978 resultados para Adjacent teeth
Resumo:
This report is the outcome of the fourth PICES Workshop on “The Okhotsk Sea and Adjacent Waters” held August 27–29, 2008, in Abashiri, Japan. (PDF contains 319 pages)
Resumo:
Abstract: To study the effects of spudcan penetration on the adjacent foundations of offshore platforms, experiments and numerical simulations (using business software ABAQUS) are carried out. It is shown that the penetration of spudcan can cause the soil layer affected in an annular zone. The affected zone has a maximum width of one times the diameter of the spudcan. The deflection of the platform’s foundation increases with the penetration of spudcan. The smaller the density of soil layer is, the bigger the displacement of the foundation is. However, the maximum displacement at the top of the foun- dation changes little once the penetration depth is over a critical value. The bigger the diameter and the penetration depth of the spudcan are, the bigger the displacements of the foundation are.
Resumo:
O objetivo deste estudo foi comparar os resultados da microinfiltração marginal obtidos por diferentes meios de aquisição de imagens e métodos de mensuração da penetração de prata em restaurações de resina composta classe V, in vitro. Dezoito pré-molares humanos hígidos, recém extraídos, foram divididos em três grupos, de acordo com o tipo de instrumento para preparação cavitária utilizado. Grupo 1: ponta diamantada número 3100, em alta rotação. Grupo 2: broca carbide número 330, em alta rotação. Grupo 3: ponta CVDentus código 82137, em aparelho de ultrassom. Foram realizados preparos cavitários padronizados (3x4x2mm) classe V nas faces vestibular e lingual de todos os dentes, com margens oclusais em esmalte e cervicais em dentina/cemento. As cavidades foram restauradas com o sistema adesivo Solobond M (VOCO) e resina composta Grandio (VOCO), a qual foi inserida e fotoativada em três incrementos. Os corpos de prova ficaram imersos em água destilada por 24h a 37oC; receberam acabamento e polimento com discos SofLex (3M) e foram novamente armazenados em água destilada, por sete dias. Posteriormente, as superfícies dentárias foram coberta com duas camadas de esmalte para unhas vermelho, exceto as áreas adjacentes às restaurações. Os espécimes ficaram imersos em solução aquosa de nitrato de prata a 50% por 24h e em solução fotorreveladora por 2h e foram seccionados no sentido vestíbulo-lingual, passando pelo centro das restaurações, com disco diamantado em baixa rotação. As amostras foram polidas em politriz horizontal e analisadas por diferentes métodos. À extensão da microinfiltração foi atribuído escores de 0 a 3 através de análises por meio de estereomicroscópio tradicional e com leds e microscópio ótico. As imagens obtidas na lupa com leds e no microscópio ótico tiveram as áreas infiltradas medidas através do software AxioVision. O teste χ2 de McNemar-Bowker revelou concordância estatística entre estereomicroscópio tradicional e o com leds (p=0,809) durante análises semiquantitativas. Porém, houve diferenças significantes entre microscópio ótico e estereomicroscópios (p<0,001). Houve boa correlação entre análises semiquantitativas e quantitativas de acordo com o teste de Spearmann (p<0,001). O teste de Kruskall-Wallis não revelou diferenças estatisticamente significantes (p=0,174) entre os grupos experimentais na análise quantitativa por microscópio ótico, em esmalte. Ao contrário do que se observa com a mesma em lupa (p<0,001). Conclui-se que o método de atribuição de escores comumente aplicado com a lupa nos estudos da microinfiltração marginal é uma opção confiável para análise da microinfiltração.
Resumo:
The digital holographic interferometry is used in the dynamic and static measurements of phase variation induced by domain inversion. For the first time, to the authors' knowledge, they observe the existence of ridge-shape phase distribution adjacent to 180 degrees domain wall in congruent LiNbO3 crystal. During the domain wall motion, the phase variations are not uniform but have obvious relaxations. In the static measurement, the ridge elevation can vary linearly with the uniform electric field. The reasonable assumptions are proposed to explain these effects. (c) 2006 American Institute of Physics.
Resumo:
The pulsed neutron technique has been used to investigate the decay of thermal neutrons in two adjacent water-borated water finite media. Experiments were performed with a 6x6x6 inches cubic assembly divided in two halves by a thin membrane and filled with pure distilled water on one side and borated water on the other side.
The fundamental decay constant was measured versus the boric acid concentration in the poisoned medium. The experimental results showed good agreement with the predictions of the time dependent diffusion model. It was assumed that the addition of boric acid increases the absorption cross section of the poisoned medium without affecting its diffusion properties: In these conditions, space-energy separability and the concept of an “effective” buckling as derived from diffusion theory were introduced. Their validity was supported by the experimental results.
Measurements were performed with the absorption cross section of the poisoned medium increasing gradually up to 16 times its initial value. Extensive use of the IBM 7090-7094 Computing facility was made to analyze properly the decay data (Frantic Code). Attention was given to the count loss correction scheme and the handling of the statistics involved. Fitting of the experimental results into the analytical form predicted by the diffusion model led to
Ʃav = 4721 sec-1 (±150)
Do = 35972 cm2sec-1 (±800) for water at 21˚C
C (given) = 3420 cm4sec-1
These values, when compared with published data, show that the diffusion model is adequate in describing the experiment.
Resumo:
An exact solution to the monoenergetic Boltzmann equation is obtained for the case of a plane isotropic burst of neutrons introduced at the interface separating two adjacent, dissimilar, semi-infinite media. The method of solution used is to remove the time dependence by a Laplace transformation, solve the transformed equation by the normal mode expansion method, and then invert to recover the time dependence.
The general result is expressed as a sum of definite, multiple integrals, one of which contains the uncollided wave of neutrons originating at the source plane. It is possible to obtain a simplified form for the solution at the interface, and certain numerical calculations are made there.
The interface flux in two adjacent moderators is calculated and plotted as a function of time for several moderator materials. For each case it is found that the flux decay curve has an asymptotic slope given accurately by diffusion theory. Furthermore, the interface current is observed to change directions when the scattering and absorption cross sections of the two moderator materials are related in a certain manner. More specifically, the reflection process in two adjacent moderators appears to depend initially on the scattering properties and for long times on the absorption properties of the media.
This analysis contains both the single infinite and semi-infinite medium problems as special cases. The results in these two special cases provide a check on the accuracy of the general solution since they agree with solutions of these problems obtained by separate analyses.
Resumo:
Limnetic crustaceans (i.e. those which live in the open water of lakes and ponds) were investigated in Esthwaite water and adjacent lakes. These are represented by two groups, Copepoda and Cladocera.
Resumo:
We evaluated the effectiveness of wooden artificial reefs (ARs) as fish habitat. Three types of ARs, made of cedar logs, broadleaf tree logs, and PVC pipes, respectively, were deployed in triplicate at 8-m depth off Maizuru, Kyoto Prefecture, Sea of Japan, in May 2004. Fish assemblages associated with each of the nine ARs were observed by using SCUBA twice a month for four years. Fish assemblages in the adjacent habitat were also monitored for two years before and four years after reef deployment. In the surveyed areas (ca. 10 m2) associated with each of the cedar, broadleaf, and PVC ARs, the average number of fish species was 4.14, 3.49, and 3.00, and the average number of individuals was 40.7, 27.9, and 20.3, respectively. The estimated biomass was also more greater when associated with the cedar ARs than with other ARs. Visual censuses of the habitat adjacent to the ARs revealed that the number of fish species and the density of individuals were not affected by the deployment of the ARs. Our results support the superiority of cedar as an AR material and indicate that deployment of wooden ARs causes no reduction of fish abundance in adjacent natural reefs.
Resumo:
The contribution of the no-take marine reserve at Apo Island, Philippines, to local fishery yield through “spillover” (net export of adult fish) was estimated. Spatial patterns of fishing effort, yield, and catch rates around Apo Island were documented daily in 2003−2004. Catch rates were higher near the reserve (by a factor of 1.1 to 2.0), but fishing effort was often lowest there. Higher catch rates near the reserve were more likely due to spillover than to low fishing intensity. Lower fishing effort near the reserve may have been due to 1) weather patterns, 2) traditional importance of other fishing grounds, 3) high variability in catch rates, 4) lower market value of target species, and 5) social pressures. The yield taken near the reserve was only 10% of the total yield, but the actual spillover contribution was probably much less than this. This study is one of the few to estimate the spillover contribution to overall yield and to document the responses of fishermen to spil
Resumo:
This contribution is a summary of the results of the study conducted by the University of the Philippines in the Visayas team from November 1990 to June 1991. The purpose of this research is to estimate demand and output supply elasticities in gillnet and seine fishing in Guimaras Strait (Philippines) and adjacent waters.