Przewalskin A: A new C-23 terpenoid with a 6/6/7 carbon ring skeleton from Salvia przewalskii maxim

Przewalskin A (1), a novel C-23 terpenoid with a 6/6/7 carbon ring skeleton, was isolated from Salvia przewalskii. Its structure was determined by comprehensive 1D NMR, 2D NMR, and MS spectroscopic analysis and subsequently confirmed by a single-crystal X

Report of the pilot EAFM course, 23-28 June, 2013, Kota Kinabalu, Malaysia

Participants were exposed to concepts and information about EAFM using a structured, participatory method of delivery. The learning strategy involved pre- and post-course assessment as well as 4-6 month follow up at outcome level to assess improves EAFM practices. The report outlines methodology details of content and the daily feedback process.

Report of the final workshop on education, capacity development and monitoring in support of Bar Reef Marine Sanctuary (BRMS) management, Kalpitiya, Sri Lanka, 23 May, 2015

Objectives of the workshop included: presentation of research to stakeholders; briefing of stakeholders on project objectives, contents and activities; to get stakeholder perceptions and suggestions.

Hierarchical electrohydrodynamic structures for surface-enhanced Raman scattering (adv. Mater. 23/2012).

On page OP 175, U. Steiner and co-workers destabilise polymer trilayer films using an electric field to generate separated micrometre-sized core-shell pillars, which are further modified by selective polymer dissolution to yield polymer core columns surrounded by a rim and micro-volcano rim structures. When coated with gold and decorated with Raman active probes, all three structure types give rise to substantial enhancement in surface-enhanced Raman scattering (SERS). Since this SERS enhancement arises from each of the isolated structures in the array, these surface patterns are an ideal platform for multiplexed SERS detection.

Co-Si多层膜在稳态热退火中的固相界面反应

于2010-11-23批量导入

用VHDL实现的23位快速浮点数加减法器

With the development of LSI, FPGA/CPLD has been used more and more in the fields of digital signal processing and au-tocontrol and so on. And with the development of the techniques of digital processing, for fitting the system’s function, it should be a higher requirement to speed and used-resource to compute the floating point numbers. The author introduces a high speed adder-subtracter of the 23 bit’s floating point numbers, which is carried out with the parallel arithmetic and the computational speed cou...中文文摘：随着大规模集成电路的不断发展,FPGA/CPLD在数字信号处理、自动控制等方面得到了越来越多的应用。并且伴随着数字化处理技术的不断发展,为满足系统功能的要求,对浮点数运算的速度以及相应占用的资源也就提出了更高的要求。笔者即介绍了以VHDL语言为基础,采用并行算法且计算速度达到33MHz的,对23位标准浮点数实现的高速浮点加减法运算器,并以Cyclone II芯片EP2C20F484为硬件环境,最终进行时序模拟仿真,从而验证该浮点加减法器的正确性和快速特性。

Xe~(23+)离子辐照Al_2O_3的光谱特性

本工作研究460 keV、3 MeV和308 MeV Xe23+辐照Al2O3单晶样品的光致发光特性。从经过460 keV Xe23+辐照后样品的光致发光测试结果可看到,波长为380、413和450 nm的发光峰明显增强,在390和564 nm处出现了新的发光峰。从3 MeV的Xe23+辐照后样品谱的变化可看到,在较低剂量条件下,516 nm(2.4 eV)和564 nm(2.2 eV)处的发光峰随辐照剂量增加而增强,且当剂量增到1×1016cm-2时,564 nm处的发光峰消失,只有516 nm(2.4 eV)处的发光峰较强。从308 MeV Xe23+辐照后样品的光致发光谱中可看到,357 nm(3.47 eV)和516 nm(2.4 eV)处的发光峰随着剂量增加明显增强。辐照后样品的FTIR谱显示:波数在460~510 cm-1和630 cm-1附近的吸收是Al2O3振动模式,经离子辐照后,吸收带展宽;1 000~1 300 cm-1间为Al—O—Al桥氧键的伸缩振动模式,高能辐照后的吸收带向低波数方向移动。

质子与重离子肿瘤治疗的进展

简要介绍了质子与重离子肿瘤治疗的历史和现状. 现在, 全世界有质子治疗中心 23家,治疗肿瘤患者总数为 39 612人; 重离子治疗设备有 3台, 治疗肿瘤患者 4 511人(包括He离子治疗2 054例病人).

~(22)Na(p,γ)~(23)Mg反应的实验研究

讨论了目前有关2 2 Na(p ,γ) 2 3Mg反应的实验研究工作 ,结合兰州放射性束流线上的放射性束流2 3Al的β+延发质子衰变实验的测量结果 ,给出了2 3Al延发衰变的质子能谱 ,并比较了近期实验给出的相关能级的自旋、宇称值 ,正是由于这种自旋、宇称和能级部分宽度的不确定性 ,导致了反应率计算的不确定性 .计算了同位旋相似态的共振强度 .对于测量到的新的延发衰变能级Ed =8.91 6MeV ,由于没有相应的能级宽度值 ,实验仅给出其相对共振强度值