Digestibilidade in vitro/gás de volumosos exclusivos ou combinados avaliados pelo resíduo remanescente da digestão da matéria seca e produção de gás

Foi avaliada a digestibilidade in vitro/gás da matéria seca (MS) de quatro volumosos, exclusivos e suas combinações, na proporção de 50% na MS. Foram incubados 100 mg de amostra por tratamento, em triplicatas, em 48 h de digestão. As digestibilidades da MS e a produção de gás foram: cana-de-açúcar = 60,6%, 17,3 mL; cana-de-açúcar + silagem de milho = 63,9%, 19,6 mL; cana-de-açúcar + capim-elefante com 60 dias = 60,5%, 16,9 mL; cana-de-açúcar + capim-elefante com 180 dias = 48,6%, 14,1 mL; silagem de milho = 66,3%; silagem de milho + capim-elefante com 60 dias = 62,1%, 16,7 mL; silagem de milho + capim-elefante com 180 dias = 52,7%, 15,8 mL; capim-elefante com 60 dias = 61,5%, 16,9 mL; capim-elefante com 180 dias = 34,6%, 11,7 mL. Constatou-se que a combinação de volumosos, em alguns casos, pode diminuir a digestibilidade da MS dos volumosos de melhor qualidade.

Desempenho e digestibilidade dos nutrientes em cordeiros alimentados com dietas contendo silagem de resíduos de peixe

Foram utilizados 36 cordeiros 7/8 Ile de France 1/8 Ideal (18 machos e 18 fêmeas) com peso corporal inicial de 17,90 ± 1,27 kg alimentados com as dietas: controle; SRPAD - com 8% de silagem de resíduo do processamento de tilápia (Oreochromis niloticus); e SRPAM - com 8% de silagem de resíduo do processamento de peixe-sapo (Lophius gastrophisus). As silagens de resíduos de peixes substituíram parcialmente o farelo de soja e, como volumoso, utilizou-se silagem de milho (40%). Os cordeiros foram mantidos em baias individuais, com controle do alimento fornecido e das sobras e pesagem a cada 14 dias até atingirem 32 kg, quando foram realizadas as medidas biométricas. Paralelamente, foram realizados ensaios de digestibilidade e de metabolismo utilizando-se 12 cordeiras 7/8 Ile de France 1/8 Ideal para determinação dos coeficientes de digestibilidade da MS, MO, PB, EE, FDN e CT e do balanço de nitrogênio das dietas experimentais. O consumo de MS e o ganho médio diário não foram influenciados pelas dietas e pelo sexo e apresentaram médias de 891,83 e 240,26 g/dia, respectivamente. Entretanto, a conversão alimentar dos cordeiros alimentados com as dietas com SRPAM foi pior (4,04) em relação à daqueles alimentados com as dietas controle (3,81) e com SRPAD (3,47). Os cordeiros apresentaram maior comprimento corporal (60,09 cm) e altura do anterior (56,11 cm) em comparação às cordeiras (58,03 e 54,75 cm, respectivamente). Cordeiros alimentados com dietas contendo SRPAD tiveram maior ingestão de EE e melhor coeficiente de digestibilidade do EE (90,39%), enquanto aqueles alimentados com a dieta controle apresentaram o menor coeficiente de digestibilidade da FDN (59,20%). A substituição parcial do farelo de soja por silagem de resíduos de peixes mostrou-se como boa alternativa protéica na alimentação de cordeiros.

Estimativas de parâmetros genéticos para altura do posterior, peso e circunferência escrotal em bovinos da raça Nelore

Visando estimar parâmetros genéticos em bovinos, foram utilizados registros de pesos padronizados aos 120, 210, 365, 450 e 550 dias de idade (P120, P210, P365, P450 e P550), altura do posterior mensurada próxima ao sobreano (ALT) e circunferências escrotais (CE) padronizadas aos 365, 450 e 550 dias de idade (CE365, CE450 e CE550). Os dados foram provenientes de animais machos e fêmeas, nascidos entre 1998 e 2003 em dez fazendas de seis estados brasileiros. Os componentes de (co)variância foram estimados pela metodologia REML em análises uni, bi e trivariadas, utilizando-se modelos animal. As estimativas de herdabilidade do efeito direto com os respectivos erros-padrão foram: ALT 0,63 (0,09), P120 0,25 (0,03), P210 0,34 (0,03), P365 0,45 (0,04), P450 0,48 (0,04), P550 0,49 (0,04), CE365 0,48 (0,04), CE450 0,53 (0,04) e CE550 0,42 (0,09). As correlações genéticas entre a ALT e as variáveis P120, P210, P365, P450 e P550 foram de 0,68; 0,64; 0,53; 0,58 e 0,59, respectivamente. As associações genéticas do P120 com as CE ajustadas para peso e idade foram próximas de zero, entretanto, essas correlações foram positivas e moderadas, quando as CE foram ajustadas somente pela idade. As correlações genéticas da ALT com as CE, quando ajustadas para peso e idade, foram: -0,19 (CE365), -0,24 (CE450) e 0,00 (CE550). Utilizando um modelo que não incluiu o peso do animal como covariável, as correlações genéticas das CE com a ALT foram: 0,21 (CE365), 0,12 (CE450) e 0,39 (CE550). Essas estimativas indicam que as características de crescimento e CE apresentam variabilidade genética na raça Nelore, podendo ser incluídas em programas de melhoramento genético, e a seleção para peso em qualquer idade deve acarretar aumento na estatura dos animais. Desta forma, para obtenção de animais com tamanho e peso adequados ao sistema de produção, faz-se necessária a utilização de um índice de seleção aliando estas características.

Valor nutritivo do resíduo do processamento do caroço de algodão suplementado com levedura e avaliado em bovinos

O objetivo neste trabalho foi avaliar o consumo, a digestibilidade total e parcial da matéria seca (MS) e dos nutrientes e os parâmetros ruminais de novilhos alimentados com rações à base de resíduo do processamento do caroço de algodão (RPCA) suplementado com levedura seca de cana-de-açúcar. Foram utilizados seis novilhos Nelore canulados no rúmen e duodeno, alimentados com rações compostas de 80% RPCA e 20% concentrado, composto de milho, ureia e levedura nos níveis de 0, 20 ou 40%. O delineamento experimental adotado para análise do consumo e da digestibilidade foi em blocos casualisados e a análise dos parâmetros ruminais foi em parcela subdividida. Os consumos e a digestibilidade de nutrientes não foram influenciados pela suplementação com levedura, fato que pode estar relacionado ao alto valor da fração C do resíduo do processamento do RPCA (44,51% MS) e à baixa fração proteica de lenta degradação da levedura, que impediu a sincronização energia/nitrogênio para maior degradação do resíduo. O pH do líquido ruminal decresceu linearmente nos animais mantidos com as dietas suplementadas com levedura. em todas as dietas, o pH e a concentração de N-NH3 foram adequados para o crescimento microbiano. As concentrações ruminais de acetato, propionato, butirato e ácidos graxos voláteis totais e a relação acetato:propionato não foram influenciadas pela suplementação com levedura. O resíduo do processamento do caroço de algodão é uma opção a ser utilizada no arraçoamento de bovinos.

Estimativas de herdabilidade e correlações para escores visuais, peso e altura ao sobreano em rebanhos da raça Nelore

Os objetivos neste trabalho foram avaliar as relações entre os escores visuais de estrutura corporal, precocidade e musculosidade ao sobreano (aproximadamente 550 dias de idade) com características de crescimento para verificar as possibilidades de utilizar essas características como critérios de seleção. Foram obtidas estimativas dos componentes de covariâncias por máxima verossimilhança restrita empregando-se um modelo animal com o efeito fixo de grupo contemporâneo e a idade como covariável (efeitos linear e quadrático). Os grupos contemporâneos foram definidos pelas variáveis: sexo; ano, estação e fazenda de nascimento; e fazenda e grupo de manejo aos 120, 210, 365 e 550 dias de idade. Foram utilizadas 1.367 observações de estrutura corporal, precocidade e musculosidade. As estimativas de herdabilidade foram de 0,24 ± 0,09 para estrutura corporal; 0,63 ± 0,12 para precocidade e 0,48 ± 0,11 para musculosidade, e as estimativas de correlações genéticas entre os escores foram 0,49 entre estrutura corporal e precocidade; 0,63 entre estrutura corporal e musculosidade; e 0,90 entre precocidade e musculosidade. As correlações genéticas entre os escores de estrutura corporal, precocidade e musculosidade, e o peso ao sobreano foram todas positivas (0,83; 0,42 e 0,50, respectivamente), enquanto as estimativas de correlações genéticas entre altura de posterior e os escores de estrutura corporal, precocidade e musculosidade, respectivamente, foram 0,57, -0,29 e -0,33. As características estrutura corporal, precocidade e musculosidade ao sobreano apresentaram variação genética aditiva de moderada a alta. As correlações genéticas dos escores com altura do posterior indicam que a seleção de animais mais altos, ainda que indireta, pode ocasionar aumento da estrutura corporal média dos animais, que poderão ser menos precoces e menos musculosos ao sobreano. A seleção para os escores visuais, principalmente para estrutura corporal, deve promover aumento no peso ao sobreano dos animais.

Influência da altura das garras dos pneus de um trator em área de plantio direto

This work was carried out to evaluate the performance of a farm tractor fitted with two sets of tires with high lugs and another set of tires with tallow lugs in straw without tillage (corn straw). The travel speeds used were approximately 4, 5, 6 and 7 km h(-1) and a constant pulling force of 25 kN was fixed. Tractor traction, forward speed, slip and consumption of fuel were measured and drawbar power, the ratio between the consumption and power and traction coefficient were calculated. It was observed that the tractor performance was similar to high and low lug tire conditions, in an area covered with corn straw.

Aproveitamento de resíduo de caulim em cerâmica branca

The world market of Kaolin has been growing as new investments for better quality of materials have been applied. This market produces amounts of dross that are put in the environment in a wrong way, causing damages to it. Trying to reduce these damages, researches have been done in an attempt to use kaolin dross in ceramic. The disposal of kaolin dross in the environment by the industries of the states of Rio Grande do Norte and Paraiba have great impact in society. Usually this dross is disposed clandestinely in places like roads, river banks and lands of small cities. The present work shows the characteristics of the kaolin produced by the mining company in Junco do Seridó, Paraiba state, western Seridó, 300 km from Natal, in the border of both states. After that, researches were done to study its physical and the chemistry characteristics, trying to see if it can be used in white ceramic. The samples got were bolted in fabric of 325# . The technological characteristics tried to use it as a product in white ceramic. For that, it was made a haracterization of the subject matter through enlargement analyses, ATG and ATD, elaborating three formulations that were burned in four different temperatures, 1175, 1200, 1250 and 1300 degrees centigrade up to 30 minutes. After the burning, the subjects were submitted to water absorbing tests, linear retreating, apparent porosity, apparent specific mass, resistance to flexibility and MEV. For one of the mixtures it was obtained demanded properties for a semi porous material

Estudo do efeito da substituição de caulim por resíduo de caulim na fabricação de cerâmica de revestimento

Companies involved in kaolin mining and treatment represent an important area of industrial development in Brazil, significantly contribution to the worldwide production of such mineral. As a result, large volumes of kaolin residue are constantly generated and abandoned in the environment, negatively contributing to its preservation. In this scenario, the objective of the present study was to characterize the residue generated from kaolin mining as well as to assess its potential use as raw material for the production of ceramic tiles. Ceramic mixtures were prepared from raw materials characterized by X-ray fluorescence, X-ray diffraction, particle size analysis and thermal analysis. Three compositions were prepared using kaolin residue contents of 10%, 20% and 30%. Samples were uniaxially pressed, fired at 1200ºC and characterized aiming at establishing their mineralogical composition, water absorption, apparent porosity, specific mass, linear retraction and modulus of rupture. The results showed that the residue basically consisted of kaolinite and successfully replaced raw kaolin in the preparation of ceramic title formulations without significantly affecting the properties of the fired material

Efeito da introdução de resíduo de cinza de forno cerâmico em massa para cerâmica estrutural

The red ceramics and structural ceramics, as they are known, include ceramic materials made by blocks of seals and structures, bricks, tiles, smail flagstones manacles, rustic floors and ornamental materials. Their fabrication uses raw material such as clay and clay sites, with some content of impurity. It has good durability and mechanical strength to compression, low cost, making it one of the mainly used materials in civil engineering. The incorporation of many industrial activities residue to ceramic products is a technological alternative for reducing the environmental impact caused by its carefree disposal. This incorporation can promote chemical change and inertness of metals from residue, by fixation in the glassy phase of ceramic during the burning stage. The main aim of this project is to study the technical feasibility of the addition of ceramic oven ash into formulations of mass for structural ceramics. In this project two kinds of clay (plastic and non-plastic) were used, as well as the ash from firewood used in the process of burning of structural ceramics. A group of experiments was outlined, which permitted the evaluation of the influence of the burning cycle in different temperatures of the ash content in formulations for ceramic blocks through technological properties, mechanical behavior and microstructure. Five samples were processed of each one of the masses of plastic and non-plastic clay without addition of ash and with addition of ash on the percentages of 10 % and 20 %, for temperatures of 850 °C, 950 °C, 1050 °C and 1150 °C, obtained through sinterization process. Among the studied compositions, the one which presented best performance was the mass of clay with 10 % of ash, at temperature of 1150 °C, with the smallest absorption of water, the smallest apparent porosity, specific apparent mass a bit over the others and greatest mechanical resistance to flexion. The composition made confirmed the technical feasibility of the use of ash in the mass for structural ceramics with maintenance of its necessary characteristics for its purposes

Estudo do aproveitamento de resíduo de gesso como carga para compósito com matriz de resina expansiva de mamona

In the execution of civil engineering works, either by wasting during the coating of wall or demolition of gypsum walls, the generation of the gypsum waste involves serious environmental concerns. These concerns are increased by the high demand of this raw material in the sector and by the difficulties of proper disposal byproduct generated. In the search for alternatives to minimize this problem, many research works are being conducted, giving emphasis in using gypsum waste as fillers in composites materials in order to improve the acoustic, thermal and mechanical performances. Through empirical testing, it was observed that the crystallization water contained in the residue (CaSO4.2H2O) could act like primary agent in the expanding of the polyurethane foam. Considering that polyurethane produced from vegetable oils are biodegradable synthetic polymers and that are admittedly to represent an alternative to petrochemical synthetic polyurethane, this research consist an analysis of the thermal behavior of a composite whose matrix obtained from a resin derived from the expansive castor oil seed, with loads of 4%, 8%, 12% and 16% of gypsum waste replacing to the polyol prepolymer blend. Contributors to this analysis: a characterization of the raw material through analysis of spectroscopy by Fourier transform infrared (FTIR), chemical analysis by X-Ray Fluorescence (XRF) and mineralogical analysis by X Ray Diffraction (XRD), complemented by thermo gravimetric analysis (TGA). In order to evaluate the thermo physical properties and thermal behavior of the composites manufactured in die closed with expansion contained, were also carried tests to determine the percentage of open pore volume using a gas pycnometer, scanning electronic microscopy (SEM), in addition to testing of flammability and the resistance to contact with hot surfaces. Through the analysis of the results, it appears that it is possible to produce a new material, which few changes in their thermo physical properties and thermal performance, promotes significant changes and attractive to the environment

Estudo do potencial de utilização do resíduo da extração de esmeraldas na fabricação de cerâmica de revestimento

Companies involved in emerald mining and treatment represent an important area of industrial development in Brazil, with significative contribution to the worldwide production of such mineral. As a result, large volumes of emerald waste are constantly generated and abandoned in the environment, negatively contributing to its preservation. By the other side the interest of the use of mining waste as additive in ceramic products has been growing from researchers in recent years. The ceramic industry is constantly seeking to the marked amplification for the sector and perfecting the quality of the products and to increase the variety of applications. The technology of obtaining of ceramic tiles that uses mining residues assists market niches little explored. In this scenario, the objective of the present study was to characterize the residue generated from emerald mining as well as to assess its potential use as raw material for the production of ceramic tiles. Ceramic mixtures were prepared from raw materials characterized by X-ray fluorescence, X-ray diffraction, particle size analysis and thermal analysis. Five compositions were prepared using emerald residue contents of 0%, 10%, 20%, 30% and 40%. Samples were uniaxially pressed, fired at 1000, 1100 and 1200ºC and characterized aiming at establishing their mineralogical composition, water absorption, apparent porosity, specific mass, linear retraction and modulus of rupture. The results shows that the emerald residue, basically consisted of 73% of (SiO2 + Al2O3) and 17,77% of (MgO + Na2O+ K2O) (that facilitates sintering), can be added to the ceramic tile materials with no detrimental effect on the properties of the sintered products

Estudo da introdução de resíduo de britagem de rocha calcária e cinza de biomassa de cana-de-açúcar em formulações de argamassas colantes

The adhesive mortars are a mixture of cement, sand, and additives to polymers that retain the mixing water and promotes adherence, being used in setting on various ceramic substrates. The sand used in the production of these mortars is from the riverbeds, and with the increasing restriction of these sands extraction by environmental agencies, and often having to be transported over long distances to the consumer center. This work aims to design and physical and mechanical characterization of ecological adhesive mortar with total replacement of natural sand by sand from the crushing of limestone, and the addition of mineral ash biomass of cane sugar in partial replacement cement used in the production of adhesive mortar , aiming compositions that meet the regulatory specifications for use adhesive mortar. Standardized tests to determine the tensile bond strength (NBR 14081-4), determination of open time (NBR 14081-3) and determination of slip (NBR 14081-5) were performed. Were also conducted trials squeeze flow in different formulation, the mortar with addition of 15 % gray biomass of cane sugar for cement mortars as well as the total replacement of natural sand by sand limestone crushing, got the best performance among the mortars studied, it was found that the addition of biomass to replace cement is perfectly feasible due to its pozzolanic activity, which contributed to this reduction in the cement matrix formation of adhesive mortar

Desenvolvimento de compósito de pu de mamona com carga de resíduo de couro para isolação térmica

The standardization of the bovine skin thickness in the leather industry generates a residue known as wet-blue . At the end of twentieth century, the brazilian industry discarded about 131 thousand tons of this residue in nature, provoking a great environmental liability. In this paper is presented the analyses of the termophysical properties, thermal and volumetric expansion performance of a composite of vegetable resin of castor oil plant (Ricinus communis) with load of industrial residue of leather "wet-blue", for application as thermal isolation material of warm surfaces. There were considered four percentile levels of residue load in the proportions in mass of 0%, 5%, 10% and 15%, added to the expansible resin of castor oil plant in two configurations: sawed leather and crushed leather in a smaller particle (powder) by grinding in a mill of balls. Twenty-one proof bodies were produced for termophysical properties analysis (three for each configuration) and four proof bodies for rehearsals of thermal acting. Analyses of thermal acting were done in test cameras. The results of the rehearsals were compared to those obtained considering the castor oil plant foam without residue addition. A small reduction of the thermal conductivity of the composite was observed in the proportion of 10% of leather residue in both configurations. Regarding thermal conductivity, calorific capacity and diffusivity, it was verified that the proposed composite showed very close values to the commercial insulating materials (glass wool, rock wool, EPS). It was still demonstrated the technical viability of the use of composite as insulating thermal for systems of low potency. The composite presented larger volumetric expansion with 15% of sawed residue of leather.

Controle de plantas daninhas em arroz irrigado mediante o momento da admissão e da altura da lâmina de água

Este trabalho, desenvolvido ao nível de campo, na Fazenda Experimental Edgárdia, da Faculdade de Ciências Agronômicas da UNESP, Botucatu, no ano agrícola 1990/91, objetivou avaliar os efeitos do momento de admissão da água e da altura da lâmina de água sobre o desenvolvimento das plantas daninhas e os reflexos sobre as de arroz. O delineamento experimental usado foi de blocos ao acaso com parcelas subsubdivididas. Às parcelas, corresponderam os momentos de admissão de água M1, M2 e M3, respectivamente, 15, 42 e 74 dias após a emergência das plantas de arroz. As subparcelas corresponderam às alturas das lâminas de água L5, L10 e L15, respectivamente, 5, 10 e 15 cm e as subsubparcelas, a dois sistemas de condução: com capina (cc) e sem capina (sc). Verificou-se que o desenvolvimento das plantas daninhas foi afetado tanto pelo momento de admissão de água como pela altura da lâmina de água sendo a produção de grãos reduzida 61,5% devido à competição das plantas daninhas com a cultura.

Obtenção e caracterização de extrato microencapsulado de resíduo agroindustrial de acerola

Acerola (Malpighia emarginata D.C.) is a red fruit widely cultivated in Brazil, especially in the Northeastern region. Its increasing demand is attributed to its high ascorbic acid contents. Besides ascorbic acid, widely known by its health-benefit effects, acerola is rich in anthocyanins, which contribute for the antioxidant power of the fruit. Acerola processing produces a bright-red pomace, usually discarded. The further processing of this pomace, in order to explore its antioxidant compounds, could enhance acerola market value and rentability of its processing. Both ascorbic acid and anthocyanins are highly susceptible to degradation, that can be delayed by microencapsulation, which consists on packing particles (core) in an edible matrix (wall material). This work has been made with the purpose of producing a microencapsulated acerola pomace extract, which could be used by the food industry as a functional ingredient with antioxidant and coloring properties. Antioxidant compounds were recovered by pressing the pomace diluted in a solvent (a citric acid aqueous solution), by using a central composite design, with two variables: citric acid concentration in the solvent (0-2%), and solvent: pomace mass ratio (2:1-6:1). The acerola pomace extract was then microencapsulated by spray drying. A central composite design was adopted, with three variables: inlet temperature of the spray dryer (170o-200oC), wall material: acerola solids mass ratio (2:1-5:1), and degree of maltodextrin replacement by cashew tree gum as wall material (0-100%). The cashew tree gum was used because of its similarity to arabic gum, which is regarded as the wall material by excellence. The following conditions were considered as optimal for extraction of anthocyanins and ascorbic acid: solvent/pomace ratio, 5:1, and no citric acid in the solvent. 82.47% of the anthocyanins were recovered, as well as 83.22% of the ascorbic acid. Anthocyanin and ascorbic acid retentions were favored by lower inlet temperatures, higher wall material: acerola solids mass ratio and higher maltodextrin replacement by cashew tree gum, which was presented as a promising wall material. The more adequate microencapsulation conditions, based not only on retention of antioxidant compounds but also on physical properties of the final powder, were the following: inlet temperature, 185oC; wall material: acerola solids mass ratio, 5:1, and minimum degree of maltodextrin replacement by cashew tree gum, 50%