiation and roughening of the dendrites on submicrosecond time scales. This growth is followed by a rapid transition to a ledgelike growth mechanism that produces a layered microstructure on a time scale of several microseconds. This study provides insights into the mechanisms governing this complex crystallization process and is a dramatic demonstration of the power of DTEM for studying time-dependent material processes far from equilibrium.

In situ investigation of explosive crystallization in a-Ge: Experimental determination of the interface response function using dynamic transmission electron microscopy

The crystallization of amorphous semiconductors is a strongly exothermic process. Once initiated the release of latent heat can be sufficient to drive a self-sustaining crystallization front through the material in a manner that has been described as explosive. Here, we perform a quantitative in situ study of explosive crystallization in amorphous germanium using dynamic transmission electron microscopy. Direct observations of the speed of the explosive crystallization front as it evolves along a laser-imprinted temperature gradient are used to experimentally determine the complete interface response function (i.e., the temperature-dependent front propagation speed) for this process, which reaches a peak of 16 m/s. Fitting to the Frenkel-Wilson kinetic law demonstrates that the diffusivity of the material locally/immediately in advance of the explosive crystallization front is inconsistent with those of a liquid phase. This result suggests a modification to the liquid-mediated mechanism commonly used to describe this process that replaces the phase change at the leading amorphous-liquid interface with a change in bonding character (from covalent to metallic) occurring in the hot amorphous material.

Elastic constants of sodium nitrate

Sodium nitrate is isostructural with calcite and crystallizes in the space group DQd. It is one of these substances whose physical properties have been widely investigated. However, a perusal of literature shows that the agreement between the elastic constants obtained by various investigators is not good.

GWAS of 126,559 individuals identifies genetic variants associated with educational attainment

A genome-wide association study (GWAS) of educational attainment was conducted in a discovery sample of 101,069 individuals and a replication sample of 25,490. Three independent single-nucleotide polymorphisms (SNPs) are genome-wide significant (rs9320913, rs11584700, rs4851266), and all three replicate. Estimated effects sizes are small (coefficient of determination R(2) approximately 0.02%), approximately 1 month of schooling per allele. A linear polygenic score from all measured SNPs accounts for approximately 2% of the variance in both educational attainment and cognitive function. Genes in the region of the loci have previously been associated with health, cognitive, and central nervous system phenotypes, and bioinformatics analyses suggest the involvement of the anterior caudate nucleus. These findings provide promising candidate SNPs for follow-up work, and our effect size estimates can anchor power analyses in social-science genetics.

Elastic Constants of Sodium Nitrate from 77 to 300 K

The six independent elastic constants of sodium nitrate are determined using 10 MHz ultrasonic pulse echo superposition technique over the temperature interval 77 to 300 K. The values obtained at 300 K are C11 = 5.71, C12 = 2.16, C33 = 3.3, C13 = 1.66, C44 = 1.24, C14 = 0.82, and at 77 K C11 = 6.63, C12 = 2.07, C33 = 3.99, C13 = 1.67, C44 = 1.69, C14 = 1.16 all expressed in units of 1011 dyn/cm2.

Econometric models of Finnish non-industrial private forest owners' timber supply and timber stock

This dissertation examines the short- and long-run impacts of timber prices and other factors affecting NIPF owners' timber harvesting and timber stocking decisions. The utility-based Faustmann model provides testable hypotheses of the exogenous variables retained in the timber supply analysis. The timber stock function, derived from a two-period biomass harvesting model, is estimated using a two-step GMM estimator based on balanced panel data from 1983 to 1991. Timber supply functions are estimated using a Tobit model adjusted for heteroscedasticity and nonnormality of errors based on panel data from 1994 to 1998. Results show that if specification analysis of the Tobit model is ignored, inconsistency and biasedness can have a marked effect on parameter estimates. The empirical results show that owner's age is the single most important factor determining timber stock; timber price is the single most important factor in harvesting decision. The results of the timber supply estimations can be interpreted using utility-based Faustmann model of a forest owner who values a growing timber in situ.

The law and policy for electricity generated by renewable energy: Greening the power in three Middle Eastern jurisdictions

This thesis examines the law and policy concerning renewable energy electricity generation in Palestine, Jordan, and Abu Dhabi. The thesis gives greater attention to the promotion of solar power owing to the abundance and viability. It appears that energy security profoundly underpins the utilisation of renewable electricity, and the motivation of climate change mitigation also pays a role in the promotion of renewable energy in these jurisdictions. However, current policies and regulations are not fully able to promote the renewables in the power sector. The thesis submits that reforms of law and policy are necessary to enhance the achievement of environmental and energy goals.